arXiv subjects

Martin J. Booth

Publications and source records attributed to Martin J. Booth.

At least 19 recordsLinked to original sources

arXiv2026

Sapphire Photonic Crystal Fiber Sensor

Sapphire optical fiber shows great promise for remote sensing in extreme environments approaching 2000 degC, by using laser-processing to form a single-mode waveguide within it. However, for practical application, longer devices with high manufacturability and reliability are required. We report the design, modeling, fabrication, and optimization of an index-guiding sapphire photonic crystal fiber Bragg grating temperature sensor. The device is fabricated using femtosecond laser direct writing to inscribe both the photonic crystal waveguide and the Bragg grating. A spatial light modulator was used to compensate for the mismatch between the immersion objective and the high-index oil used. This improved the aspect ratio and suppressed cracking during fabrication, for higher reliability. The design results in a 6-fold reduction in fabrication time over an equivalent depressed cladding waveguide, significantly reducing the cost of manufacture. Devices up to 7 cm long were fabricated and spliced to standard single-mode fiber. The propagation loss was estimated to be 0.7 dB/cm and the Bragg gratings had a bandwidth of approximately 0.12 nm. Devices were tested in a furnace showing a temperature sensitivity of between 19.0-32.3 pm/degC over a range 25-1200 degC. These longer devices have the potential to enable practical high precision extreme temperature monitoring in many applications, with lower manufacturing cost and higher reliability.

physics.optics↗

arXiv2026

Straight Directional Couplers via Scan-Engineered Index Control

A novel design for straight directional waveguide couplers and interferometers is demonstrated in glass, fabricated using femtosecond laser direct writing and operating at telecommunication wavelengths (~1550 nm). The devices consisted of parallel waveguides with a spacing of 15 um, where the coupling strength was controlled by scan-engineered refractive index modulation along the length of the waveguide. Using this approach, we realized a 50:50 directional coupler formed by two identical waveguides with a footprint of < 40 um x 15 um x 6 mm, as well as a Mach-Zehnder interferometer with unbalanced arms. A waveguide array with 15 um spacing was also demonstrated, highlighting the potential for compact, high-density, and three-dimensional photonic integration.

physics.optics↗

arXiv2026

Depth-adapted adaptive optics for three-photon microscopy

Three-photon (3-P) fluorescence microscopy enables deep in vivo imaging with subcellular resolution, but its performance is fundamentally constrained by the maximum permissible laser power required to avoid tissue heating and photodamage. Under these power-limited conditions, fluorescence signal generation, image contrast, and achievable imaging depth are strongly affected by the illumination beam profile and aberration correction strategy. In this paper, we showed that using a fixed illumination beam size was suboptimal across different imaging depths. We further showed that conventional Zernike-based adaptive optics (AO) correction degrades under reduced Gaussian illumination beam sizes due to loss of modal orthogonality. This degradation results in slow convergence, unintended focal and field-of-view shifts, and excessive wavefront deformations. To overcome these limitations, we introduced a depth-adapted AO framework in which both the illumination beam profile and the aberration correction basis were dynamically matched to the imaging conditions. By combining depth-optimised beam underfilling with a bespoke set of illumination-matched aberration modes, we achieved faster and more stable AO convergence, enhanced fluorescence signal and image quality during deep in vivo multi-channel neuroimaging. Together, these results established a practical and robust AO-enabled three-photon microscopy strategy that maximised imaging performance under realistic power constraints.

physics.optics↗

arXiv2026

Tunable Dynamic Speckle Generation for Random Illumination Microscopy

Speckled illumination enhances widefield fluorescence microscopy by enabling optical sectioning and super resolution. In random illumination microscopy, sequences of speckled illumination patterns are used to excite fluorescent samples and images are reconstructed based on a statistical analysis of the intensity fluctuations. Although random illumination microscopy has been shown to give excellent performance, its widespread implementation is hindered by the high cost and complexity of the generation of suitable speckled illumination patterns, which is achieved using digital micro-mirror devices or spatial light modulators. Here, we present a zwitterion-doped liquid crystal (LC) device capable of generating independent, high-contrast speckle patterns with a tunable decorrelation time in the 0.1 s to 0.1 ms range under visible laser illumination. This LC-based dynamic speckle generator is applied to widefield random illumination fluorescence microscopy of tissue and cell samples, where it enables optical sectioning with a 2 micron axial resolution, and a 1.5-fold improvement in lateral spatial resolution. Owing to its low cost and simplicity, this LC speckle generator offers an attractive alternative to digital micro-mirror and spatial light modulator devices for implementing widefield random illumination microscopy.

