arXiv subjects

Sascha R. Valentin

Publications and source records attributed to Sascha R. Valentin.

At least 19 recordsLinked to original sources

arXiv2026

High-fidelity entangled photon pairs from a quantum-dot-based single-photon source

Entangled photon pairs are a ubiquitous resource in quantum technologies, used in quantum key distribution and quantum networking as well as fundamental tests of non-locality. For scalable quantum networks, pairs that are indistinguishable in all unentangled degrees of freedom are essential, as they enable high-fidelity entanglement swapping across network nodes. To date the most-studied sources of "swappable" entangled photon pairs have been based on spontaneous parametric down-conversion (SPDC) in non-linear crystals. However, the probabilistic nature and unavoidable trade-off between brightness and unwanted multi-photon emission limits their performance in lossy channels. Here, we demonstrate a high-fidelity source of "swappable" entangled photon pairs using a semiconductor quantum dot (QD) coupled to a tunable microcavity. By actively modulating the QD emission between orthogonal polarisation states, delaying one path in a low-loss Herriott cell, and recombining the two on a balanced beam splitter, we generate entangled photon pairs with a fidelity of $96.1\pm0.5$ %. We identify and mitigate fidelity-limiting factors, achieving a maximum fidelity of $98.1\pm0.5$ % through time-resolved post-selection. The scheme suppresses residual multi-photon events concentrated near the excitation pulse and has only a modest impact on the rate. Furthermore, the photons are mutually indistinguishable, enabling efficient entanglement swapping. Our results establish semiconductor QDs as a viable platform for quantum network-compatible swappable entangled photon pair generation, with feasible entanglement generation rates exceeding 0.5 Gpairs/s.

quant-ph↗

arXiv2026

High-quality single photons from cavity-enhanced biexciton-to-exciton transition

Resonant laser excitation of a two-level system with subsequent single-photon emission can be used to generate single photons with high indistinguishability or Hong-Ou-Mandel (HOM) visibility. However, spectral overlap between excitation laser and emitted photons generally poses significant challenges. Furthermore, emitter re-excitation intrinsically limits achievable single-photon purity. Established solutions mitigate these issues at significant cost to source efficiency and with increased source complexity. This motivates the use of few-level systems with spectral separation of excitation and emission pathways. One option is a three-level cascade. However, without targeted lifetime engineering of emitting states, the cascade naturally limits achievable photon indistinguishability. Here we study a semiconductor quantum dot with resonant and selective cavity-enhancement of biexciton-to-exciton transition. Following resonant two-photon excitation of the biexciton state, we collect the emitted single photon with the cavity. This approach circumvents emitter re-excitation and naturally introduces spectral separation of excitation laser and emitted single photon. Supported by first experimental results, we demonstrate theoretically that with selective Purcell enhancement, the observed quality quantifiers of single-photon emission (purity, equivalently $g^{(2)}(0)$, and HOM visibility $\mathcal{V}$, equivalently indistinguishability) are competitive with respect to high-quality deterministic quantum-dot single-photon sources. This is already achieved without systematic optimization or targeted system engineering, which firmly places the reported approach as a viable route to the next generation of highest-quality quantum-dot based deterministic single-photon sources.

quant-ph↗

arXiv2026

Four-Photon Interference with a High-Efficiency Quantum Dot Source

While two-photon Hong-Ou-Mandel interference visibility has become a standard metric for single-photon sources, many optical quantum technologies require the generation and manipulation of larger photonic states. To date, efficiency limitations have prevented scaling quantum dot-based interference to the coalescence of more than two photons at a single beamsplitter. We overcome this limitation by combining a state-of-the-art quantum dot source with deterministic demultiplexing, enabling the direct observation of quantum interference fringes arising from up to four photons. We measure high mean interference contrasts of $93.0 \pm 0.1~\%$ for two photons, and $84.1 \pm 1.0~\%$ for four photons, with the complex fringe structure fully reproduced by a theoretical model. These results reveal the existence of "deep fringes" whose minima are unaffected by distinguishable photons, rendering the maximum contrast of four-photon interference highly sensitive to multi-photon emission but robust against photon distinguishability. We predict that these phenomena will extend to interference of larger numbers of photons, with relevance across a range of potential optical quantum technologies. A Fisher information analysis demonstrates that interference fringes from our source can exhibit phase sensitivity beyond the standard quantum limit, illustrating potential applications in quantum metrology.

