arXiv subjects

Michael P. Lilly

Publications and source records attributed to Michael P. Lilly.

At least 19 recordsLinked to original sources

arXiv2025

Characterization of superconducting germanide and germanosilicide films of Pd, Pt, Rh and Ir formed by solid-phase epitaxy

Facilitated by recent advances in strained Ge/SiGe quantum well (QW) growth technology, superconductor-semiconductor hybrid devices based on group IV materials have been developed, potentially augmenting the functionality of quantum circuits. The formation of highly transparent superconducting platinum germanosilicide (PtSiGe) contacts to Ge/SiGe heterostructures by solid-phase epitaxy between Pt and SiGe has recently been reported, although with a relatively low critical temperature $<1\,\mathrm{K}$. Here, we present a comparative study of the superconducting properties of Pt, Pd, Rh, and Ir germanides, along with an in-depth characterization of Ir(Si)Ge films formed by solid-phase epitaxy. For films fabricated under optimal epitaxy conditions, we report $T_\mathrm{c}=3.4\,\mathrm{K}$ ($2.6\,\mathrm{K}$ for IrGe (IrSiGe). High-resolution scanning transmission electron microscopy (HRSTEM) and energy-dispersive X-ray spectroscopy (EDX) reveal that Ir reacts with Ge substrates to form a polycrystalline IrGe layer with a sharp IrGe/Ge interface.

cond-mat.supr-con↗

arXiv2024

Wide-field microwave magnetic field imaging with nitrogen-vacancy centers in diamond

Non-invasive imaging of microwave (MW) magnetic fields with microscale lateral resolution is pivotal for various applications, such as MW technologies and integrated circuit failure analysis. Diamond nitrogen-vacancy (NV) center magnetometry has emerged as an ideal tool, offering $μ$m-scale resolution, millimeter-scale field of view, high sensitivity, and non-invasive imaging compatible with diverse samples. However, up until now, it has been predominantly used for imaging of static or low-frequency magnetic fields or, concerning MW field imaging, to directly characterize the same microwave device used to drive the NV spin transitions. In this work we leverage an NV center ensemble in diamond for wide-field imaging of MW magnetic fields generated by a test device employing a differential measurement protocol. The microscope is equipped with a MW loop to induce Rabi oscillations between NV spin states, and the MW field from the device-under-test is measured through local deviations in the Rabi frequency. This differential protocol yields magnetic field maps of a 2.57 GHz MW field with a sensitivity of $\sim$ 9 $μ$T Hz$^{-1/2}$ for a total measurement duration of $T = 357$ s, covering a $340\times340$ $μ$m$^2$ field of view with a $μ$m-scale spatial resolution and a DUT input power dynamic range of 30 dB. This work demonstrates a novel NV magnetometry protocol, based on differential Rabi frequency measurement, that extends NV wide-field imaging capabilities to imaging of weak MW magnetic fields that would be difficult to measure directly through standard NV Rabi magnetometry.

physics.app-ph↗

arXiv2024

Cryogenic platform to investigate strong microwave cavity-spin coupling in correlated magnetic materials

We present a comprehensive exploration of loop-gap resonators (LGRs) for electron spin resonance (ESR) studies, enabling investigations into the hybridization of solid-state magnetic materials with microwave polariton modes. The experimental setup, implemented in a Physical Property Measurement System by Quantum Design, allows for ESR spectra at temperatures as low as 2 Kelvin. The versatility of continuous wave ESR spectroscopy is demonstrated through experiments on CuSO4.5H2O and MgCr2O4, showcasing the g-tensor and magnetic susceptibilities of these materials. The study delves into the challenges of fitting spectra under strong hybridization conditions and underscores the significance of proper calibration and stabilization. The detailed guide provided serves as a valuable resource for laboratories interested in exploring hybrid quantum systems through microwave resonators.

cond-mat.str-el↗

arXiv2023

Quantum Instrumentation Control Kit -- Defect Arbitrary Waveform Generator (QICK-DAWG): A Quantum Sensing Control Framework for Quantum Defects

