Searcharxiv⌕ Search

arXiv subjects

Nicola M. Pugno

Publications and source records attributed to Nicola M. Pugno.

At least 37 records · Page 2Linked to original sources

Understanding Anharmonic Effects on Hydrogen Desorption Characteristics of Mg$_n$H$_{2n}$ Nanoclusters by ab initio trained Deep Neural Network

Magnesium hydride (MgH$_2$) has been widely studied for effective hydrogen storage. However, its bulk desorption temperature (553 K) is deemed too high for practical applications. Besides doping, a strategy to decrease such reaction energy for releasing hydrogen is the use of MgH$_2$-based nanoparticles (NPs). Here, we investigate first the thermodynamic properties of Mg$_n$H$_{2n}$ NPs ($n<10$) from first-principles, in particular by assessing the anharmonic effects on the enthalpy, entropy and thermal expansion by means of the Stochastic Self Consistent Harmonic Approximation (SSCHA). The latter method goes beyond previous approaches, typically based on molecular mechanics and the quasi-harmonic approximation, allowing the ab initio calculation of the fully-anharmonic free energy. We find an almost linear dependence on temperature of the interatomic bond lengths - with a relative variation of few percent over 300K -, alongside with a bond distance decrease of the Mg-H bonds. In order to increase the size of NPs toward experiments of hydrogen desorption from MgH$_2$ we devise a computationally effective Machine Learning model trained to accurately determine the forces and total energies (i.e. the potential energy surfaces), integrating the latter with the SSCHA model to fully include the anharmonic effects. We find a significative decrease of the H-desorption temperature for sub-nanometric clusters Mg$_n$H$_{2n}$ with $n \leq 10$, with a non-negligible, although little effect due to anharmonicities (up to 10%).

cond-mat.mtrl-sci↗

Experimental and numerical study of the effect of surface patterning on the frictional properties of polymer surfaces

We describe benchmark experiments to evaluate the frictional properties of laser patterned low-density polyethylene as a function of sliding velocity, normal force and humidity. The pattern is a square lattice of square cavities with sub-mm spacing. We find that dynamic friction decreases compared to non-patterned surfaces, since stress concentrations lead to anticipated detachment, and that stick-slip behavior is also affected. Friction increases with humidity, and the onset of stick-slip events occurs in the high humidity regime. Experimental results are compared with numerical simulations of a simplified 2-D spring-block model. A good qualitative agreement can be obtained by introducing a deviation from the linear behavior of the Amontons-Coulomb law with the load, due to a saturation in the effective contact area with pressure. This also leads also to the improvement of the quantitative results of the spring-block model by reducing the discrepancy with the experimental results, indicating the robustness of the adopted simplified approach, which could be adopted to design patterned surfaces with controlled friction properties.

cond-mat.soft↗

A combined experimental/numerical study on the scaling of impact strength and toughness in composite laminates for ballistic applications

In this paper, the impact behaviour of composite laminates is investigated, and their potential for ballistic protection assessed, as a function of the reinforcing materials and structures for three representative fibre-reinforced epoxy systems involving carbon, glass, or para-aramid fibre reinforcements, respectively. A multiscale coupled experimental/numerical study on the composite material properties is performed, starting from single fibre, to fibre bundles (yarns), to single composite ply, and finally at laminate level. Uniaxial tensile tests on single fibres and fibre bundles are performed, and the results are used as input for non-linear Finite Element Method (FEM) models for tensile and impact simulation on the composite laminates. Mechanical properties and energy dissipation of the single ply and multilayer laminates under quasi-static loading are preliminarily assessed starting from the mechanical properties of the constituents and subsequently verified numerically. FEM simulations of ballistic impact on multilayer armours are then performed, assessing the three different composites, showing good agreement with experimental tests in terms of impact energy absorption capabilities and deformation/failure behaviour. As result, a generalized multiscale version of the well-known Cuniff criterion is provided as a scaling law, which allows to assess the ballistic performance of laminated composites, starting from the tensile mechanical properties of the fibres and fibre bundles and their volume fraction. The presented multiscale coupled experimental-numerical characterization confirms the reliability of the predictions for full-scale laminate properties starting from the individual constituents at the single fibre scale.

physics.app-ph↗

Is it always worthwhile to resolve the governing equations of plate theories for graded porosity along the thickness?

