Searcharxiv⌕ Search

arXiv subjects

S. L. Bud'ko

Publications and source records attributed to S. L. Bud'ko.

At least 289 records · Page 16Linked to original sources

Thermodynamic and transport properties of RAgGe (R=Tb-Lu) single crystals

Single crystals of the title compounds were grown out of an AgGe-rich ternary solution. Powder x-ray diffraction data confirmed the hexagonal AlNiZr-type structure ($P\bar{6}2m$ space group), an ordered variant of the Fe$_2$P structure type. Antiferromagnetic ordering can be inferred from magnetization, resistance and specific heat measurements, with values of T$_N$ between 28.5 K for TbAgGe, and 1.0 K for YbAgGe, which scale roughly with the de Gennes factor. Anisotropic $M(H)$ measurements indicate one or more metamagnetic transitions when the external field is applied along the c-axis (for R=Tb) or perpendicular to it (R = Ho, Er, Tm), or even in both orientations as in the case of DyAgGe. Furthermore, the extreme anisotropy of the magnetization in TmAgGe, where magnetic moments lie in the $ab$-plane, provides the possibility of studying the angular dependence of metamagnetism in hexagonal compounds with the rare earth in orthorhombic point symmetry. YbAgGe has distinct properties from the rest of the series: an enhanced electronic specific heat coefficient ($γ\approx$(154.2$\pm$2.5)mJ/mol*K$^2$), and apparently small moment magnetic ordering below 1.0 K. This compound appears to be close to a quantum critical point.

cond-mat.str-el↗

Magnetic Field Induced Non-Fermi-Liquid Behavior in YbAgGe Single Crystal

Detailed anisotropic resistivity and heat capacity measurements down to ~0.4 K and up to 140 kOe are reported for a single crystalline YbAgGe. Based on these data YbAgGe, a member of the hexagonal RAgGe series, can be classified as new, stoichiometric heavy fermion compound with two magnetic ordering temperatures below 1 K and field-induced non-Fermi-liquid behavior above 45-70 kOe and 80-110 kOe for $H || (ab) and H || c respectively.

cond-mat.str-el↗

Lock-in transitions in ErNi2B2C and TbNi2B2C

High resolution x-ray magnetic scattering has been used to determine the variation with temperature of the magnetic modulation vector, tau, in ErNi2B2C and TbNi2B2C to study the interplay between the weakly ferromagnetic (WFM) phase and proposed lock-in transitions in these materials. At temperatures below the WFM transitions, the modulation wave vectors are within the resolution limit of the commensurate values 11/20 and 6/11 for ErNi2B2C and TbNi2B2C, respectively.

cond-mat.str-el↗

Anisotropic magnetization, specific heat and resistivity of RFe2Ge2 single crystals

We have grown RFe2Ge2 single crystals for R = Y and ten members of the lanthanide series (Pr, Nd, Sm, Gd-Tm, Lu) using Sn flux as the solvent. The method yields clean, high quality crystal plates as evidenced by residual resistivities and RRR values in the range of 3-12 uOhm cm and 20-90 respectively. The crystals are also virtually free of magnetic impurities or secondary phases, allowing the study of the intrinsic anisotropic magnetic behavior of each compound. Characterization was made with X-Ray diffraction, and temperature and field dependent magnetization, specific heat and resistivity. Very strong anisotropies arising mostly from CEF effects were observed for all magnetic rare earths except Gd. Antiferromagnetic ordering occurred at temperatures between 16.5 K (Nd) and 1.1 K (Ho) that roughly scale with the de Gennes factor for the heavy rare earths. For some members there is also a lower temperature transition associated with changes in the magnetic structure. Tm did not order down to 0.4 K, and appears to be a van Vleck paramagnet. All members which ordered above 2 K showed a metamagnetic transition at 2 K for fields below 70 kOe. The calculated effective moments per rare earth atom are close to the expected free ion values of R^3+ except for Sm which displays anomalous behavior in the paramagnetic state. The non-magnetic members of this series (Y, Lu) are characterized by an unusually large electronic specific heat coefficient (gamma ~ 60 mJ/mol K^2) and temperature-independent susceptibility term (chi_0 ~ 0.003 emu/mol), indicative of a relatively large density of states at the Fermi surface.

