Searcharxiv⌕ Search

arXiv subjects

Nikunjkumar Prajapati

Publications and source records attributed to Nikunjkumar Prajapati.

At least 37 records · Page 2Linked to original sources
arXiv2024

Multichannel, ultra-wideband Rydberg Electrometry with an Optical Frequency Comb

While Rydberg atoms have shown tremendous potential to serve as accurate and sensitive detectors of microwaves and millimeter waves, their response is generally limited to a single narrow frequency band around a chosen microwave transition. As a result, their potential to serve as agile and wideband electromagnetic receivers has not been fully realized. Here we demonstrate the use of a mid-infrared, frequency agile optical frequency comb as the coupling laser for three-photon Rydberg atom electrometry. This approach allows us to simultaneously prepare as many as seven individual Rydberg states, allowing for multichannel detection across a frequency range from 1 GHz to 40 GHz. The generality and flexibility of this method for wideband multiplexing is anticipated to have transformative effects in the field of Rydberg electrometry, paving the way for advanced information coding and arbitrary signal detection.

physics.atom-ph↗
arXiv2024

Revisiting collisional broadening of $^{85}$Rb Rydberg levels: conclusions for vapor cell manufacture

Electrometry based on electromagnetically induced transparency (EIT) in alkali Rydberg vapor cells may suffer reduced sensitivity due to spurious line broadening effects, caused by surface charges, contaminant gases, or other manufacturing defects. In order to draw conclusions about the deleterious effects of potential contaminant gases inside Rydberg electrometry vapor cells, we revisit collisional broadening and shifts of both the D$_2$ line and Rydberg levels of rubidium. Specifically, we measure the broadening and shifts of the $5{\rm S}_{1/2}\rightarrow 5{\rm P}_{3/2}$ (i.e., the D$_2$ line) and $5{\rm S}_{1/2}\rightarrow 5{\rm P}_{3/2}\rightarrow (25{\rm D},27{\rm S},30{\rm D},32{\rm S},35{\rm D},37{\rm S})$ transitions of $^{85}$Rb due to He, Ne, N$_2$ and Ar. By combining these measurements with observations of velocity changing collisions in the sub-Doppler spectrum of the D$_2$ line, we conclude the following: (1) that contaminant gases are most likely not the cause of irregular line shapes or shifts of Rydberg transitions due to the high pressures required, and (2) the sub-Doppler spectrum of the D$_2$ line, through its accompanying loss of contrast at high pressures, can validate that a vapor cell is sufficiently free of contaminant gas for EIT electrometry. We use the theory of Omont, J. Phys. France 38, 1343 (1977), to extend our results to a wide variety of possible contaminant gases and further derive scaling laws applicable to all gases.

physics.atom-ph↗
arXiv2024

Observation of Asymmetric Sideband Generation in Strongly-driven Rydberg Atoms

Improving the bandwidth of Rydberg atom-based receivers is an ongoing challenge owing to the long-lived Rydberg state lifetimes that limit the refresh rate of ground state atoms. In particular, the LO-based Rydberg mixer approach allows for bandwidths into the few-MHz range. Here, we use heterodyne detection of the Rydberg atom receiver probe laser to separate the negative and positive sidebands that originate from distinct six wave mixing processes, in order to investigate their individual bandwidths. We experimentally confirm the prediction that the negative sideband exhibits a higher bandwidth than the positive sideband. We further explore the effect of coupling and probe laser Rabi frequency on the bandwidth, which we find to be in good agreement with our model. We achieved a maximum experimental (and theoretical) bandwidth of about 11 (11) MHz and 3.5 (5) MHz for the negative and positive sidebands, respectively, from the -3dB roll-off point for optimized field parameters. This work provides insight into the bandwidth-limiting features of Rydberg atom receivers and points the way towards further optimization of their response.

