arXiv subjects

Muhammad Zubair

Publications and source records attributed to Muhammad Zubair.

At least 19 recordsLinked to original sources

arXiv2026

Closed-form Model for Radiation Pattern of Pinching Antennas

In this article, we develop an analytical radiation-pattern model for pinching-antenna systems (PASS) based on a two-dimensional dielectric slab waveguide. The model is derived in two steps. First, we employ coupled-mode theory (CMT) to derive a closed-form expression for the field coupled into the pinching antennas (PAs). Second, we use this analytical field profile as a scattering source model and derive the far-field radiation pattern via a two-dimensional radiation integral. We validate the proposed model against full-wave finite-element simulations performed in COMSOL Multiphysics, showing that it accurately reproduces the directional radiation characteristics of PASS. In contrast, most existing works model PAs as omni-directional point radiators, which simplifies system-level analysis but does not accurately capture the underlying electromagnetic radiation mechanism. Because the proposed model is given in closed form, it can be easily integrated into existing system-level PASS models to replace the assumed omni-directional pattern with a physically motivated directional radiation pattern. Finally, numerical simulations quantify the performance degradation that arises when the directional behavior of PAs is neglected in a representative wireless communications scenario.

eess.SP↗

arXiv2026

Effects of uniaxial strain on monolayer transition-metal dichalcogenides revisited

Using hybrid density functional calculations including spin-orbit coupling, we compute the strain evolution of the band structure of monolayer 1H-phase transition-metal dichalcogenides, MX$_2$ (M= Mo, W; X= S, Se, Te), emphasizing an accurate reproduction of the quasiparticle band gap (as opposed to the excitonic optical gap). We show that tensile uniaxial strain applied along either the armchair or zigzag directions leads to a pronounced reduction of the fundamental gap, with the conduction-band edge generally exhibiting the stronger strain response. Both the conduction-band electron valleys (CBM) and the valence-band hole valleys (VBM) remain degenerate under uniaxial strain, while simultaneously drifting away from the high-symmetry $K$ point under strain ("valley drift"), such that the band extrema occur at nearby off-symmetry wave vectors. A minimal tight-binding model rationalizes the valley drift and the unequal electron- and hole-valley drift rates in the presence of strain, leading to indirect band gaps. In particular, for MoS$_2$ the indirectness increases with tensile strain, providing a natural explanation for the experimentally observed decrease in photoluminescence intensity under uniaxial deformation. These results provide quantitative guidance for tailoring band structures for optoelectronic and quantum-defect applications.

cond-mat.mtrl-sci↗

arXiv2025

A Comprehensive Review of Techniques, Algorithms, Advancements, Challenges, and Clinical Applications of Multi-modal Medical Image Fusion for Improved Diagnosis

Multi-modal medical image fusion (MMIF) is increasingly recognized as an essential technique for enhancing diagnostic precision and facilitating effective clinical decision-making within computer-aided diagnosis systems. MMIF combines data from X-ray, MRI, CT, PET, SPECT, and ultrasound to create detailed, clinically useful images of patient anatomy and pathology. These integrated representations significantly advance diagnostic accuracy, lesion detection, and segmentation. This comprehensive review meticulously surveys the evolution, methodologies, algorithms, current advancements, and clinical applications of MMIF. We present a critical comparative analysis of traditional fusion approaches, including pixel-, feature-, and decision-level methods, and delves into recent advancements driven by deep learning, generative models, and transformer-based architectures. A critical comparative analysis is presented between these conventional methods and contemporary techniques, highlighting differences in robustness, computational efficiency, and interpretability. The article addresses extensive clinical applications across oncology, neurology, and cardiology, demonstrating MMIF's vital role in precision medicine through improved patient-specific therapeutic outcomes. Moreover, the review thoroughly investigates the persistent challenges affecting MMIF's broad adoption, including issues related to data privacy, heterogeneity, computational complexity, interpretability of AI-driven algorithms, and integration within clinical workflows. It also identifies significant future research avenues, such as the integration of explainable AI, adoption of privacy-preserving federated learning frameworks, development of real-time fusion systems, and standardization efforts for regulatory compliance.

eess.IV↗

arXiv2025

Weyl semimetal phases and intrinsic spin-Hall conductivity in SbAs ordered alloys

