arXiv subjects

Nicholas Galitzki

Publications and source records attributed to Nicholas Galitzki.

At least 19 recordsLinked to original sources

arXiv2026

In-Band Scattering and Absorption of Infrared Blocking Foam Filters for Millimeter-wave Cameras

Expanded closed-cell polymer foams are widely used as thermal infrared (IR) blocking filters in millimeter-wave cameras, particularly for Cosmic Microwave Background observations. Precise knowledge of their millimeter-wave properties is essential for optimizing sensitivity. We present broadband (150 GHz - 2 THz) transmittance spectroscopy of Styroace-II and several Zotefoam filters, fitting their spectra with a radiative transfer model incorporating dielectric absorption and Rayleigh, Mie, and higher-order scattering. For a typical 5~cm thick filter stack at 280~GHz, Styroace-II exhibits ${\sim}10\%$ scattering with absorption estimated as ${\lesssim}5\%$ by effective-medium theory, while Zotefoam HD30 offers superior performance at ${\sim}3\%$ scattering and absorption likewise bounded to ${{\lesssim}0.3\%}$. Each model component is constrained at the ${\sim}0.1\%$ transmittance level for millimeter wavelengths. We observe batch-to-batch scattering variability of up to 2 percentage points in foams with multiple tested batches. Less commonly used Zotefoam formulations (LD15 and LD24) can further reduce in-band scattering to ${<}1\%$ while maintaining negligible in-band absorption and likely comparable IR blocking due to shared polyethylene absorption features and similar cell sizes. Based on this work, a filter constructed from the best measured LD24 batch has replaced the Styroace-II filter in a Simons Observatory 220/280 GHz Small Aperture Telescope.

astro-ph.IM↗

arXiv2026

The Simons Observatory: Overview of the Cryogenic Half-wave Plate Polarization Modulators

The Simons Observatory (SO) is a ground-based Cosmic Microwave Background (CMB) experiment that is located in the Atacama plateau. The Small Aperture Telescopes (SATs) of SO are optimized for polarimetry on the degree scale. Atmospheric $1/f$ contamination of the CMB signal poses a significant challenge for observations at this angular scale. In order to control the $1/f$ noise, the SATs utilize a Cryogenic Half-Wave Plate (CHWP) in their optics. The CHWP modulates the polarization signal to a higher frequency to separate it from the unpolarized atmospheric noise. Precision measurements of the CHWP rotation angle are required to successfully recover the target polarized signals. We present a method to reconstruct the CHWP rotation angle that achieves a noise level of 0.16 $\mu\mathrm{rad\sqrt{s}}$, meeting our requirement.

astro-ph.IM↗

arXiv2026

The Simons Observatory: Rotation Performance of Cryogenic Half-Wave Plate Polarization Modulators

We present the on-site rotation performance of the first three cryogenic continuously rotating half-wave plate (HWP) polarization modulators for the Simons Observatory small aperture telescopes (SATs). The SATs operate at an altitude of 5200 m in the Atacama Desert in northern Chile, and measure the degree-scale cosmic microwave background polarization to search for primordial $B$-mode polarization. To this end, the SATs employ a 505 mm diameter 50 K cryogenic HWP polarization modulator to suppress atmospheric $1/f$ noise and to mitigate systematic uncertainties. We present methods for reconstructing the rotation of our polarization modulators, enabling detailed evaluations of their rotation angle accuracy, stability, displacements, and vibrations. We achieve the required rotation angle accuracy in more than 99.9% of observations, with a median noise level of 0.16 $\mu$rad$\sqrt{\text{s}}$. We also achieve one-dimensional measurement of the rotor displacement with an accuracy of 0.06 $\mu\text{m}\sqrt{\text{s}}$. Our results demonstrate the on-site rotation performance, rotation angle reconstruction method, and robustness of the polarization angle modulators. This is a crucial step towards achieving the SAT science goals.

astro-ph.IM↗

arXiv2026

The Simons Observatory: On-sky performance of radio-transparent multi-layer insulation (RT-MLI) using Styroace-II Styrofoam

