arXiv subjects

Nicola M. Pugno

Publications and source records attributed to Nicola M. Pugno.

At least 19 recordsLinked to original sources

arXiv2026

Predictive beam-lattice reduction for higher-order topological modes in a 2D SSH phononic crystal

We develop a mechanically faithful reduced model for a two-dimensional topological phononic crystal composed of rigid square masses connected by slender elastic ligaments. Exploiting Euler Bernoulli beam theory, we derive a Hermitian 12 degree of freedom dynamical matrix that retains in-plane translations, rotations, and ligament eccentricity. This reduction captures effects that are absent from scalar mass spring SSH models while remaining computationally much more tractable and more easily interpretable than full finite element simulations. Dimerizing the ligament widths produces a mechanical 2D SSH lattice with a full band gap and a quantized bulk polarization. The sign of the dimerization controls the transition from trivial to non trivial phases, while ligament eccentricity provides an additional purely geometric mechanism for changing the topology. Ribbon and finite cell calculations predict in gap edge and corner modes, quantified by localization measures and confirmed by finite element simulations. Measurements on 3D printed samples show an evanescent response in the trivial structure and enhanced boundary/corner response in the non trivial structure within the predicted gap. The results provide a validated route for designing topological elastic metamaterials using a continuum informed discrete model rather than either idealized mass spring networks or brute force numerical optimization.

physics.comp-ph↗

arXiv2025

Longitudinal-flexural wave mode conversion via periodically undulated waveguides with constant and graded profiles

Wave mode conversion allows to transform energy from one propagating wave type to another at a boundary where a change in material properties or geometry occurs. Converting longitudinal waves to flexural ones is of particular interest in elasticity due to their significant displacement amplitudes, facilitating detection at the surface for practical applications. Typically, the design of wave conversion devices requires (i) the use of locally resonant structures with a spacing much shorter than the associated wavelengths, or (ii) architected media whose effective properties yield efficient mode conversion at selected frequencies. In both cases, the realization of these devices may incur in fabrication difficulties, thus requiring alternative solutions based on simpler designs that can retain the wave manipulation capabilities of interest. In this paper, we propose the use of single-phase periodically undulated beams to design phononic crystals that achieve wave mode conversion between longitudinal and flexural waves. We derive the corresponding dispersion relations using the plane wave expansion method and demonstrate that the coupling between longitudinal and flexural wave modes can be manipulated using an undulated profile, generating mode veering with inverted group velocities. The wave conversion mechanism is verified both computationally and experimentally, showing good agreement. Our findings indicate a versatile design strategy for phononic crystals with efficient wave conversion property, enabling applications in structural health monitoring, sensing, and non-destructive testing.

physics.app-ph↗

arXiv2024

The Mechanical Behavior of Macroscale Single-crystal Graphene

Despite extensive microscale studies, the macroscopic mechanical properties of monolayer graphene remain underexplored. Here, we report the Young's modulus ($E$ = 1.11 $\pm$ 0.04 TPa), tensile strength ($σ$ = 27.40 $\pm$ 4.36 GPa), and failure strain ($ε_f$ = 6.01 $\pm$ 0.92 %) of centimeter-scale single-crystal monolayer graphene (SCG) 'dog bone' samples with edges aligned along the zigzag (zz) direction, supported by an ultra-thin polymer (polycarbonate) film. For samples with edges along the armchair (ac) direction, we obtain $E$ = 1.01 $\pm$ 0.10 TPa, $σ$ = 20.21 $\pm$ 3.22 GPa, $ε_f$ = 3.69 $\pm$ 0.38 %, and for chiral samples whose edges were between zz and ac, we obtain $E$= 0.75 $\pm$ 0.12 TPa, $σ$ = 23.56 $\pm$ 3.42 GPa, and $ε_f$ = 4.53 $\pm$ 0.40 %. The SCG is grown on single crystal Cu(111) foils by chemical vapor deposition (CVD). We used a home-built 'float-on-water' (FOW) tensile testing system for tensile loading measurements that also enabled in situ crack observation. The quantized fracture mechanics (QFM) analysis predicts an edge defect size from several to tens of nanometers based on chirality and notch angle. Through Weibull analysis and given that the fatal defects are confined on the edges of macroscale samples, we projected strength ranging from 13.67 to 18.43 GPa for an A4-size SCG according to their chirality. The exceptional mechanical performance of macroscale single crystal graphene (SCG) paves the way for its widespread use in a very wide variety of applications.