quant-ph↗

arXiv2025

Indistinguishable photons from a two-photon cascade

Decay of a four-level diamond scheme via a cascade is a potential source of entangled photon pairs. A solid-state implementation is the biexciton cascade in a semiconductor quantum dot. While high entanglement fidelities have been demonstrated, the two photons, XX and X, are temporally correlated, typically resulting in poor photon coherence. Here, we demonstrate a high two-photon interference visibility (a measure of the photon coherence) for both XX (V=94$\pm$2%) and X (V=82$\pm$6%) photons. This is achieved by Purcell-enhancing the biexciton transition in a low-noise device. We find that the photon coherence follows the well-known quantum optics result upon tuning the XX:X lifetime ratio over two orders of magnitude.

quant-ph↗

arXiv2025

Towards quantitative understanding of quantum dot ensemble capacitance-voltage spectroscopy

Inhomogeneous ensembles of quantum dots (QDs) coupled to a charge reservoir are widely studied by using, e.g., electrical methods like capacitance-voltage spectroscopy. We present experimental measurements of the QD capacitance as a function of varying parameters such as ac frequency and bath temperature. The experiment reveals distinct shifts in the position of the capacitance peaks. While temperature-induced shifts have been explained by previous models, the observation of frequency-dependent shifts has not been explained so far. Given that existing models fall short in explaining these phenomena, we propose a refined theoretical model based on a master equation approach which incorporates energy-dependent tunneling effects. This approach successfully reproduces the experimental data. We highlight the critical role of energy-dependent tunneling in two distinct regimes: at low temperatures, ensemble effects arising from energy-level dispersion in differently sized QDs dominate the spectral response; at high temperatures and frequencies, we observe a peak shift of a different nature, which is best described by optimizing the conjoint probability of successive in- and out-tunneling events. Our findings contribute to a deeper understanding of tunnel processes and the physical properties of QD ensembles coupled to a common reservoir, with implications for their development in applications such as single-photon sources and spin qubits.

cond-mat.mes-hall↗

arXiv2024

Realisation of a Coherent and Efficient One-Dimensional Atom

A quantum emitter interacting with photons in a single optical-mode constitutes a one-dimensional atom. A coherent and efficiently coupled one-dimensional atom provides a large nonlinearity, enabling photonic quantum gates. Achieving a high coupling efficiency ($β$-factor) and low dephasing is challenging. Here, we use a semiconductor quantum dot in an open microcavity as an implementation of a one-dimensional atom. With a weak laser input, we achieve an extinction of $99.2\%$ in transmission and a concomitant bunching in the photon statistics of $g^{(2)}(0) = 587$, showcasing the reflection of the single-photon component and the transmission of the multi-photon components of the coherent input. The tunable nature of the microcavity allows $β$ to be adjusted and gives control over the photon statistics -- from strong bunching to anti-bunching -- and the phase of the transmitted photons. We obtain excellent agreement between experiment and theory by going beyond the single-mode Jaynes-Cummings model. Our results pave the way towards the creation of exotic photonic states and two-photon phase gates.

quant-ph↗

arXiv2023

Cavity-enhanced excitation of a quantum dot in the picosecond regime

A major challenge in generating single photons with a single emitter is to excite the emitter while avoiding laser leakage into the collection path. Ideally, any scheme to suppress this leakage should not result in a loss in efficiency of the single-photon source. Here, we investigate a scheme in which a single emitter, a semiconductor quantum dot, is embedded in a microcavity. The scheme exploits the splitting of the cavity mode into two orthogonally-polarised modes: one mode is used for excitation, the other for collection. By linking experiment to theory, we show that the best population inversion is achieved with a laser pulse detuned from the quantum emitter. The Rabi oscillations have an unusual dependence on pulse power. Our theory describes them quantitatively allowing us to determine the absolute photon creation probability. For the optimal laser detuning, the population innversion is 98\%. The Rabi oscillations depend on the sign of the laser-pulse detuning. We show that this arises from the non-trivial effect of phonons on the exciton dynamics. The exciton-phonon interaction is included in the theory and gives excellent agreement with all the experimental results.