Quantum information communication, sensing, and computation often require complex and expensive instrumentation resulting in a large entry barrier. The Quantum Instrumentation Control Kit (QICK) overcomes this barrier for superconducting qubits with a collection of software and firmware for state-of-the-art radio frequency system on chip (RFSoC's) field programmable gate architecture (FPGA) chips. Here we present a software and firmware extension to QICK, the Quantum Instrumentation Control Kit - Defect Arbitrary Waveform Generator (QICK-DAWG), which is an open-source software and firmware package that supports full quantum control and measurement of nitrogen-vacancy defects in diamond and other quantum defects using RFSoC FPGAs. QICKDAWG extends QICK to the characterization of nitrogen-vacancy defects and other diamond quantum defects by implementing DC-1 GHz readout, AOM or gated laser control, and analog or photon counting readout options. QICK-DAWG also adds pulse sequence programs and data analysis scripts to collect and characterize photoluminescence (PL) intensity, optically detected magnetic resonance (ODMR) spectra, PL readout windows, Rabi oscillations, Ramsay interference spectra, Hahn echo spin-spin relaxation times T$_2$, and spin-lattice relaxation times T$_1$. We demonstrate that QICK-DAWG is a powerful new paradigm of open source quantum hardware that significantly lowers the entry barrier and cost for quantum sensing using quantum defects.

quant-ph↗

arXiv2023

Fabrication of thin diamond membranes by Ne$^+$ implantation

Color centers in diamond are one of the most promising tools for quantum information science. Of particular interest is the use of single-crystal diamond membranes with nanoscale-thickness as hosts for color centers. Indeed, such structures guarantee a better integration with a variety of other quantum materials or devices, which can aid the development of diamond-based quantum technologies, from nanophotonics to quantum sensing. A common approach for membrane production is what is known as "smart-cut", a process where membranes are exfoliated from a diamond substrate after the creation of a thin sub-surface amorphous carbon layer by He$^+$ implantation. Due to the high ion fluence required, this process can be time-consuming. In this work, we demonstrated the production of thin diamond membranes by neon implantation of diamond substrates. With the target of obtaining membranes of $\sim$ 200 nm thickness and finding the critical damage threshold, we implanted different diamonds with 300 keV Ne$^+$ ions at different fluences. We characterized the structural properties of the implanted diamonds and the resulting membranes through SEM, Raman spectroscopy, and photoluminescence spectroscopy. We also found that a SRIM model based on a two-layer diamond/sp$^2$-carbon target better describes ion implantation, allowing us to estimate the diamond critical damage threshold for Ne$^+$ implantation. Compared to He$^+$ smart-cut, the use of a heavier ion like Ne$^+$ results in a ten-fold decrease in the ion fluence required to obtain diamond membranes and allows to obtain shallower smart-cuts, i.e. thinner membranes, at the same ion energy.

physics.app-ph↗

arXiv2023

Mitigation of Nitrogen Vacancy Ionization from Material Integration for Quantum Sensing

The nitrogen-vacancy (NV) color center in diamond has demonstrated great promise in a wide range of quantum sensing. Recently, there have been a series of proposals and experiments using NV centers to detect spin noise of quantum materials near the diamond surface. This is a rich complex area of study with novel nano-magnetism and electronic behavior, that the NV center would be ideal for sensing. However, due to the electronic properties of the NV itself and its host material, getting high quality NV centers within nanometers of such systems is challenging. Band bending caused by space charges formed at the metal-semiconductor interface force the NV center into its insensitive charge states. Here, we investigate optimizing this interface by depositing thin metal films and thin insulating layers on a series of NV ensembles at different depths to characterize the impact of metal films on different ensemble depths. We find an improvement of coherence and dephasing times we attribute to ionization of other paramagnetic defects. The insulating layer of alumina between the metal and diamond provide improved photoluminescence and higher sensitivity in all modes of sensing as compared to direct contact with the metal, providing as much as a factor of 2 increase in sensitivity, decrease of integration time by a factor of 4, for NV $T_1$ relaxometry measurements.

cond-mat.mes-hall↗

arXiv2022

Current Paths in an Atomic Precision Advanced Manufactured Device Imaged by Nitrogen-Vacancy Diamond Magnetic Microscopy

