arXiv subjects

Shaodan Ma

Publications and source records attributed to Shaodan Ma.

At least 37 records · Page 2Linked to original sources

arXiv2025

Active IRS Assisted Joint Uplink and Downlink Communications

In this paper, we investigate an intelligent reflecting surface (IRS) aided wireless communication system, where active IRSs (AIRSs) are deployed to assist communication between a base station (BS) and users of both the uplink (UL) and downlink (DL). We aim to maximize the weighted sum rate (WSR) of UL and DL communications through joint optimization of BS, AIRS beamforming, and AIRS element allocation. First, we study three deployment schemes, namely distributed AIRSs, BS-side AIRS, and user-side AIRS. For distributed AIRSs, both optimal and near-optimal solutions are derived in closed form. To draw useful insights, we analytically compare the deployment schemes in terms of the rate performance under the single-user setup. For the multi-user case, we consider two beamforming setups at the distributed AIRSs to balance performance and complexity tradeoffs. Regarding the user-adaptive AIRS beamforming, different AIRS beamforming vectors are adopted for each user; while for the static AIRS beamforming, all users share the same beamforming vectors, with identical phase shifts but different amplitudes for UL and DL. With the user-adaptive AIRS beamforming, we focus on the optimization of element allocation for rate maximization. With static AIRS beamforming, we solve the rate maximization problem by optimizing the BS transmit/receive beamformers, user beamforming, and AIRS beamforming. Despite its non-convexity, we develop an efficient alternating optimization (AO) based algorithm that solves each sub-problem optimally. Numerical results validate the practical advantages of distributed AIRSs compared to passive IRS (PIRS), BS-side AIRS, and user-side AIRS, and highlight the benefits of dynamic IRS beamforming.

eess.SP↗

arXiv2025

Bridge Micro-Deformation Monitoring Scheme with Integrated Sensing and Communications

In this paper, we propose a novel integrated sensing and communications (ISAC) scheme to perform bridge micro-deformation monitoring (BMDM) in complex environments. We first provide an excitation-bridge coupling model to represent the micro-deformation process of the bridge. Next, we design a novel frame structure for BMDM applications, and construct the OFDM echo channel model for basic scene of BMDM, including micro-deformation, dynamic objects, and static environment. Then, we develop a phasor statistical analysis method based on average cancellation algorithm to suppress the interference of dynamic objects, as well as a circle fitting method based on least squares algorithm to remove the interference of static environment near the monitoring area. Furthermore, we extract the micro-deformation feature vector from the OFDM echo signals after inverse discrete fourier transform (IDFT), and derive vertical micro-deformation value with the time-frequency phase resources. Simulation results demonstrate the effectiveness of the proposed BMDM scheme and its robustness against both dynamic interferences and static interferences.

eess.SP↗

arXiv2025

Flexible XL-MIMO via Array Configuration Codebook: Codebook Design and Array Configuration Training

XL-MIMO emerges as a promising technology to achieve unprecedented enhancements in spectral efficiency and spatial resolution, via orders-of-magnitude increase in the antenna array size. However, the practical issues of high hardware cost and power consumption pose great challenges towards the cost-effective implementation of XL-MIMO. To address such challenges, this paper proposes a novel concept called array configuration codebook (ACC), which enables flexible XL-MIMO cost-effectively and improves the system performance compared with conventional antenna selection (AS) schemes with limited number of RF chains. Specifically, ACC refers to a set of pre-designed array configuration codewords, where each codeword specifies the positions of activated antenna pixels. Then, flexible XL-MIMO architecture can be enabled via dynamical pixel activation based on the designed ACC, without having to exhaustively try all possible combinations of the antenna pixels activations. As an illustration, we give a specific codebook design, encompassing the classic compact array (CA), uniform sparse array (USA), modular array (MoA), nested array (NA), and co-prime array (CPA), and each codeword is specified by one array configuration parameter. With the designed ACC, array configuration training is considered for multi-UE communication to maximize the sum rate. To reduce the training overhead of exhaustive scanning, a two-stage scanning scheme is proposed, including the array- and pixel-level scanning. For comparison, the greedy AS scheme is proposed, where the resulting incremental SINR expression by activating antenna pixel sequentially is derived in closed-form. Subsequently, array configuration training is extended to the wireless localization scenario. Simulation results demonstrate the effectiveness of codeword optimization for scenarios of multi-UE communication and wireless localization.

cs.IT↗

arXiv2025

When Feedback Empowers the Uplink: Integrating Adaptive Coding with Wireless Power Transfer

