arXiv subjects

Simon Hubmer

Publications and source records attributed to Simon Hubmer.

At least 19 recordsLinked to original sources

arXiv2026

On Fourier Phase Retrieval from Differential Intensity Measurements with Applications to Wavefront Sensing

In this paper, we consider Fourier phase retrieval from differential intensity measurements, i.e., the problem of determining the phase of a complex-valued function from a series of intensity measurements differing only by slight modulations in Fourier domain. These modulations may be induced by optical elements such as prisms or phase plates, or via spatial-light modulators. Generalizing the principles behind the transport of intensity equation, we show that given such differential intensity measurements, the phase can be determined as the solution of certain partial differential or integro-differential equations. This is then used to design efficient reconstruction algorithms for a number of Fourier-type wavefront sensors, such as the pyramid wavefront sensor, commonly used in adaptive optics. Numerical experiments illustrate the usefulness of our proposed approach.

math.NA↗

arXiv2026

Efficient TV regularization of large-scale linear inverse problems via the SCD semismooth* Newton method with applications in tomography

In this paper, we consider the efficient numerical minimization of Tikhonov functionals resulting from total-variation (TV) regularization of linear inverse problems. Since the TV penalty is non-smooth, this is typically done either via smooth approximations, which are inexact, or using non-smooth optimization techniques, which can often be numerically expensive, in particular for large-scale problems. Here, we present a numerically efficient minimization approach based on the recently proposed semismooth* Newton method, which employs a novel concept of graphical derivatives and exhibits locally superlinear convergence. The proposed approach is specifically tailored to TV regularization, suitable for large-scale inverse problems, and supported by strong mathematical convergence guarantees. Furthermore, we demonstrate its performance on two (large-scale) tomographic imaging problems and compare our results to those obtained via other state-of-the-art TV regularization approaches. Finally, an open-source Matlab implementation of the proposed method is made available online at https://github.com/HGfrerer/TVReg-2D-Semismoothstar-Newton.

math.NA↗

arXiv2026

On a PDE-based material parameter identification problem with contact constraints

We consider the identification of a scalar coefficient in a PDE-based parameter estimation problem with contact constraints. The considered problem can be used as an idealized model of a membrane under forces, constrained by a barrier or indenter. More generally, it serves as a benchmark for the analysis of more complex contact problems and the development of corresponding reconstruction algorithms. In this paper, we discuss both the forward and inverse parameter estimation problems, as well as uniqueness and non-uniqueness issues caused by the contact constraints. Furthermore, we consider the design and implementation of reconstruction approaches which we test on numerical examples, illustrating both uniqueness and non-uniqueness as well as parameter identifyability.

math.NA↗

arXiv2025

3D Full Spectrum Fitting: Algorithm Comparison

Full spectrum fitting is the prevailing method for extracting stellar kinematic and population measurements from 1D galaxy spectra. 3D methods refer to analysis of Integral Field Spectroscopy (IFS) data where spatial and spectral dimensions are modelled simultaneously. While several 3D methods exist for modelling gas structures there has been less investigation into the more computationally demanding problem of 3D full spectrum fitting for stellar recoveries. This work introduces and compares two algorithms for this task: the Projected Nesterov Kaczmarz Reconstruction method (PNKR) and a version of the Bayes-LOSVD software which has been modified to account for spatial correlations. We aim to understand strengths and weaknesses of both algorithms and assess the impact of 3D methods for stellar inferences. We apply both recovery algorithms to a mock IFS data over a signal-to-noise ratio (SNR) range from 20-200 and evaluate the quality of the recoveries compared to the known ground truth. Accounting for spatial correlations in Bayes-LOSVD significantly improved the accuracy and precision of kinematic recoveries. 3D modelling with PNKR did not provide any significant improvement over 1D fits however, for SNR>40, PNKR did recover the most accurate kinematics overall. Additionally, by modelling the joint distribution over kinematics and populations, PNKR could successfully infer trends between these quantities e.g. inferring local metallicity-velocity trends, albeit with a significant bias on the absolute metallicity. Having demonstrated advantages of (i) 3D modelling with Bayes-LOSVD, and (ii) joint kinematic-population analyses with PNKR, we conclude that both methodological advances will prove useful for detecting and characterising stellar structures from IFS data.