Functionally graded porous (FGP) plates have been introduced as modern structural members which open a new window to optimal and functional designs. Despite the need to study the effect of graded porosity on the mechanical behavior of FGP plates, it is necessary to consider the very extensive and valuable literature in this field, presenting remarkable closed-form solutions. Hence, this paper aims to answer where is possible to implement the available exact solutions for the analysis of FGP plates. As the special distinction of FGP plates, graded porosity, is reflected in their stiffnesses and moments of inertia coefficients, 12 different functionality of porosity distribution along the thickness are considered and a set of explicit formulation for evaluating these coefficients are presented to be substituted in already provided analytical solutions. Many examples including bending and free vibration of thin and thick FGP plates are exhibited and the influence of the type of porosity distribution is discussed in details. This work can be considered as a guideline for designers to evaluate the effect of graded porosity based on the cornerstone of the huge number of solutions in the precious literature of plate theories.

cond-mat.mtrl-sci↗

Anisotropic Frictional Response of Texture Induced Strained Graphene

Friction-induced energy dissipation impedes the performance of nanoscale devices during their relative motion. Nevertheless, an ingeniously designed structure which utilizes graphene topping can tune the friction force signal by inducing local strain. The present work reports capping of graphene over Si grooved surfaces of different pitch lengths from sub-nanoscale (P=40 nm) to a quarter of a micron (P= 250 nm). The variation in the pitch lengths induces different strains in graphene revealed by scanning probe techniques, Raman spectroscopy and molecular dynamics (MD) simulation. The asymmetric straining of C-C bonds over the groove architecture is exploited through friction force microscopy in different directions of orthogonal and parallel to groove axis. The presence of graphene lubricates the textured surface by a factor of 10 and periodically dissipated friction force, which was found to be stochastic over the bare surface. For the first time, we presented transformation of the lubrication into an ultra-low friction force by a factor of 20 over the crest scanning parallel to the groove axis. Such anisotropy is found to be insignificant at the bare textured system, clearly demonstrating the strain-dependent regulation of friction force. Our results are applicable for graphene, and other 2D materials covered corrugated structures with movable components such as NEMS, nanoscale gears and robotics.

cond-mat.mtrl-sci↗

Electronic excitation spectra of cerium oxides: from ab initio dielectric response functions to Monte Carlo charge transport simulations

Nanomaterials made of the cerium oxides CeO$_2$ and Ce$_2$O$_3$ have a broad range of applications, from catalysts in automotive, industrial or energy operations to promising materials to enhance hadrontherapy effectiveness in oncological treatments. To elucidate the physico-chemical mechanisms involved in these processes, it is of paramount importance to know the electronic excitation spectra of these oxides, which are obtained here through high-accuracy linear-response time-dependent density functional theory calculations. In particular, the macroscopic dielectric response functions $\barε$ of both bulk CeO$_2$ and Ce$_2$O$_3$ are derived, which compare remarkably well with the available experimental data. These results stress the importance of appropriately accounting for local field effects to model the dielectric function of metal oxides. Furthermore, we reckon the materials energy loss functions $\mbox{Im} (-1/\barε)$, including the accurate evaluation of the momentum transfer dispersion from first-principles. In this respect, by using a Mermin-type parametrization we are able to model the contribution of different electronic excitations to the dielectric loss function. Finally, from the knowledge of the electron inelastic mean free path, together with the elastic mean free path provided by the relativistic Mott theory, we carry out statistical Monte Carlo (MC) charge transport simulations to reproduce the major features of the reported experimental reflection electron energy loss (REEL) spectra of cerium oxides. The good agreement with REEL experimental data strongly supports our approach based on MC modelling informed by ab initio calculated electronic excitation spectra in a broad range of momentum and energy transfers.

