arXiv subjects

Nuria González-Prelcic

Publications and source records attributed to Nuria González-Prelcic.

At least 37 records · Page 2Linked to original sources

arXiv2022

Hybrid mmWave MIMO Systems under Hardware Impairments and Beam Squint: Channel Model and Dictionary Learning-aided Configuration

Low overhead channel estimation based on compressive sensing (CS) has been widely investigated for hybrid wideband millimeter wave (mmWave) multiple-input multiple-output (MIMO) systems. The channel sparsifying dictionaries used in prior work are built from ideal array response vectors evaluated on discrete angles of arrival/departure. In addition, these dictionaries are assumed to be the same for all subcarriers, without considering the impacts of hardware impairments and beam squint. In this manuscript, we derive a general channel and signal model that explicitly incorporates the impacts of hardware impairments, practical pulse shaping functions, and beam squint, overcoming the limitations of mmWave MIMO channel and signal models commonly used in previous work. Then, we propose a dictionary learning (DL) algorithm to obtain the sparsifying dictionaries embedding hardware impairments, by considering the effect of beam squint without introducing it into the learning process. We also design a novel CS channel estimation algorithm under beam squint and hardware impairments, where the channel structures at different subcarriers are exploited to enable channel parameter estimation with low complexity and high accuracy. Numerical results demonstrate the effectiveness of the proposed DL and channel estimation strategy when applied to realistic mmWave channels.

eess.SP↗

arXiv2022

Multidimensional orthogonal matching pursuit: theory and application to high accuracy joint localization and communication at mmWave

Greedy approaches in general, and orthogonal matching pursuit in particular, are the most commonly used sparse recovery techniques in a wide range of applications. The complexity of these approaches is highly dependent on the size of the dictionary chosen to represent the sparse signal. When the dictionary has to be large to enable high accuracy reconstructions, greedy strategies might however incur in prohibitive complexity. In this paper, we propose first the formulation of a new type of sparse recovery problems where the sparse signal is represented by a set of independent and smaller dictionaries instead of a large single one. Then, we derive a low complexity multdimensional orthogonal matching pursuit (MOMP) strategy for sparse recovery with a multdimensional dictionary. The projection step is performed iteratively on every dimension of the dictionary while fixing all other dimensions to achieve high accuracy estimation at a reasonable complexity. Finally, we formulate the problem of high resolution time domain channel estimation at millimeter wave (mmWave) frequencies as a multidimensional sparse recovery problem that can be solved with MOMP. The channel estimates are later transformed into high accuracy user position estimates exploiting a new localization algorithm that leverages the particular geometry of indoor channels. Simulation results show the effectiveness of MOMP for high accuracy localization at millimeter wave frequencies when operating in realistic 3D scenarios, with practical MIMO architectures feasible at mmWave, and without resorting to perfect synchronization assumptions that simplify the problem.

eess.SP↗

arXiv2022

Low complexity joint position and channel estimation at millimeter wave based on multidimensional orthogonal matching pursuit

Compressive approaches provide a means of effective channel high resolution channel estimates in millimeter wave MIMO systems, despite the use of analog and hybrid architectures. Such estimates can also be used as part of a joint channel estimation and localization solution. Achieving good localization performance, though, requires high resolution channel estimates and better methods to exploit those channels. In this paper, we propose a low complexity multidimensional orthogonal matching pursuit strategy for compressive channel estimation based by operating with a product of independent dictionaries for the angular and delay domains, instead of a global large dictionary. This leads to higher quality channel estimates but with lower complexity than generalizations of conventional solutions. We couple this new algorithm with a novel localization formulation that does not rely on the absolute time of arrival of the LoS path and exploits the structure of reflections in indoor channels. We show how the new approach is able to operate in realistic 3D scenarios to estimate the communication channel and locate devices in an indoor simulation setting.

eess.SP↗

arXiv2022

Joint Initial Access and Localization in Millimeter Wave Vehicular Networks: a Hybrid Model/Data Driven Approach

