arXiv subjects

Melkamu Belete

Publications and source records attributed to Melkamu Belete.

6 recordsLinked to original sources

arXiv2023

Resistive Switching and Current Conduction Mechanisms in Hexagonal Boron Nitride Threshold Memristors with Nickel Electrodes

The two-dimensional (2D) insulating material hexagonal boron nitride (h BN) has attracted much attention as the active medium in memristive devices due to its favorable physical properties, among others, a wide bandgap that enables a large switching window. Metal filament formation is frequently suggested for h-BN devices as the resistive switching (RS) mechanism, usually supported by highly specialized methods like conductive atomic force microscopy (C-AFM) or transmission electron microscopy (TEM). Here, we investigate the switching of multilayer hexagonal boron nitride (h-BN) threshold memristors with two nickel (Ni) electrodes through their current conduction mechanisms. Both the high and the low resistance states are analyzed through temperature-dependent current-voltage measurements. We propose the formation and retraction of nickel filaments along boron defects in the h-BN film as the resistive switching mechanism. We corroborate our electrical data with TEM analyses to establish temperature-dependent current-voltage measurements as a valuable tool for the analysis of resistive switching phenomena in memristors made of 2D materials. Our memristors exhibit a wide and tunable current operation range and low stand-by currents, in line with the state of the art in h-BN-based threshold switches, a low cycle-to-cycle variability of 5%, and a large On/Off ratio of 10${^7}$.

physics.app-ph↗

arXiv2020

Capacitance-Voltage (C-V) Characterization of Graphene-Silicon Heterojunction Photodiodes

Heterostructures of two-dimensional (2D) and three-dimensional (3D) materials form efficient devices for utilizing the properties of both classes of materials. Graphene/silicon (G/Si) Schottky diodes have been studied extensively with respect to their optoelectronic properties. Here, we introduce a method to analyze measured capacitance-voltage data of G/Si Schottky diodes connected in parallel with G/silicon dioxide/Si (GIS) capacitors. We also demonstrate the accurate extraction of the built-in potential ($Φ$$_{bi}$) and the Schottky barrier height from the measurement data independent of the Richardson constant.

physics.app-ph↗

arXiv2019

Electron Transport across Vertical Silicon / MoS${_2}$ / Graphene Heterostructures: Towards Efficient Emitter Diodes for Graphene-Base Hot Electron Transistors

Heterostructures comprising of silicon (Si), molybdenum disulfide (MoS${_2}$) and graphene are investigated with respect to the vertical current conduction mechanism. The measured current-voltage (I-V) characteristics exhibit temperature dependent asymmetric current, indicating thermally activated charge carrier transport. The data is compared and fitted to a current transport model that confirms thermionic emission as the responsible transport mechanism across the devices. Theoretical calculations in combination with the experimental data suggest that the heterojunction barrier from Si to MoS${_2}$ is linearly temperature dependent for T = 200 to 300 K with a positive temperature coefficient. The temperature dependence may be attributed to a change in band gap difference between Si and MoS${_2}$, strain at the Si/MoS${_2}$ interface or different electron effective masses in Si and MoS${_2}$, leading to a possible entropy change stemming from variation in density of states as electrons move from Si to MoS${_2}$. The low barrier formed between Si and MoS${_2}$ and the resultant thermionic emission demonstrated here makes the present devices potential candidates as the emitter diode of graphene-base hot electron transistors for future high-speed electronics.

physics.app-ph↗

arXiv2019

Nonvolatile Resistive Switching in Nanocrystalline Molybdenum Disulfide with Ion-Based Plasticity

Non-volatile resistive switching is demonstrated in memristors with nanocrystalline molybdenum disulfide (MoS$_2$) as the active material. The vertical heterostructures consist of silicon, vertically aligned MoS$_2$ and chrome / gold metal electrodes. Electrical characterizations reveal a bipolar and forming free switching process with stable retention for at least 2500 seconds. Controlled experiments carried out in ambient and vacuum conditions suggest that the observed resistive switching is based on hydroxyl ions (OH$^-$). These originate from catalytic splitting of adsorbed water molecules by MoS$_2$. Experimental results in combination with analytical simulations further suggest that electric field driven movement of the mobile OH$^-$ ions along the vertical MoS$_2$ layers influences the energy barrier at the Si/MoS$_2$ interface. The scalable and semiconductor production compatible device fabrication process used in this work offers the opportunity to integrate such memristors into existing silicon technology for future neuromorphic applications. The observed ion-based plasticity may be exploited in ionicelectronic devices based on TMDs and other 2D materials for memristive applications.

physics.app-ph↗

arXiv2015

Going Ballistic: Graphene Hot Electron Transistors

This paper reviews the experimental and theoretical state of the art in ballistic hot electron transistors that utilize two-dimensional base contacts made from graphene, i.e. graphene base transistors (GBTs). Early performance predictions that indicated potential for THz operation still hold true today, even with improved models that take non-idealities into account. Experimental results clearly demonstrate the basic functionality, with on/off current switching over several orders of magnitude, but further developments are required to exploit the full potential of the GBT device family. In particular, interfaces between graphene and semiconductors or dielectrics are far from perfect and thus limit experimental device integrity, reliability and performance.

cond-mat.mes-hall↗

arXiv2015

Bilayer Insulator Tunnel Barriers for Graphene-Based Vertical Hot-electron Transistors

Vertical graphene-based device concepts that rely on quantum mechanical tunneling are intensely being discussed in literature for applications in electronics and optoelectronics. In this work, the carrier transport mechanisms in semiconductor-insulator-graphene (SIG) capacitors are investigated with respect to their suitability as the electron emitter in vertical graphene base transistors (GBTs). Several dielectric materials as tunnel barriers are compared, including dielectric double layers. Using bilayer dielectrics, we experimentally demonstrate significant improvements in the electron injection current by promoting Fowler-Nordheim tunneling (FNT) and step tunneling (ST) while suppressing defect mediated carrier transports. High injected tunneling current densities approaching 10$^3$ A/cm$^2$ (limited by series resistance), and excellent current-voltage nonlinearity and asymmetry are achieved using a 1 nm-thick high quality dielectric, thulium silicate (TmSiO), as the first insulator layer, and titanium dioxide (TiO$_2$) as a high electron affinity second layer insulator. We also confirm the feasibility and effectiveness of our approach in a full GBT structure which shows dramatic improvement in the collector on-state current density with respect to the previously reported GBTs. The device design and the fabrication scheme have been selected with future CMOS process compatibility in mind. This work proposes a bilayer tunnel barrier approach as a promising candidate to be used in high performance vertical graphene-based tunneling devices.

cond-mat.mes-hall↗