arXiv subjects

Sylvain Combrié

Publications and source records attributed to Sylvain Combrié.

At least 19 recordsLinked to original sources

arXiv2026

Direct Orientation Contrast Imaging of Anti-Phase Domains on III-V Materials Using Scanning Electron Microscopy

Direct orientation contrast imaging of zinc-blende III-V materials is studied using scanning electron microscopy. A quantitative approach is taken using a 3 μm thick orientation-patterned GaP grown on GaAs sample, studying the anti-phase domain contrast with respect to the electron beam energy and the tilt angle. A qualitative approach is taken for III-V grown on non-polar materials with and without chemical mechanical polishing. Finally, a processing of the acquired image for GaP on Si reveals in plane preferential anti-phase boundaries.

cond-mat.mtrl-sci↗

arXiv2025

High efficiency second harmonic generation in transverse orientation patterned gallium phosphide waveguides

Achieving high conversion efficiencies in second-order nonlinear optical processes is a key challenge in integrated photonics for both classical and quantum applications. This paper presents the first demonstration of Transverse Orientation-Patterned gallium phosphide (TOP-GaP) waveguides showing high-efficiency second harmonic generation. In such devices, first order modal phase matching is unlocked and optimized through the inversion of the nonlinear susceptibility along the vertical direction. We discuss here the theory behind modal phase matching in TOP structures, describe the fabrication process, and present linear and nonlinear characterizations of the TOP-GaP waveguides.

physics.optics↗

arXiv2025

Mode-locking in a semiconductor photonic bandgap laser

Multimode lasers have a very complex dynamics, as expected when oscillators are nonlinearly coupled. Order emerges when the modes lock together; in this case the coherent superposition of the modes results into a periodic train of pulses or a nearly constant power output with a linearly chirped frequency, for instance. The first is promoted by a saturable absorber, or an equivalent physical mechanism, while the latter is connected to more subtle conditions, such as the fast dynamics of the gain. Here we consider the case of a multimode semiconductor laser with gain provided by quantum wells but without any saturable absorber. The cavity is designed to have a photonic bandgap and very low dispersion. We show, first in theory, that modes can lock together and generate a variety of waveforms which are not trains of pulses nor chirped continuous power waves. Mode locking is observed in experiments on a III-V/Silicon hybrid laser with the cavity made of a suitably tapered grating. Moreover, we find that the mode-locking beatnote is strongly dependent on the injected current: we reach more than 1 GHz modulation amplitude of the beatnote at a modulation frequency of 50 kHz. The behaviour of the laser is critically determined by the dispersion, which can be controlled by the photonic crystal structure. By scaling up the number of interacting modes, this laser source may offer an effective and extremely flexible way of generating waveforms à la carte.

physics.optics↗

arXiv2022

Fast dispersion tailoring of multimode photonic crystal resonators

We introduce a numerical procedure which permits to drastically accelerate the design of multimode photonic crystal resonators. Specifically, we demonstrate that the optical response of an important class of such nanoscale structures is reproduced accurately by a simple, one-dimensional model, within the entire spectral range of interest. This model can describe a variety of tapered photonic crystal structures. Orders of magnitude faster to solve, our approach can be used to optimize certain properties of the nanoscale cavity. Here we consider the case of a nanobeam cavity, where the confinement results from the modulation of its width. The profile of the width is optimized, in order to flatten the resonator dispersion profile (so that all modes are equally spaced in frequency). This result is particularly relevant for miniaturizing parametric generators of non-classical light, optical nano-combs and mode-locked laser sources. Our method can be easily extended to complex geometries, described by multiple parameters.

physics.optics↗

arXiv2022

Canonical Four-Wave-Mixing in Photonic Crystal Resonators: tuning, tolerances and scaling

Canonical Four-Wave-Mixing occurs in a resonator with only the required number of modes, thereby inhibiting competing parametric processes. The properties of the recently introduced photonic crystal parametric oscillator, Marty et al. Nat. Photonics, 15, 53 (2021), are discussed extensively. We compare the bichromatic design with other geometries of photonic crystal resonators. Based on a statistical study over more than 100 resonators and 10 parametric oscillators, robustness against fabrication tolerances is assessed, performances are evaluated in terms of average values and their dispersion, and the dependence on the main parameters is shown to follow the theoretical scaling. The lowest pump power at threshold is $\approx$ 40 $μ$W and we show the existence of a minimum value of the cavity photon lifetime as a condition for parametric oscillation, which is related to three photon absorption.