High resolution compressive channel estimation provides information for vehicle localization when a hybrid mmWave MIMO system is considered. Complexity and memory requirements can, however, become a bottleneck when high accuracy localization is required. An additional challenge is the need of path order information to apply the appropriate geometric relationships between the channel path parameters and the vehicle, RSU and scatterers position. In this paper, we propose a low complexity channel estimation strategy of the angle of departure and time difference of arrival based on multidimensional orthogonal matching pursuit. We also design a deep neural network that predicts the order of the channel paths so only the LoS and first order reflections are used for localization. Simulation results obtained with realistic vehicular channels generated by ray tracing show that sub-meter accuracy can be achieved for 50% of the users, without resorting to perfect synchronization assumptions or unfeasible all-digital high resolution MIMO architectures.

eess.SP↗

arXiv2022

Multidimensional Orthogonal Matching Pursuit-based RIS-aided Joint Localization and Channel Estimation at mmWave

RIS-aided millimeter wave wireless systems benefit from robustness to blockage and enhanced coverage. In this paper, we study the ability of RIS to also provide enhanced localization capabilities as a by-product of communication. We consider sparse reconstruction algorithms to obtain high resolution channel estimates that are mapped to position information. In RIS-aided mmWave systems, the complexity of sparse recovery becomes a bottleneck, given the large number of elements of the RIS and the large communication arrays. We propose to exploit a multidimensional orthogonal matching pursuit strategy for compressive channel estimation in a RIS-aided millimeter wave system. We show how this algorithm, based on computing the projections on a set of independent dictionaries instead of a single large dictionary, enables high accuracy channel estimation at reduced complexity. We also combine this strategy with a localization approach which does not rely on the absolute time of arrival of the LoS path. Localization results in a realistic 3D indoor scenario show that RIS-aided wireless system can also benefit from a significant improvement in localization accuracy.

eess.SP↗

arXiv2022

Deep Learning-based Link Configuration for Radar-aided Multiuser mmWave Vehicle-to-Infrastructure Communication

Configuring millimeter wave links following a conventional beam training protocol, as the one proposed in the current cellular standard, introduces a large communication overhead, specially relevant in vehicular systems, where the channels are highly dynamic. In this paper, we propose the use of a passive radar array to sense automotive radar transmissions coming from multiple vehicles on the road, and a radar processing chain that provides information about a reduced set of candidate beams for the links between the road-infrastructure and each one of the vehicles. This prior information can be later leveraged by the beam training protocol to significantly reduce overhead. The radar processing chain estimates both the timing and chirp rates of the radar signals, isolates the individual signals by filtering out interfering radar chirps, and estimates the spatial covariance of each individual radar transmission. Then, a deep network is used to translate features of these radar spatial covariances into features of the communication spatial covariances, by learning the intricate mapping between radar and communication channels, in both line-of-sight and non-line-of-sight settings. The communication rates and outage probabilities of this approach are compared against exhaustive search and pure radar-aided beam training methods (without deep learning-based mapping), and evaluated on multi-user channels simulated by ray tracing. Results show that: (i) the proposed processing chain can reliably isolate the spatial covariances for individual radars, and (ii) the radar-to-communications translation strategy based on deep learning provides a significant improvement over pure radar-aided methods in both LOS and NLOS channels.

eess.SP↗

arXiv2021

Radar Aided mmWave Vehicle-to-InfrastructureLink Configuration Using Deep Learning