cond-mat.mes-hall↗

arXiv2024

About: "Float stacked graphene PMMA laminate"

We report the scientific and technical queries regarding the article reported by Kim et al.1 on the mechanical properties of graphene-poly(methyl methacrylate) (PMMA) composites. Our analysis finds that the current experimental data is insufficient to fully support the conclusions presented in the article. We suggest the enhancement in Youngs modulus and strength of the graphene-PMMA laminates (GPL) samples are mainly due to the heat treatment of the polymer rather than the incorporation of graphene. The Raman spectroscopy data (as per our analysis) for the GPL samples indicates that large cracks and defects were introduced during the hot rolling process used to fabricate the graphene-PMMA composite. We believe that the queries will aid the audience in better understanding the mechanical response of graphene-PMMA composites.

physics.app-ph↗

arXiv2023

Elastic wave dispersion in layered media with suture joints: influence of structural hierarchy and viscoelasticity

Suture joints contribute to the exceptional combination of stiffness, strength, toughness and efficient load bearing and transmission of many biological structures like the cranium or ammonite fossil shells. However, their role in the attenuation of vibrations and effect on dynamic loads is less clear. Moreover, the self-similar hierarchical geometry often associated with suture joints renders its treatment with standard numerical approaches computationally prohibitive. To address this problem, this paper investigates the dynamic response of periodic layered media with suture joints using an analytical approach based on material homogenization. A general trapezoidal suture geometry is considered together with the fundamental ingredients of hierarchy and viscoelasticity. The Spectral Element Method and Bloch theorem are used to derive the dispersion relation and band diagram of the system, including propagating and evanescent dispersion modes. A strong influence of the suture morphology and material properties emerges, and the analysis reveals an important advantage of adding hierarchy, i.e. the possibility of simultaneously obtaining wider bandgaps and their shift to higher frequencies. A synergy between hierarchy and structure is also observed, providing superior levels of wave attenuation. These findings suggest a possible design concept for bioinspired devices with efficient and tailorable wave attenuation properties.

physics.gen-ph↗

arXiv2023

Ice-bridging frustration by self-ejection of single droplets results in superior anti-frosting surfaces

Surfaces capable of delaying the frosting passively and facilitating its removal are highly desirable in fields where ice introduces inefficiencies and risks. Coalescence jumping, enabled by highly hydrophobic surfaces, is already exploited to slow down the frosting but it is insufficient to completely eliminate the propagation by ice-bridging. We show how the self-ejection of single condensation droplets can frustrate the ice bridges of all the condensation droplets leading to a frost velocity lower than 0.5 um/s thus dropping below the current limits of passive surfaces by a factor of at least 2. Arrays of truncated microcones, covered by uniformly hydrophobic nanostructures, enable individual condensation droplets to growth and self-propel towards the top of the microstructures and to self-eject once a precise volume is reached. The independency of self-ejection on the neighbour droplets allows a precise control on the droplets' size and distance distributions and the ice-bridging frustration. The most performant microstructures tend to cones with a sharp tip on which the percentage of self-ejection is maximum. Looking towards applications, tapered microstructures allow maximising the percentage of self-ejecting drops while maintaining a certain mechanical strength. Further, it is shown that inserted pinning sites are not essential, which greatly facilitates manufacturing.

physics.flu-dyn↗

arXiv2023

Single condensation droplet self-ejection from divergent structures with uniform wettability

