arXiv subjects

R. O'Brient

Publications and source records attributed to R. O'Brient.

At least 19 recordsLinked to original sources

arXiv2026

Aliased noise characterization and mitigation in BICEP Array 150, 220 and 270 GHz time-division multiplexed detectors

Early observations with the BICEP Array 150 GHz (BA2-150) and 220/270 GHz (BA3-220/270) receivers revealed detector noise equivalent temperatures (NETs) higher than expected, together with substantial detector-to-detector and module-to-module scatter. Noise measurements acquired with multiplexing off and high frequency sampling demonstrate that this excess originates from elevated high-frequency detector noise that aliases into the science band during time-division multiplexing. We show that the excess high-frequency noise is correlated with anomalously large logarithmic TES transition slopes, {\alpha}, resulting in elevated electrothermal loop gain and operation near the detector stability boundary. Measurements of {\alpha} indicate values substantially larger than expected, consistent with the sharper superconducting transitions introduced by the inverted TES fabrication process adopted for BA2-150 and BA3-220/270 detectors. Operational mitigation strategies were investigated through both increased multiplexing rates and elevated focal-plane operating temperatures. Faster multiplexing reduces aliasing by shifting the multiplexing Nyquist frequency beyond the excess noise roll-off, while elevated bath temperatures reduce TES electrical power and loop gain, improving detector stability and reducing NET by approximately 10%. These results demonstrate the importance of balancing TES responsivity, electrothermal stability, and multiplexed readout performance in next-generation CMB polarimeters.

physics.ins-det↗

arXiv2026

Optical characterization of the BICEP array 150 and 220/270GHz CMB polarimeters in the 2026 season

BICEP Array (BA) is the current-generation instrument in the BICEP series of small-aperture, on-axis refracting telescopes at the South Pole, designed to constrain the tensor-to-scalar ratio $r$ through degree-scale measurements of B-mode polarization in the cosmic microwave background (CMB). As BA pushes to deeper sensitivity, control of instrumental systematics, and beam shape mismatch between the co-located orthogonally polarized detectors in particular, has become an increasingly important factor in translating raw sensitivity into a robust constraint on $r$. In these proceedings we report on the 2026 far field beam mapping (FFBM) campaign, which used a thermal chopped source to characterize the BA2 (150~GHz) and BA3 (220/270~GHz) beams. We fit two-dimensional elliptical Gaussians to each detector's beam, derive per-pair differential parameters (differential pointing, beamwidth, and ellipticity). The resulting high-signal-to-noise array-averaged beam maps are used to compute the beam window function $B_l$ for the power spectrum analysis, while the individual per-detector beams feed dedicated beam convolution simulations used to validate the temperature-to-polarization (T$\rightarrow$ P) deprojection procedure. After correcting for the chopper aperture, the recovered beamwidths follow the expected $\lambda/D$ ordering. We also describe two pipeline improvements carried out during the 2026 campaign: an out-and-back jackknife for noise quantification and an elnod-based gain calibration.

astro-ph.IM↗

arXiv2026

Advanced Time-Division Multiplexed Readout Chain for the BICEP Array 90/150 GHz Receiver

This work presents the current performance of the advanced time-division multiplexed (TDM) readout chain for the BICEP Array 90/150 GHz receiver. BA4-90/150, scheduled for deployment to the South Pole in 2026--27, will use photon-noise-limited, feedhorn-coupled transition edge sensor detectors and an upgraded DC SQUID-based TDM system to map the cosmic microwave background. This new TDM system mitigates readout-induced systematics that are beginning to emerge above the noise floor of the most sensitive maps produced by the BICEP collaboration. Improvements include faster, fully differential SQUID designs, higher TES signal amplification, reduced crosstalk, and hierarchical row-addressing that reduces wiring required for row switching. Measurements made through legacy single-ended warm readout electronics show the upgraded cryogenic readout chain performs as well as or better than the TDM system currently fielded on the BICEP experiment. New warm electronics currently in development at SLAC National Accelerator Laboratory will provide matched fully differential circuits and higher bandwidth, reducing RF susceptibility and aliased noise contributions. On-sky demonstration of this technology will establish a new low-noise, high-bandwidth TDM architecture for future CMB observatories.