astro-ph.GA↗

arXiv2025

Singular Value-based Atmospheric Tomography with Fourier Domain Regularization (SAFR)

Atmospheric tomography, the problem of reconstructing atmospheric turbulence profiles from wavefront sensor measurements, is an integral part of many adaptive optics systems. It is used to enhance the image quality of ground-based telescopes, such as for the Multiconjugate Adaptive Optics Relay For ELT Observations (MORFEO) instrument on the Extremely Large Telescope (ELT). To solve this problem, a singular-value decomposition (SVD) based approach has been proposed before. In this paper, we focus on the numerical implementation of the SVD-based Atmospheric Tomography with Fourier Domain Regularization Algorithm (SAFR) and its performance for Multi-Conjugate Adaptive Optics (MCAO) systems. The key features of the SAFR algorithm are the utilization of the FFT and the pre-computation of computationally demanding parts. Together, this yields a fast algorithm with less memory requirements than commonly used Matrix Vector Multiplication (MVM) approaches. We evaluate the performance of SAFR regarding reconstruction quality and computational expense in numerical experiments using the simulation environment COMPASS, in which we use an MCAO setup resembling the physical parameters of the MORFEO instrument of the ELT.

astro-ph.IM↗

arXiv2025

A Geometrical Acoustics based Focusing Algorithm for Layered Media in Medical Ultrasound

Ultrasound imaging is a widely used, non-invasive diagnostic tool in modern medicine. A crucial assumption is a constant sound speed in the observed medium. For large scale sound speed variations, this assumption leads to blurred and distorted images. In this paper, we present a Geometrical Acoustics based Focusing Algorithm (GOAT) which is able to correct for these aberrations, given a known layered medium setting with continuously differentiable medium boundaries. Existence and uniqueness conditions for a solution to the underlying system of equations are given. Using numerical simulations, the precision of our method is evaluated. Finally, the resulting image quality improvements are demonstrated in a phantom-based experimental setup.

math.NA↗

arXiv2025

On the Intensity-based Inversion Method for Quantitative Quasi-Static Elastography

In this paper, we consider the intensity-based inversion method (IIM) for quantitative material parameter estimation in quasi-static elastography. In particular, we consider the problem of estimating the material parameters of a given sample from two internal measurements, one obtained before and one after applying some form of deformation. These internal measurements can be obtained via any imaging modality of choice, for example ultrasound, optical coherence or photo-acoustic tomography. Compared to two-step approaches to elastography, which first estimate internal displacement fields or strains and then reconstruct the material parameters from them, the IIM is a one-step approach which computes the material parameters directly from the internal measurements. To do so, the IIM combines image registration together with a model-based, regularized parameter reconstruction approach. This combination has the advantage of avoiding some approximations and derivative computations typically found in two-step approaches, and results in the IIM being generally more stable to measurement noise. In the paper, we provide a full convergence analysis of the IIM within the framework of inverse problems, and detail its application to linear elastography. Furthermore, we discuss the numerical implementation of the IIM and provide numerical examples simulating an optical coherence elastography (OCE) experiment.

math.NA↗

arXiv2025

Leveraging Real-Time Data Analysis and Multiple Kernel Learning for Manufacturing of Innovative Steels

The implementation of thermally sprayed components in steel manufacturing presents challenges for production and plant maintenance. While enhancing performance through specialized surface properties, these components may encounter difficulties in meeting modified requirements due to standardization in the refurbishment process. This article proposes updating the established coating process for thermally spray coated components for steel manufacturing (TCCSM) by integrating real-time data analytics and predictive quality management. Two essential components--the data aggregator and the quality predictor--are designed through continuous process monitoring and the application of data-driven methodologies to meet the dynamic demands of the evolving steel landscape. The quality predictor is powered by the simple and effective multiple kernel learning strategy with the goal of realizing predictive quality. The data aggregator, designed with sensors, flow meters, and intelligent data processing for the thermal spray coating process, is proposed to facilitate real-time analytics. The performance of this combination was verified using small-scale tests that enabled not only the accurate prediction of coating quality based on the collected data but also proactive notification to the operator as soon as significant deviations are identified.