The recently-developed ability to control phosphorous-doping of silicon at an atomic level using scanning tunneling microscopy (STM), a technique known as atomic-precision-advanced-manufacturing (APAM), has allowed us to tailor electronic devices with atomic precision, and thus has emerged as a way to explore new possibilities in Si electronics. In these applications, critical questions include where current flow is actually occurring in or near APAM structures as well as whether leakage currents are present. In general, detection and mapping of current flow in APAM structures are valuable diagnostic tools to obtain reliable devices in digital-enhanced applications. In this paper, we performed nitrogen-vacancy (NV) wide-field magnetic imaging of stray magnetic fields from surface current densities flowing in an APAM test device over a mm-field of view with μm-resolution. To do this, we integrated a diamond having a surface NV ensemble with the device (patterned in two parallel mm-sized ribbons), then mapped the magnetic field from the DC current injected in the APAM device in a home-built NV wide-field microscope. The 2D magnetic field maps were used to reconstruct the surface current density, allowing us to obtain information on current paths, device failures such as choke points where current flow is impeded, and current leakages outside the APAM-defined P-doped regions. Analysis on the current density reconstructed map showed a projected sensitivity of ~0.03 A/m, corresponding to a smallest detectable current in the 200 μm-wide APAM ribbon of ~6 μA. These results demonstrate the failure analysis capability of NV wide-field magnetometry for APAM materials, opening the possibility to investigate other cutting-edge microelectronic devices.

physics.app-ph↗

arXiv2021

Nanoscale Solid-State Nuclear Quadrupole Resonance Spectroscopy using Depth-Optimized Nitrogen-Vacancy Ensembles in Diamond

Nuclear magnetic resonance (NMR) and nuclear quadrupole resonance (NQR) spectroscopy of bulk quantum materials have provided insight into phenomena such as quantum phase criticality, magnetism, and superconductivity. With the emergence of nanoscale 2-D materials with magnetic phenomena, inductively-detected NMR and NQR spectroscopy are not sensitive enough to detect the smaller number of spins in nanomaterials. The nitrogen-vacancy (NV) center in diamond has shown promise in bringing the analytic power of NMR and NQR spectroscopy to the nanoscale. However, due to depth-dependent formation efficiency of the defect centers, noise from surface spins, band bending effects, and the depth dependence of the nuclear magnetic field, there is ambiguity regarding the ideal NV depth for surface NMR of statistically-polarized spins. In this work, we prepared a range of shallow NV ensemble layer depths and determined the ideal NV depth by performing NMR spectroscopy on statistically-polarized \fluorine{} in Fomblin oil on the diamond surface. We found that the measurement time needed to achieve an SNR of 3 using XY8-N noise spectroscopy has a minimum at an NV depth of 5.4 nm. To demonstrate the sensing capabilities of NV ensembles, we perform NQR spectroscopy on the \boron{} of hexagonal boron nitride flakes. We compare our best diamond to previous work with a single NV and find that this ensemble provides a shorter measurement time with excitation diameters as small as 4 $μ$m. This analysis provides ideal conditions for further experiments involving NMR/NQR spectroscopy of 2-D materials with magnetic properties.

cond-mat.mes-hall↗

arXiv2021

A fitting algorithm for optimizing ion implantation energies and fluences

We describe a method to automatically generate an ion implantation recipe, a set of energies and fluences, to produce a desired defect density profile in a solid using the fewest required energies. We simulate defect density profiles for a range of ion energies, fit them with an appropriate function, and interpolate to yield defect density profiles at arbitrary ion energies. Given $N$ energies, we then optimize a set of $N$ energy-fluence pairs to match a given target defect density profile. Finally, we find the minimum $N$ such that the error between the target defect density profile and the defect density profile generated by the $N$ energy-fluence pairs is less than a given threshold. Inspired by quantum sensing applications with nitrogen-vacancy centers in diamond, we apply our technique to calculate optimal ion implantation recipes to create uniform-density 1 $μ$m surface layers of $^{15}$N or vacancies (using $^4$He).