Energy consumption and device lifetime are critical concerns for battery-constrained IoT devices. This paper introduces the Feedback-Aided Coding and Energy Transfer (FACET) framework, which synergistically combines adaptive feedback channel coding with wireless power transfer. FACET leverages the saturation effect of feedback coding, where increasing downlink power yields diminishing returns, to design a dual-purpose feedback mechanism that simultaneously guides uplink coding and replenishes device energy. We characterize the inherent tradeoff between feedback precision and harvested power, and formulate a fairness-constrained min-max optimization problem to minimize worst-case net energy consumption. An efficient algorithm based on alternating optimization and Lagrangian duality is developed, with each subproblem admitting a closed-form solution. Simulations show that FACET nearly triples device lifetime compared to conventional feedback coding architectures, and remains robust across a wide range of power regimes. These results suggest that FACET not only improves communication efficiency but also redefines the role of feedback in energy-constrained IoT systems.

cs.IT↗

arXiv2025

Reconfigurable Codebook-Based Beamforming for RDARS-Aided mmWave MU-MIMO Systems

Reconfigurable distributed antenna and reflecting surface (RDARS) is a new architecture for the sixth-generation (6G) millimeter wave (mmWave) communications. In RDARS-aided mmWave systems, the active and passive beamforming design and working mode configuration for reconfigurable elements are crucial for system performance. In this paper, we aim to maximize the weighted sum rate (WSR) in the RDARS-aided mmWave system. To take advantage of RDARS, we first design a reconfigurable codebook (RCB) in which the number and dimension of the codeword can be flexibly adjusted. Then, a low overhead beam training scheme based on hierarchical search is proposed. Accordingly, the active and passive beamforming for data transmission is designed to achieve the maximum WSR for both space-division multiple access (SDMA) and time-division multiple access (TDMA) schemes. For the TDMA scheme, the optimal number of RDARS transmit elements and the allocated power budget for WSR maximization are derived in closed form. Besides, the superiority of the RDARS is verified and the conditions under which RDARS outperforms RIS and DAS are given. For the SDMA scheme, we characterize the relationship between the number of RDARS connected elements and the user distribution, followed by the derivation of the optimal placement positions of the RDARS transmit elements. High-quality beamforming design solutions are derived to minimize the inter-user interference (IUI) at the base station and RDARS side respectively, which nearly leads to the maximal WSR. Finally, simulation results confirm our theoretical findings and the superiority of the proposed schemes.

eess.SP↗

arXiv2025

Power Allocation for Coordinated Multi-Point Aided ISAC Systems

In this letter, we investigate a coordinated multiple point (CoMP)-aided integrated sensing and communication (ISAC) system that supports multiple users and targets. Multiple base stations (BSs) employ a coordinated power allocation strategy to serve their associated single-antenna communication users (CUs) while utilizing the echo signals for joint radar target (RT) detection. The probability of detection (PoD) of the CoMP-ISAC system is then proposed for assessing the sensing performance. To maximize the sum rate while ensuring the PoD for each RT and adhering to the total transmit power budget across all BSs, we introduce an efficient power allocation strategy. Finally, simulation results are provided to validate the analytical findings, demonstrating that the proposed power allocation scheme effectively enhances the sum rate while satisfying the sensing requirements.

cs.IT↗

arXiv2025

Wireless Communication with Flexible Reflector: Joint Placement and Rotation Optimization for Coverage Enhancement

Passive metal reflectors for communication enhancement have appealing advantages such as ultra low cost, zero energy expenditure, maintenance-free operation, long life span, and full compatibility with legacy wireless systems. To unleash the full potential of passive reflectors for wireless communications, this paper proposes a new passive reflector architecture, termed flexible reflector (FR), for enabling the flexible adjustment of beamforming direction via the FR placement and rotation optimization. We consider the multi-FR aided area coverage enhancement and aim to maximize the minimum expected receive power over all locations within the target coverage area, by jointly optimizing the placement positions and rotation angles of multiple FRs. To gain useful insights, the special case of movable reflector (MR) with fixed rotation is first studied to maximize the expected receive power at a target location, where the optimal single-MR placement positions for electrically large and small reflectors are derived in closed-form, respectively. It is shown that the reflector should be placed at the specular reflection point for electrically large reflector. While for area coverage enhancement, the optimal placement is obtained for the single-MR case and a sequential placement algorithm is proposed for the multi-MR case. Moreover, for the general case of FR, joint placement and rotation design is considered for the single-/multi-FR aided coverage enhancement, respectively. Numerical results are presented which demonstrate significant performance gains of FRs over various benchmark schemes under different practical setups in terms of receive power enhancement.