cond-mat.mtrl-sci↗

Controlling Movement at Nanoscale: Curvature Driven Mechanotaxis

Locating and manipulating nano-sized objects to drive motion is a time and effort consuming task. Recent advances show that it is possible to generate motion without direct intervention, by embedding the source of motion in the system configuration. In this work, we demonstrate an alternative manner to controllably displace nano-objects without external manipulation, by employing spiral-shaped carbon nanotube (CNT) and graphene nanoribbon structures (GNR). The spiral shape contains smooth gradients of curvature, which lead to smooth gradients of bending energy. We show these gradients can drive nanoscillators. We also carry out an energy analysis by approximating the carbon nanotube to a thin rod and discuss how torsional gradients can be used to drive motion. For the nanoribbons, we also analyzed the role of layer orientation. Our results show that motion is not sustainable for commensurate orientations, in which AB stacking occurs. For incommensurate orientations, friction almost vanishes, and in this instance, the motion can continue even if the driving forces are not very high. This suggests that mild curvature gradients, which can already be found in existing nanostructures, could provide mechanical stimuli to direct motion.

cond-mat.mes-hall↗

Bioinspired Nanocomposites: 2D Materials Within a 3D Lattice

Advanced composites are used in a variety of industrial applications and therefore attract much scientific interest. Here we describe the formation of novel carbon-based nanocomposites via incorporation of graphene oxide into the crystal lattice of single crystals of calcite. Incorporation of a 2D organic material into single-crystal lattices has never before been reported. To characterize the resulting nanocomposites we employed high-resolution synchrotron powder X-ray diffraction, electron microscopy, transmission electron microscopy, fluorescence microscopy, and nanoindentation tests. Detailed analysis revealed a layered distribution of graphene oxide sheets incorporated within the calcite host. Moreover, the optical and mechanical properties of the calcite host were altered when a carbon-based nanomaterial was introduced into its lattice. Compared to pure calcite, the composite GO-calcite crystals exhibited lower elastic modulus and higher hardness. The results of this study show that the incorporation of a 2D material within a 3D crystal lattice is not only feasible but also can lead to the formation of hybrid crystals exhibiting new properties.

physics.app-ph↗

A Comparison between Monte Carlo Method and the Numerical Solution of the Ambartsumian-Chandrasekhar Equations to Unravel the Dielectric Response of Metals

In this work we describe two different models for interpreting and predicting Reflection Electron Energy Loss (REEL) spectra and we present results of a study on metallic systems comparing the computational cost and the accuracy of these techniques. These approaches are the Monte Carlo (MC) method and the Numerical Solution (NS) of the Ambartsumian-Chandrasekhr equations. The former is based on a statistical algorithm to sample the electron trajectories within the target material for describing the electron transport. The latter relies on the numerical solution of the Ambartsumian-Chandrasekhar equations using the invariant embedding method. Both methods receive the same input parameters to deal with the elastic and inelastic electron scattering. To test their respective capability to describe REEL experimental spectra, we use copper, silver, and gold as case studies. Our simulations include both bulk and surface plasmon contributions to the energy loss spectrum by using the effective electron energy loss functions and the relevant extensions to finite momenta. The agreement between MC and NS theoretical spectra with experimental data is remarkably good. Nevertheless, while we find that these approaches are comparable in accuracy, the computational cost of NS is several orders of magnitude lower than the widely used MC. Inputs, routines and data are enclosed with this manuscript via the Mendeley database.

cond-mat.mtrl-sci↗

Exploring Event Horizons and Hawking Radiation through Deformed Graphene Membranes

Analogue gravitational systems are becoming an increasing popular way of studying the behaviour of quantum systems in curved spacetime. Setups based on ultracold quantum gases in particular, have been recently harnessed to explore the thermal nature of Hawking's and Unruh's radiation that was theoretically predicted almost 50 years ago. For solid state implementations, a promising system is graphene, in which a link between the Dirac-like low-energy electronic excitations and relativistic quantum field theories has been unveiled soon after its discovery. Here we show that this link extends to the case of curved quantum field theory when the graphene sheet is shaped in a surface of constant negative curvature, known as Beltrami's pseudosphere. Thanks to large-scale simulations, we provide numerical evidence that energetically stable negative curvature graphene surfaces can be realized; the ratio between the carbon-carbon bond length and the pseudosphere radius is small enough to allow the formation of an horizon; and the associated Local Density Of States evaluated at horizon's proximity has a thermal nature with a characteristic temperature of few tens of Kelvin. Such findings pave the way to the realization of a solid-state system in which the curved spacetime dynamics of quantum many body systems can be investigated.