Using density functional theory calculations we investigated possible Weyl semimetal (WSM) phases in antimony arsenide ordered alloys Sb1-xAsx (x=0, 1/6, 1/3, 1/2, 2/3, 5/6, 1). We find WSM phases for all As compositions of Sb1-xAsx with broken inversion symmetry, in contrast to Bi1-xSbx where only compositions x=1/2 and 5/6 were predicted to exhibit WSM phases. The WSM phases in Sb1-xAsx are characterized by the presence of 12 Weyl points, located within 55 meV from the Fermi level in the case of x=1/2. The robust spin-orbit coupling strength and Berry curvature in these alloys produce large spin-Hall conductivity in the range of 176-602 (hbar/e)(S/cm), comparable to that in the BiSb alloys. Finally, Sb0.5As0.5 is predicted to be almost lattice-matched to GaAs(111), with the Fermi level within the gap of the semiconductor, facilitating growth and characterization, and thus, offering promising integration with conventional semiconductors.

cond-mat.mtrl-sci↗

arXiv2024

Second Harmonic Generation in Topological Insulators under Quantizing Magnetic Fields

We theoretically investigate the second harmonic generation (SHG) of topological insulator surface states in a perpendicular magnetic field. Our theory is based on the microscopic expression of the second-order magneto-optical conductivity developed from the density matrix formalism, taking into account hexagonal warping effects on the surface states' band structure. Using numerically exact Landau level energies and wavefunctions including hexagonal warping, we calculate the spectrum of SHG conductivities under normal incidence for different values of magnetic field and chemical potential. The imaginary parts of the SHG conductivities show prominent resonant peaks corresponding to one-photon and two-photon inter-Landau level transitions. Treating the hexagonal warping term perturbatively, these transitions are clarified analytically within a perturbation theory from which approximate selection rules for the allowable optical transitions for SHG are determined. Our results show extremely high SHG susceptibility that is easily tunable by magnetic field and doping level for topological surface states in the far-infrared regime, exceeding that of many conventional nonlinear materials. This work highlights the key role of hexagonal warping effects in generating second-order optical responses and provides new insights on the nonlinear magneto-optical properties of the topological insulators.

cond-mat.mes-hall↗

arXiv2023

Shadow of novel rotating black holes in GR coupled to nonlinear electrodynamics and constraints from EHT results

We study the optical properties of spacetime around a novel regular black hole (BH) in general relativity (GR) coupled to nonlinear electrodynamics (NED), which is asymptotically flat. First, we study the angular velocity and Lyapunov exponent in unstable photon circular orbits in the novel spherically symmetric BH spacetime. Later, the rotating regular BH solution is obtained using the Newmann-Janis algorithm, and the event horizon properties of the BH are determined. We analyze the effective potential for the circular motion of photons in the spacetime of the novel rotating BH. Also, we analyze the photon sphere around the novel BH and its shadow using celestial coordinates. We obtain that an increase of the BH spin and charge as well as NED field nonlinearity parameters causes an increase in the distortion parameter of the BH shadow, while, the area of the shadow and its oblateness decrease. Moreover, we also obtain the constraint values for the BH charge and the nonlinearity parameters using Event Horizon Telescope data from shadow sizes of supermassive BHs Sgr A* and M87*. Finally, the emission rate of BH evaporation through Hawking radiation is also studied.

gr-qc↗

arXiv2023

Large Rashba splittings in bulk and monolayer of BiAs

Two-dimensional materials with Rashba split bands near the Fermi level are key to developing upcoming next-generation spintronics. They enable generating, detecting, and manipulating spin currents without an external magnetic field. Here, we propose BiAs as a novel layered semiconductor with large Rashba splitting in bulk and monolayer forms. Using first-principles calculations, we determined the lowest energy structure of BiAs and its basic electronic properties. Bulk BiAs has a layered crystal structure with two atoms in a rhombohedral primitive cell, similar to the parent Bi and As elemental phases. It is a semiconductor with a narrow and indirect band gap. The spin-orbit coupling leads to Rashba-Dresselhaus spin splitting and characteristic spin texture around the L-point in the Brillouin zone of the hexagonal conventional unit cell, with Rashba energy and Rashba coupling constant for valence (conduction) band of $E_R$= 137 meV (93 meV) and $α_R$= 6.05 eVÅ~(4.6 eVÅ). In monolayer form (i.e., composed of a BiAs bilayer), BiAs has a much larger and direct band gap at $Γ$, with a circular spin texture characteristic of a pure Rashba effect. The Rashba energy $E_R$= 18 meV and Rashba coupling constant $α_R$= 1.67 eVÅ of monolayer BiAs are quite large compared to other known 2D materials, and these values are shown to increase under tensile biaxial strain.