Coalescence-jumping of condensation droplets is widely studied for anti-icing, condensation heat transfer, water harvesting and self-cleaning. Another phenomenon that is arousing interest for potential enhancements is the individual droplet self-ejection. However, whether it is possible from divergent structures without detachment from pinning sites remains unexplored. Here we investigate the self-ejection of individual droplets from divergent, uniformly hydrophobic structures. We designed, fabricated and tested arrays of nanostructured truncated microcones arranged in a square pattern. The dynamics of the single condensation droplet is revealed with high speed microscopy: it self-ejects after cycles of growth and self-propulsion between four cones. Adopting the conical pore for simplicity, we modelled the slow iso-pressure growth phases and the surface energy release-driven rapid transients enabled once a dynamic configuration is reached. In addition to easier fabrication, microcones with uniform wettability have the potential to allow self-ejection of almost all the droplets with a precise size while maintaining mechanical resistance and thus promising great improvements in a plethora of applications.

physics.flu-dyn↗

arXiv2023

Overcoming water diffusion limitations in hydrogels via microtubular graphene networks for soft actuators

Hydrogel-based soft actuators can operate in sensitive environments, bridging the gap of rigid machines interacting with soft matter. However, while stimuli-responsive hydrogels can undergo extreme reversible volume changes of up to ~90%, water transport in hydrogel actuators is in general limited by their poroelastic behavior. For poly(N-isopropylacrylamide) (PNIPAM) the actuation performance is even further compromised by the formation of a dense skin layer. Here we show, that incorporating a bioinspired microtube graphene network into a PNIPAM matrix with a total porosity of only 5.4 % dramatically enhances actuation dynamics by up to ~400 % and actuation stress by ~4000 % without sacrificing the mechanical stability, overcoming the water transport limitations. The graphene network provides both untethered light-controlled and electrically-powered actuation. We anticipate that the concept provides a versatile platform for enhancing the functionality of soft matter by combining responsive and two-dimensional materials, paving the way towards designing soft intelligent matter.

cond-mat.mtrl-sci↗

arXiv2023

3D printed architected lattice structures by material jetting

High-precision 3D printing technology opens to almost endless opportunities to design complex shapes present in tailored architected materials. The scope of this work is to review the latest studies regarding 3D printed lattice structures that involve the use of photopolymers fabricated by Material Jetting (MJ), with a focus on the widely used Polyjet and MultiJet techniques. The main aspects governing this printing process are introduced to determine their influence during the fabrication of 3D printed lattices. Performed experimental studies, considered assumptions, and constitutive models for the respective numerical simulations are analyzed. Furthermore, an overview of the latest extensively studied 3D printed architected lattice materials is exposed by emphasizing their achieved mechanical performances through the use of Ashby plots. Then, we highlight the advantages, limitations, and challenges of the material jetting technology to manufacture tunable architected materials for innovative devices, oriented to several engineering applications. Finally, possible approaches for future works and gaps to be covered by further research are indicated, including cost and environmental-related issues.

cs.CE↗

arXiv2022

Wave attenuation in viscoelastic hierarchical plates

Phononic crystals (PCs) are periodic structures obtained by the spatial arrangement of materials with contrasting properties, which can be designed to efficiently manipulate mechanical waves. Plate structures can be modeled using the Mindlin-Reissner plate theory and have been extensively used to analyze the dispersion relations of PCs. Although the analysis of the propagating characteristics of PCs may be sufficient for simple elastic structures, analyzing the evanescent wave behavior becomes fundamental if the PC contains viscoelastic components. Another complication is that increasingly intricate material distributions in the unit cell of PCs with hierarchical configuration may render the calculation of the complex band structure (i.e., considering both propagating and evanescent waves) prohibitive due to excessive computational workload. In this work, we propose a new extended plane wave expansion formulation to compute the complex band structure of thick PC plates with arbitrary material distribution using the Mindlin-Reissner plate theory containing constituents with a viscoelastic behavior approximated by a Kelvin-Voigt model. We apply the method to investigate the evanescent behavior of periodic hierarchically structured plates for either (i) a hard purely elastic matrix with soft viscoelastic inclusions or (ii) a soft viscoelastic matrix with hard purely elastic inclusions. Our results show that for (i), an increase in the hierarchical order leads to a weight reduction with relatively preserved attenuation characteristics, including attenuation peaks due to locally resonant modes that present a decrease in attenuation upon increasing viscosity levels. For (ii), changing the hierarchical order implies in opening band gaps in distinct frequency ranges, with an overall attenuation improved by an increase in the viscosity levels.