astro-ph.IM↗

arXiv2026

Optics and broadband anti-reflection coatings for the BA4-90/150 receiver

The BICEP Array telescopes search for primordial B-mode polarization from inflationary gravitational waves. This signal is exceedingly faint, demanding excellent map depth and systematics control. The new BA4-90/150 receiver introduces a wide 80-169GHz dichroic band, requiring upgrades throughout the optics chain to reduce loss, reflections, and thermal loading. We developed improved anti-reflection (AR) coatings for our HMPE window, HDPE lenses, and nylon infrared filter, extending our AR technology to span more than an octave of bandwidth. The thermal filtering scheme and several mechanical elements were also updated to further suppress optical loss, reflections, and beam truncation. We aim to build on the proven success of deployed BICEP Array (BA) telescopes to produce a new small aperture instrument with the lowest optical systematics to date.

astro-ph.IM↗

arXiv2026

Status of BICEP Array and Integration of the 220/270 GHz Receiver

Measurements of the polarization of the cosmic microwave background are critical for modern cosmology as they constrain the physics of the early universe and cosmic inflation. BICEP Array is using a series of small-aperture polarimeters located at the South Pole to measure this signal with a projected uncertainty on the tensor-to-scalar ratio r of approximately 0.001 by 2034. The 30/40 GHz receiver and the 150 GHz receiver have been observing the cosmic microwave background for multiple years, and data from these receivers will be included in the next published BICEP analysis result which includes all data taken through 2024. The 220/270 GHz receiver is partially completed with seven out of twelve detector modules installed, and is planned to be filled with five additional modules prior to the 2027 observation season. Finishing this receiver is a top priority for BA as the science goals of the experiment require the dust foreground cleaning this receiver will enable. On-site characterization efforts for this receiver from the 2025-26 austral summer show satisfactory spectroscopy, beam pointing, and 220 GHz efficiency, while the 270 GHz efficiency is an active area of work.

astro-ph.IM↗

arXiv2026

Quantifying the systematic impact of differential beam response on the BICEP CMB polarization data from 2016 through 2024

As cosmic microwave background (CMB) polarization experiments, including BICEP3, BICEP Array, and future BICEP experiments, achieve ever-deeper polarization maps in search of primordial B-modes sourced from inflation, constraining instrumental systematics below statistical uncertainties becomes progressively more challenging. Since polarimetry in the BICEP telescopes is performed by pair-differencing co-located, orthogonally polarized detectors, differential beam response leads to temperature-to-polarization ($T \rightarrow P$) leakage, introducing a potential systematic bias on the inferred tensor-to-scalar ratio $r$. To mitigate this leakage, the lowest-order beam mismatch modes are filtered out of the CMB polarization maps through deprojection; however, residual undeprojected modes remain. To quantify this residual contamination, we perform dedicated in situ far-field beam measurements of the BICEP receivers during austral-summer calibration campaigns. We quantify the systematic impact of the undeprojected residuals with a specialized set of timestream simulations based on the measured per-detector beams. These "beam measurement-informed simulations" yield an estimate of the false polarized signal sourced by the undeprojected residuals. We summarize the beam measurements relevant to the BK24 data release and present preliminary residual-leakage results for BICEP3 at 95 GHz. For BICEP3 over 2016-2024, deprojecting all six standard templates together with readout-crosstalk templates and their radially smoothed counterparts reduces the equivalent-$r$ leakage amplitude from $\rho=(4.5\pm0.7)\times10^{-3}$ to $(1.12\pm0.06)\times10^{-3}$. We further describe an ongoing program to extend the deprojection basis beyond its historical six modes, guided by a forward optical model that relates candidate leakage modes to perturbations of physical instrument parameters.

astro-ph.CO↗

arXiv2026

Engineering of titanium transition edge sensor wafers for the BA4-90/150 receiver of BICEP Array

BA4-90/150, the fourth receiver to be deployed in the BICEP Array (BA) series, is a dichroic 90/150 GHz instrument targeting the frequency space where sensitivity to the CMB polarization is maximized. The receiver will be deployed in the 2026-2027 austral summer, and is set to position BA to achieve exceptionally precise measurements of cosmic microwave background (CMB) polarization and strengthen constraints on inflationary models. Recent measurements in existing BA receivers suggest that unexpectedly high loop gain in the titanium (Ti) transition edge sensors (TESs) produces excess high-frequency noise that is consequently aliased down into the science band through the time-division multiplexed readout. To reduce the loop gain, we fabricated and tested prototype Ti TES wafers containing 16 modified detector architectures designed to broaden the superconducting transition and reduce the transition steepness (alpha). We present detector performance results, which will directly inform the final integrated wafer now being designed for full receiver commissioning.