physics.atom-ph↗
arXiv2024

Independent Rydberg Atom Sensing using a Dual-Ladder Scheme

Rydberg atom-based electric field sensing can provide all-optical readout of radio frequency fields in a dielectric environment. However, because a single set of optical fields is typically used to prepare the Rydberg state and read out its response to RF fields, it is challenging to perform simultaneous and independent measurements of the RF field(s). Here we show that using two independent schemes to prepare and read out the same Rydberg state can be used to perform independent measurements in general, which we demonstrate specifically by resolving the the RF polarization. We expect this work will be useful for fiber-coupled sensor heads where spatial multiplexing is challenging, as well as for complex multi-level sensing schemes.

physics.atom-ph↗
arXiv2024

Investigation of fluorescence versus transmission readout for three-photon Rydberg excitation used in electrometry

We present a three-photon based fluorescence readout method where the strength of the fluorescence scales with the strength of the radio-frequency (RF) field being applied. We compare this method to conventional three-photon electromagnetically-induced transparency (EIT) and electromagnetically-induced absorption (EIA). Our demonstrated EIA/EIT sensitivity in the collinear three-photon Cesium system is the best reported to date at roughly 30 uVm^{-1}Hz^{-1/2}. The fluorescence is nearly 4 fold better in sensitivity compared to EIA/EIT readout.

quant-ph↗
arXiv2023

Zeeman-resolved Autler-Townes splitting in Rydberg atoms with tunable resonances and a single transition dipole moment

Applying a magnetic field as a method for tuning the frequency of Autler-Townes splitting for Rydberg electrometry has recently been demonstrated. In this paper we provide a theoretical understanding of EIT signals in the presence of a large magnetic field, as well as demonstrate some advantages of this technique over traditional Autler-Townes based electrometry. We show that a strong magnetic field provides a well-defined quantization axis regardless of the optical field polarizations, we demonstrate that by separating the $m_J$ levels of the Rydberg state we can perform an Autler-Townes splitting with a single participating dipole moment, and we demonstrate recovery of signal strength by populating a single $m_J$ level using circularly polarized light.

physics.atom-ph↗
arXiv2023

High angular momentum coupling for enhanced Rydberg-atom sensing in the VHF band

Recent advances in Rydberg atom electrometry detail promising applications in radio frequency (RF) communications. Presently, most applications use carrier frequencies greater than 1~GHz where resonant Autler-Townes splitting provides the highest sensitivity. This letter documents a series of experiments with Rydberg atomic sensors to collect and process waveforms from the automated identification system (AIS) used in maritime navigation in the Very High Frequency (VHF) band. Detection in this band is difficult with conventional resonant Autler-Townes based Rydberg sensing and requires a new approach. We show the results from a new method called High Angular Momentum Matching Excited Raman (HAMMER), which enhances low frequency detection and exhibits superior sensitivity compared to the traditional AC Stark effect. From measurements of electromagnetically induced transparency (EIT) in rubidium and cesium vapor cells, we show the relationship between incident electric field strength and observed signal-to-noise ratio and find that the sensitivity of the HAMMER scheme in rubidium achieved an equivalent single VHF tone sensitivity of $\mathrm{100~μV/m/\sqrt{Hz}}$. With these results, we estimate the usable range of the atomic vapor cell antenna for AIS waveforms given current technology and detection techniques.

physics.atom-ph↗
arXiv2023

Phase-Resolved Rydberg Atom Field Sensing using Quantum Interferometry

Although Rydberg atom-based electric field sensing provides key advantages over traditional antenna-based detection, it remains limited by the need for a local oscillator (LO) for low-field and phase resolved detection. In this work, we demonstrate that closed-loop quantum interferometric schemes can be used to generate a system-internal reference that can directly replace an external LO for Rydberg field sensing. We reveal that this quantum-interferometrically defined internal reference phase and frequency can be used analogously to a traditional LO for atom-based down-mixing to an intermediate frequency for lock-in phase detection. We demonstrate that this LO-equivalent functionality provides analogous benefits to an LO, including full 360$^\circ$ phase resolution as well as improved sensitivity. The general applicability of this approach is confirmed by demodulating a four phase-state signal broadcast on the atoms. Our approach opens up new sensing schemes and provides a clear path towards all-optical Rydberg atom sensing implementations.

