arXiv subjects

Paolo Lacovig

Publications and source records attributed to Paolo Lacovig.

13 recordsLinked to original sources

arXiv2026

Interfacial Oxidation Enables Charge-Transfer Contacts and Degenerate n-Doping in Monolayer MoS$_2$

High contact resistance remains a central obstacle to the integration of two-dimensional (2D) semiconductors in electronic devices. Recent advances have demonstrated that contact performance can be dramatically improved through interface engineering, including the use of group-V semimetals and charge-transfer contacts based on strong interfacial doping. Here, we show that controlled interfacial oxidation provides an effective route to convert a semimetal contact into a charge-transfer contact that degenerately $n$-dopes single layer MoS$_2$. Using a combination of angle-resolved photoemission spectroscopy, X-ray photoelectron diffraction, low-energy electron diffraction and scanning tunnelling spectroscopy, we demonstrate that putting single layer MoS$_2$ in contact with a pristine Bi layer merely results in weak doping, whereas oxidation of the Bi layer leads to a pronounced occupation of the MoS$_2$ conduction band with an electron density on the order of $10^{13}$~cm$^{-2}$. The cause of this strong electron doping is the fact that an ultrathin $β$-Bi$_2$O$_3$ layer forms below the MoS$_2$ and that this has a particularly low work function, thereby acting as an efficient electron donor to MoS$_2$. Interfacial oxidation thus emerges as a powerful design knob for engineering charge-transfer contacts to 2D semiconductors.

cond-mat.mtrl-sci↗

arXiv2023

Interfacial two-dimensional oxide enhances photocatalytic activity of graphene/titania via electronic structure modification

A two-dimensional layer of oxide reveals itself as a essential element to drive the photocatalytic activity in a nanostructured hybrid material, which combines high-quality epitaxial graphene and titanium dioxide nanoparticles. In particular, it has been revealed that the addition of a 2D Ti oxide layer sandwiched between graphene and metal induces a p-doping of graphene and a consistent shift in the Ti d states. These modifications induced by the interfacial oxide layer induce a reduction of the probability of charge carrier recombination and enhance the photocatalytic activity of the heterostructure. This is indicative of a capital role played by thin oxide films in fine-tuning the properties of heterostructures based on graphene and pave the way to new combinations of graphene/oxides for photocatalysis-oriented applications.

cond-mat.mtrl-sci↗

arXiv2022

Probing the Atomic Arrangement of Sub-Surface Dopants in a Silicon Quantum Device Platform

High-density structures of sub-surface phosphorus dopants in silicon continue to garner interest as a silicon-based quantum computer platform, however, a much-needed confirmation of their dopant arrangement has been lacking. In this work, we take advantage of the chemical specificity of X-ray photoelectron diffraction to obtain the precise structural configuration of P dopants in sub-surface Si:P $δ$-layers. The growth of $δ$-layer systems with different levels of doping is carefully studied and verified using X-ray photoelectron spectroscopy and low-energy electron diffraction. Subsequent XPD measurements reveal that in all cases, the dopants primarily substitute with Si atoms from the host material. Furthermore, no signs of free carrier-inhibiting P$-$P dimerization can be observed. Our observations not only settle a nearly decade-long debate about the dopant arrangement but also demonstrate that XPD is well suited to study sub-surface dopant structures. This work thus provides valuable input for an updated understanding of the behavior of Si:P $δ$-layers and the modeling of their derived quantum devices.

cond-mat.mtrl-sci↗

arXiv2021

Ultrafast electronic line width broadening in the C 1s core level of graphene

Core level binding energies and absorption edges are at the heart of many experimental techniques concerned with element-specific structure, electronic structure, chemical reactivity, elementary excitations and magnetism. X-ray photoemission spectroscopy (XPS) in particular, can provide information about the electronic and vibrational many-body interactions in a solid as these are reflected in the detailed energy distribution of the photoelectrons. Ultrafast pump-probe techniques add a new dimension to such studies, introducing the ability to probe a transient state of the many-body system. Here we use a free electron laser to investigate the effect of a transiently excited electron gas on the core level spectrum of graphene, showing that it leads to a large broadening of the C 1s peak. Confirming a decade-old prediction, the broadening is found to be caused by an exchange of energy and momentum between the photoemitted core electron and the hot electron system, rather than by vibrational excitations. This interpretation is supported by a line shape analysis that accounts for the presence of the excited electrons. Fitting the spectra to this model directly yields the electronic temperature of the system, in agreement with electronic temperature values obtained from valence band data. Furthermore, making use of time- and momentum-resolved C 1s spectra, we illustrate how the momentum change of the outgoing core electrons leads to a small but detectable change in the time-resolved photoelectron diffraction pattern and to a nearly complete elimination of the core level binding energy variation associated with the narrow $σ$-band in the C 1s state. The results demonstrate that the XPS line shape can be used as an element-specific and local probe of the excited electron system and that X-ray photoelectron diffraction investigations remain feasible at very high electronic temperatures.