astro-ph.IM↗

arXiv2026

Overview and status of BICEP Array's BA4-90/150 CMB polarimeter

The inflation paradigm postulates a period of rapid expansion in the early Universe, which would generate gravitational waves. These tensor perturbations would produce a faint B-mode signature in the polarization of the cosmic microwave background (CMB), but this signal is orders of magnitude weaker than that from the CMB's other anisotropy and that from astrophysical foregrounds. Placing more-stringent upper limits on this signal or making a definitive detection thus requires exceptional control over instrument and measurement systematics, in addition to extremely-deep maps. The fourth BICEP Array receiver, BA4-90/150, aims to build and improve upon the heritage of the field-leading BICEP series of small-aperture CMB experiments with a dichroic instrument observing in 90 and 150 GHz bands, to advance the search for the inflationary B-mode signal. The instrument will utilize transition-edge-sensor bolometers, which will be read out using a new two-level time-division-multiplexed system and be fed via feedhorn-coupled orthomode transducers and refined cold refractive optics, with the goal of both improving systematics control and sensitivity over existing receivers. With a planned deployment to the South Pole in the 2026-27 austral summer, the instrument will occupy the fourth and final remaining slot in the BICEP Array mount, completing the phaseout of Keck Array receivers. An overview of the BA4-90/150 receiver will be presented, along with a discussion of its current status and future plans for the instrument.

astro-ph.IM↗

arXiv2026

Design and Performance of 220 and 270 GHz Bandpass Filters for BICEP Array

The BICEP Array (BA) is the latest in the BICEP/ Keck series of experiments that aim to measure the polarization of the cosmic microwave background (CMB) with small aperture polarimeters located at the South Pole. To constrain the frequency response of these receivers, each detector is serially coupled to a band-pass filter (BPF). The electric circuits of these BPFs utilize series and shunt capacitors as well as series inductors, but critically do not include shunt inductors which simplifies fabrication. The filters are designed and simulated with Sonnet, and optimized for noise by considering loading from the atmosphere and the CMB. Multiple 220 GHz detector modules have had their frequency response measured at the South Pole. The 270 GHz detector modules have recently begun testing in a lab setting, and their performance in a BA receiver will be measured this winter.

astro-ph.IM↗

arXiv2026

Controlling instrumental systematics for the BICEP inflation survey

The BICEP series of experiments has been observing CMB polarisation from the South Pole for over 20 years, with the goal of constraining inflationary gravitational waves. The upcoming data release, using data taken through 2024, is forecasted to constrain the tensor-to-scalar ratio $r$ at the level of $\sigma(r) \sim 0.005$ (including delensing), with the longer-term goal of reaching $\sigma(r) \sim 0.001$ by 2034. As the survey sensitivity increases, it is crucial to control instrumental systematics to unprecedented levels, and our goal is to limit dominant sources of systematics to 20% of $\sigma(r)$ or lower. Achieving this requires careful instrumental characterisation and dedicated end-to-end studies to evaluate the impact of each systematic on cosmological parameters. We first present the BICEP calibration program, which characterises the optical, spectral, and polarisation response of the receivers. We then describe the analysis strategies implemented to identify and mitigate systematic contamination, and we detail simulations used to evaluate the impact of residual effects. We focus in particular on beam systematics, the dominant source of systematics for BICEP receivers. Finally, we report preliminary estimates of the expected level of systematic contamination for upcoming BICEP results, and we discuss approaches to evaluate and mitigate instrumental systematics for future surveys.

astro-ph.CO↗

arXiv2025

Improved Absolute Polarization Calibrator for BICEP CMB Polarimeters

Cosmic birefringence is a hypothesized parity violation in electromagnetism that predicts a frequency-independent polarization rotation as light propagates. This would rotate the light from the Cosmic Microwave Background, producing an unexpected EB correlation. However, cosmic birefringence angle is degenerate with instrument polarization angle, and breaking this degeneracy requires an absolute polarization calibration. We calibrate the BICEP3 telescope (a 95GHz CMB polarimeter) by observing a rotating polarized source (RPS) with both the telescope and a small test receiver called the In-Situ Absolute Angle Calibrator (ISAAC).