cond-mat.mtrl-sci↗

arXiv2023

Reconfigurable Intelligent Surfaces: Interplay of Unit-Cell- and Surface-Level Design and Performance under Quantifiable Benchmarks

The ability of reconfigurable intelligent surfaces (RIS) to produce complex radiation patterns in the far-field is determined by various factors, such as the unit-cell's size, shape, spatial arrangement, tuning mechanism, the communication and control circuitry's complexity, and the illuminating source's type (point/planewave). Research on RIS has been mainly focused on two areas: first, the optimization and design of unit-cells to achieve desired electromagnetic responses within a specific frequency band; and second, exploring the applications of RIS in various settings, including system-level performance analysis. The former does not assume any specific radiation pattern on the surface level, while the latter does not consider any particular unit-cell design. Both approaches largely ignore the complexity and power requirements of the RIS control circuitry. As we progress towards the fabrication and use of RIS in real-world settings, it is becoming increasingly necessary to consider the interplay between the unit-cell design, the required surface-level radiation patterns, the control circuit's complexity, and the power requirements concurrently. In this paper, a benchmarking framework for RIS is employed to compare performance and analyze tradeoffs between the unit-cell's specified radiation patterns and the control circuit's complexity for far-field beamforming, considering different diode-based unit-cell designs for a given surface size. This work lays the foundation for optimizing the design of the unit-cells and surface-level radiation patterns, facilitating the optimization of RIS-assisted wireless communication systems.

cs.IT↗

arXiv2023

Rate dependence of damage formation in metallic-intermetallic Mg-Al-Ca composites

We study a cast Mg-4.65Al-2.82Ca alloy with a microstructure containing $α$-Mg matrix reinforced with a C36 Laves phase skeleton. Such ternary alloys are targeted for elevated temperature applications in automotive engines since they possess excellent creep properties. However, in application, the alloy may be subjected to a wide range of strain rates and in material development, accelerated testing is often of essence. It is therefore crucial to understand the effect of such rate variations. Here, we focus on their impact on damage formation. Due to the locally highly variable skeleton forming the reinforcement in this alloy, we employ an analysis based on high resolution panoramic imaging by scanning electron microscopy coupled with automated damage analysis by deep learning-based object detection and classification convolutional neural network algorithm (YOLOV5). We find that with decreasing strain rate the dominant damage mechanism for a given strain level changes: at a strain rate of $5\cdot10^{-4}/s$ the evolution of microcracks in the C36 Laves phase governs damage formation. However , when the strain rate is decreased to $5\cdot10^{-6}/s$, interface decohesion at the $α$-Mg/Laves phase interfaces becomes equally important. We also observe a change in crack orientation indicating an increasing influence of plastic co-deformation of the α-Mg matrix and Laves phase. We attribute this transition in leading damage mechanism to thermally activated processes at the interface.

cond-mat.mtrl-sci↗

arXiv2023

Inversion Symmetry Breaking in Epitaxial Ultrathin Bi (111) Films

Bismuth (Bi) films hold potential for spintronic devices and topological one-dimensional edge transport. Large-area high-quality (111) Bi ultrathin films are grown on InSb (111)B substrates. Strong film-substrate interactions epitaxially stabilize the (111) orientation and lead to inversion symmetry breaking. We resolve the longstanding controversy over the Z_2 topological assignment of bismuth and show that the surface states are topologically trivial. Our results demonstrate that interfacial bonds prevent the semimetal-to-semiconductor transition predicted for freestanding bismuth layers, highlighting the importance of controlled functionalization and surface passivation in two-dimensional materials.

cond-mat.mtrl-sci↗

arXiv2021

Generalized Fully Coherent Closed-form Receiver Design for Joint Radar and Communication System