We present the on-sky performance of a Radio-Transparent Multi-Layer Insulation filter (RT-MLI) that uses Styroace-II styrofoam to reject ambient thermal radiation from entering a 0.42 m diameter aperture to a sub-100 mK bolometric detector array cooled by a dilution-refrigerator. We find that greater than 90% of the expected incident infra-red (IR) radiation is rejected, resulting in $<$12 W of measured transmitted power. Transmitted power in the detector passbands is consistent with a lower bound of 95%. We address filter design and placement, thermal loading, and mm-wave transmission.

astro-ph.IM↗

arXiv2025

The Simons Observatory: Detector Polarization Angle Calibration using Sparse Wire Grid with Initial Data Sets of the Small Aperture Telescope

Improved measurements of $B$-modes in the cosmic microwave background can be obtained through accurate calibration of the orientation of detector antennas as projected onto the sky. Miscalibration of the detector polarization angle leads to a leakage of $E$-modes into $B$-modes, which can bias the detection of the latter. To achieve a $\sigma(r)$ of 0.003, the Simons Observatory Small Aperture Telescopes are required to calibrate the global polarization angle on the sky with an accuracy ${\lesssim}0.1^\circ$. We demonstrate a fully remote-controllable calibration system using a ``sparse wire grid," which injects a rotatable linear polarized signal across the telescope's focal plane. This calibration system is installed and operational on a Small Aperture Telescope at its observing site at the Parque Astron\'omico in the Atacama desert in Chile. We developed a pipeline for the detector polarization angle calibration, and demonstrate it using initial data for 93~GHz and 145~GHz frequency bands. The observed distribution of detector polarization angles is in agreement with the instrument design. Statistical uncertainties for the relatively calibrated polarization angles are $0.02^\circ$ and $0.03^\circ$ at 93~GHz and 145~GHz, respectively. Systematic uncertainty was evaluated to be $0.08^\circ$ at the hardware development and fabrication stage. Their sum in quadrature is less than $0.1^\circ$.

astro-ph.IM↗

arXiv2025

Cryogenic Materials Repository: A Public Resource and New Measurements for Cryogenic Research Applications

Low-temperature systems play a vital role in a variety of scientific research applications, including the next generation of cosmology and astrophysics telescopes. More ambitious cryogenic applications require precise estimates of the thermal conductivity of materials and thermal joints to meet project goals. We present the development of the Cryogenic Material Repository (CMR), a public GitHub repository of cryogenic material properties data created to support and enable researchers across scientific disciplines to accurately and efficiently design and assess cryogenic systems. We also present updated sub-Kelvin thermal conductivity results for select carbon fiber reinforced polymer and aluminum alloy samples.

astro-ph.IM↗

arXiv2025

The Simons Observatory: Quantifying the impact of beam chromaticity on large-scale B-mode science

The Simons Observatory (SO) Small Aperture Telescopes (SATs) will observe the Cosmic Microwave Background (CMB) temperature and polarization at six frequency bands. Within these bands, the angular response of the telescope (beam) is convolved with the instrument's spectral response (commonly called bandpass) and the signal from the sky, which leads to the band-averaged telescope beam response, which is sampled and digitized. The spectral properties of the band-averaged beam depend on the natural variation of the beam within the band, referred to as beam chromaticity. In this paper, we quantify the impact of the interplay of beam chromaticity and intrinsic frequency scaling from the various components that dominate the polarized sky emission on the tensor-to-scalar ratio, $r$, and foreground parameters. We do so by employing a parametric power-spectrum-based foreground component separation algorithm, namely BBPower, to which we provide beam-convolved time domain simulations performed with the beamconv software while assuming an idealized version of the SO SAT optics. We find a small, $0.02\sigma$, bias on $r$, due to beam chromaticity, which seems to mostly impact the dust spatial parameters, causing a maximum $0.77 \sigma$ bias on the dust $B$-mode spectra amplitude, $A_{d}$, when employing Gaussian foreground simulations. However, we find all parameter biases to be smaller than $1\sigma$ at all times, independently of the foreground model. This includes the case where we introduce additional uncertainty on the bandpass shape, which accounts for approximately half of the total allowed gain uncertainty, as estimated in previous work for the SO SATs.

astro-ph.CO↗

arXiv2025

PROTOCALC, A W-band polarized calibrator for CMB Telescopes: application to Simons Observatory and CLASS