physics.optics↗

arXiv2022

Mode mapping Q > 500 000 photonic crystal nanocavities using free carrier absorption

We demonstrate a nonlinear photomodulation spectroscopy method to image the mode profile of a high-Q photonic crystal resonator (PhCR). This far-field imaging method is suitable for ultrahigh-Q cavities which we demonstrate on a Q = 619000 PhCR. We scan the PhCR surface with a 405 nm pump beam that modulates the refractive index by local thermal tuning, while probing the response of the resonance. We enhance resolution by probing at high power, using the thermo-optical nonlinearity of the PhCR. Spatial resolution of the thermo-optical effect is typically constrained by the broad thermal profile of the optical pump. Here we go beyond the thermal limit and show that we can approach the diffraction limit of the pump light. This is due to free carrier absorption that heats up the PhCR only when there is overlap between the optical pump spot and the optical mode profile. This is supported with a thermo-optical model that reproduces the high-resolution mode mapping. Results reveal that the observed enhanced resolution is reached for surprisingly low carrier density.

physics.optics↗

arXiv2022

Continuous-Wave Second-Harmonic Generation in Orientation-Patterned GaP Waveguides at Telecom Wavelengths

A new process to produce Orientation-Patterned Gallium Phosphide (OP-GaP) on GaAs with almost perfectly parallel domain boundaries is presented. Taking advantage of the chemical selectivity between phosphides and arsenides, OP-GaP is processed into suspended shallow-ridge waveguides. Efficient Second-Harmonic Generation from Telecom wavelengths is achieved in both Type-I and Type-II polarisation configurations. The highest observed conversion efficiency is \SI{200}{\percent\per\watt\per\centi\meter\squared}, with a bandwidth of \SI{2.67}{\nano\meter} in a \SI{1}{\milli\meter}-long waveguide. The variation of the conversion efficiency with wavelength closely follows a squared cardinal sine function, in excellent agreement with theory, confirming the good uniformity of the poling period over the entire length of the waveguide.

physics.optics↗

arXiv2022

Time-correlated Photons from a In$_{0.5}$Ga$_{0.5}$P Photonic Crystal Cavity on a Silicon Chip

Time-correlated photon pairs are generated by triply-resonant Four-Wave-Mixing in a In$_{0.5}$Ga$_{0.5}$P Photonic Crystal cavitiy. Maximal efficiency is reached by actively compensating the residual spectral misalignment of the cavity modes. The generation rate reaches 5 MHz in cavities with Q-factor $\approx 4\times 10^4$, more than one order of magnitude larger than what is measured using ring resonators with similar Q factors fabricated on the same chip. The Photonic Crystal source is integrated on a Si photonic circuit, an important asset for applications in quantum technologies.

physics.optics↗

arXiv2020

Efficient Type II Second Harmonic Generation in an Indium Gallium Phosphide on insulator wire waveguide aligned with a crystallographic axis

We theoretically and experimentally investigate type II second harmonic generation in III-V-on-insulator wire waveguides. We show that the propagation direction plays a crucial role and that longitudinal field components can be leveraged for robust and efficient conversion. We predict that the maximum theoretical conversion is larger than that of type I second harmonic generation for similar waveguide dimensions and reach an experimental conversion efficiency of 12 %/W, limited by the propagation loss.

physics.optics↗

arXiv2020

Photonic Crystal Optical Parametric Oscillator

Miniaturization of devices has been a primary objective in microelectronics and photonics for decades, aiming at denser integration, enhanced functionalities and drastic reduction of power consumption. Headway in nanophotonics is currently linked to the progress in concepts and technologies necessary for applications in information and communication, brain inspired computing, medicine and sensing and quantum information. Amongst all nanostructures, semiconductor photonic crystals (PhCs) occupy a prominent position as they enable the fabrication of quasi ultimate optical cavities. Low threshold laser diodes or Raman lasers , low power consuming optical memories , efficient single photon sources or single photon quantum gates are impressive examples of their capabilities. We report the demonstration of about 20 micron long PhC semiconductor optical parametric oscillator (OPO) at telecom wavelength exploiting nearly diffraction limited optical modes. The pump power threshold is measured below 0.2 mW. Parametric oscillation was reached through the drastic enhancement of Kerr optical Four Wave Mixing by thermally tuning the high Q modes of a nanocavity into a triply resonant configuration. Miniaturization of this paradigmatic source of coherent light paves the way for quantum optical circuits, dense integration of highly efficient nonlinear sources of squeezed light or entangled photons pairs.