physics.app-ph↗

arXiv2022

Hierarchical auxetic and isotropic porous medium with extremely negative Poisson's ratio

We propose a novel two-dimensional hierarchical auxetic structure consisting of a porous medium in which a homogeneous matrix includes a rank-two set of cuts characterised by different scales. The six-fold symmetry of the perforations makes the medium isotropic in the plane. Remarkably, the mesoscale interaction between the first- and second-level cuts enables the attainment of a value of the Poisson's ratio close to the minimum reachable limit of -1. The effective properties of the hierarchical auxetic structure are determined numerically, considering both a unit cell with periodic boundary conditions and a finite structure containing a large number of repeating cells. Further, results of the numerical study are validated experimentally on a polymeric specimen with appropriately arranged rank-two cuts, tested under uniaxial tension. We envisage that the proposed hierarchical design can be useful in numerous engineering applications exploiting an extreme auxetic effect

physics.app-ph↗

arXiv2022

Robust substrate anchorages of silk lines with extensible nano-fibres

Living systems are built of multiscale-composites: materials formed of components with different properties that are assembled in complex micro- and nano-structures. Such biological multiscale-composites often show outstanding physical properties that are unachieved by artificial materials. A major scientific goal is thus to understand the assembly processes and the relationship between structure and function in order to reproduce them in a new generation of biomimetic high-performance materials. Here, we tested how the assembly of spider silk nano-fibres (i.e. glue coated 0.5 micron thick fibres produced by so-called piriform glands) into different micro-structures correlates with mechanical performance by empirically and numerically exploring the mechanical behaviour of line anchors in an orb weaver, a hunting spider and two ancient web builders. We demonstrate that the anchors of orb weavers exhibit outstanding mechanical robustness with minimal material use by the indirect attachment of the silk line to the substrate through a soft domain ('bridge'). This principle can be used to design new artificial high-performance attachment systems.

physics.app-ph↗

arXiv2022

Bioinspired periodic panels optimized for acoustic insulation

The design of structures that can yield efficient sound insulation performance is a recurring topic in the acoustic engineering field. Special attention is given to panels, which can be designed using several approaches to achieve considerable sound attenuation. Previously, we have presented the concept of thickness-varying periodic plates with optimized profiles to inhibit flexural wave energy propagation. In this work, motivated by biological structures that present multiple locally resonant elements able to cause acoustic cloaking, we extend our shape optimization approach to design panels that achieve improved acoustic insulation performance using either thickness-varying profiles or locally resonant attachments. The optimization is performed using numerical models that combine the Kirchhoff plate theory and the plane wave expansion method. Our results indicate that panels based on locally resonant mechanisms have the advantage of being robust against variation in the incidence angle of acoustic excitation and, therefore, are preferred for single-leaf applications.

physics.app-ph↗

arXiv2022

Band gap enhancement in periodic frames using hierarchical structures

The quest for novel designs for lightweight phononic crystals and elastic metamaterials with wide lowfrequency band gaps has proven to be a significant challenge in recent years. In this context, lattice-type materials represent a promising solution, providing both lightweight properties and significant possibilities of tailoring mechanical and dynamic properties. Additionally, lattice structures also enable the generation of hierarchical architectures, in which basic constitutive elements with different characteristic length scales can be combined. In this work, we propose 1D- and 2D-periodic phononic crystals made of spatial frames inspired by a spider web-based architecture. Specifically, hierarchical plane structures based on a combination of frames with a variable cross-section are proposed and exploited to open and enhance band gaps with respect to their non-hierarchical counterparts. Our results show that hierarchy is effective in broadening existing band gaps as well as opening new full band gaps in non-hierarchical periodic structures.