cs.IT↗

arXiv2025

Joint Size and Placement Optimization for IRS-Aided Communications with Active and Passive Elements

Different types of intelligent reflecting surfaces (IRS) are exploited for assisting wireless communications. The joint use of passive IRS (PIRS) and active IRS (AIRS) emerges as a promising solution owing to their complementary advantages. They can be integrated into a single hybrid active-passive IRS (HIRS) or deployed in a distributed manner, which poses challenges in determining the IRS element allocation and placement for rate maximization. In this paper, we investigate the capacity of an IRS-aided wireless communication system with both active and passive elements. Specifically, we consider three deployment schemes: 1) base station (BS)-HIRS-user (BHU); 2) BS-AIRS-PIRS-user (BAPU); 3) BS-PIRS-AIRS-user (BPAU). Under the line-of-sight channel model, we formulate a rate maximization problem via a joint optimization of the IRS element allocation and placement. We first derive the optimized number of active and passive elements for BHU, BAPU, and BPAU schemes, respectively. Then, low-complexity HIRS/AIRS placement strategies are provided. To obtain more insights, we characterize the system capacity scaling orders for the three schemes with respect to the large total number of IRS elements, amplification power budget, and BS transmit power. Finally, simulation results are presented to validate our theoretical findings and show the performance difference among the BHU, BAPU, and BPAU schemes with the proposed joint design under various system setups.

eess.SP↗

arXiv2025

Secure Communication in Dynamic RDARS-Driven Systems

In this letter, we investigate a dynamic reconfigurable distributed antenna and reflection surface (RDARS)-driven secure communication system, where the working mode of the RDARS can be flexibly configured. We aim to maximize the secrecy rate by jointly designing the active beamforming vectors, reflection coefficients, and the channel-aware mode selection matrix. To address the non-convex binary and cardinality constraints introduced by dynamic mode selection, we propose an efficient alternating optimization (AO) framework that employs penalty-based fractional programming (FP) and successive convex approximation (SCA) transformations. Simulation results demonstrate the potential of RDARS in enhancing the secrecy rate and show its superiority compared to existing reflection surface-based schemes.

cs.IT↗

arXiv2025

Joint Beamforming Optimization and Mode Selection for RDARS-Aided MIMO Systems

Reconfigurable intelligent surface (RIS) has emerged as a cost-effective solution for green communications in 6G. However, its further extensive use has been greatly limited due to its fully passive characteristics. Considering the appealing distribution gains of distributed antenna systems (DAS), a flexible reconfigurable architecture called reconfigurable distributed antenna and reflecting surface (RDARS) is proposed. RDARS encompasses DAS and RIS as two special cases and maintains the advantages of distributed antennas while reducing the hardware cost by replacing some active antennas with low-cost passive reflecting surfaces. In this paper, we present a RDARS-aided uplink multi-user communication system and investigate the system transmission reliability with the newly proposed architecture. Specifically, in addition to the distribution gain and the reflection gain provided by the connection and reflection modes, respectively, we also consider the dynamic mode switching of each element which introduces an additional degree of freedom (DoF) and thus results in a selection gain. As such, we aim to minimize the total sum mean-square-error (MSE) of all data streams by jointly optimizing the receive beamforming matrix, the reflection phase shifts and the channel-aware placement of elements in the connection mode. Numerical results demonstrate the superiority of the proposed architecture compared to the conventional fully passive RIS or DAS. Furthermore, some insights about the practical implementation of RDARS are provided.

cs.IT↗

arXiv2024

Low-Overhead Channel Estimation via 3D Extrapolation for TDD mmWave Massive MIMO Systems Under High-Mobility Scenarios

In time division duplexing (TDD) millimeter wave (mmWave) massive multiple-input multiple-output (MIMO) systems, downlink channel state information (CSI) can be obtained from uplink channel estimation thanks to channel reciprocity. However, under high-mobility scenarios, frequent uplink channel estimation is needed due to channel aging. Additionally, large amounts of antennas and subcarriers result in high-dimensional CSI matrices, aggravating pilot training overhead. To address this, we propose a three-domain (3D) channel extrapolation framework across spatial, frequency, and temporal domains. First, considering the effectiveness of traditional knowledge-driven channel estimation methods and the marginal effects of pilots in the spatial and frequency domains, a knowledge-and-data driven spatial-frequency channel extrapolation network (KDD-SFCEN) is proposed for uplink channel estimation via joint spatial-frequency channel extrapolation to reduce spatial-frequency domain pilot overhead. Then, leveraging channel reciprocity and temporal dependencies, we propose a temporal uplink-downlink channel extrapolation network (TUDCEN) powered by generative artificial intelligence for slot-level channel extrapolation, aiming to reduce the tremendous temporal domain pilot overhead caused by high mobility. Numerical results demonstrate the superiority of the proposed framework in significantly reducing the pilot training overhead by 16 times and improving the system's spectral efficiency under high-mobility scenarios compared with state-of-the-art channel estimation/extrapolation methods.