cond-mat.str-el↗

arXiv2021

Electronic Properties of Single-Layer CoO$_2$/Au(111)

We report direct measurements via angle-resolved photoemission spectroscopy (ARPES) of the electronic dispersion of single-layer CoO$_2$. The Fermi contour consists of a large hole pocket centered at the $\overlineΓ$ point. To interpret the ARPES results, we use density functional theory (DFT) in combination with the multi-orbital Gutzwiller Approximation (DFT+GA), basing our calculations on crystalline structure parameters derived from x-ray photoelectron diffraction and low-energy electron diffraction. Our calculations are in good agreement with the measured dispersion. We conclude that the material is a moderately correlated metal. We also discuss substrate effects, and the influence of hydroxylation on the CoO$_2$ single-layer electronic structure.

cond-mat.mtrl-sci↗

arXiv2018

Electron-phonon coupling in single-layer MoS2

The electron-phonon coupling strength in the spin-split valence band maximum of single-layer MoS$_2$ is studied using angle-resolved photoemission spectroscopy and density functional theory-based calculations. Values of the electron-phonon coupling parameter $λ$ are obtained by measuring the linewidth of the spin-split bands as a function of temperature and fitting the data points using a Debye model. The experimental values of $λ$ for the upper and lower spin-split bands at K are found to be 0.05 and 0.32, respectively, in excellent agreement with the calculated values for a free-standing single-layer MoS$_2$. The results are discussed in the context of spin and phase-space restricted scattering channels, as reported earlier for single-layer WS$_2$ on Au(111). The fact that the absolute valence band maximum in single-layer MoS$_2$ at K is almost degenerate with the local valence band maximum at $Γ$ can potentially be used to tune the strength of the electron-phonon interaction in this material.

cond-mat.mtrl-sci↗

arXiv2018

Growth and Structure of Singly-Oriented Single-Layer Tungsten Disulfide on Au(111)

We present a complete characterisation at the nanoscale of the growth and structure of single-layer tungsten disulfide (WS$_2$) epitaxially grown on Au(111). Following the growth process in real time with fast x-ray photoelectron spectroscopy, we obtain a singly-oriented layer by choosing the proper W evaporation rate and substrate temperature during the growth. Information about the morphology, size and layer stacking of the WS$_2$ layer were achieved by employing x-ray photoelectron diffraction and low-energy electron microscopy. The strong spin splitting in the valence band of WS$_2$ coupled with the single-orientation character of the layer make this material the ideal candidate for the exploitation of the spin and valley degrees of freedom.

cond-mat.mtrl-sci↗

arXiv2018

Novel single-layer vanadium sulphide phases

VS2 is a challenging material to prepare stoichiometrically in the bulk, and the single layer has not been successfully isolated before now. Here we report the first realization of single-layer VS2, which we have prepared epitaxially with high quality on Au(111) in the octahedral (1T) structure. We find that we can deplete the VS2 lattice of S by annealing in vacuum so as to create an entirely new two-dimensional compound that has no bulk analogue. The transition is reversible upon annealing in an H2S gas atmosphere. We report the structural properties of both the stoichiometric and S-depleted compounds on the basis of low-energy electron diffraction, X-ray photoelectron spectroscopy and diffraction, and scanning tunneling microscopy experiments.

cond-mat.mtrl-sci↗

arXiv2018

Epitaxial Growth of Single-Orientation High-Quality MoS$_2$ Monolayers

We present a study on the growth and characterization of high-quality single-layer MoS$_2$ with a single orientation, i.e. without the presence of mirror domains. This single orientation of the MoS$_2$ layer is established by means of x-ray photoelectron diffraction. The high quality is evidenced by combining scanning tunneling microscopy with x-ray photoelectron spectroscopy measurements. Spin- and angle-resolved photoemission experiments performed on the sample revealed complete spin-polarization of the valence band states near the K and -K points of the Brillouin zone. These findings open up the possibility to exploit the spin and valley degrees of freedom for encoding and processing information in devices that are based on epitaxially grown materials.

