arXiv subjects

Myung-Geun Han

Publications and source records attributed to Myung-Geun Han.

At least 37 records · Page 2Linked to original sources

arXiv2022

Polaronic Conductivity in Cr$_2$Ge$_2$Te$_6$ Single Crystals

Intrinsic, two-dimensional (2D) ferromagnetic semiconductors are an important class of materials for spin-charge conversion applications. Cr$_2$Ge$_2$Te$_6$ retains long-range magnetic order in bilayer at cryogenic temperatures and shows complex magnetic interactions with considerable magnetic anisotropy. Here, we performed a series of structural, magnetic, X-ray scattering, electronic, thermal transport and first-principles calculation studies which reveal that localized electronic charge carriers in Cr$_2$Ge$_2$Te$_6$ are dressed by surrounding lattice and are involved in polaronic transport via hopping that is sensitive on details of magnetocrystalline anisotropy. This opens possibility for manipulation of charge transport in Cr$_2$Ge$_2$Te$_6$ - based devices by electron-phonon- and spin-orbit coupling-based tailoring of polaron properties.

cond-mat.mtrl-sci↗

arXiv2021

Hybrid symmetry epitaxy of superconducting Fe(Te,Se) film on a topological insulator

It is challenging to grow an epitaxial four-fold compound superconductor (SC) on six-fold topological insulator (TI) platform due to stringent lattice-matching requirement. Here, we demonstrate that Fe(Te,Se) can grow epitaxially on a TI (Bi2Te3) layer due to accidental, uniaxial lattice match, which is dubbed as "hybrid symmetry epitaxy". This new growth mode is critical to stabilizing robust superconductivity with TC as high as 13 K. Furthermore, the superconductivity in this FeTe1-xSex/Bi2Te3 system survives in Te-rich phase with Se content as low as x = 0.03 but vanishes at Se content above x = 0.56, exhibiting a phase diagram that is quite different from that of the conventional Fe(Te,Se) systems. This unique heterostructure platform that can be formed in both TI-on-SC and SC-on-TI sequences opens a route to unprecedented topological heterostructures.

cond-mat.supr-con↗

arXiv2021

Spacer-layer-tunable magnetism and high-field topological Hall effect in topological insulator heterostructures

Controlling magnetic order in magnetic topological insulators (MTIs) is a key to developing spintronic applications with MTIs, and is commonly achieved by changing the magnetic doping concentration, which inevitably affects spin-orbit-coupling strength and the very topological properties. Here, we demonstrate tunable magnetic properties in topological heterostructures over a wide range, from a ferromagnetic phase with Curie temperature of around 100 K all the way to a paramagnetic phase, while keeping the overall chemical composition the same, by controlling the thickness of non-magnetic spacer layers between two atomically-thin magnetic layers. This work showcases that spacer-layer control is a powerful tool to manipulate magneto-topological functionalities in MTI heterostructures. Furthermore, the interaction between the MTI and the Cr2O3 buffer layers also led to robust topological Hall effect surviving up to a record-high 6 T of magnetic field, shedding light on the critical role of interfacial layers in thin film topological materials.

cond-mat.mes-hall↗

arXiv2021

Strain-induced atomic-scale building blocks for ferromagnetism in epitaxial LaCoO3

The origin of strain-induced ferromagnetism, which is robust regardless of the type and degree of strain in LaCoO3 (LCO) thin films, is enigmatic despite intensive research efforts over the past decade. Here, by combining scanning transmission electron microscopy with ab initio density functional theory plus U calculations, we report that the ferromagnetism does not emerge directly from the strain itself, but rather from the creation of compressed structural units within ferroelastically formed twin-wall domains. The compressed structural units are magnetically active with the rocksalt-type high-spin/low-spin order. Our study highlights that the ferroelastic nature of ferromagnetic structural units is important for understanding the intriguing ferromagnetic properties in LCO thin films.

cond-mat.mtrl-sci↗

arXiv2020

Electron pairing in the pseudogap state revealed by shot noise in copper-oxide junctions