cond-mat.mtrl-sci↗

arXiv2021

Effective out-of-plane g-factor in strained-Ge/SiGe quantum dots

Recently, lithographic quantum dots in strained-Ge/SiGe have become a promising candidate for quantum computation, with a remarkably quick progression from demonstration of a quantum dot to qubit logic demonstrations. Here we present a measurement of the out-of-plane $g$-factor for single-hole quantum dots in this material. As this is a single-hole measurement, this is the first experimental result that avoids the strong orbital effects present in the out-of-plane configuration. In addition to verifying the expected $g$-factor anisotropy between in-plane and out-of-plane magnetic ($B$)-fields, variations in the $g$-factor dependent on the occupation of the quantum dot are observed. These results are in good agreement with calculations of the $g$-factor using the heavy- and light-hole spaces of the Luttinger Hamiltonian, especially the first two holes, showing a strong spin-orbit coupling and suggesting dramatic $g$-factor tunability through both the $B$-field and the charge state.

cond-mat.mes-hall↗

arXiv2020

Quantitative Measurements of Giant and Quantized Microwave Faraday Rotation

We report {\it quantitative} microwave Faraday rotation measurements conducted with a high-mobility two-dimensional electron gas (2DEG) in a GaAs/AlGaAs semiconductor heterostructure. In a magnetic field, the Hall effect and the Faraday effect arise from the action of Lorentz force on electrons in the 2DEG. As with the Hall effect, a classical Faraday effect is observed at low magnetic field as well as a quantized Faraday effect at high magnetic field. The high electron mobility of the 2DEG enables a giant single-pass Faraday rotation of $θ_F^{max} \simeq 45^\circ$ $(\simeq0.8$~rad) to be achieved at a modest magnetic field of $B \simeq 100$~mT. In the quantum regime, we find that the Faraday rotation $θ_F$ is quantized in units of $α^*= 2.80(4)α$, where $α\simeq 1/137$ is the fine structure constant. The enhancement in rotation quantum $α^* > α$ is attributed to electromagnetic confinement within a waveguide structure.

cond-mat.mes-hall↗

arXiv2019

Spin-orbit Interactions for Singlet-Triplet Qubits in Silicon

Spin-orbit coupling is relatively weak for electrons in bulk silicon, but enhanced interactions are reported in nanostructures such as the quantum dots used for spin qubits. These interactions have been attributed to various dissimilar interface effects, including disorder or broken crystal symmetries. In this Letter, we use a double-quantum-dot qubit to probe these interactions by comparing the spins of separated singlet-triplet electron pairs. We observe both intravalley and intervalley mechanisms, each dominant for [110] and [100] magnetic field orientations, respectively, that are consistent with a broken crystal symmetry model. We also observe a third spin-flip mechanism caused by tunneling between the quantum dots. This improved understanding is important for qubit uniformity, spin control and decoherence, and two-qubit gates.

cond-mat.mes-hall↗

arXiv2018

All-electrical universal control of a double quantum dot qubit in silicon MOS

Qubits based on transistor-like Si MOS nanodevices are promising for quantum computing. In this work, we demonstrate a double quantum dot spin qubit that is all-electrically controlled without the need for any external components, like micromagnets, that could complicate integration. Universal control of the qubit is achieved through spin-orbit-like and exchange interactions. Using single shot readout, we show both DC- and AC-control techniques. The fabrication technology used is completely compatible with CMOS.

cond-mat.mes-hall↗

arXiv2018

High-fidelity single-shot readout for a spin qubit via an enhanced latching mechanism

The readout of semiconductor spin qubits based on spin blockade is fast but suffers from a small charge signal. Previous work suggested large benefits from additional charge mapping processes, however uncertainties remain about the underlying mechanisms and achievable fidelity. In this work, we study the single-shot fidelity and limiting mechanisms for two variations of an enhanced latching readout. We achieve average single-shot readout fidelities > 99.3% and > 99.86% for the conventional and enhanced readout respectively, the latter being the highest to date for spin blockade. The signal amplitude is enhanced to a full one-electron signal while preserving the readout speed. Furthermore, layout constraints are relaxed because the charge sensor signal is no longer dependent on being aligned with the conventional (2, 0) - (1, 1) charge dipole. Silicon donor-quantum-dot qubits are used for this study, for which the dipole insensitivity substantially relaxes donor placement requirements. One of the readout variations also benefits from a parametric lifetime enhancement by replacing the spin-relaxation process with a charge-metastable one. This provides opportunities to further increase the fidelity. The relaxation mechanisms in the different regimes are investigated. This work demonstrates a readout that is fast, has one-electron signal and results in higher fidelity. It further predicts that going beyond 99.9% fidelity in a few microseconds of measurement time is within reach.