quant-ph↗

arXiv2022

Direct observation of photon bound states using a single artificial atom

The interaction between photons and a single two-level atom constitutes a fundamental paradigm in quantum physics. The nonlinearity provided by the atom means that the light-matter interaction depends strongly on the number of photons interacting with the two-level system within its emission lifetime. This nonlinearity results in the unveiling of strongly correlated quasi-particles known as photon bound states, giving rise to key physical processes such as stimulated emission and soliton propagation. While signatures consistent with the existence of photon bound states have been measured in strongly interacting Rydberg gases, their hallmark excitation-number-dependent dispersion and propagation velocity have not yet been observed. Here, we report the direct observation of a photon-number-dependent time delay in the scattering off a single semiconductor quantum dot coupled to an optical cavity. By scattering a weak coherent pulse off the cavity-QED system and measuring the time-dependent output power and correlation functions, we show that single photons, and two- and three-photon bound states incur different time delays of 144.02\,ps, 66.45\,ps and 45.51\,ps respectively. The reduced time delay of the two-photon bound state is a fingerprint of the celebrated example of stimulated emission, where the arrival of two photons within the lifetime of an emitter causes one photon to stimulate the emission of the other from the atom.

quant-ph↗

arXiv2021

A chiral one-dimensional atom using a quantum dot in an open microcavity

In nanostructures, the light-matter interaction can be engineered to be chiral. In the fully quantum regime, a chiral one-dimensional atom, a photon propagating in one direction interacts with the atom; a photon propagating in the other direction does not. Chiral quantum optics has applications in creating nanoscopic single-photon routers, circulators, phase-shifters and two-photon gates. Furthermore, the directional photon-exchange between many emitters in a chiral system may enable the creation of highly exotic quantum states. Here, we present a new way of implementing chiral quantum optics $-$ we use a low-noise quantum dot in an open microcavity. Specifically, we demonstrate the non-reciprocal absorption of single photons, a single-photon diode. The non-reciprocity, the ratio of the transmission in the forward-direction to the transmission in the reverse direction, is as high as 10.7 dB, and is optimised $\textit{in situ}$ by tuning the photon-emitter coupling to the optimal operating condition ($β= 0.5$). Proof that the non-reciprocity arises from a single quantum emitter lies in the nonlinearity with increasing input laser power, and in the photon statistics $-$ ultralow-power laser light propagating in the diode's reverse direction results in a highly bunched output ($g^{(2)}(0) = 101$), showing that the single-photon component is largely removed. The results pave the way to a single-photon phase shifter, and, by exploiting a quantum dot spin, to two-photon gates and quantum non-demolition single-photon detectors.

quant-ph↗

arXiv2021

Tuning the mode-splitting of a semiconductor microcavity with uniaxial stress

A splitting of the fundamental optical modes in micro/nano-cavities comprising semiconductor heterostructures is commonly observed. Given that this splitting plays an important role for the light-matter interaction and hence quantum technology applications, a method for controlling the mode-splitting is important. In this work we use an open microcavity composed of a "bottom" semiconductor distributed Bragg reflector (DBR) incorporating an n-i-p heterostructure, paired with a "top" curved dielectric DBR. We measure the mode-splitting as a function of wavelength across the stopband. We demonstrate a reversible in-situ technique to tune the mode-splitting by applying uniaxial stress to the semiconductor DBR. The method exploits the photoelastic effect of the semiconductor materials. We achieve a maximum tuning of $\sim$11 GHz. The stress applied to the heterostructure is determined by observing the photoluminescence of quantum dots embedded in the sample, converting a spectral shift to a stress via deformation potentials. A thorough study of the mode-splitting and its tuning across the stop-band leads to a quantitative understanding of the mechanism behind the results.