Current- and next-generation Cosmic Microwave Background (CMB) experiments will measure polarization anisotropies with unprecedented sensitivities. The need for high precision in these measurements underscores the importance of gaining a comprehensive understanding of instrument properties, with a particular emphasis on the study of the beam properties and, in particular, their polarization characteristics, and the measurement of the polarization angle. In this context, a major challenge lies in the scarcity of millimeter polarized astrophysical sources with sufficient brightness and calibration knowledge to meet the stringent accuracy requirements of future CMB missions. This led to the development of a drone-borne calibration source designed for frequency band centered on approximately 90 GHz band, matching a commonly used channel in ground based CMB measurements. The PROTOtype CALibrator for Cosmology, PROTOCALC, has undergone thorough in-lab testing, and its properties have been subsequently modeled through simulation software integrated into the standard Simons Observatory (SO) analysis pipeline. Moreover, the PROTOCALC system has been tested in the field, having been deployed twice on calibration campaigns with CMB telescopes in the Atacama desert. The data collected constrain the roll angle of the source with a statistical accuracy of $0.045^\circ$.

astro-ph.IM↗

arXiv2025

Simons Observatory: Characterization of the Large Aperture Telescope Receiver

The Simons Observatory (SO) is a ground-based cosmic microwave background (CMB) survey experiment that currently consists of three 0.42m small-aperture telescopes (SATs) and one 6m large-aperture telescope (LAT), located at an elevation of 5200m in the Atacama Desert in Chile. At the LAT's focal plane, SO will install >62,000 transition-edge sensor detectors across 13 optics tubes (OTs) within the Large Aperture Telescope Receiver (LATR), the largest cryogenic camera ever built to observe the CMB. Here we report on the validation of the LATR in the laboratory and the subsequent dark testing and validation within the LAT. We show that the LATR meets cryogenic, optical, and detector specifications required for high-sensitivity measurements of the CMB. At the time of writing, the LATR is installed in the LAT with six OTs (corresponding to >31,000 detectors), and the LAT mirrors and remaining seven OTs are undergoing development.

astro-ph.IM↗

arXiv2024

The Simons Observatory: Design, Integration, and Current Status of Small Aperture Telescopes

The Simons Observatory (SO) is a cosmic microwave background (CMB) survey experiment located in the Atacama Desert in Chile at an elevation of 5200 meters, nominally consisting of an array of three 0.42-meter small aperture telescopes (SATs) and one 6-meter large aperture telescope (LAT). SO will make accurate measurements of the CMB temperature and polarization spanning six frequency bands ranging from 27 to 280 GHz, fielding a total of $\sim$68,000 detectors covering angular scales between one arcminute to tens of degrees. In this paper, we focus on the SATs, which are tailored to search for primordial gravitational waves, with the primary science goal of measuring the primordial tensor-to-scalar ratio \textit{r} at a target level of $\sigma(r) \approx 0.003$. We discuss the design drivers, scientific impact, and current deployment status of the three SATs, which are scheduled to start taking data in the coming year. The SATs aim to map 10\% of the sky at a 2 $\mu$K-arcmin noise level observing at mid-frequencies (93/145 GHz), with additional ultra-high-frequency (225/280 GHz) and low-frequency (27/39 GHz) targets to yield galactic foreground-subtracted measurements.

astro-ph.IM↗

arXiv2024

The Simons Observatory: laboratory beam characterization for the first small aperture telescope

The Simons Observatory is a ground-based telescope array located at an elevation of 5200 meters, in the Atacama Desert in Chile, designed to measure the temperature and polarization of the cosmic microwave background. It comprises four telescopes: three 0.42-meter small aperture telescopes (SATs), focused on searching for primordial gravitational waves, and one 6-meter large aperture telescope, focused on studying small-scale perturbations. Each of the SATs will field over 12,000 TES bolometers, with two SATs sensitive to both 90 and 150GHz frequency bands (SAT-MF1, and SAT-MF2), while the third SAT is sensitive to 220 and 280GHz frequency bands. Prior to its deployment in 2023, the optical properties of SAT-MF1 were characterized in the laboratory. We report on measurements of near-field beam maps acquired using a thermal source along with measurements using a holographic method that enables characterization of the amplitude and phase of the beam response, yielding an estimate of the far-field radiation pattern received by SAT-MF1. We find that the near-field half-width-half-maximum (HWHM) requirements are met across the focal plane array for the 90GHz frequency band, and through most of the focal plane array for the 150GHz frequency band. The mean of the bandpass averaged HWHM of the edge-detector focal plane modules match the simulated HWHM to 10.4%, with the discrepancy caused by fringing in the simulation. The measured beam profiles match simulations to within 2dB from the beam center to at least the -10dB level. Holography estimates of the far-field 90GHz beams match the full-width-half-maximum from simulation within 1%, and the beam profiles deviate by less than 2dB inside the central lobe. The success of the holography and thermal beam map experiments confirmed the optical performance was sufficient to meet the science requirements. On-site observations are currently underway.