In the quest to understand high-temperature superconductivity in copper oxides, a vigorous debate has been focused on the pseudogap - a partial gap that opens over portions of the Fermi surface in the 'normal' state above the bulk critical temperature ($T_{c}$). The pseudogap has been attributed to precursor superconductivity, to the existence of preformed pairs, or to competing orders such as charge-density waves. A direct determination of the charge of carriers as a function of temperature and bias could help resolve among these alternatives. Here, we report measurements of the shot noise of tunneling current in high-quality La$_{2-x}$Sr$_{x}$CuO$_{4}$/La$_{2}$CuO$_{4}$/La$_{2-x}$Sr$_{x}$CuO$_{4}$ (LSCO/LCO/LSCO) heterostructures fabricated using atomic-layer-by-layer molecular beam epitaxy, for several doping levels. The data delineate three distinct regions in the bias voltage-temperature ($V-T$) space. Well outside the superconducting gap region, the shot noise agrees quantitatively with independent tunneling of charge-e carriers. Deep within the gap, shot noise is greatly enhanced, reminiscent of multiple Andreev reflections. Starting above $T_{c}$ and extending to biases much larger than the gap, there is a broad region in which the noise substantially exceeds the expectations of single-charge tunneling, indicating pairing of carriers. Pairs are detectable deep into the pseudogap region of temperature and bias.

cond-mat.supr-con↗

arXiv2020

Controlling ferroelectric hysteresis offsets in PbTiO$_{3}$ based superlattices

Ferroelectric materials are characterized by degenerate ground states with multiple polarization directions. In a ferroelectric capacitor this should manifest as equally favourable up and down polarization states. However, this ideal behavior is rarely observed in ferroelectric thin films and superlattice devices, which generally exhibit a built-in bias which favors one polarization state over the other. Often this polarization asymmetry can be attributed to the electrodes. In this study we examine bias in PbTiO$_3$-based ferroelectric superlattices that is not due to the electrodes, but rather to the nature of the defects that form at the interfaces during growth. Using a combination of experiments and first-principles simulations, we are able to explain the sign of the observed built-in bias and its evolution with composition. Our insights allow us to design devices with zero built-in bias by controlling the composition and periodicity of the superlattices.

cond-mat.mtrl-sci↗

arXiv2020

Room-Temperature Skyrmion Thermopower in Fe3Sn2

We present first room-temperature thermoelectric signature of the skyrmion lattice. This was observed in Fe3Sn2, a Kagome Dirac crystal with massive Dirac fermions that features high-temperature skyrmion phase. The room-temperature skyrmion lattice shows magnetic-field dependence of the wavevector whereas thermopower is dominated by the electronic diffusion mechanism, allowing for the skyrmionic bubble lattice detection. Our results pave the way for the future skyrmion-based devices based on the manipulation of the thermal gradient.

cond-mat.mtrl-sci↗

arXiv2020

Gate-Tunable Semiconductor Heterojunctions from 2D/3D van der Waals Interfaces

Van der Waals (vdW) semiconductors are attractive for highly scaled devices and heterogeneous integration since they can be isolated into self-passivated, two-dimensional (2D) layers that enable superior electrostatic control. These attributes have led to numerous demonstrations of field-effect devices ranging from transistors to triodes. By exploiting the controlled, substitutional doping schemes in covalently-bonded, three-dimensional (3D) semiconductors and the passivated surfaces of 2D semiconductors, one can construct devices that can exceed performance metrics of 'all-2D' vdW heterojunctions. Here, we demonstrate, 2D/3D semiconductor heterojunctions using MoS2 as the prototypical 2D semiconductor laid upon Si and GaN as the 3D semiconductor layers. By tuning the Fermi levels in MoS2, we demonstrate devices that concurrently exhibit over seven orders of magnitude modulation in rectification ratios and conductance. Our results further suggest that the interface quality does not necessarily affect Fermi-level tuning at the junction opening up possibilities for novel 2D/3D heterojunction device architectures.

cond-mat.mes-hall↗

arXiv2019

Topological magnetic-spin textures in two-dimensional van der Waals Cr2Ge2Te6

Two-dimensional (2D) van der Waals (vdW) materials show a range of profound physical properties that can be tailored through their incorporation in heterostructures and manipulated with external forces. The recent discovery of long-range ferromagnetic order down to atomic layers provides an additional degree of freedom in engineering 2D materials and their heterostructure devices for spintronics, valleytronics and magnetic tunnel junction switches. Here, using direct imaging by cryo-Lorentz transmission electron microscopy we show that topologically nontrivial magnetic-spin states, skyrmionic bubbles, can be realized in exfoliated insulating 2D vdW Cr2Ge2Te6. Due to the competition between dipolar interactions and uniaxial magnetic anisotropy, hexagonally-packed nanoscale bubble lattices emerge by field cooling with magnetic field applied along the out-of-plane direction. Despite a range of topological spin textures in stripe domains arising due to pair formation and annihilation of Bloch lines, bubble lattices with single chirality are prevalent. Our observation of topologically-nontrivial homochiral skyrmionic bubbles in exfoliated vdW materials provides a new avenue for novel quantum states in atomically-thin insulators for magneto-electronic and quantum devices.