The high overhead of the beam training process is the main challenge when establishing mmWave communication links, especially for vehicle-to-everything (V2X) scenarios where the channels are highly dynamic. In this paper, we obtain prior information to speed up the beam training process by implementing two deep neural networks (DNNs) that realize radar-to-communication (R2C) channel information translation in a vehicle-to-infrastructure (V2I) system. Specifically, the first DNN is built to extract the information from the radar azimuth power spectrum (APS) to reconstruct the communication APS, while the second DNN exploits the information extracted from the spatial covariance of the radar channel to realize R2C covariance prediction. The achieved data rate and the similarity between the estimated and the true communication APS are used to evaluate the prediction performance. The covariance estimation method generally provides higher similarity, as the APS predictions cannot always capture the mismatch between the radar and communication APS. Compared to the beam training method which exploits directly the radar APS without an attempt to translate it to the communication channel, our proposed deep learning (DL) aided methods remarkably reduce the beam training overhead, resulting in a 13.3% and 21.9% rate increase when using the communication APS prediction and covariance prediction, respectively.

eess.SP↗

arXiv2021

A Dynamic Codebook Design for Analog Beamforming in MIMO LEO Satellite Communications

Beamforming gain is a key ingredient in the performance of LEO satellite communication systems to be integrated into cellular networks. However, beam codebooks previously designed in the context of MIMO communication for terrestrial networks, do not provide the appropriate performance in terms of inter-beam interference and gain stability as the satellite moves. In this paper, we propose a dynamic codebook that provides a stable gain during the period of time that the satellite covers a given cell, while avoiding link retraining and extra calculation as the satellite moves. In addition, the proposed codebook provides a higher signal-to-interference-plus-noise (SINR) ratio than those DFT codebooks commonly used in cellular systems.

eess.SP↗

arXiv2021

Beamformer Design and Optimization for Full-Duplex Joint Communication and Sensing at mm-Waves

In this article, we study the joint communication and sensing (JCAS) paradigm in the context of millimeter-wave (mm-wave) mobile communication networks. We specifically address the JCAS challenges stemming from the full-duplex operation and from the co-existence of multiple simultaneous beams for communications and sensing purposes. To this end, we first formulate and solve beamforming optimization problems for hybrid beamforming based multiuser multiple-input and multiple-output JCAS systems. The cost function to be maximized is the beamformed power at the sensing direction while constraining the beamformed power at the communications directions, suppressing interuser interference and cancelling full-duplexing related self-interference (SI). We then also propose new transmitter and receiver beamforming solutions for purely analog beamforming based JCAS systems that maximize the beamforming gain at the sensing direction while controlling the beamformed power at the communications direction(s), cancelling the SI as well as eliminating the potential reflection from the communication direction and optimizing the combined radar pattern (CRP). Both closed-form and numerical optimization based formulations are provided. We analyze and evaluate the performance through extensive simulations, and show that substantial gains and benefits in terms of radar transmit gain, CRP, and SI suppression can be achieved with the proposed beamforming methods.

eess.SP↗

arXiv2021

Deep Learning-based Compressive Beam Alignment in mmWave Vehicular Systems

Millimeter wave vehicular channels exhibit structure that can be exploited for beam alignment with fewer channel measurements compared to exhaustive beam search. With fixed layouts of roadside buildings and regular vehicular moving trajectory, the dominant path directions of channels will likely be among a subset of beam directions instead of distributing randomly over the whole beamspace. In this paper, we propose a deep learning-based technique to design a structured compressed sensing (CS) matrix that is well suited to the underlying channel distribution for mmWave vehicular beam alignment. The proposed approach leverages both sparsity and the particular spatial structure that appears in vehicular channels. We model the compressive channel acquisition by a two-dimensional (2D) convolutional layer followed by dropout. We design fully-connected layers to optimize channel acquisition and beam alignment. We incorporate the low-resolution phase shifter constraint during neural network training by using projected gradient descent for weight updates. Furthermore, we exploit channel spectral structure to optimize the power allocated for different subcarriers. Simulations indicate that our deep learning-based approach achieves better beam alignment than standard CS techniques which use random phase shift-based design. Numerical experiments also show that one single subcarrier is sufficient to provide necessary information for beam alignment.

eess.SP↗

arXiv2020

Site-specific online compressive beam codebook learning in mmWave vehicular communication