In conventional radar, the transmission of the same waveform is repeated after a predefined interval of time called pulse-repetition-interval (PRI). This technique helps to estimate the range and Doppler shift of targets and suppress clutter. In dual-function radar communication (DFRC), different waveforms are transmitted after each PRI. Thus, each waveform yields different range-side-lobe (RSL) levels at the receiver's output. As a consequence, Doppler shift estimation and clutter suppression become challenging tasks. A state-of-the-art (SOTA) method claims that if the number of waveforms is more than two, it is impossible to achieve fully coherent RSL levels with both waveforms. Therefore, this algorithm uses iterative methods to achieve as much as possible coherency and minimize the RSL levels. In contrast to that SOTA method, we proposed two novel closed-form receivers for the DFRC that yield a fully coherent response for several waveforms and suppress the RSL levels. Experimental results demonstrate that the proposed receivers achieve full coherency and the RSL levels are significantly lower than the conventional method.

eess.SP↗

arXiv2021

Plastic deformation of the CaMg$_{2}$ C14-Laves phase from 50-250$^\circ$C

Intermetallic phases can significantly improve the creep resistance of magnesium alloys, extending their use to higher temperatures. However, little is known about the deformation behaviour of these phases at application temperatures, which are commonly below their macroscopic brittle-to-ductile-transition temperature. In this study, we therefore investigate the activation of different slip systems of the CaMg$_2$ phase and the occurrence of serrated yielding in the temperature range from 50$^\circ$C to 250$^\circ$C. A decreasing amount of serrated flow with increasing temperature suggests that solute atoms govern the flow behaviour when the CaMg$_{2}$ phase is off-stoichiometric.

cond-mat.mtrl-sci↗

arXiv2021

Unraveling the vector nature of generalized space-fractional Bessel beams

We introduce an exact analytical solution of the homogeneous space-fractional Helmholtz equation in cylindrical coordinates. This solution, called vector Space-Fractional Bessel Beam (SFBB), has been established from the Lorenz' gauge condition and Hertz vector transformations. We perform scalar and vector wave analysis focusing on electromagnetics applications, especially in cases where the dimensions of the beam are comparable to its wavelength $(k_r \approx k)$. The propagation characteristics such as the diffraction and self-healing properties have been explored with particular emphasis on the polarization states and transverse propagation modes. Due to continuous order orbital angular momentum dependence, this beam can serve as a bridge between the ordinary integer Bessel beam and the fractional Bessel beam and, thus, can be considered as a generalized solution of the space-fractional wave equation that is applicable in both integer and fractional dimensional spaces. The proposed SFBBs provide better control over the beam characteristics and can be readily generated using Digital Micromirror Devices (DMDs), Spatial Light Modulators (SLMs), metasurfaces, or spiral phase plates. Our findings offer new insights on electromagnetic wave propagation, thus paving a new route towards novel applications in optical tweezers, refractive index sensing, optical trapping, and optical communications.

physics.optics↗

arXiv2021

Exploring the transfer of plasticity across Laves phase interfaces in a dual phase magnesium alloy

The mechanical behaviour of Mg-Al alloys can be largely improved by the formation of an intermetallic Laves phase skeleton, in particular the creep strength. Recent nanomechanical studies revealed plasticity by dislocation glide in the (Mg,Al)$_2$Ca Laves phase, even at room temperature. As strengthening skeleton, this phase remains, however, brittle at low temperature. In this work, we present experimental evidence of slip transfer from the Mg matrix to the (Mg,Al)$_2$Ca skeleton at room temperature and explore associated mechanisms by means of atomistic simulations. We identify two possible mechanisms for transferring Mg basal slip into Laves phases depending on the crystallographic orientation: a direct and an indirect slip transfer triggered by full and partial dislocations, respectively. Our experimental and numerical observations also highlight the importance of interfacial sliding that can prevent the transfer of the plasticity from one phase to the other.