cond-mat.mtrl-sci↗

arXiv2019

Quantum-Hall to Insulator Transition in Ultra-low-carrier-density Topological Insulator Films and a Hidden Phase of the Zeroth Landau Level

A key feature of the topological surface state under a magnetic field is the presence of the zeroth Landau level at the zero energy. Nonetheless, it has been challenging to probe the zeroth Landau level due to large electron-hole puddles smearing its energy landscape. Here, by developing ultra-low-carrier density topological insulator Sb$_2$Te$_3$ films, we were able to reach an extreme quantum limit of the topological surface state and uncover a hidden phase at the zeroth Landau level. First, we discovered an unexpected quantum-Hall-to-insulator-transition near the zeroth Landau level. Then, through a detailed scaling analysis, we found that this quantum-Hall-to-insulator-transition belongs to a new universality class, implying that the insulating phase discovered here has a fundamentally different origin from those in non-topological systems.

cond-mat.mtrl-sci↗

arXiv2019

Record-High Proximity-Induced Anomalous Hall Effect in (Bi$_x$Sb$_{1-x}$)2Te$_3$ Thin Film Grown on CrGeTe$_3$ Substrate

Quantum anomalous Hall effect(QAHE) can only be realized at extremely low temperatures in magnetically doped topological insulators(TIs) due to limitations inherent with the doping precess. In an effort to boost the quantization temperature of QAHE, magnetic proximity effect in magnetic insulator/TI heterostructures has been extensively investigated. However, the observed anomalous Hall resistance has never been more than several Ohms, presumably owing to the interfacial disorders caused by the structural and chemical mismatch. Here, we show that, by growing (BixSb1-x)2Te3(BST) thin films on structurally and chemically well-matched, ferromagnetic-insulating CeGeTe3(CGT) substrates, the proximity-induced anomalous Hall resistance can be enhanced by more than an order of magnitude. This sheds light on the importance of structural and chemical match for magnetic insulator/TI proximity systems.

cond-mat.mes-hall↗

arXiv2018

Engineering artificial topological phases via superlattices

The search for new topological materials and states of matter is presently at the forefront of quantum materials research. One powerful approach to novel topological phases beyond the thermodynamic space is to combine different topological/functional materials into a single materials platform in the form of superlattices. However, despite some previous efforts, there has been a significant gap between theories and experiments in this direction. Here, we provide the first detailed set of experimentally-verifiable phase diagrams of topological superlattices composed of archetypal topological insulator (TI), Bi$_{2}$Se$_{3}$, and normal insulator (NI), In$_{2}$Se$_{3}$, by combining molecular-level materials control, low-temperature magnetotransport measurements, and field theoretical calculations. We show how the electronic properties of topological superlattices evolve with unit-layer thicknesses and utilize the weak antilocalization effect as a tool to gain quantitative insights into the evolution of conducting channels within each set of heterostructures. This orchestrated study opens the door to the possibility of creating a variety of artificial-topological-phases by combining topological materials with various other functional building blocks such as superconductors and magnetic materials.

cond-mat.mes-hall↗

arXiv2017

Atomically-thin Femtojoule Filamentary Memristor

The morphology and dimension of the conductive filament formed in a memristive device are strongly influenced by the thickness of its switching medium layer. Aggressive scaling of this active layer thickness is critical towards reducing the operating current, voltage and energy consumption in filamentary type memristors. Previously, the thickness of this filament layer has been limited to above a few nanometers due to processing constraints, making it challenging to further suppress the on-state current and the switching voltage. Here, we study the formation of conductive filaments in a material medium with sub-nanometer thickness, formed through the oxidation of atomically-thin two-dimensional boron nitride. The resulting memristive device exhibits sub-nanometer filamentary switching with sub-pA operation current and femtojoule per bit energy consumption. Furthermore, by confining the filament to the atomic scale, we observe current switching characteristics that are distinct from that in thicker medium due to the profoundly different atomic kinetics. The filament morphology in such an aggressively scaled memristive device is also theoretically explored. These ultra-low energy devices are promising for realizing femtojoule and sub-femtojoule electronic computation, which can be attractive for applications in a wide range of electronics systems that desire ultra-low power operation.