cond-mat.str-el↗

Two band/two gap superconductivity in carbon-substituted MgB2 evidenced by point-contact spectroscopy

The Andreev reflection measurements of the superconducting energy gap in the carbon-substituted MgB$_2$ are presented. Despite the strong suppression of the transition temperature by 17 K in comparison with the pure MgB$_2$, the same reduced value of the small superconducting energy gap with $2Δ/kT_c \approx$ 1.7 has been systematically observed. This indicates that the two band/two gap superconductivity is still preserved here.

cond-mat.supr-con↗

Intra-granular Ti precipitates in MgB2

Superconducting magnesium diboride has been prepared with intra-granular TiB precipitates that have appropriate size and spacing for the pinning of superconducting vortices. The TiB particles have a size ranging from 1 nm to 20 nm and a spacing about 5 times as large. By co-depositing Ti and B on a commercial carbon coated silicon carbide substrate with chemical vapor deposition methods, it was possible to obtain a starting fiber with Ti well dispersed in the B. Reacting these fibers in a Mg vapor then transformed the fiber into a superconductor capable of carrying 10,000 A/cm^2 at 25K and 1 T. The Ti-B bonds are strong enough that there is relatively little migration of the Ti as the MgB2 grains form around the TiB precipitates. TiB2 precipitates, if they are present, can not be seen in the selected area diffraction pictures that show the TiB precipitates.

cond-mat.supr-con↗

CVD routes to MgB2 conductors

Processing methods are described for the development of magnesium diboride wire using the chemical vapor deposition (CVD) to produce long lengths of suitably doped starting boron fiber. It is found that titanium can be co-deposited with the boron to make long lengths of doped fiber that contain both TiB and TiB2. When this fiber is reacted in Mg vapor to transform boron into MgB2, the resulting conductor has a superconducting critical current density of about 5 times 10^6 A/cm^2 at 5K and self field. The critical current density at 25K and 1 Tesla is 10,000 A/cm^2. Using optical methods to define grain boundaries and energy dispersive X-rays to determine Ti and Mg concentration, these samples show a fine dispersion of $Ti$ through out the grains and no conspicuous precipitation of TiB2 on the MgB2 grain boundaries. This is to be contrasted with the precipitation of TiB2 on MgB2 grain boundaries observed for samples prepared by solid state reaction of Ti, Mg, and B powders. Introducing Ti impurities into the B during the CVD deposition of the B gives a distribution of TiB2 in the resulting MgB2 different from solid state reaction of powders.

cond-mat.supr-con↗

Titanium additions to MgB2 conductors

A series of doping experiments are reported for MgB2 conductors that have been synthesized using doped boron fibers prepared by chemical vapor deposition(CVD) methods. Undoped MgB2 samples prepared from CVD prepared fibers consistently give critical current densities, Jc, in the range of 500,000 A/cm^2 in low field at 5K. These values fall by a factor of about 100 as the magnetic field increases to 3T. For heavily Ti-doped boron fibers where the B/Ti ratio is comparable to 1, there is a substantial suppression of both Tc, superconducting volume fraction, and Jc values. If, however, a sample with a few percent Ti in B is deposited on a carbon coated SiC substrate and reacted at 1100 degrees C for 15 min, then Tc is suppressed only a couple of degrees Kelvin and critical current densities are found to be approximately 2-5 x 10^6 A/cm^2 for superconducting layers ranging from 4-10 micrometers thick. These materials show Jc values over 10,000 A/cm^2 at 25K and 1.3 T.