physics.optics↗

arXiv2025

Laser written waveguides to the sample edge

A method is presented for fabrication of femtosecond laser written waveguides in glass to remove the need for polishing of substrates after processing. It is shown that by amplitude masking the fabrication laser beam near the sample edge and increasing the pulse energy it is possible to write waveguides that are not affected by edge aberrations and display mode profiles well matched to single mode fiber. Results are presented for different depths in fused silica and borosilicate glass substrates. The transmission from fiber to photonic circuit is significantly improved for situations where it is not possible to polish glass substrates after laser writing, creating new opportunities in photonic packaging.

physics.optics↗

arXiv2025

Raman Microspectroscopy for Real-Time Structure Indicator in Ultrafast Laser Writing

Femtosecond laser fabrication enables the creation of a wide range of devices, but its scalability and yield can be limited by the lack of real-time, in-situ monitoring tools. In particular, there is a strong need for metrics that directly correlate with device performance. Raman microspectroscopy provides a non-destructive route for in-situ characterization. Here, we demonstrate its potential to assess the electrical performance of laser-written graphitic electrodes in diamond. By combining hyperspectral mapping with electrical testing, we show that depletion of the 1332 cm$^{-1}$ sp3 Raman line serves as a monotonic and robust predictor of resistance, offering clear advantages over commonly used spectral features. We further introduce hyperspectral unmixing as a label-free approach to identify relevant spectral signatures in fabrication processes where Raman markers are less defined. Importantly, the methodology we present is not restricted to diamond but can be adapted to other host materials and functionalities, offering a practical path toward specification-driven fs-laser microfabrication.

physics.app-ph↗

arXiv2025

Single image sensorless adaptive optics using phase-diversified multifocal array

Image-based sensorless adaptive optics is commonly used to improve microscope image quality through aberration compensation. However, its sequential nature leads to repeated sample exposures and a prolonged aberration estimation and correction process. In this work, we used a phase-diversified foci array to enhance the aberration-related information in multi-photon fluorescence microscope images. We showed that, through use of a neural network-based image processing algorithm, we can extract aberration from a single image frame. We discussed how the number of foci can affect the wavefront correction on a bead sample, and we showed that six foci, in general, perform better than two-foci or ten-foci arrangements. We also applied our technique to correct aberrations in biological samples, including a fixed brain tissue and BPAE cells slide.

physics.optics↗

arXiv2025

Speckle suppression in digital in-line holographic microscopy through liquid crystal dynamic scattering

We demonstrate speckle noise reduction in an in-line holographic imaging system using a Zwitterion-doped liquid crystal dynamic scatterer (LCDS) cell diffuser. Integrated into a minimally modified bright-field microscope, the LCDS actively modulates system's spatial coherence. The proposed solution suppresses coherent artifacts without introducing bulky moving parts, while enhancing image resolution and preserving overall system simplicity. Quantitative performance tested on a phase and amplitude test targets, as well as phase-amplitude biological sample, shows significant noise reduction and methods versatility. Though validated in a holographic in-line setup, the approach is applicable to other imaging techniques requiring compact, vibration-free speckle suppression.

physics.optics↗

arXiv2025

Information-guided optimization of image-based sensorless adaptive optics methods

Adaptive optics (AO) are reconfigurable devices that compensate for wavefront distortions or aberrations in optical systems such as microscopes, telescopes and ophthalmoscopes. Aberrations have detrimental effects that can reduce imaging quality and compromise scientific information. Sensorless AO methods were introduced to correct aberrations without a separate wavefront sensor, inferring wavefront-related information directly from phase-diverse sample images. Most sensorless AO control systems, although effective and flexible to use, were operated based on empirical experience with suboptimal performance. In this paper, we introduced a Fisher information-based analysis framework to provide information-guided method optimization. Results suggested that our framework can effectively improve the accuracy and efficiency of different sensorless AO methods. The framework is not specific to any AO method or imaging modality and has the potential to benefit a wide range of applications.