eess.SP↗

arXiv2024

Throughput Maximization for UAV-enabled Integrated Periodic Sensing and Communication

Unmanned aerial vehicle (UAV) is expected to revolutionize the existing integrated sensing and communication (ISAC) system and promise a more flexible joint design. Nevertheless, the existing works on ISAC mainly focus on exploring the performance of both functionalities simultaneously during the entire considered period, which may ignore the practical asymmetric sensing and communication requirements. In particular, always forcing sensing along with communication may make it is harder to balance between these two functionalities due to shared spectrum resources and limited transmit power. To address this issue, we propose a new integrated periodic sensing and communication mechanism for the UAV-enabled ISAC system to provide a more flexible trade-off between two integrated functionalities. Specifically, the system achievable rate is maximized via jointly optimizing UAV trajectory, user association, target sensing selection, and transmit beamforming, while meeting the sensing frequency and beam pattern gain requirement for the given targets. Despite that this problem is highly non-convex and involves closely coupled integer variables, we derive the closed-form optimal beamforming vector to dramatically reduce the complexity of beamforming design, and present a tight lower bound of the achievable rate to facilitate UAV trajectory design. Based on the above results, we propose a penalty-based algorithm to efficiently solve the considered problem. The optimal achievable rate and the optimal UAV location are analyzed under a special case of infinity number of antennas. Furthermore, we prove the structural symmetry between the optimal solutions in different ISAC frames without location constraints and propose an efficient algorithm for solving the problem with location constraints.

cs.IT↗

arXiv2024

Robust Beamforming Design and Antenna Selection for Dynamic HRIS-aided MISO System

In this paper, we propose a dynamic hybrid active-passive reconfigurable intelligent surface (HRIS) to enhance multiple-input-single-output (MISO) communications, leveraging the property of dynamically placing active elements. Specifically, considering the impact of hardware impairments (HWIs), we investigate channel-aware configurations of the receive antennas at the base station (BS) and the active/passive elements at the HRIS to improve transmission reliability. To this end, we address the average mean-square-error (MSE) minimization problem for the HRIS-aided MISO system by jointly optimizing the BS receive antenna selection matrix, the reflection phase coefficients, the reflection amplitude matrix, and the mode selection matrix of the HRIS. To overcome the non-convexity and intractability of this problem, we first transform the binary and discrete variables into continuous ones, and then propose a penalty-based exact block coordinate descent (PEBCD) algorithm to alternately solve these subproblems. Numerical simulations demonstrate the significant superiority of our proposed scheme over conventional benchmark schemes.

cs.IT↗

arXiv2024

AI/ML for Beam Management in 5G-Advanced: A Standardization Perspective

In beamformed wireless cellular systems such as 5G New Radio (NR) networks, beam management (BM) is a crucial operation. In the second phase of 5G NR standardization, known as 5G-Advanced, which is being vigorously promoted, the key component is the use of artificial intelligence (AI) based on machine learning (ML) techniques. AI/ML for BM is selected as a representative use case. This article provides an overview of the AI/ML for BM in 5G-Advanced. The legacy non-AI and prime AI-enabled BM frameworks are first introduced and compared. Then, the main scope of AI/ML for BM is presented, including improving accuracy, reducing overhead and latency. Finally, the key challenges and open issues in the standardization of AI/ML for BM are discussed, especially the design of new protocols for AI-enabled BM. This article provides a guideline for the study of AI/ML-based BM standardization.

cs.IT↗

arXiv2024

Variational Bayesian Learning based Joint Localization and Path Loss Exponent with Distance-dependent Noise in Wireless Sensor Network