astro-ph.IM↗

arXiv2024

The Simons Observatory: A Minimum-Cost Matching Algorithm for Pairing Measured Resonances with Designed Detectors

The Simons Observatory (SO) is a ground-based cosmic microwave background experiment currently being deployed to Cerro Toco in the Atacama Desert of Chile. The initial deployment of SO, consisting of three 0.46m-diameter small-aperture telescopes and one 6m-primary large-aperture telescope, will field over 60,000 transition-edge sensors that will observe at frequencies between 30 GHz and 280 GHz. SO will read out its detectors using Superconducting Quantum Interference Device (SQUID) microwave-frequency multiplexing $\mu$mux, a form of frequency division multiplexing where an RF-SQUID couples each TES bolometer to a superconducting resonator tuned to a unique frequency. Resonator frequencies are spaced roughly every 2 MHz between 4 and 6 GHz, allowing for multiplexing factors on the order of 1000. One challenge of $\mu$mux is matching each tracked resonator with its corresponding physical detector. Variations in resonator fabrication, and frequency shifts between cooldowns caused by trapped flux can cause the measured resonance frequencies to deviate significantly from their designed values. In this study, we introduce a method for pairing measured and designed resonators by constructing a bipartite graph based on the two resonator sets, and assigning edge weights based on measured resonator and detector properties such as resonance frequency, detector pointing, and assigned bias lines. Finding the minimum-cost matching for a given set of edge weights is a well-studied problem that can be solved very quickly, and this matching tells us the best assignment of measured resonators to designed detectors for our input parameters. We will present results based on the first on-sky measurements from SAT1, the first SO MF small-aperture telescope.

astro-ph.IM↗

arXiv2024

The Simons Observatory: Deployment and current configuration of the Observatory Control System for SAT-MF1 and data access software systems

The Simons Observatory (SO) is a Cosmic Microwave Background experiment located in the Atacama Desert in Chile. SO consists of three small aperture telescopes (SATs) and one large aperture telescope (LAT) with a total of 60,000 detectors in six frequency bands. As an observatory, SO encompasses hundreds of hardware components simultaneously running at different readout rates, all separate from its 60,000 detectors on-sky and their metadata. We provide an overview of commissioning SO's data acquisition software system for SAT-MF1, the first SAT deployed to the Atacama site. Additionally, we share insights from deploying data access software for all four telescopes, detailing how performance limitations affected data loading and quality investigations, which led to site-compatible software improvements.

astro-ph.IM↗

arXiv2024

The Simons Observatory: Deployment of the observatory control system and supporting infrastructure

The Simons Observatory (SO) is a cosmic microwave background (CMB) observatory consisting of three small aperture telescopes and one large aperture telescope. SO is located in the Atacama Desert in Chile at an elevation of 5180m. Distributed among the four telescopes are over 60,000 transition-edge sensor (TES) bolometers across six spectral bands centered between 27 and 280 GHz. A large collection of ancillary hardware devices which produce lower rate `housekeeping' data are used to support the detector data collection. We developed a distributed control system, which we call the observatory control system (ocs), to coordinate data collection among all systems within the observatory. ocs is a core component of the deployed site software, interfacing with all on-site hardware. Alongside ocs we utilize a combination of internally and externally developed open source projects to enable remote monitoring, data management, observation coordination, and data processing. Deployment of a majority of the software is done using Docker containers. The deployment of software packages is partially done via automated Ansible scripts, utilizing a GitOps based approach for updating infrastructure on site. We describe an overview of the software and computing systems deployed within SO, including how those systems are deployed and interact with each other. We also discuss the timing distribution system and its configuration as well as lessons learned during the deployment process and where we plan to make future improvements.