physics.app-ph↗

arXiv2022

Correlation between slip precursors and topological length scales at the onset of frictional sliding

Understanding the interplay between concurrent length scales is a fundamental issue in many problems involving friction between sliding interfaces, from tribology to the study of earthquakes and seismic faults. On the one hand, a macroscopic sliding event is preceded by slip precursors with a characteristic propagation length scale. On the other hand, the emergent frictional properties can be modified by surface patterning depending on their geometric length scale. This suggests that macroscopic sliding of structured surfaces is governed by the interplay between the length scale of the slip precursors and those characterizing the geometric features. In this paper, we investigate these aspects by means of numerical simulations using a two-dimensional spring-block model. We discuss the influence of the geometric features on the occurrence and localization of slip precursors, extending the study to interfaces characterized by two geometric length scales. We find that different types of detachment sequences are triggered by specific surface structures, depending on their scales and relation to sliding direction, leading to a macroscopically smooth transition to sliding in the case of hierarchical and/or anisotropic features. These concepts could be exploited in devices switching from static to dynamic sliding, and can contribute to an improvement in the understanding and interpretation of seismic data

physics.app-ph↗

arXiv2022

Design and characterization of cochlea-inspired tonotopic resonators

The cochlea has long been the subject of investigation in various research fields due to its intriguing spiral architecture and unique sensing characteristics. One of its most interesting features is the ability to sense acoustic waves at different spatial locations, based on their frequency content. In this work, we propose a novel design for a tonotopic resonator, based on a cochlea-inspired spiral. The resulting structure was subjected to an optimization process to exhibit out-of-plane vibration modes with mean out-of-plane displacement maxima distributed along its centerline spanning nearly a two-decade frequency range. Numerical simulations are performed to demonstrate the concept, which is also confirmed experimentally on a 3D printed structure. The obtained frequency-dependent distribution is shown to be a viable source of information for the discrimination of signals with various frequency components. The harnessed tonotopic features can be used as a fundamental principle to design structures with applications in areas such as non-destructive testing and vibration attenuation.

physics.app-ph↗

arXiv2022

HR-EBSD analysis of in situ stable crack growth at the micron scale

Understanding the local fracture resistance of microstructural features. such as brittle inclusions, coatings, and interfaces at the microscale under complex loading conditions is critical for microstructure-informed design of materials. In this study, a novel approach has been formulated to decompose the J-integral evaluation of the elastic energy release rate to the three-dimensional stress intensity factors directly from experimental measurements of the elastic deformation gradient tensors of the crack field by in situ high (angular) resolution electron backscatter diffraction (HR-EBSD). An exemplar study is presented of a quasi-static crack, inclined to the observed surface, propagating on low index {hkl} planes in a (001) single crystal silicon wafer.

cond-mat.mtrl-sci↗

arXiv2022

Rain energy harvesting using atomically thin Gadolinium Telluride decorated 3D Printed nanogenerator

The 3D printing technology offers an innovative approach for developing energy storage devices to create facile and low-cost customized electrodes for modern electronics. Generating electric potential by moving a droplet of ionic solution over two-dimensional (2D) materials is a novel method for rain energy harvesting. This work demonstrated a liquid-solid contact electrification-based 3D printed nanogenerator where raindrop passes through the positively charged ultrathin Gadolinium Telluride (Gd2Te3) sheets. Experimental results showed that voltage as high as ~0.6 V could be generated by moving a droplet of ionic solution on the decorated 3D printed nanogenerator. The output efficiency of the nanogenerator is increased ~400% by enhancing the surface area of copious 3D printed porous structures. Density Functional Theory (DFT) calculations are done, revealing that the high electrical conductivity of (112) surface of Gd2Te3 is due to the p-type charge carriers. Additionally, we illustrate the enhancement of the output performance (~0.8V) by using a graphite rod and arbitrarily manipulating the surface charge. Therefore, this work can open up a new avenue to advance scientific research of Blue energy harvesting and tackle the energy crisis.

physics.app-ph↗