This paper focuses on the challenge of jointly optimizing location and path loss exponent (PLE) in distance-dependent noise. Departing from the conventional independent noise model used in localization and path loss exponent estimation problems, we consider a more realistic model incorporating distance-dependent noise variance, as revealed in recent theoretical analyses and experimental results. The distance-dependent noise introduces a complex noise model with unknown noise power and PLE, resulting in an exceptionally challenging non-convex and nonlinear optimization problem. In this study, we address a joint localization and path loss exponent estimation problem encompassing distance-dependent noise, unknown parameters, and uncertainties in sensor node locations. To surmount the intractable nonlinear and non-convex objective function inherent in the problem, we introduce a variational Bayesian learning-based framework that enables the joint optimization of localization, path loss exponent, and reference noise parameters by leveraging an effective approximation to the true posterior distribution. Furthermore, the proposed joint learning algorithm provides an iterative closed-form solution and exhibits superior performance in terms of computational complexity compared to existing algorithms. Computer simulation results demonstrate that the proposed algorithm approaches the performance of the Bayesian Cramer-Rao bound (BCRB), achieves localization performance comparable to the (maximum likelihood-Gaussian message passing) ML-GMP algorithm in some cases, and outperforms the other comparison algorithm in all cases.

eess.SP↗

arXiv2024

Multi-Functional Beamforming Design for Integrated Sensing, Communication, and Computation

Integrated sensing and communication (ISAC) systems may face a heavy computation burden since the sensory data needs to be further processed. This paper studies a novel system that integrates sensing, communication, and computation, aiming to provide services for different objectives efficiently. This system consists of a multi-antenna multi-functional base station (BS), an edge server, a target, and multiple singleantenna communication users. The BS needs to allocate the available resources to efficiently provide sensing, communication, and computation services. Due to the heavy service burden and limited power budget, the BS can partially offload the tasks to the nearby edge server instead of computing them locally. We consider the estimation of the target response matrix, a general problem in radar sensing, and utilize Cramer-Rao bound (CRB) as the corresponding performance metric. To tackle the non-convex optimization problem, we propose both semidefinite relaxation (SDR)-based alternating optimization and SDR-based successive convex approximation (SCA) algorithms to minimize the CRB of radar sensing while meeting the requirement of communication users and the need for task computing. Furthermore, we demonstrate that the optimal rankone solutions of both the alternating and SCA algorithms can be directly obtained via the solver or further constructed even when dealing with multiple functionalities. Simulation results show that the proposed algorithms can provide higher target estimation performance than state-of-the-art benchmarks while satisfying the communication and computation constraints.

eess.SP↗

arXiv2024

A Low-Overhead Incorporation-Extrapolation based Few-Shot CSI Feedback Framework for Massive MIMO Systems

Accurate channel state information (CSI) is essential for downlink precoding in frequency division duplexing (FDD) massive multiple-input multiple-output (MIMO) systems with orthogonal frequency-division multiplexing (OFDM). However, obtaining CSI through feedback from the user equipment (UE) becomes challenging with the increasing scale of antennas and subcarriers and leads to extremely high CSI feedback overhead. Deep learning-based methods have emerged for compressing CSI but these methods generally require substantial collected samples and thus pose practical challenges. Moreover, existing deep learning methods also suffer from dramatically growing feedback overhead owing to their focus on full-dimensional CSI feedback. To address these issues, we propose a low-overhead Incorporation-Extrapolation based Few-Shot CSI feedback Framework (IEFSF) for massive MIMO systems. An incorporation-extrapolation scheme for eigenvector-based CSI feedback is proposed to reduce the feedback overhead. Then, to alleviate the necessity of extensive collected samples and enable few-shot CSI feedback, we further propose a knowledge-driven data augmentation (KDDA) method and an artificial intelligence-generated content (AIGC) -based data augmentation method by exploiting the domain knowledge of wireless channels and by exploiting a novel generative model, respectively. Experimental results based on the DeepMIMO dataset demonstrate that the proposed IEFSF significantly reduces CSI feedback overhead by 64 times compared with existing methods while maintaining higher feedback accuracy using only several hundred collected samples.

cs.IT↗

arXiv2024

Environment Sensing-aided Beam Prediction with Transfer Learning for Smart Factory

In this paper, we propose an environment sensing-aided beam prediction model for smart factory that can be transferred from given environments to a new environment. In particular, we first design a pre-training model that predicts the optimal beam by sensing the present environmental information. When encountering a new environment, it generally requires collecting a large amount of new training data to retrain the model, whose cost severely impedes the application of the designed pre-training model. Therefore, we next design a transfer learning strategy that fine-tunes the pre-trained model by limited labeled data of the new environment. Simulation results show that when the pre-trained model is fine-tuned by 30\% of labeled data from the new environment, the Top-10 beam prediction accuracy reaches 94\%. Moreover, compared with the way to completely re-training the prediction model, the amount of training data and the time cost of the proposed transfer learning strategy reduce 70\% and 75\% respectively.

eess.SP↗