physics.atom-ph↗
arXiv2023

EIT spectra of Rydberg atoms dressed with dual-tone radio-frequency fields

We examine spectral signatures of Rydberg atoms driven with near-resonant dual-tone radio-frequency (RF) fields in the regime of strong driving. We experimentally demonstrate and theoretically model a variety of nonlinear and multiphoton phenomena in the atomic Rydberg response that manifest in the EIT spectra. Our results echo previous studies of two-level atoms driven with bichromatic optical fields. In comparison to the optical studies, the RF-driven Rydberg system utilizes a more complex excitation pathway, and electromagnetic fields from two different spectral regimes: a two-photon optical excitation continuously creates highly excited Rydberg atoms, while RF fields drive resonant coupling between the Rydberg levels and generate strong mixing. Yet, our spectra reflect nearly identical effects of the dual-tone RF fields on the atomic Rydberg observables, showing detuning-dependent splittings and Rabi frequency dependent peak numbers and relative strengths, and avoided crossings at subharmonic resonances. We thus validate previous two-state models in this more complex physical system. In the context of Rydberg electrometry, we use these investigations to explore a technique where we tune a known RF field to observe spectra which give frequency and power of an unknown RF field using the complex dual-tone spectra.

physics.atom-ph↗
arXiv2023

Inverse Transform Sampling for Efficient Doppler-Averaged Spectroscopy Simulations

We present a thermal velocity sampling method for calculating Doppler-broadened atomic spectra, which more efficiently reaches a smooth limit than regular velocity weighted sampling. The method uses equal-population sampling of the 1-D thermal distribution, sampling the 'inverse transform' of the cumulative distribution function, and is broadly applicable to normal distributions. We also discuss efficiencies from eliminating velocity classes which don't significantly contribute to observed atomic lines, and comment on the application of this method in 2- and 3-dimensions.

physics.atom-ph↗
arXiv2023

Detection of HF and VHF Fields through Floquet Sideband Gaps by `Rabi Matching' Dressed Rydberg Atoms

Radio frequencies in the HF and VHF (3 MHz to 300 MHz) bands are challenging for Rydberg atom-based detection schemes, as resonant detection requires exciting the atoms to extremely high energy states. We demonstrate a method for detecting and measuring radio frequency (RF) carriers in the HF and VHF bands via a controlled Autler-Townes line splitting. Using a resonant, high-frequency (GHz) RF field, the absorption signal from Townes-Merrit sidebands created by a low frequency, non-resonant RF field can be enhanced. Notably, this technique uses a measurement of the optical frequency separation of an avoided crossing to determine the amplitude of a non-resonant, low frequency RF field. This technique also provides frequency-selective measurements of low frequency RF electric fields. To show this, we demonstrate amplitude modulated signal transduction on a low frequency VHF carrier. We further demonstrate reception of multiple tones simultaneously, creating a Rydberg `spectrum analyzer' over the VHF range.

physics.atom-ph↗
arXiv2022

Sensitivity Comparison of Two-photon vs Three-photon Rydberg Electrometry

We investigate the sensitivity of three-photon EIT in Rydberg atoms to radio frequency detection and compare it against conventional two-photon systems. Specifically, we model the 4-level and 5-level atomic system and compare how the transmission of the probe changes with different powers of the lasers used and strengths of the RF field. In this model, we also define a sensitivity metric to best relate to the operation of the current best experimental implementation based on shot noise limited detection. We find that the three-photon system boasts much narrower line widths compared to the conventional two-photon EIT. However, these narrow line features do not align with the regions of the best sensitivity. In addition to this, we calculate the expected sensitivity for the two-photon Rydberg sensor and find that the best achievable sensitivity is over an order of magnitude better than the current measured values of 5 uV/m/Hz. However, by accounting for the additional noise sources in the experiment and the quantum efficiency of the photo-detectors, the values are in good agreement.

physics.atom-ph↗
arXiv2022

Rydberg state engineering: A comparison of tuning schemes for continuous frequency sensing