cond-mat.mes-hall↗

A numerical model for the peeling of elastic membranes

The adhesive behaviour of biological attachment structures such as spider web anchorages is usually studied using single or multiple peeling models involving "tapes", i.e. one-dimensional contacts elements. This is an oversimplification for many practical problems, since the actual delamination process requires the modelling of complex two-dimensional adhesive elements. To achieve this, we develop a numerical approach to simulate the detachment of an elastic membrane of finite size from a substrate, using a 3D cohesive law. The model is validated using existing analytical results for simple geometries, and then applied in a series of parametric studies. Results show how the pull-off force can be tuned or optimized by varying different geometrical or mechanical parameters in various loading scenarios, and the length of the detachment boundary, known as the peeling line, emerges as the key factor to maximize adhesion. The approach presented here can allow a better understanding of the mechanical behaviour of biological adhesives with complex geometries or with material anisotropies, highlighting the interaction between the stress distributions at the interface and in the membrane itself.

physics.comp-ph↗

Competition between delamination and fracture in multiple peeling problems

Adhesive attachment systems consisting of multiple tapes or strands are commonly found in nature, for example in spider web anchorages or in mussel byssal threads, and their structure has been found to be ingeniously architected in order to optimize mechanical properties, in particular to maximize dissipated energy before full detachment. These properties emerge from the complex interplay between mechanical and geometric parameters, including tape stiffness, adhesive energy, attached and detached lengths and peeling angles, which determine the occurrence of three main mechanisms: elastic deformation, interface delamination and tape fracture. In this paper, we introduce a formalism to evaluate the mechanical performance of multiple tape attachments in different parameter ranges, allowing to predict the corresponding detachment behaviour. We also introduce a numerical model to simulate the complex multiple peeling behaviour of complex structures, illustrating its predictions in the case of the staple-pin architecture. We expect the presented formalism and numerical model to provide important tools for the design of bioinspired adhesive systems with tunable or optimized detachment properties.

physics.class-ph↗

Structural, Electronic and Mechanical properties of all-sp$^2$ graphene allotropes: the specific strength of tilene parent is higher than that of graphene and flakene has the minimal density

In this work a systematic approach to the search for all-$sp^2$ bonded carbon allotropes with low density is presented. In particular, we obtain a number of novel energetically stable crystal structures, whose arrangement is closely related to the topology of graphene, by modifying the packing of congruent discs under the condition of local stability. Our procedure starts from an initial parent topology and proceeds to generate daughter architectures derived by lowering the packing factors. Furthermore, we assess both the electronic properties, such as the band structure and the density of states, and the mechanical properties, such as the elastic constants and the stress--strain characteristics, of parent's and daughter's geometries from first-principle simulations. We find, using geometrical packing arguments, that some arrangements lead to a density as low as half that of graphene, obtaining some of the least dense structures of all-$sp^2$ bonded carbon allotropes that could ever be synthesized. Nevertheless, a threshold value of the density exists below which the mechanical rigidity of graphene is irreparably lost, while keeping other mechanical characteristics, such as the specific toughness and strength, almost unchanged with lower weight.

cond-mat.mtrl-sci↗

A frequency-preserving and time-invariant metamaterial-based nonlinear acoustic diode

We present the realization of an acoustic diode or rectifier, exploiting symmetry-breaking nonlinear effects like harmonic generation and wave mixing and the filtering capabilities of metamaterials. The essential difference and advantage compared with previous acoustic diode realizations is that the present is simultaneously a time invariant, frequency preserving and switchable device. This allows its application also as an on-off or amplitude-tuning switch. We evaluate its properties by means of a numerical study and demonstrate its feasibility in a preliminary experimental realization. This work may provide new opportunities for the practical realization of structural components with one-way wave propagation properties.