Millimeter wave (mmWave) communication is one viable solution to support Gbps sensor data sharing in vehicular networks. The use of large antenna arrays at mmWave and high mobility in vehicular communication make it challenging to design fast beam alignment solutions. In this paper, we propose a novel framework that learns the channel angle-of-departure (AoD) statistics at a base station (BS) and uses this information to efficiently acquire channel measurements. Our framework integrates online learning for compressive sensing (CS) codebook learning and the optimized codebook is used for CS-based beam alignment. We formulate a CS matrix optimization problem based on the AoD statistics available at the BS. Furthermore, based on the CS channel measurements, we develop techniques to update and learn such channel AoD statistics at the BS. We use the upper confidence bound (UCB) algorithm to learn the AoD statistics and the CS matrix. Numerical results show that the CS matrix in the proposed framework provides faster beam alignment than standard CS matrix designs. Simulation results indicate that the proposed beam training technique can reduce overhead by 80% compared to exhaustive beam search, and 70% compared to standard CS solutions that do not exploit any AoD statistics.

eess.SP↗

arXiv2020

LIDAR Data for Deep Learning-Based mmWave Beam-Selection

Millimeter wave communication systems can leverage information from sensors to reduce the overhead associated with link configuration. LIDAR (light detection and ranging) is one sensor widely used in autonomous driving for high resolution mapping and positioning. This paper shows how LIDAR data can be used for line-of-sight detection and to reduce the overhead in millimeter wave beam-selection. In the proposed distributed architecture, the base station broadcasts its position. The connected vehicle leverages its LIDAR data to suggest a set of beams selected via a deep convolutional neural network. Co-simulation of communications and LIDAR in a vehicle-to-infrastructure (V2I) scenario confirm that LIDAR can help configuring mmWave V2I links.

eess.SP↗

arXiv2019

Leveraging Sensing at the Infrastructure for mmWave Communication

Vehicle-to-everything (V2X) communication in the mmWave band is one way to achieve high data-rates for applications like infotainment, cooperative perception, and augmented reality assisted driving etc. MmWave communication relies on large antennas arrays, and configuring these arrays poses high training overhead. In this article, we motivate the use of infrastructure mounted sensors (which will be part of future smart cities) for mmWave communication. We provide numerical and measurement results to demonstrate that information from these infrastructure sensors reduces the mmWave array configuration overhead. Finally, we outline future research directions to help materialize the use of infrastructure sensors for mmWave communication.

cs.IT↗

arXiv2019

Deep learning-based beam alignment in mmWave vehicular networks

Millimeter wave channels exhibit structure that allows beam alignment with fewer channel measurements than exhaustive beam search. From a compressed sensing (CS) perspective, the received channel measurements are usually obtained by multiplying a CS matrix with a sparse representation of the channel matrix. Due to the constraints imposed by analog processing, designing CS matrices that efficiently exploit the channel structure is, however, challenging. In this paper, we propose an end-to-end deep learning technique to design a structured CS matrix that is well suited to the underlying channel distribution, leveraging both sparsity and the particular spatial structure that appears in vehicular channels. The channel measurements acquired with the designed CS matrix are then used to predict the best beam for link configuration. Simulation results for vehicular communication channels indicate that our deep learning-based approach achieves better beam alignment than standard CS techniques that use the random phase shift-based design.

eess.SP↗

arXiv2019

Passive Radar at the Roadside Unit to Configure Millimeter Wave Vehicle-to-Infrastructure Links

Millimeter wave (mmWave) vehicular channels are highly dynamic, and the communication link needs to be reconfigured frequently. In this work, we propose to use a passive radar receiver at the roadside unit to reduce the training overhead of establishing an mmWave communication link. Specifically, the passive radar will tap the transmissions from the automotive radars of the vehicles on the road. The spatial covariance of the received radar signals will be estimated and used to establish the communication link. We propose a simplified radar receiver that does not require the transmitted waveform as a reference. To leverage the radar information for beamforming, the radar azimuth power spectrum (APS) and the communication APS should be similar. We outline a radar covariance correction strategy to increase the similarity between the radar and communication APS. We also propose a metric to compare the similarity of the radar and communication APS that has a connection with the achievable rate. We present simulation results based on ray-tracing data. The results show that: (i) covariance correction improves the similarity of radar and communication APS, and (ii) the radar-assisted strategy significantly reduces the training overhead, being particularly useful in non-line-of-sight scenarios.