astro-ph.IM↗

arXiv2025

Analysis of Polarized Dust Emission Using Data from the First Flight of SPIDER

Using data from the first flight of SPIDER and from Planck HFI, we probe the properties of polarized emission from interstellar dust in the SPIDER observing region. Component separation algorithms operating in both the spatial and harmonic domains are applied to probe their consistency and to quantify modeling errors associated with their assumptions. Analyses of diffuse Galactic dust emission spanning the full SPIDER region demonstrate i) a spectral energy distribution that is broadly consistent with a modified-blackbody (MBB) model with a spectral index of $β_\mathrm{d}=1.45\pm0.05$ $(1.47\pm0.06)$ for $E$ ($B$)-mode polarization, slightly lower than that reported by Planck for the full sky; ii) an angular power spectrum broadly consistent with a power law; and iii) no significant detection of line-of-sight polarization decorrelation. Tests of several modeling uncertainties find only a modest impact (~10% in $σ_r$) on SPIDER's sensitivity to the cosmological tensor-to-scalar ratio. The size of the SPIDER region further allows for a statistically meaningful analysis of the variation in foreground properties within it. Assuming a fixed dust temperature $T_\mathrm{d}=19.6$ K, an analysis of two independent sub-regions of that field results in inferred values of $β_\mathrm{d}=1.52\pm0.06$ and $β_\mathrm{d}=1.09\pm0.09$, which are inconsistent at the $3.9\,σ$ level. Furthermore, a joint analysis of SPIDER and Planck 217 and 353 GHz data within one sub-region is inconsistent with a simple MBB at more than $3\,σ$, assuming a common morphology of polarized dust emission over the full range of frequencies. This evidence of variation may inform the component-separation approaches of future CMB polarization experiments.

astro-ph.GA↗

arXiv2024

Development of the 220/270 GHz Receiver of BICEP Array

Measurements of B-mode polarization in the CMB sourced from primordial gravitational waves would provide information on the energy scale of inflation and its potential form. To achieve these goals, one must carefully characterize the Galactic foregrounds, which can be distinguished from the CMB by conducting measurements at multiple frequencies. BICEP Array is the latest-generation multi-frequency instrument of the BICEP/Keck program, which specifically targets degree-scale primordial B-modes in the CMB. In its final configuration, this telescope will consist of four small-aperture receivers, spanning frequency bands from 30 to 270 GHz. The 220/270 GHz receiver designed to characterize Galactic dust is currently undergoing commissioning at Stanford University and is scheduled to deploy to the South Pole during the 2024--2025 austral summer. Here, we will provide an overview of this high-frequency receiver and discuss the integration status and test results as it is being commissioned.

astro-ph.IM↗

arXiv2024

Constraining Inflation with the BICEP/Keck CMB Polarization Experiments

The BICEP/$\textit{Keck}$ (BK) series of cosmic microwave background (CMB) polarization experiments has, over the past decade and a half, produced a series of field-leading constraints on cosmic inflation via measurements of the "B-mode" polarization of the CMB. Primordial B modes are directly tied to the amplitude of primordial gravitational waves (PGW), their strength parameterized by the tensor-to-scalar ratio, $r$, and thus the energy scale of inflation. Having set the most sensitive constraints to-date on $r$, $σ(r)=0.009$ ($r_{0.05}<0.036, 95\%$ C.L.) using data through the 2018 observing season ("BK18"), the BICEP/$\textit{Keck}$ program has continued to improve its dataset in the years since. We give a brief overview of the BK program and the "BK18" result before discussing the program's ongoing efforts, including the deployment and performance of the $\textit{Keck Array}$'s successor instrument, BICEP Array, improvements to data processing and internal consistency testing, new techniques such as delensing, and how those will ultimately serve to allow BK reach $σ(r) \lesssim 0.003$ using data through the 2027 observing season.

astro-ph.CO↗

arXiv2023

BICEP / Keck XVII: Line of Sight Distortion Analysis: Estimates of Gravitational Lensing, Anisotropic Cosmic Birefringence, Patchy Reionization, and Systematic Errors