physics.app-ph↗

Secondary electron emission and yield spectra of metals from Monte Carlo simulations and experiments

In this work, we present a computational method, based on the Monte Carlo statistical approach, for calculating electron energy emission and yield spectra of metals, such as copper, silver and gold. The calculation of these observables proceeds via the Mott theory to deal with the elastic scattering processes, and by using the Ritchie dielectric approach to model the electron inelastic scattering events. In the latter case, the dielectric function, which represents the starting point for the evaluation of the energy loss, is obtained from experimental reflection electron energy loss spectra. The generation of secondary electrons upon ionization of the samples is also implemented in the calculation. A remarkable agreement is obtained between both theoretical and experimental electron emission spectra and yield curves.

cond-mat.mtrl-sci↗

Emergence of the interplay between hierarchy and contact splitting in biological adhesion highlighted through a hierarchical shear lag model

Contact unit size reduction is a widely studied mechanism as a means to improve adhesion in natural fibrillar systems, such as those observed in beetles or geckos. However, these animals also display complex structural features in the way the contact is subdivided in a hierarchical manner. Here, we study the influence of hierarchical fibrillar architectures on the load distribution over the contact elements of the adhesive system, and the corresponding delamination behaviour. We present an analytical model to derive the load distribution in a fibrillar system, including hierarchical splitting of contacts, i.e. a "hierarchical shear-lag" model that generalizes the well-known shear-lag model used in mechanics. The influence on the detachment process is investigated introducing a numerical procedure that allows the derivation of the maximum delamination force as a function of the considered geometry, including statistical variability of local adhesive energy. Our study suggests that contact splitting generates improved adhesion only in the ideal case of infinitely compliant contacts. In real cases, to produce efficient adhesive performance, contact splitting needs to be coupled with hierarchical architectures to counterbalance high load concentrations resulting from contact unit size reduction, generating multiple delamination fronts and helping to avoid detrimental non-uniform load distributions. We show that these results can be summarized in a generalized adhesion scaling scheme for hierarchical structures, proving the beneficial effect of multiple hierarchical levels. The model can thus be used to predict the adhesive performance of hierarchical adhesive structures, as well as the mechanical behaviour of composite materials with hierarchical reinforcements.

cond-mat.soft↗

Accordion-like metamaterials with tunable ultra-wide low-frequency band gaps

We study lightweight, elastic metamaterials consisting of tensegrity-inspired prisms, which present wide, low-frequency band gaps. For their realization, we alternate tensegrity elements with solid discs in periodic arrangements that we call "accordion-like" meta-structures. We show through analytical calculations and numerical simulations that these structures are characterized by low-frequency band gaps with strong uniform wave attenuation due to the coupling of Bragg scattering and local resonance mechanisms. This coupling helps to overcome the inherent limit of a narrow band-gap width for conventional locally-resonant metamaterials and to extend the wave attenuation to wider frequency ranges. Moreover, the band gaps can be further increased, provided a minimum structural damping is present, and tuned to desired frequencies by changing the applied prestress levels in the tensegrity structure. Results are corroborated by parametric studies showing that the band-gap frequencies are preserved for wide variations of geometric and material structural properties.

physics.app-ph↗

Tuning frequency band gaps of tensegrity metamaterials with local and global prestress

This work studies the acoustic band structure of tensegrity metamaterials, and the possibility to tune the dispersion relation of such systems by playing with local and global prestress variables. Building on established results of the Bloch-Floquet theory, the paper first investigates the linearized response of chains composed of tensegrity units and lumped masses, which undergo small oscillations around an initial equilibrium state. The stiffness of the units in such a state varies with an internal self-stress induced by prestretching the cables forming the tensegrity units, and the global prestress induced by the application of compression forces to the terminal bases. The given results show that frequency band gaps of monoatomic and biatomic chains can be effectively altered by the fine tuning of local and global prestress parameters, while keeping material properties unchanged. Numerical results on the wave dynamics of chains under moderately large displacements confirm the presence of frequency band gaps of the examined systems in the elastically hardening regime. Novel engineering uses of the examined metamaterials are discussed.

nlin.PS↗