cond-mat.mes-hall↗

arXiv2017

Coherent coupling between a quantum dot and a donor in silicon

Individual donors in silicon chips are used as quantum bits with extremely low error rates. However, physical realizations have been limited to one donor because their atomic size causes fabrication challenges. Quantum dot qubits, in contrast, are highly adjustable using electrical gate voltages. This adjustability could be leveraged to deterministically couple donors to quantum dots in arrays of qubits. In this work, we demonstrate the coherent interaction of a $^{31}$P donor electron with the electron of a metal-oxide-semiconductor quantum dot. We form a logical qubit encoded in the spin singlet and triplet states of the two-electron system. We show that the donor nuclear spin drives coherent rotations between the electronic qubit states through the contact hyperfine interaction. This provides every key element for compact two-electron spin qubits requiring only a single dot and no additional magnetic field gradients, as well as a means to interact with the nuclear spin qubit.

cond-mat.mes-hall↗

arXiv2014

QCAD Simulation and Optimization of Semiconductor Quantum Dots

We present the Quantum Computer Aided Design (QCAD) simulator that targets modeling multi-dimensional quantum devices, particularly silicon multi-quantum dots (QDs) developed for quantum bits (qubits). This finite-element simulator has three differentiating features: (i) its core contains nonlinear Poisson, effective mass Schrodinger, and Configuration Interaction solvers that have massively parallel capability for high simulation throughput, and can be run individually or combined self-consistently for 1D/2D/3D quantum devices; (ii) the core solvers show superior convergence even at near-zero-Kelvin temperatures, which is critical for modeling quantum computing devices; and (iii) it interfaces directly with the full-featured optimization engine Dakota. In this work, we describe the capabilities and implementation of the QCAD simulation tool, and show how it can be used to both analyze existing experimental QD devices through capacitance calculations, and aid in the design of few-electron multi-QDs. In particular, we observe that computed capacitances are in rough agreement with experiment, and that quantum confinement increases capacitance when the number of electrons is fixed in a quantum dot. Coupling of QCAD with the optimizer Dakota allows for rapid identification and improvement of device layouts that are likely to exhibit few-electron quantum dot characteristics.

cond-mat.mes-hall↗

arXiv2014

Efficient self-consistent quantum transport simulator for quantum devices

We present a self-consistent one-dimensional (1D) quantum transport simulator based on the Contact Block Reduction (CBR) method, aiming for very fast and robust transport simulation of 1D quantum devices. Applying the general CBR approach to 1D open systems results in a set of very simple equations that are derived and given in detail for the first time. The charge self-consistency of the coupled CBR-Poisson equations is achieved by using the predictor-corrector iteration scheme with the optional Anderson acceleration. In addition, we introduce a new way to convert an equilibrium electrostatic barrier potential calculated from an external simulator to an effective doping profile, which is then used by the CBR-Poisson code for transport simulation of the barrier under non-zero biases. The code has been applied to simulate the quantum transport in a double barrier structure and across a tunnel barrier in a silicon double quantum dot. Extremely fast self-consistent 1D simulations of the differential conductance across a tunnel barrier in the quantum dot show better qualitative agreement with experiment than non-self-consistent simulations.

cond-mat.mes-hall↗

arXiv2014

Spontaneous emission in a silicon charge qubit

The interaction between a qubit and its environment provides a channel for energy relaxation which has an energy-dependent timescale governed by the specific coupling mechanism. We measure the rate of inelastic decay in a Si MOS double quantum dot (DQD) charge qubit through sensing the charge state's response to non-adiabatic driving of its excited state population. The charge distribution is sensed remotely in the weak measurement regime. We extract emission rates down to kHz frequencies by measuring the variation of the non-equilibrium charge occupancy as a function of amplitude and dwell times between non-adiabatic pulses. Our measurement of the energy-dependent relaxation rate provides a fingerprint of the relaxation mechanism, indicating that relaxation rates for this Si MOS DQD are consistent with coupling to deformation acoustic phonons.

quant-ph↗