physics.optics↗

arXiv2021

Suppression of surface-related loss in a gated semiconductor microcavity

We present a surface passivation method that reduces surface-related losses by almost two orders of magnitude in a highly miniaturized GaAs open microcavity. The microcavity consists of a curved dielectric distributed Bragg reflector (DBR) with radius $\sim 10$ $μ$m paired with a GaAs-based heterostructure. The heterostructure consists of a semiconductor DBR followed by an n-i-p diode with a layer of quantum dots in the intrinsic region. Free-carrier absorption in the highly doped n- and p-layers is minimized by positioning them close to a node of the vacuum electromagnetic-field. The surface, however, resides at an anti-node of the vacuum field and results in significant loss. These losses are much reduced by surface passivation. The strong dependence on wavelength implies that the main effect of the surface passivation is to eliminate the surface electric field, thereby quenching below-bandgap absorption via a Franz-Keldysh-like effect. An additional benefit is that the surface passivation reduces scattering at the GaAs surface. These results are important in other nano-photonic devices which rely on a GaAs-vacuum interface to confine the electromagnetic field.

physics.optics↗

arXiv2020

A bright and fast source of coherent single photons

A single photon source is a key enabling technology in device-independent quantum communication, quantum simulation for instance boson sampling, linear optics-based and measurement-based quantum computing. These applications involve many photons and therefore place stringent requirements on the efficiency of single photon creation. The scaling on efficiency is an exponential function of the number of photons. Schemes taking full advantage of quantum superpositions also depend sensitively on the coherence of the photons, i.e. their indistinguishability. It is therefore crucial to maintain the coherence over long strings of photons. Here, we report a single photon source with an especially high system efficiency: a photon is created on-demand at the output of the final optical fibre with a probability of 57%. The coherence of the photons is very high and is maintained over a stream consisting of thousands of photons; the repetition rate is in the GHz regime. We break with the established semiconductor paradigms, such as micropillars, photonic crystal cavities and waveguides. Instead, we employ gated quantum dots in an open, tunable microcavity. The gating ensures low-noise operation; the tunability compensates for the lack of control in quantum dot position and emission frequency; the output is very well-matched to a single-mode fibre. An increase in efficiency over the state-of-the-art by more than a factor of two, as reported here, will result in an enormous decrease in run-times, by a factor of $10^{7}$ for 20 photons.

quant-ph↗

arXiv2019

Full Counting Statistics of Spin-Flip/Conserving Charge Transitions in Pauli-Spin Blockade

We investigate the full counting statistics (FCS) of spin-conserving and spin-flip charge transitions in Pauli-spin blockade regime of a GaAs double quantum dot. A theoretical model is proposed to evaluate all spin-conserving and spin-flip tunnel rates, and to demonstrate the fundamental relation between FCS and waiting time distribution. We observe the remarkable features of parity effect and a tail structure in the constructed FCS, which do not appear in the Poisson distribution, and are originated from spin degeneracy and coexistence of slow and fast transitions, respectively. This study is potentially useful for elucidating the spin-related and other complex transition dynamics in quantum systems.

cond-mat.mes-hall↗

arXiv2018

A gated quantum dot far in the strong-coupling regime of cavity-QED at optical frequencies

The strong-coupling regime of cavity-quantum-electrodynamics (cQED) represents light-matter interaction at the fully quantum level. Adding a single photon shifts the resonance frequencies, a profound nonlinearity. cQED is a test-bed of quantum optics and the basis of photon-photon and atom-atom entangling gates. At microwave frequencies, success in cQED has had a transformative effect. At optical frequencies, the gates are potentially much faster and the photons can propagate over long distances and be easily detected, ideal features for quantum networks. Following pioneering work on single atoms, solid-state implementations are important for developing practicable quantum technology. Here, we embed a semiconductor quantum dot in a microcavity. The microcavity has a $\mathcal{Q}$-factor close to $10^{6}$ and contains a charge-tunable quantum dot with close-to-transform-limited optical linewidth. The exciton-photon coupling rate $g$ exceeds both the photon decay rate $κ$ and exciton decay rate $γ$ by a large margin ($g/γ=14$, $g/κ=5.3$); the cooperativity is $C=2g^{2}/(γκ)=150$, the $β$-factor 99.7%. We observe pronounced vacuum Rabi oscillations in the time-domain, photon blockade at a one-photon resonance, and highly bunched photon statistics at a two-photon resonance. We use the change in photon statistics as a sensitive spectral probe of transitions between the first and second rungs of the Jaynes-Cummings ladder. All experiments can be described quantitatively with the Jaynes-Cummings model despite the complexity of the solid-state environment. We propose this system as a platform to develop optical-cQED for quantum technology, for instance a photon-photon entangling gate.

