arXiv subjects

Milos Toth

Publications and source records attributed to Milos Toth.

At least 91 records · Page 5Linked to original sources

arXiv2017

Photophysics of GaN single photon sources in the visible spectral range

In this work, we present a detailed photophysical analysis of recently-discovered optically stable, single photon emitters (SPEs) in Gallium Nitride (GaN). Temperature-resolved photoluminescence measurements reveal that the emission lines at 4 K are three orders of magnitude broader than the transform-limited widths expected from excited state lifetime measurements. The broadening is ascribed to ultra-fast spectral diffusion. Continuing the photophysics study on several emitters at room temperature (RT), a maximum average brightness of ~427 kCounts/s is measured. Furthermore, by determining the decay rates of emitters undergoing three-level optical transitions, radiative and non-radiative lifetimes are calculated at RT. Finally, polarization measurements from 14 emitters are used to determine visibility as well as dipole orientation of defect systems within the GaN crystal. Our results underpin some of the fundamental properties of SPE in GaN both at cryogenic and RT, and define the benchmark for future work in GaN-based single-photon technologies.

quant-ph↗

arXiv2017

Resonant Excitation of Quantum Emitters in Hexagonal Boron Nitride

Quantum emitters in layered hexagonal boron nitride (hBN) have recently attracted a great attention as promising single photon sources. In this work, we demonstrate resonant excitation of a single defect center in hBN, one of the most important prerequisites for employment of optical sources in quantum information application. We observe spectral linewidths of hBN emitter narrower than 1 GHz while the emitter experiences spectral diffusion. Temporal photoluminescence measurements reveals an average spectral diffusion time of around 100 ms. On-resonance photon antibunching measurement is also realized. Our results shed light on the potential use of quantum emitters from hBN in nanophotonics and quantum information.

cond-mat.mtrl-sci↗

arXiv2017

First principles investigation of quantum emission from hBN defects

Hexagonal boron nitride (hBN) has recently emerged as a fascinating platform for room-temperature quantum photonics due to the discovery of robust visible light single-photon emitters. In order to utilize these emitters, it is necessary to have a clear understanding of their atomic structure and the associated excitation processes that give rise to this single photon emission. Here we perform density-functional theory (DFT) and constrained DFT calculations for a range of hBN point defects in order to identify potential emission candidates. By applying a number of criteria on the electronic structure of the ground state and the atomic structure of the excited states of the considered defects, and then calculating the Huang-Rhys (HR) factor, we find that the CBVN defect, in which a carbon atom substitutes a boron atom and the opposite nitrogen atom is removed, is a potential emission source with a HR factor of 1.66, in good agreement with the experimental HR factor. We calculate the photoluminescence (PL) line shape for this defect and find that it reproduces a number of key features in the the experimental PL lineshape.

cond-mat.mtrl-sci↗

arXiv2017

Network patterns in exponentially growing 2D biofilms

Anisotropic collective patterns occur frequently in the morphogenesis of 2D biofilms. These patterns are often attributed to growth regulation mechanisms and differentiation based on gradients of diffusing nutrients and signalling molecules. Here, we employ a model of bacterial growth dynamics to show that even in the absence of growth regulation or differentiation, confinement by an enclosing medium such as agar can itself lead to stable pattern formation over time scales that are employed in experiments. The underlying mechanism relies on path formation through physical deformation of the enclosing environment.

physics.bio-ph↗

arXiv2017

Atomic Engineering of Single Photon Sources in 2D Boron Nitride Zai-Quan

Artificial atomic systems in solids such as single photon emitters are becoming increasingly important building blocks in quantum information processing and scalable quantum nanophotonic networks. Here, we report on a controllable way to engineer emitters in two-dimensional (2D) hexagonal boron nitride (hBN) crystals using plasma processing. The method is robust, and yields a 7-fold increase in the density of emitters in hBN, which is promising for their deployment in practical devices. While as-fabricated emitters suffer from blinking and bleaching, a subsequent annealing step yields photo-stable emitters. The presented process is the first step towards controllable placement of quantum emitters in hBN for integrated on-chip quantum nanophotonics based on 2D materials.

cond-mat.mtrl-sci↗

arXiv2016

Room temperature single photon emission from oxidized tungsten disulphide multilayers

Two dimensional systems offer a unique platform to study light matter interaction at the nanoscale. In this work we report on robust quantum emitters fabricated by thermal oxidation of tungsten disulphide multilayers. The emitters show robust, optically stable, linearly polarized luminescence at room temperature, can be modeled using a three level system, and exhibit moderate bunching. Overall, our results provide important insights into understanding of defect formation and quantum emitter activation in 2D materials.