cond-mat.supr-con↗

Crystal Chemistry of Carbon-Substituted MgB2

Neutron powder diffraction has been used to characterize a sample of C-substituted MgB2 synthesized from Mg and B4C (with isotopically enriched 11B). The sample is multiphase, with the major phase [73.4(1) wt.%] being Mg(B1-xCx)2 with x=0.10(2). Minor phases include MgB2C2, Mg, and MgO. The major Mg(B1-xCx)2 phase displays diffraction peak widths as sharp as for pure MgB2, indicating good C homogeneity. There is no evidence for ordering of the substituted C atoms or distortion of the host structure other than contraction of the a axis and slight expansion of the c axis. The observed changes in lattice parameters vs. C concentration provide a means for estimating the C concentration in other Mg(B1-xCx)2 samples. The reduction in Tc resulting from 10% C substitution is much larger than previously reported, suggesting that previous reports of the C concentration in Mg(B1-xCx)2 are overestimated. The Mg site occupancy is determined to be 0.990(4) which is consistent with full Mg occupancy. Given these results, the stoichiometry Mg(B0.9C0.1)2 should be used by future attempts (band structural or otherwise) to explain (i) the dramatic suppression of Tc (Tc ~ = 22 K) and (ii) the persistence of the two-superconducting-gap feature in the specific heat data.

cond-mat.supr-con↗

An Overview of the Basic Physical Properties of MgB$_2$

The basic physical properties of MgB$_2$ have been well established over the past two years of intensive research. At this point there is a general consensus about the values for the isotope shift, critical fields, most of the salient length scales, and general anisotropies. In this paper we will review the determination of these parameters and set the stage for further, more detailed discussions of specific aspects of the physics of MgB$_2$.

cond-mat.supr-con↗

Anisotropy parameters of superconducting MgB$_2$

Data on macroscopic superconducting anisotropy of MgB$_2$ are reviewed. The data are described within a weak coupling two-gaps anisotropic s-wave model of superconductivity. The calculated ratio of the upper critical fields $γ_H=H_{c2,ab}/H_{c2,c}$ increases with decreasing temperature in agreement with available data, whereas the calculated ratio of London penetration depths $γ_λ=λ_c/λ_{ab}$ decreases to reach $\approx 1.1$ at T=0. Possible macroscopic consequences of $γ_λ\neγ_H$ are discussed.

cond-mat.supr-con↗

Effects of Boron Purity, Mg Stoichiometry and Carbon Substitution on Properties of Polycrystalline MgB$_{2}$

By synthesizing MgB$_{2}$ using boron of different nominal purity we found values of the residual resistivity ratio ($RRR = R(300 K) / R(42 K)$) from 4 to 20, which covers almost all values found in literature. To obtain high values of $RRR$, high purity reagents are necessary. With the isotopically pure boron we obtained the highest $RRR \sim$ 20 for the stoichiometric compound. We also investigated Mg$_{x}$$^{11}$B$_{2}$ samples with 0.8 $< x <$ 1.2. For the range Mg$_{0.8}$$^{11}$B$_{2}$ up to Mg$_{1.2}$$^{11}$B$_{2}$ we found average values of $RRR$ between 14 and 24. For smaller variations in stoichiometry ($x=1\pm 0.1$) $RRR = 18 \pm 3$. All of our data point to the conclusion that high $RRR$ ($\sim 20$) and low $ρ_{0}$ ($\leq 0.4 μΩcm$) are intrinsic material properties associated with high purity MgB$_{2}$. In addition we have performed initial work on optimizing the formation of carbon doped MgB$_{2}$ via the use of B$_{4}$C. Nearly single phase material can be formed by reaction of nominal Mg(B$_{0.8}$C$_{0.2}$)$_{2}$ for 24 hours at $1200^{\circ}C$. The $T_{c}$ for this composition is between $21.9 K$ and $22.7 K$ (depending on criterion).