cs.LG↗

arXiv2025

A Practical Guide to Optimizing Industrial Thermal Spraying through Comparative Multi-Objective Optimization

Achieving both high quality and cost-efficiency are two critical yet often conflicting objectives in manufacturing and maintenance processes. Quality standards vary depending on the specific application, while cost-effectiveness remains a constant priority. These competing objectives lead to multi-objective optimization problems, where algorithms are employed to identify Pareto-optimal solutions - compromise points which provide decision-makers with feasible parameter settings. The successful application of such optimization algorithms relies on the ability to model the underlying physical system, which is typically complex, through either physical or data-driven approaches, and to represent it mathematically. This paper applies three multi-objective optimization algorithms to determine optimal process parameters for high-velocity oxygen fuel (HVOF) thermal spraying. Their ability to enhance coating performance while maintaining process efficiency is systematically evaluated, considering practical constraints and industrial feasibility. Practical validation trials are conducted to verify the approximate theoretical solutions generated by the algorithms, ensuring their applicability and reliability in real-world scenarios. By exploring the performance of these diverse algorithms in an industrial setting, this study offers insights into their practical applicability, guiding both researchers and practitioners in enhancing process efficiency and product quality in the coating industry.

math.OC↗

arXiv2024

On SCD Semismooth$^*$ Newton methods for the efficient minimization of Tikhonov functionals with non-smooth and non-convex penalties

We consider the efficient numerical minimization of Tikhonov functionals with nonlinear operators and non-smooth and non-convex penalty terms, which appear for example in variational regularization. For this, we consider a new class of SCD semismooth$^*$ Newton methods, which are based on a novel concept of graphical derivatives, and exhibit locally superlinear convergence. We present a detailed description of these methods, and provide explicit algorithms in the case of sparsity and total-variation penalty terms. The numerical performance of these methods is then illustrated on a number of tomographic imaging problems.

math.NA↗

arXiv2024

On Phase Unwrapping via Digital Wavefront Sensors

In this paper, we derive a new class of methods for the classic 2D phase unwrapping problem of recovering a phase function from its wrapped form. For this, we consider the wrapped phase as a wavefront aberration in an optical system, and use reconstruction methods for (digital) wavefront sensors for its recovery. The key idea is that mathematically, common wavefront sensors are insensitive to whether an incoming wavefront is wrapped or not. However, typical reconstructors for these sensors are optimized to compute smooth wavefronts. Thus, digitally "propagating" a wrapped phase through such a sensor and then applying one of these reconstructors results in a smooth unwrapped phase. First, we show how this principle can be applied to derive phase unwrapping algorithms based on digital Shack-Hartmann and Fourier-type wavefront sensors. Then, we numerically test our approach on an unwrapping problem appearing in a free-space optical communications project currently under development, and compare the results to those obtained with other state-of-the-art algorithms.

math.NA↗

arXiv2024

Singular Value and Frame Decomposition-based Reconstruction for Atmospheric Tomography

Atmospheric tomography, the problem of reconstructing atmospheric turbulence profiles from wavefront sensor measurements, is an integral part of many adaptive optics systems used for enhancing the image quality of ground-based telescopes. Singular-value and frame decompositions of the underlying atmospheric tomography operator can reveal useful analytical information on this inverse problem, as well as serve as the basis of efficient numerical reconstruction algorithms. In this paper, we extend existing singular value decompositions to more realistic Sobolev settings including weighted inner products, and derive an explicit representation of a frame-based (approximate) solution operator. These investigations form the basis of efficient numerical solution methods, which we analyze via numerical simulations for the challenging, real-world Adaptive Optics system of the Extremely Large Telescope using the entirely MATLAB-based simulation tool MOST.