On-resonance Rydberg atom-based radio-frequency (RF) electric field sensing methods remain limited by the narrow frequency signal detection bands available by resonant transitions. The use of an additional RF tuner field to dress or shift a target Rydberg state can be used to return a detuned signal field to resonance and thus dramatically extend the frequency range available for resonant sensing. Here we investigate three distinct tuning level schemes based on adjacent Rydberg transitions, which are shown to have distinct characteristics and can be controlled with mechanisms based on the tuning field frequency or field strength. We further show that a two-photon Raman feature can be used as an effective tuning mechanism separate from conventional Autler-Townes splitting. We compare our tuning schemes to AC Stark effect-based broadband RF field sensing and show that although the sensitivity is diminished as we tune away from a resonant state, it nevertheless can be used in configurations where there is a low density of Rydberg states, which would result in a weak AC Stark effect.

physics.atom-ph↗
arXiv2022

TV and Video Game Streaming with a Quantum Receiver: A Study on a Rydberg atom-based receivers bandwidth and reception clarity

We demonstrate the ability to receive live color analog television and video game signals with the use of the Rydberg atom receiver. The typical signal expected for traditional 480i NSTC format video signals requires a bandwidth of over 3 MHz. We determine the beam sizes, powers, and detection method required for the Rydberg atoms to receive this type of signal. The beam size affects the average time the atoms remain in the interaction volume, which is inversely proportional to the bandwidth of the receiver. We find that small beam diameters (less than 100 μm) lead to much faster responses and allow for color reception. We demonstrate the effect of beam size on bandwidth by receiving a live 480i video stream with the Rydberg atom receiver. The best fidelity was achieved with a beam width of 85 μm full-width at half-max.

quant-ph↗
arXiv2022

Rydberg atom-based field sensing enhancement using a split-ring resonator

We investigate the use of a split-ring resonator (SRR) incorporated with an atomic-vapor cell to improve the sensitivity and the minimal detectable electric (E) field of Rydberg atom-based sensors. In this approach, a sub-wavelength SRR is placed around an atomic vapor-cell filled with cesium atoms for E-field measurements at 1.3~GHz. The SRR provides a factor of 100 in the enhancement of the E-field measurement sensitivity. Using electromagnetically induced transparency (EIT) with Aulter-Townes splitting, E-field measurements down to 5~mV/m are demonstrated with the SRR, while in the absence of the SRR, the minimal detectable field is 500~mV/m. We demonstrate that by combining EIT with a heterodyne Rydberg atom-based mixer approach, the SRR allows for the a sensitivity of 5.5~$μ$V/m$\sqrt{\rm Hz}$, which is two-orders of magnitude improvement in sensitivity than when the SRR is not used.

physics.atom-ph↗
arXiv2021

Electromagnetically induced transparency based Rydberg-atom sensor for quantum voltage measurements

We investigate the Stark shift in Rydberg rubidium atoms through electromagnetically induced transparency for the measurement of direct current (dc) and 60~Hz alternating current (ac) voltages. This technique has direct applications to atom-based measurements of dc and ac voltage and the calibration of voltage instrumentation. We present experimental results for different atomic states that allow for dc and ac voltage measurements ranging from 0~V to 12~V. A Rydberg atom-based voltage standard could become an alternative calibration method with more favorable size, weight, power consumption, and cost compared to the more precise Josephson voltage standard. In this study, we also demonstrate how the voltage measurements can be utilized to determine the atomic polarizability for the Rydberg states. The Rydberg atom-based voltage measurement technology would become a complimentary method for dissemination of the voltage scale directly to the end user.

physics.atom-ph↗
arXiv2021

Low-Light Shadow Imaging using Quantum-Noise Detection with a Camera

We experimentally demonstrate an imaging technique based on quantum noise modification after interaction with an opaque object. By using a homodyne-like detection scheme, we eliminate the detrimental effect of the camera's dark noise, making this approach particularly attractive for imaging scenarios that require weak illumination. Here, we reconstruct the image of an object illuminated with a squeezed vacuum using a total of 800 photons, utilizing less than one photon per frame on average.

quant-ph↗