cond-mat.mes-hall↗

arXiv2016

Emergent pattern formation in an interstitial biofilm

Collective behavior of bacterial colonies plays critical roles in adaptability, survivability, biofilm expansion and infection. We employ an individual-based model of an interstitial biofilm to study emergent pattern formation based on the assumptions that rod-shaped bacteria furrow through a viscous environment, and excrete extracellular polymeric substances which bias their rate of motion. Because the bacteria furrow through their environment, the substratum stiffness is a key control parameter behind the formation of distinct morphological patterns. By systematically varying this property (which we quantify with a stiffness coefficient γ), we show that subtle changes in the substratum stiffness can give rise to a stable state characterized by a high degree of local order and long-range pattern formation. The ordered state exhibits characteristics typically associated with bacterial fitness advantages, even though it is induced by changes in environmental conditions rather than changes in biological parameters. Our findings are applicable to broad range of biofilms and provide insights into the relationship between bacterial movement and their environment, and basic mechanisms behind self-organization of biophysical systems.

nlin.AO↗

arXiv2016

Robust Solid State Quantum System Operating at 800 K

Realization of Quantum information and communications technologies requires robust, stable solid state single photon sources. However, most existing sources cease to function above cryogenic or room temperature due to thermal ionization or strong phonon coupling which impede their emissive and quantum properties. Here we present an efficient single photon source based on a defect in a van der Waals crystal that is optically stable and operates at elevated temperatures of up to 800 K. The quantum nature of the source and the photon purity are maintained upon heating to 800 K and cooling back to room temperature. Our report of a robust high temperature solid state single photon source constitutes a significant step to-wards practical, integrated quantum technologies for real-world environments.

quant-ph↗

arXiv2016

Bright Room-Temperature Single Photon Emission from Defects in Gallium Nitride

Single photon emitters play a central role in many photonic quantum technologies. A promising class of single photon emitters consists of atomic color centers in wide-bandgap crystals, such as diamond silicon carbide and hexagonal boron nitride. However, it is currently not possible to grow these materials as sub-micron thick films on low-refractive index substrates, which is necessary for mature photonic integrated circuit technologies. Hence, there is great interest in identifying quantum emitters in technologically mature semiconductors that are compatible with suitable heteroepitaxies. Here, we demonstrate robust single photon emitters based on defects in gallium nitride (GaN), the most established and well understood semiconductor that can emit light over the entire visible spectrum. We show that the emitters have excellent photophysical properties including a brightness in excess of 500x10^3 counts/s. We further show that the emitters can be found in a variety of GaN wafers, thus offering reliable and scalable platform for further technological development. We propose a theoretical model to explain the origin of these emitters based on cubic inclusions in hexagonal gallium nitride. Our results constitute a feasible path to scalable, integrated on-chip quantum technologies based on GaN.

cond-mat.mtrl-sci↗

arXiv2016

Engineering and localization of quantum emitters in large hexagonal boron nitride layers

Hexagonal boron nitride (hBN) is a wide bandgap van der Waals material that has recently emerged as promising platform for quantum photonics experiments. In this work we study the formation and localization of narrowband quantum emitters in large flakes (up to tens of microns wide) of hBN. The emitters can be activated in as-grown hBN by electron irradiation or high temperature annealing, and the emitter formation probability can be increased by ion implantation or focused laser irradiation of the as-grown material. Interestingly, we show that the emitters are always localized at edges of the flakes, unlike most luminescent point defects in 3D materials. Our results constitute an important step on the road map of deploying hBN in nanophotonics applications.

cond-mat.mtrl-sci↗

arXiv2016

Robust, directed assembly of fluorescent nanodiamonds

Arrays of fluorescent nanoparticles are highly sought after for applications in sensing and nanophotonics. Here we present a simple and robust method of assembling fluorescent nanodiamonds into macroscopic arrays. Remarkably, the yield of this directed assembly process is greater than 90% and the assembled patterns withstand ultra-sonication for more than three hours. The assembly process is based on covalent bonding of carboxyl to amine functional carbon seeds and is applicable to any material, and to non-planar surfaces. Our results pave the way to directed assembly of sensing and nanophotonics devices.

physics.optics↗

arXiv2016

Robust multicolor single photon emission from point defects in hexagonal boron nitride

Hexagonal boron nitride (hBN) is an emerging two dimensional material for quantum photonics owing to its large bandgap and hyperbolic properties. Here we report a broad range of multicolor room temperature single photon emissions across the visible and the near infrared spectral ranges from point defects in hBN multilayers. We show that the emitters can be categorized into two general groups, but most likely possess similar crystallographic structure. We further show two approaches for engineering of the emitters using either electron beam irradiation or annealing, and characterize their photophysical properties. The emitters exhibit narrow line widths of sub 10 nm at room temperature, and a short excited state lifetime with high brightness. Remarkably, the emitters are extremely robust and withstand aggressive annealing treatments in oxidizing and reducing environments. Our results constitute the first step towards deterministic engineering of single emitters in 2D materials and hold great promise for the use of defects in boron nitride as sources for quantum information processing and nanophotonics.