cs.IT↗

arXiv2019

Dictionary Learning for Channel Estimation in Hybrid Frequency-Selective mmWave MIMO Systems

Exploiting channel sparsity at millimeter wave (mmWave) frequencies reduces the high training overhead associated with the channel estimation stage. Compressive sensing (CS) channel estimation techniques usually adopt the (overcomplete) wavelet/Fourier transform matrix as a sparsifying dictionary. This may not be the best choice when considering non-uniform arrays, antenna gain/phase errors, mutual coupling effects, etc. We propose two dictionary learning (DL) algorithms to learn the best sparsifying dictionaries for channel matrices from observations obtained with hybrid frequency-selective mmWave multiple-input-multiple-output (MIMO) systems. First, we optimize the combined dictionary, i.e., the Kronecker product of transmit and receive dictionaries, as it is used in practice to sparsify the channel matrix. Second, considering the different array structures at the transmitter and receiver, we exploit separable DL to find the best transmit and receive dictionaries. Once the channel is expressed in terms of the optimized dictionaries, various CS-based sparse recovery techniques can be applied for low overhead channel estimation. The proposed DL algorithms perform well under low SNR conditions inherent to any mmWave communication systems before the precoders/combiners can be optimized. The effectiveness of the proposed DL algorithms has been corroborated via numerical simulations with different system configurations, array geometries and hardware impairments.

cs.IT↗

arXiv2019

Spatial Channel Covariance Estimation for Hybrid Architectures Based on Tensor Decompositions

Spatial channel covariance information can replace full instantaneous channel state information for the analog precoder design in hybrid analog/digital architectures. Obtaining spatial channel covariance estimation, however, is challenging in the hybrid structure due to the use of fewer radio frequency (RF) chains than the number of antennas. In this paper, we propose a spatial channel covariance estimation method based on higher-order tensor decomposition for spatially sparse time-varying frequency-selective channels. The proposed method leverages the fact that the channel can be represented as a low-rank higher-order tensor. We also derive the Cramér-Rao lower bound on the estimation accuracy of the proposed method. Numerical results and theoretical analysis show that the proposed tensor-based approach achieves higher estimation accuracy in comparison with prior compressive-sensing-based approaches or conventional angle-of-arrival estimation approaches. Simulation results reveal that the proposed approach becomes more beneficial at low signal-to-noise (SNR) region.

eess.SP↗

arXiv2018

Spatial Covariance Estimation for Millimeter Wave Hybrid Systems using Out-of-Band Information

In high mobility applications of millimeter wave (mmWave) communications, e.g., vehicle-to-everything communication and next-generation cellular communication, frequent link configuration can be a source of significant overhead. We use the sub-6 GHz channel covariance as an out-of-band side information for mmWave link configuration. Assuming: (i) a fully digital architecture at sub-6 GHz; and (ii) a hybrid analog-digital architecture at mmWave, we propose an out-of-band covariance translation approach and an out-of-band aided compressed covariance estimation approach. For covariance translation, we estimate the parameters of sub-6 GHz covariance and use them in theoretical expressions of covariance matrices to predict the mmWave covariance. For out-of-band aided covariance estimation, we use weighted sparse signal recovery to incorporate out-of-band information in compressed covariance estimation. The out-of-band covariance translation eliminates the in-band training completely, whereas out-of-band aided covariance estimation relies on in-band as well as out-of-band training. We also analyze the loss in the signal-to-noise ratio due to an imperfect estimate of the covariance. The simulation results show that the proposed covariance estimation strategies can reduce the training overhead compared to the in-band only covariance estimation.

cs.IT↗