astro-ph.IM↗

arXiv2024

The Simons Observatory: Alarms and Detector Quality Monitoring

The Simons Observatory (SO) is a group of modern telescopes dedicated to observing the polarized cosmic microwave background (CMB), transients, and more. The Observatory consists of four telescopes and instruments, with over 60,000 superconducting detectors in total, located at ~5,200 m altitude in the Atacama Desert of Chile. During observations, it is important to ensure the detectors, telescope platforms, calibration and receiver hardware, and site hardware are within operational bounds. To facilitate rapid response when problems arise with any part of the system, it is essential that alerts are generated and distributed to appropriate personnel if components exceed these bounds. Similarly, alerts are generated if the quality of the data has become degraded. In this paper, we describe the SO alarm system we developed within the larger Observatory Control System (OCS) framework, including the data sources, alert architecture, and implementation. We also present results from deploying the alarm system during the commissioning of the SO telescopes and receivers.

astro-ph.IM↗

arXiv2024

Simons Observatory: Observatory Scheduler and Automated Data Processing

The Simons Observatory (SO) is a next-generation ground-based telescope located in the Atacama Desert in Chile, designed to map the cosmic microwave background (CMB) with unprecedented precision. The observatory consists of three small aperture telescopes (SATs) and one large aperture telescope (LAT), each optimized for distinct but complementary scientific goals. To achieve these goals, optimized scan strategies have been defined for both the SATs and LAT. This paper describes a software system deployed in SO that effectively translates high-level scan strategies into realistic observing scripts executable by the telescope, taking into account realistic observational constraints. The data volume of SO also necessitates a scalable software infrastructure to support its daily data processing needs. This paper also outlines an automated workflow system for managing data packaging and daily data reduction at the site.

astro-ph.IM↗

arXiv2024

Simons Observatory: Pre-deployment Performance of a Large Aperture Telescope Optics Tube in the 90 and 150 GHz Spectral Bands

The Simons Observatory will map the temperature and polarization over half of the sky, at millimeter wavelengths in six spectral bands from the Atacama Desert in Chile. These data will provide new insights into the genesis, content, and history of our Universe; the astrophysics of galaxies and galaxy clusters; objects in our solar system; and time-varying astrophysical phenomena. This ambitious new instrument suite, initially comprising three 0.5 m small-aperture telescopes and one 6 m large aperture telescope, is designed using a common combination of new technologies and new implementations to realize an observatory significantly more capable than the previous generation. In this paper, we present the pre-deployment performance of the first mid-frequency "optics tube" which will be fielded on the large aperture telescope with sensitivity to the 90 and 150 GHz spectral bands. This optics tube contains lenses, filters, detectors, and readout components, all of which operate at cryogenic temperatures. It is one of seven that form the core of the large aperture telescope receiver in its initial deployment. We describe this optics tube, including details of comprehensive testing methods, new techniques for beam and passband characterization, and its measured performance. The performance metrics include beams, optical efficiency, passbands, and forecasts for the on-sky performance of the system. We forecast a sensitivity that exceeds the requirements of the large aperture telescope with greater than 30% margin in each spectral band, and predict that the instrument will realize diffraction-limited performance and the expected detector passbands.

astro-ph.IM↗

arXiv2024

The Simons Observatory: Design, integration, and testing of the small aperture telescopes

The Simons Observatory (SO) is a cosmic microwave background (CMB) survey experiment that includes small-aperture telescopes (SATs) observing from an altitude of 5,200 m in the Atacama Desert in Chile. The SO SATs will cover six spectral bands between 27 and 280 GHz to search for primordial B-modes to a sensitivity of $\sigma(r)=0.002$, with quantified systematic errors well below this value. Each SAT is a self-contained cryogenic telescope with a 35$^\circ$ field of view, 42 cm diameter optical aperture, 40 K half-wave plate, 1 K refractive optics, and $<0.1$ K focal plane that holds $>12,000$ TES detectors. We describe the nominal design of the SATs and present details about the integration and testing for one operating at 93 and 145 GHz.

astro-ph.IM↗