quant-ph↗

arXiv2018

Quantum state transfer of angular momentum via single electron photo-excitation from a Zeeman-resolved light hole

Electron spins in GaAs quantum dots have been used to make qubits with high-fidelity gating and long coherence time, necessary ingredients in solid-state quantum computing. The quantum dots can also host photon qubits with energy applicable for optical communication, and can show a promising photon-to-spin conversion. The coherent interface is established through photo-excitation of a single pair of an electron and a Zeeman-resolved light-hole, not heavy-hole. However, no experiments on the single photon to spin conversion have been performed yet. Here we report on single shot readout of a single electron spin generated in a GaAs quantum dot by spin-selective excitation with linearly polarized light. A photo-electron spin generated from a Zeeman-resolved light-hole exciton is detected using an optical spin blockade method in a single quantum dot and a Pauli spin blockade method in a double quantum dot. We found that the blockade probability strongly depends on the photon polarization and the hole state, heavy- or light-hole, indicating a transfer of the angular momentum from single photons to single electron spins. Our demonstration will open a pathway to further investigation on fundamental quantum physics such as quantum entanglement between a wide variety of quantum systems and applications of quantum networking technology.

cond-mat.mes-hall↗

arXiv2017

Illumination-induced nonequilibrium charge states in self-assembled quantum dots

We report on capacitance-voltage spectroscopy of self-assembled InAs quantum dots under constant illumination. Besides the electronic and excitonic charging peaks in the spectrum reported earlier, we find additional resonances associated with nonequilibrium state tunneling unseen in C(V) measurements before. We derive a master-equation based model to assign the corresponding quantum state tunneling to the observed peaks. C(V) spectroscopy in a magnetic field is used to verify the model-assigned nonequilibrium peaks. The model is able to quantitatively address various experimental findings in C(V) spectroscopy of quantum dots such as the frequency and illumination dependent peak height, a thermal shift of the tunneling resonances and the occurrence of the additional nonequilibrium peaks.

cond-mat.mes-hall↗

arXiv2017

Coherent and robust high-fidelity generation of a biexciton in a quantum dot by rapid adiabatic passage

A biexciton in a semiconductor quantum dot is a source of polarization-entangled photons with high potential for implementation in scalable systems. Several approaches for non-resonant, resonant and quasi-resonant biexciton preparation exist, but all have their own disadvantages, for instance low fidelity, timing jitter, incoherence or sensitivity to experimental parameters. We demonstrate a coherent and robust technique to generate a biexciton in an InGaAs quantum dot with a fidelity close to one. The main concept is the application of rapid adiabatic passage to the ground state-exciton-biexciton system. We reinforce our experimental results with simulations which include a microscopic coupling to phonons.

cond-mat.mes-hall↗

arXiv2017

Demonstrating the decoupling regime of the electron-phonon interaction in a quantum dot using chirped optical excitation

Excitation of a semiconductor quantum dot with a chirped laser pulse allows excitons to be created by rapid adiabatic passage. In quantum dots this process can be greatly hindered by the coupling to phonons. Here we add a high chirp rate to ultra-short laser pulses and use these pulses to excite a single quantum dot. We demonstrate that we enter a regime where the exciton-phonon coupling is effective for small pulse areas, while for higher pulse areas a decoupling of the exciton from the phonons occurs. We thus discover a reappearance of rapid adiabatic passage, in analogy to the predicted reappearance of Rabi rotations at high pulse areas. The measured results are in good agreement with theoretical calculations.

cond-mat.mes-hall↗