cond-mat.mtrl-sci↗

arXiv2018

Photoemission Investigation of Oxygen Intercalated Epitaxial Graphene on Ru(0001)

We study the formation of epitaxial graphene on Ru(0001) using fast x-ray photoelectron spectroscopy during the growth process. The assignment of different C 1s and Ru 3d core level components and their evolution during the growth process gives a detailed insight into the graphene formation and the strongly varying graphene-Ru interaction strength within the large moire unit cell. Subsequent intercalation of oxygen can be achieved at elevated temperature and the core level spectra show a conversion of the strongly corrugated to quasi free-standing graphene, characterised by a single narrow C 1s component. This conversion and the accompanying flattening of the graphene layer is also confirmed by x-ray photoelectron diffraction. The effect of oxygen intercalation on the electronic structure is studied using angle-resolved photoemission of the valence band states. For graphene/Ru(0001), the strong graphene-substrate hybridisation disrupts the π-band dispersion but oxygen intercalation fully restores the π-band with a strong p-doping that shifts the Dirac point 785 meV above the Fermi level. The doping of the system is highly tunable, as the additional exposure to rubidium can convert the carrier filling to n-type with the Dirac point 970 meV below the Fermi level.

cond-mat.mtrl-sci↗

arXiv2017

Electron-phonon coupling in the spin-split valence band of single layer WS$_2$

The absence of inversion symmetry leads to a strong spin-orbit splitting of the upper valence band of semiconducting single layer transition metal dichalchogenides such as MoS$_2$ or WS$_2$. This permits a direct comparison of the electron-phonon coupling strength in states that only differ by their spin. Here, the electron-phonon coupling in the valence band maximum of single-layer WS$_2$ is studied by first principles calculations and angle-resolved photoemission. The coupling strength is found to be drastically different for the two spin-split branches, with calculated values of $λ_K=$0.0021 and 0.40 for the upper and lower spin-split valence band of the free-standing layer, respectively. This difference is somewhat reduced when including scattering processes involving the Au(111) substrate present in the experiment and the experimental results confirm the strongly branch-dependent coupling strength.

cond-mat.str-el↗

arXiv2016

Disentangling Vacancy Oxidation on Metallicity-Sorted Carbon Nanotubes

Pristine single-walled carbon nanotubes (SWCNTs) are rather inert to O$_2$ and N$_2$, which for low doses chemisorb only on defect sites or vacancies of the SWCNTs at the ppm level. However, very low doping has a major effect on the electronic properties and conductivity of the SWCNTs. Already at low O$_2$ doses (80 L), the X-ray photoelectron spectroscopy (XPS) O 1s signal becomes saturated, indicating nearly all the SWCNT's vacancies have been oxidized. As a result, probing vacancy oxidation on SWCNTs via XPS yields spectra with rather low signal-to-noise ratios, even for metallicity-sorted SWCNTs. We show that, even under these conditions, the first principles density functional theory calculated Kohn-Sham O 1s binding energies may be used to assign the XPS O 1s spectra for oxidized vacancies on SWCNTs into its individual components. This allows one to determine the specific functional groups or bonding environments measured. We find the XPS O 1s signal is mostly due to three O-containing functional groups on SWCNT vacancies: epoxy (C$_2$$>$O), carbonyl (C$_2$$>$C$=$O), and ketene (C$=$C$=$O), as ordered by abundance. Upon oxidation of nearly all the SWCNT's vacancies, the central peak's intensity for the metallic SWCNT sample is 60\% greater than for the semiconducting SWCNT sample. This suggests a greater abundance of O-containing defect structures on the metallic SWCNT sample. For both metallic and semiconducting SWCNTs, we find O$_2$ does not contribute to the measured XPS O~1s spectra.

cond-mat.mes-hall↗

arXiv2012

Transfer-free electrical insulation of epitaxial graphene from its metal substrate

High-quality, large-area epitaxial graphene can be grown on metal surfaces but its transport properties cannot be exploited because the electrical conduction is dominated by the substrate. Here we insulate epitaxial graphene on Ru(0001) by a step-wise intercalation of silicon and oxygen, and the eventual formation of a SiO$_2$ layer between the graphene and the metal. We follow the reaction steps by x-ray photoemission spectroscopy and demonstrate the electrical insulation using a nano-scale multipoint probe technique.

cond-mat.mes-hall↗