physics.optics↗

arXiv2024

Laser-written scalable sapphire integrated photonics platform

In this paper, we demonstrate the integration of photonic devices on sapphire substrates using multi-layer depressed cladding waveguides at both 780 nm and 1550 nm. The devices are up to 10-cm long and written at depths down to 400 um. The propagation losses for single-mode guiding are ~ 0.6 dB/cm at 780 nm and ~ 0.7 dB/cm at 1550 nm. A number of structures have been fabricated with simultaneous single-mode and polarization independent operation: evanescently coupled waveguide arrays, Y-branch splitters, Mach-Zehnder interferometers, and a 2x2 directional-coupler. All the devices were fabricated using adaptive optics-assisted femtosecond laser direct writing with a customized laser writing algorithm. This work enables the integration of single-mode sapphire photonics devices in a scalable manner, enabling many applications in communications, imaging, computing, and sensing.

physics.optics↗

arXiv2024

Intensity adaptive optics

Adaptive optics (AO) is a powerful tool employed across various research fields, from aerospace to microscopy. Traditionally, AO has focused on correcting optical phase aberrations, with recent advances extending to polarisation compensation. However, intensity errors are also prevalent in optical systems, yet effective correction methods are still in their infancy. Here, we introduce a novel AO approach, termed intensity adaptive optics (I-AO), which employs a dual-feedback loop mechanism to first address non-uniform intensity distribution and subsequently compensate for energy loss at the pupil plane. We demonstrate that I-AO can operate in both sensor-based and sensorless formats and validate its feasibility by quantitatively analysing the focus quality of an aberrated system. This technique expands the AO toolkit, paving the way for next-generation AO technology.

physics.optics↗

arXiv2023

Polarization based modulation of splitting ratio in femtosecond laser direct written directional couplers

This work characterizes a phenomenon in direct laser written directional couplers where the splitting ratio for output light is dependent on the input polarization state. In general, for laser written waveguides, different coupling strengths exist for different polarization states of the input light. If the linear polarization state of the input light is not aligned with one of the symmetry axes of the system, an additional amplitude beating is imposed on the transfer of light in directional couplers of different interaction length. We present results for in-plane and out of plane directional couplers, which are supported by theoretical analysis. These new results provide insights for understanding and controlling polarization properties of directional couplers and larger photonic circuits.

physics.optics↗

arXiv2023

High-precision optical fiber sensing beyond 1000{\deg}C

Sapphire fiber can withstand around 2000{\deg}C, but it is multimoded, giving poor precision sensors. We demonstrate a single-mode sapphire fiber Bragg grating temperature sensor operating up to 1200{\deg}C. The repeatability above 1000{\deg}C is within {\pm}0.08%.

physics.optics↗

arXiv2023

High Speed Precise Refractive Index Modification for Photonic Chips through Phase Aberrated Pulsed Lasers

Integrated photonic chips have significant potential in telecommunications, classic computing, quantum systems, and topological photonics. Direct laser writing offers unique capability for creating three-dimensional photonic devices in an optical glass chip with quick prototyping. However, existing laser writing schemes cannot create index-modified structures in glass that precisely match the laser focal shape while also achieving high scanning speed and high refractive index contrast. Here, we introduce the theory of a refractive index modification scheme that combines the advantages of both traditional non-thermal and thermal regime fabrication methods. We also propose a model of waveguide formation that was verified through a thorough study on the effects of phase aberrations on the laser focus. The presented new photonic chip fabrication scheme uses a novel focal intensity distribution, where pulse energy is relocated to the bottom of a laser focus by manipulating primary and higher order spherical aberrations. The technique can produce index modifications with high scanning speed (20 mm/s or higher), high index contrast (16 x 10-3), and high precision to fabricate with arbitrary cross-sections. This method has potential to expand the capabilities of photonic chips in applications that require small-scale, high precision, or high contrast refractive index control.