cond-mat.supr-con↗

Synthesis and Properties of YbB2

We report temperature and field dependent measurements of the magnetic susceptibility, specific heat and resistivity of sintered YbB2 pellets, prepared via two distinct reaction routes, utilizing different temperatures, pressures and sintering times. Sample behavior is affected by the preparation procedure, as a consequence of different secondary phases, most of which were identified via x-ray diffraction. These experiments show that YbB2 is a metal with the Yb atoms in or very close to their 3+ state. YbB2 appears to order anti-ferromagnetically at TN ~ 5.6 K, which can be considered a relatively high ordering temperature for an ytterbium-based intermetallic compound.

cond-mat.str-el↗

Carbon doping of superconducting magnesium diboride

We present details of synthesis optimization and physical properties of nearly single phase carbon doped MgB2 with a nominal stoichiometry of Mg(B{0.8}C{0.2})2 synthesized from magnesium and boron carbide (B4C) as starting materials. The superconducting transition temperature is ~ 22 K (~ 17 K lower than in pure MgB2). The temperature dependence of the upper critical field is steeper than in pure MgB2 with Hc2(10K) ~ 9 T. Temperature dependent specific heat data taken in different applied magnetic fields suggest that the two-gap nature of superconductivity is still preserved for carbon doped MgB2 even with such a heavily suppressed transition temperature. In addition, the anisotropy ratio of the upper critical field for T/Tc ~ 2/3 is gamma ~ 2. This value is distinct from 1 (isotropic) and also distinct from 6 (the value found for pure MgB2).

cond-mat.supr-con↗

Observation of vortex structure in MgB$_2$ single crystals by Bitter decoration technique

We report the observation of superconducting vortices in pure and lightly Al doped MgB$_2$ single crystals. Low field experiments allow for the estimation of the London penetration depth, lambda ~ 1900 $Å$ for T$\sim$6 K. Experiments in higher fields (e.g. 200 Oe) clearly show a triangular vortex lattice in both real space (13 $μ$m by 13 $μ$m Bitter decoration image of over 1000 vortices) and reciprocal space.

cond-mat.supr-con↗

On the Influence of a Non-Local Electrodynamics in the Irreversible Magnetization of Non-Magnetic Borocarbides

We present an overview of the temperature, field and angular dependence of the irreversible magnetization of non-magnetic borocarbides (Y;Lu) Ni_2 B_2 C. We show that nonlocal electrodynamics influences pinning via the unusual behavior of the shear modulus in non-hexagonal lattices. On top of that, we observe that the pinning force density F_p exhibits a rich anisotropic behavior that sharply contrasts with its small mass anisotropy. When $H \bot c$, F_p is much larger and has a quite different H dependence, indicating that other pinning mechanisms are present.

cond-mat.supr-con↗

Drastic annealing effects in transport properties of single crystals of the YbNi2B2C heavy fermion system

We report temperature dependent resistivity, specific heat, magnetic susceptibility and thermoelectric power measurements made on the heavy fermion system YbNi2B2C, for both as grown and annealed single crystals. Our results demonstrate a significant variation in the temperature dependent electrical resistivity and thermoelectric power between as grown crystals and crystals that have undergone optimal (150 hour, 950 C) annealing, whereas the thermodynamic properties: (c_p(T) and chi(T)) remain almost unchanged. We interpret these results in terms of redistributions of local Kondo temperatures associated with ligandal disorder for a small (~ 1%) fraction of the Yb sites.

cond-mat.str-el↗

Anisotropy and large magnetoresistance in narrow gap semiconductor FeSb2

A study of the anisotropy in magnetic, transport and magnetotransport properties of FeSb2 has been made on large single crystals grown from Sb flux. Magnetic susceptibility of FeSb2 shows diamagnetic to paramagnetic crossover around 100K. Electrical transport along two axes is semiconducting whereas the third axis exhibits a metal - semiconductor crossover at temperature Tmin which is sensitive to current alignment and ranges between 40 and 80K. In H=70kOe semiconducting transport is restored for T<300K, resulting in large magnetoresistance [rho(70kOe)-rho(0)]/rho(0)=2200% in the crossover temperature range

cond-mat.str-el↗