We present estimates of line-of-sight distortion fields derived from the 95 GHz and 150 GHz data taken by BICEP2, BICEP3, and Keck Array up to the 2018 observing season, leading to cosmological constraints and a study of instrumental and astrophysical systematics. Cosmological constraints are derived from three of the distortion fields concerning gravitational lensing from large-scale structure, polarization rotation from magnetic fields or an axion-like field, and the screening effect of patchy reionization. We measure an amplitude of the lensing power spectrum $A_L^{ϕϕ}=0.95 \pm 0.20$. We constrain polarization rotation, expressed as the coupling constant of a Chern-Simons electromagnetic term $g_{aγ} \leq 2.6 \times 10^{-2}/H_I$, where $H_I$ is the inflationary Hubble parameter, and an amplitude of primordial magnetic fields smoothed over 1 Mpc $B_{1\text{Mpc}} \leq 6.6 \;\text{nG}$ at 95 GHz. We constrain the root mean square of optical-depth fluctuations in a simple "crinkly surface" model of patchy reionization, finding $A^τ<0.19$ ($2σ$) for the coherence scale of $L_c=100$. We show that all of the distortion fields of the 95 GHz and 150 GHz polarization maps are consistent with simulations including lensed-$Λ$CDM, dust, and noise, with no evidence for instrumental systematics. In some cases, the EB and TB quadratic estimators presented here are more sensitive than our previous map-based null tests at identifying and rejecting spurious B-modes that might arise from instrumental effects. Finally, we verify that the standard deprojection filtering in the BICEP/Keck data processing is effective at removing temperature to polarization leakage.

astro-ph.CO↗

arXiv2023

BICEP / Keck XVI: Characterizing Dust Polarization through Correlations with Neutral Hydrogen

We characterize Galactic dust filaments by correlating BICEP/Keck and Planck data with polarization templates based on neutral hydrogen (H I) observations. Dust polarization is important for both our understanding of astrophysical processes in the interstellar medium (ISM) and the search for primordial gravitational waves in the cosmic microwave background (CMB). In the diffuse ISM, H I is strongly correlated with the dust and partly organized into filaments that are aligned with the local magnetic field. We analyze the deep BICEP/Keck data at 95, 150, and 220 GHz, over the low-column-density region of sky where BICEP/Keck has set the best limits on primordial gravitational waves. We separate the H I emission into distinct velocity components and detect dust polarization correlated with the local Galactic H I but not with the H I associated with Magellanic Stream I. We present a robust, multifrequency detection of polarized dust emission correlated with the filamentary H I morphology template down to 95 GHz. For assessing its utility for foreground cleaning, we report that the H I morphology template correlates in B modes at a $\sim$10-65$\%$ level over the multipole range $20 < \ell < 200$ with the BICEP/Keck maps, which contain contributions from dust, CMB, and noise components. We measure the spectral index of the filamentary dust component spectral energy distribution to be $β= 1.54 \pm 0.13$. We find no evidence for decorrelation in this region between the filaments and the rest of the dust field or from the inclusion of dust associated with the intermediate velocity H I. Finally, we explore the morphological parameter space in the H I-based filamentary model.

astro-ph.GA↗

arXiv2022

Improved Polarization Calibration of the BICEP3 CMB Polarimeter at the South Pole

The BICEP3 Polarimeter is a small aperture, refracting telescope, dedicated to the observation of the Cosmic Microwave Background (CMB) at 95GHz. It is designed to target degree angular scale polarization patterns, in particular the very-much-sought-after primordial B-mode signal, which is a unique signature of cosmic inflation. The polarized signal from the sky is reconstructed by differencing co-localized, orthogonally polarized superconducting Transition Edge Sensor (TES) bolometers. In this work, we present absolute measurements of the polarization response of the detectors for more than $\sim 800$ functioning detector pairs of the BICEP3 experiment, out of a total of $\sim 1000$. We use a specifically designed Rotating Polarized Source (RPS) to measure the polarization response at multiple source and telescope boresight rotation angles, to fully map the response over 360 degrees. We present here polarization properties extracted from on-site calibration data taken in January 2022. A similar calibration campaign was performed in 2018, but we found that our constraint was dominated by systematics on the level of $\sim0.5^\circ$. After a number of improvements to the calibration set-up, we are now able to report a significantly lower level of systematic contamination. In the future, such precise measurements will be used to constrain physics beyond the standard cosmological model, namely cosmic birefringence.

astro-ph.IM↗

arXiv2022

Thermal Testing for Cryogenic CMB Instrument Optical Design

Observations of the Cosmic Microwave Background rely on cryogenic instrumentation with cold detectors, readout, and optics providing the low noise performance and instrumental stability required to make more sensitive measurements. It is therefore critical to optimize all aspects of the cryogenic design to achieve the necessary performance, with low temperature components and acceptable system cooling requirements. In particular, we will focus on our use of thermal filters and cold optics, which reduce the thermal load passed along to the cryogenic stages. To test their performance, we have made a series of in situ measurements while integrating the third receiver for the BICEP Array telescope. In addition to characterizing the behavior of this receiver, these measurements continue to refine the models that are being used to inform design choices being made for future instruments.

astro-ph.IM↗