math.NA↗

arXiv2024

Norms in sinogram space and stability estimates for the Radon transform

We consider different norms for the Radon transform $Rf$ of a function $f$ and investigate under which conditions they can be estimated from above or below by some standard norms for $f$. We define Fourier-based norms for $Rf$ which can be related to Bessel-potential space norms for $f$. Furthermore, we define a variant of a total-variation norm for $Rf$ and provide conditions under which it is equivalent to the total-variation norm of $f$. To illustrate potential applications of these results, we propose a novel nonlinear backprojection method for inverting the Radon transform and present numerical results on simulated and experimental data.

math.FA↗

arXiv2024

An Inverse Problems Approach to Pulse Wave Analysis in the Human Brain

Cardiac pulsations in the human brain have received recent interest due to their possible role in the pathogenesis of neurodegenerative diseases. Further interest stems from their possible application as an endogenous signal source that can be utilized for brain imaging in general. The (pulse-)wave describing the blood flow velocity along an intracranial artery consists of a forward (anterograde) and a backward (retrograde, reflected) part, but measurements of this wave usually consist of a superposition of these components. In this paper, we provide a mathematical framework for the inverse problem of estimating the pulse wave velocity, as well as the forward and backward component of the pulse wave separately from MRI measurements on intracranial arteries. After a mathematical analysis of this problem, we consider possible reconstruction approaches, and derive an alternate direction approach for its solution. The resulting methods provide estimates for anterograde/retrograde wave forms and the pulse wave velocity under specified assumptions on a cerebrovascular model system. Numerical experiments on simulated and experimental data demonstrate the applicability and preliminary in vivo feasibility of the proposed methods.

math.NA↗

arXiv2024

Regularization of linear inverse problems with irregular noise using embedding operators

In this paper, we investigate regularization of linear inverse problems with irregular noise. In particular, we consider the case that the noise can be preprocessed by certain adjoint embedding operators. By introducing the consequent preprocessed problem, we provide convergence analysis for general regularization schemes under standard assumptions. Furthermore, for a special case of Tikhonov regularization in Computerized Tomography, we show that our approach leads to a novel (Fourier-based) filtered backprojection algorithm. Numerical examples with different parameter choice rules verify the efficiency of our proposed algorithm.

math.NA↗

arXiv2023

Predictive Modelling of Critical Variables for Improving HVOF Coating using Gamma Regression Models

Thermal spray coating is a critical process in many industries, involving the application of coatings to surfaces to enhance their functionality. This paper proposes a framework for modelling and predicting critical target variables in thermal spray coating processes, based on the application of statistical design of experiments (DoE) and the modelling of the data using generalized linear models (GLMs) with a particular emphasis on gamma regression. Experimental data obtained from thermal spray coating trials are used to validate the presented approach, demonstrating that it is able to accurately model and predict critical target variables. As such, the framework has significant potential for the optimization of thermal spray coating processes, and can contribute to the development of more efficient and effective coating technologies in various industries.

stat.AP↗

arXiv2023

A Frame Decomposition of the Funk-Radon Transform

The Funk-Radon transform assigns to a function defined on the unit sphere its integrals along all great circles of the sphere. In this paper, we consider a frame decomposition of the Funk-Radon transform, which is a flexible alternative to the singular value decomposition. In particular, we construct a novel frame decomposition based on trigonometric polynomials and show its application for the inversion of the Funk-Radon transform. Our theoretical findings are verified by numerical experiments, which also incorporate a regularization scheme.

math.NA↗

arXiv2022

Subaperture-based Digital Aberration Correction for OCT: A Novel Mathematical Approach

In this paper, we consider subaperture-based approaches for the digital aberration correction (DAC) of optical coherence tomography (OCT) images. In particular, we introduce a mathematical framework for describing this class of approaches, leading to new insights for the subaperture-correlation method. Furthermore, we propose a novel DAC approach requiring only minimal statistical assumptions on the spectral phase of the scanned object. Finally, we demonstrate the applicability of our novel DAC approach via numerical examples based on both simulated and experimental OCT data.

physics.optics↗