physics.app-ph↗

arXiv2016

Disorder-driven topological phase transition in Bi2Se3 films

Topological insulators (TI) are a phase of matter that host unusual metallic states on their surfaces. Unlike the states that exist on the surface of conventional materials, these so-called topological surfaces states (TSS) are protected against disorder-related localization effects by time reversal symmetry through strong spin-orbit coupling. By combining transport measurements, angle-resolved photo-emission spectroscopy and scanning tunneling microscopy, we show that there exists a critical level of disorder beyond which the TI Bi2Se3 loses its ability to protect the metallic TSS and transitions to a fully insulating state. The absence of the metallic surface channels dictates that there is a change in topological character, implying that disorder can lead to a topological phase transition even without breaking the time reversal symmetry. This observation challenges the conventional notion of topologically-protected surface states, and will provoke new studies as to the fundamental nature of topological phase of matter in the presence of disorder.

cond-mat.mtrl-sci↗

arXiv2016

Tunable inverse topological heterostructure utilizing $(Bi_{1-x}In_{x})_{2}Se_{3}$

In typical topological insulator (TI) systems the TI is bordered by a non-TI insulator, and the surrounding conventional insulators, including vacuum, are not generally treated as part of the TI system. Here, we implement the first material system where the roles are reversed, and the TSS form around the non-TI (instead of the TI) layers. This is realized by growing a layer of the tunable non-TI $(Bi_{1-x}In_{x})_{2}Se_{3}$ in between two layers of the TI $Bi_2Se_3$ using the atomically-precise molecular beam epitaxy technique. On this tunable inverse topological platform, we systematically vary the thickness and the composition of the $(Bi_{1-x}In_{x})_{2}Se_{3}$ layer and show that this tunes the coupling between the TI layers from strongly-coupled metallic to weakly-coupled, and finally to a fully-decoupled insulating regime. This system can be used to probe the fundamental nature of coupling in TI materials and provides a tunable insulating layer for TI devices.

cond-mat.mtrl-sci↗

arXiv2015

Record Surface State Mobility and Quantum Hall Effect in Topological Insulator Thin Films via Interface Engineering

Material defects remain as the main bottleneck to the progress of topological insulators (TIs). In particular, efforts to achieve thin TI samples with dominant surface transport have always led to increased defects and degraded mobilities, thus making it difficult to probe the quantum regime of the topological surface states. Here, by utilizing a novel buffer layer scheme composed of an In2Se3/(Bi0.5In0.5)2Se3 heterostructure, we introduce a quantum generation of Bi2Se3 films with an order of magnitude enhanced mobilities than before. This scheme has led to the first observation of the quantum Hall effect in Bi2Se3.

cond-mat.mtrl-sci↗

arXiv2014

Robust topological surface states of Bi2Se3 thin films on amorphous SiO2/Si substrate and a large ambipolar gating effect

The recent emergence of topological insulators (TI) has spurred intensive efforts to grow TI thin films on various substrates. However, little is known about how robust the topological surface states (TSS) are against disorders and other detrimental effects originating from the substrates. Here, we report observation of a well-defined TSS on Bi2Se3 films grown on amorphous SiO2 (a-SiO2) substrates and a large gating effect on these films using the underneath doped-Si substrate as the back gate. The films on a-SiO2 were composed of c-axis ordered but random in-plane domains. However, despite the in-plane randomness induced by the amorphous substrate, the transport properties of these films were superior to those of similar films grown on single-crystalline Si(111) substrates, which are structurally better matched but chemically reactive with the films. This work sheds light on the importance of chemical compatibility, compared to lattice matching, for the growth of TI thin films, and also demonstrates that the technologically-important and gatable a-SiO2/Si substrate is a promising platform for TI films.

cond-mat.mtrl-sci↗

arXiv2014

Unfolding of vortices into topological stripes in a multiferroic material

Multiferroic hexagonal RMnO3 (R=rare earths) crystals exhibit dense networks of vortex lines at which six domain walls merge. While the domain walls can be readily moved with an applied electric field, the vortex cores were so far impossible to control. Our experiments demonstrate that shear strain induces a Magnus-type force pulling vortices and antivortices in opposite directions and unfolding them into a topological stripe domain state. We discuss the analogy between this effect and the current-driven dynamics of vortices in superconductors and superfluids.

cond-mat.mtrl-sci↗