physics.optics↗

arXiv2023

Universal adaptive optics for microscopy through embedded neural network control

The resolution and contrast of microscope imaging is often affected by aberrations introduced by imperfect optical systems and inhomogeneous refractive structures in specimens. Adaptive optics (AO) compensates these aberrations and restores diffraction limited performance. A wide range of AO solutions have been introduced, often tailored to a specific microscope type or application. Until now, a universal AO solution -- one that can be readily transferred between microscope modalities -- has not been deployed. We propose versatile and fast aberration correction using a physics-based machine learning (ML) assisted wavefront-sensorless AO control method. Unlike previous ML methods, we used a bespoke neural network (NN) architecture, designed using physical understanding of image formation, that was embedded in the control loop of the microscope. The approach means that not only is the resulting NN orders of magnitude simpler than previous NN methods, but the concept is translatable across microscope modalities. We demonstrated the method on a two-photon, a three-photon and a widefield three-dimensional (3D) structured illumination microscope. Results showed that the method outperformed commonly-used modal-based sensorless AO methods. We also showed that our ML-based method was robust in a range of challenging imaging conditions, such as extended 3D sample structures, specimen motion, low signal to noise ratio and activity-induced fluorescence fluctuations. Moreover, as the bespoke architecture encapsulated physical understanding of the imaging process, the internal NN configuration was no-longer a ``black box'', but provided physical insights on internal workings, which could influence future designs.

eess.IV↗

arXiv2023

Topologically controlled multiskyrmions in photonic gradient-index lenses

Skyrmions are topologically protected quasiparticles, originally studied in condensed-matter systems and recently in photonics, with great potential in ultra-high-capacity information storage. Despite the recent attention, most optical solutions require complex and expensive systems yet produce limited topologies. Here we demonstrate an extended family of quasiparticles beyond normal skyrmions, which are controlled in confined photonic gradient-index media, extending to higher-order members such as multiskyrmions and multimerons, with increasingly complex topologies. We introduce new topological numbers to describe these complex photonic quasiparticles and propose how this new zoology of particles could be used in future high-capacity information transfer. Our compact creation system lends integrated and programmable solutions of complex particle textures, with potential impacts on both photonic and condensed-matter systems for revolutionizing topological informatics and logic devices.

physics.optics↗

arXiv2022

Direct laser written aperiodic photonic volume elements for complex light shaping with high efficiency: inverse design and fabrication

Light plays the central role in many applications. The key to unlocking its versatility lies in shaping it into the most appropriate form for the task at hand. Specifically tailored refractive index modifications, directly manufactured inside glass using a short pulsed laser, enable an almost arbitrary control of the light flow. However, the stringent requirements for quantitative knowledge of these modifications, as well as for fabrication precision, have so far prevented the fabrication of light-efficient aperiodic photonic volume elements (APVEs). Here we present a powerful approach to the design and manufacturing of light-efficient APVEs. We optimize application-specific 3D arrangements of hundred thousands of microscopic voxels and manufacture them using femtosecond direct laser writing inside millimeter-sized glass volumes. We experimentally achieve unprecedented diffraction efficiencies up to 80%, which is enabled by precise voxel characterization and adaptive optics during fabrication. We demonstrate APVEs with various functionalities, including a spatial mode converter and combined intensity shaping and wavelength-multiplexing. Our elements can be freely designed and are efficient, compact and robust. Our approach is not limited to borosilicate glass, but is potentially extendable to other substrates, including birefringent and nonlinear materials, giving a preview of even broader functionalities including polarization modulation and dynamic elements.

physics.optics↗

arXiv2022

Full Poincaré polarimetry enabled through physical inference

While polarisation sensing is vital in many areas of research, with applications spanning from microscopy to aerospace, traditional approaches are limited by method-related error amplification or accumulation, placing fundamental limitations on precision and accuracy in single-shot polarimetry. Here, we put forward a new measurement paradigm to circumvent this, introducing the notion of a universal full Poincaré generator to map all polarisation analyser states into a single vectorially structured light field, allowing all vector components to be analysed in a single-shot with theoretically user-defined precision. To demonstrate the advantage of our approach, we use a common GRIN optic as our mapping device and show mean errors of <1% for each vector component, enhancing the sensitivity by around three times, allowing us to sense weak polarisation aberrations not measurable by traditional single-shot techniques. Our work paves the way for next-generation polarimetry, impacting a wide variety of applications relying on weak vector measurement.

physics.optics↗