cond-mat.mtrl-sci↗

arXiv2020

Long distance adiabatic wireless energy transfer via multiple coils coupling

Recently, the wireless energy transfer model can be described as the Schrodinger equation [Annals of Physics, 2011, 326(3): 626-633; Annals of Physics, 2012, 327(9): 2245-2250]. Therefore, wireless energy transfer can be designed by coherent quantum control techniques, which can achieve efficient and robust energy transfer from transmitter to receiver device. In this paper, we propose a novel design of wireless energy transfer which obtains the longer distance, efficient and robust schematic of power transfer, via multiple states triangle crossing pattern. After our calculations, we demonstrate that our design can provide much longer transfer distance with relatively smaller decreasing in the transfer efficiency.

physics.app-ph↗

arXiv2020

SOS: Socially Omitting Selfishness in IoT for Smart and Connected Communities

Smart and Connected Communities (SCC) is an emerging field of Internet of Things (IoT), and it is having potential applications to improve human life. The improvement may be in terms of preservation, revitalization, livability, and sustainability of a community. The resources of the nodes and devices in the SCC have certain constraints that may not allow the devices and nodes to cooperate to save their resources such as memory, energy, and buffer, or simply maximize their performance. Thus, to stimulate the nodes to avoid selfish behavior, SSC needs a novel and well-organized solution to motivate nodes for cooperation. This article aims to resolve the issue of selfish behaviors in SCC and to encourage the nodes for cooperation. A novel mechanism Socially Omitting Selfishness (SOS) has been proposed to manage/eradicate selfishness using a socially-oriented election process. The election process elects different heads based on weight and cooperation (using VCG model). The election of heads and incentive mechanism encourages the nodes to show participation and behave as highly cooperative members of the community. Furthermore, an extended version of the Dempster-Shafer model has been used to discourage the selfish behavior of the participating nodes in the SOS scheme. It uses different monitoring and gateway nodes to efficiently employ the proposed scheme. A mathematical model has been developed for the aforementioned aspects and simulated through the NS2 simulation environment to analyze the performance of SOS. The results of the proposed scheme outperform the contemporary schemes in terms of average delivery delay, packet delivery ratio, throughput, and average energy.

cs.DC↗

arXiv2020

Honesty Based Democratic Scheme to Improve Community Cooperation for IoT Based Vehicular Delay Tolerant Networks

Many Internet of things (IoT) applications have been developed and implemented on unreliable wireless networks like the Delay tolerant network (DTN), however, efficient data transfer in DTN is still an important issue for the IoT applications. One of the application areas of DTN is Vehicular Delay Tolerant Network (VDTN) where the network faces communication disruption due to lack of end-to-end relay route. It is challenging as some of the nodes show selfish behavior to preserve their resources like memory, and energy level and become non-cooperative. In this article, an Honesty based Democratic Scheme (HBDS) is introduced where vehicles with higher honesty level are elected as heads -- during the process. Vehicles involved in the process would maximize their rewards (reputation) through active participation in the network activities whereas nodes with non-cooperative selfish behavior are punished. The honesty level of the heads is analyzed using Vickrey, Clarke, and Groves (VCG) model. The mathematical model and algorithms developed in the proposed HBDS technique are simulated using the VDTNSim framework to evaluate their efficiency. The performance results show that the proposed scheme dominates current schemes in terms of packet delivery probability, packet delivery delay, number of packets drop, and overhead ratio.

cs.DC↗

arXiv2019

Frequency Diverse Array Radar: New Results and Discrete Fourier Transform Based Beampattern

In the phased-array radar (PAR) signals from each antenna are transmitted at the same carrier frequency, which yields narrowly focused only angle dependent beampattern. In contrast, in the frequency-diverse-array (FDA) radar signals from antenna array are generally transmitted at linearly increasing frequencies that yields range, time, and angle dependent beampattern. Reported literature on FDA radar missed the contribution of path-differences in the signal model due to the antenna array elements, which may lead to misleading results. In this work, incorporating missed path-differences, the signal model of FDA radar is corrected. Using the corrected signal model, it is shown that the instantaneous beampattern depends on the number of transmit antenna and average beampattern depends on the product of frequency-offset and pulse-duration. Moreover, to illuminate the desired region-of-interest for longer dwell time, discrete-Fourier-transform based low-complexity algorithm is proposed. In contrast to the conventional FDA radar's 'S' shaped beampattern, the beampattern of the proposed algorithm changes linearly with range. Simulation results compare the performance of our proposed algorithm with the existing ones and show the superiority of our proposed algorithm.

eess.SP↗