cond-mat.mtrl-sci↗

arXiv2016

Quantum Emission from Defects in Single Crystal Hexagonal Boron Nitride

Bulk hexagonal boron nitride (hBN) is a highly nonlinear natural hyperbolic material that attracts major attention in modern nanophotonics applications. However, studies of its optical properties in the visible part of the spectrum and quantum emitters hosted by bulk hBN have not been reported to date. In this work we study the emission properties of hBN crystals in the red spectral range using sub-bandgap optical excitation. Quantum emission from defects is observed at room temperature and characterized in detail. Our results advance the use of hBN in quantum nanophotonics technologies and enhance our fundamental understanding of its optical properties.

cond-mat.mtrl-sci↗

arXiv2016

Localization of narrowband single photon emitters in nanodiamonds

Diamond nanocrystals that host room temperature narrowband single photon emitters are highly sought after for applications in nanophotonics and bio-imaging. However, current understanding of the origin of these emitters is extremely limited. In this work we demonstrate that the narrowband emitters are point defects localized at extended morphological defects in individual nanodiamonds. In particular, we show that nanocrystals with defects such as twin boundaries and secondary nucleation sites exhibit narrowband emission that is absent from pristine individual nanocrystals grown under the same conditions. Critically, we prove that the narrowband emission lines vanish when extended defects are removed deterministically using highly localized electron beam induced etching. Our results enhance the current understanding of single photon emitters in diamond, and are directly relevant to fabrication of novel quantum optics devices and sensors.

physics.optics↗

arXiv2015

Emergent formation of dynamic topographic patterns in electron beam induced etching

Spontaneous formation of geometric patterns is a fascinating, ubiquitous process that provides fundamental insights into the roles of symmetry breaking, anisotropy and nonlinear interactions in emergent phenomena. Here we report dynamic, highly ordered topographic patterns on the surface of diamond that span multiple length scales and have a symmetry controlled by the chemical species of a precursor gas used in electron beam induced etching (EBIE). This behavior reveals an underlying etch rate anisotropy and an electron energy transfer pathway that has been overlooked by existing EBIE theory. We present an etch rate kinetics model that fully explains our results and is universally applicable to EBIE. Our findings can be exploited for controlled wetting, optical structuring and other emerging applications that require nano and micro-scale surface texturing.

cond-mat.mtrl-sci↗

arXiv2015

Facile Self-Assembly of Quantum Plasmonic Circuit Components

Efficient coupling between solid state quantum emitters and plasmonic waveguides is important for the realization of integrated circuits for quantum information, communication and sensing. However, realization of plasmonic circuits is still scarce, particularly due to challenges associated with accurate positioning of quantum emitters near plasmonic resonators. Current pathways for the construction of plasmonic circuits involve cumbersome and costly methods such as scanning atomic force microscopy or mechanical manipulation, where individual elements are physically relocated using the scanning tip. Here, we introduce a simple, fast and cost effective chemical self-assembly method for the attachment of two primary components of a practical plasmonic circuit: a single photon emitter and a waveguide. Our method enables coupling of nanodiamonds with a single quantum emitter (the nitrogen-vacancy (NV) center) onto the terminal of a silver nanowire, by simply varying the concentration of ascorbic acid (AA) in a reaction solution. The AA concentration is used to control the extent of agglomeration, and can be optimised so as to cause preferential, selective activation of the tips of the nanowires. The nanowire-nanodiamond structures show efficient plasmonic coupling of fluorescence emission from single NV centers into surface plasmon polariton (SPP) modes, evidenced by a more than two-fold reduction in fluorescence lifetime and an increase in fluorescence intensity.

cond-mat.mtrl-sci↗

arXiv2015

Quantum Emission From Hexagonal Boron Nitride Monolayers

Atomically thin van der Waals crystals have recently enabled new scientific and technological breakthroughs across a variety of disciplines in materials science, nanophotonics and physics. However, non-classical photon emission from these materials has not been achieved to date. Here we report room temperature quantum emission from hexagonal boron nitride nanoflakes. The single photon emitter exhibits a combination of superb quantum optical properties at room temperature that include the highest brightness reported in the visible part of the spectrum, narrow line width, absolute photo-stability, a short excited state lifetime and a high quantum efficiency. Density functional theory modeling suggests that the emitter is the antisite nitrogen vacancy defect that is present in single and multi-layer hexagonal boron nitride. Our results constitute the unprecedented potential of van der Waals crystals for nanophotonics, optoelectronics and quantum information processing.

cond-mat.mtrl-sci↗

arXiv2015

Direct-write milling of diamond by a focused oxygen ion beam

Recent advances in focused ion beam technology have enabled high-resolution, direct-write nanofabrication using light ions. Studies with light ions to date have, however, focused on milling of materials where sub-surface ion beam damage does not inhibit device performance. Here we report on direct-write milling of single crystal diamond using a focused beam of oxygen ions. Material quality is assessed by Raman and luminescence analysis, and reveals that the damage layer generated by oxygen ions can be removed by nonintrusive post-processing methods such as localised electron beam induced chemical etching.

cond-mat.mtrl-sci↗