physics.optics↗

arXiv2020

Dynamics of mode-locked nanolasers based on Hermite-Gaussian modes

The different dynamical behaviors of the Hermite-Gaussian (HG) modes of mode-locked nanolasers based on a harmonic photonic cavity are investigated in detail using a model based on a modified Gross-Pitaevskii Equation. Such nanolasers are shown to exhibit mode-locking with a repetition rate independent of the cavity length, which is a strong asset for compactness.The differences with respect to conventional lasers are shown to originate from the peculiar gain competition between HG modes, which is investigated in details. In the presence of a saturable absorber, the different regimes, i. e. Q-switching, Q-switched mode-locking, and continuous-wave (cw) mode locking, are isolated in a phase diagram and separately described. Mode-locking is found to be robust against phase-intensity coupling and to be achievable in a scheme with spatially separated gain and absorber.

physics.optics↗

arXiv2020

Long Working Distance Apodized Grating Coupler

We design a focusing grating coupler by a simultaneous apodization of the filling factor and the period. In addition to in plane focusing to the input waveguide providing a total length of less than 70μm, a further apodization of the curvature allows out of plane focusing into a fiber set 150μm away from the grating surface. The design is proposed for novel semiconductor on insulator waveguides such as GaInP. The coupling efficiency is calculated from two dimensional simulation which is about 45%.

physics.optics↗

arXiv2020

Thermo-optical dynamics of a nonlinear GaInP photonic crystal nanocavity depend on the optical mode profile

We measure the dynamics of the thermo-optical nonlinearity of both a mode-gap nanocavity and a delocalized mode in a Ga$_{\mathrm{0.51}}$In$_{\mathrm{0.49}}$P photonic crystal membrane. We model these results in terms of heat transport and thermo-optical response in the material. By step-modulating the optical input power we push the nonlinear resonance to jump between stable branches of its response curve, causing bistable switching. An overshoot of the intensity followed by a relaxation tail is observed upon bistable switching. In this way, the thermal relaxation of both the localized resonance and the delocalized resonance is measured. Significant difference in decay time is observed and related to the optical mode profile of the resonance. We reproduce the observed transient behavior with our thermo-optical model, implementing a non-instantaneous nonlinearity, and taking into account the optical mode profile of the resonance, as experimentally measured.

physics.optics↗

arXiv2020

Mode-Locking of the Hermite-Gaussian Modes of a Nanolaser

Mode-locking is predicted in a nanolaser cavity forming an effective photonic harmonic potential. The cavity is substantially more compact than a Fabry-Perot resonator with comparable pulsing period, which is here controlled by the potential. In the limit of instantaneous gain and absorption saturation, mode-locking corresponds to a stable dissipative soliton, which it very well approximated by the coherent state of a quantum mechanical harmonic oscillator. This property is robust against non-instantaneous material response and non-zero phase-intensity coupling.

physics.optics↗

arXiv2019

Efficient Photonic Crystal Parametric Source harnessing high-Q resonances

A new tuning mechanism is introduced in high-Q multimode photonic crystal resonators allowing to harness the resonant enhancement of the parametric resonance systematically. As a consequence, ultra-efficient stimulated and spontaneous Four Wave Mixing at continuous microWatt pumping levels are observed, and the scaling with Q is demonstrated. Experimental results are in perfect agreement with an analytical model without fitting parameters.

physics.optics↗

arXiv2019

Optomechanical Gigahertz Oscillator made of a Two Photon Absorption free piezoelectric III/V semiconductor

Oscillators in the GHz frequency range are key building blocks for telecommunication, timing and positioning applications. Operating directly in the GHz and compactness while keeping high frequency stability, is still an up-to-date challenge. Recently, optomechanical crystals, compact by nature, have demonstrated GHz frequency modes, thus gathering prerequisite features for using them as oscillators. Here we report on the demonstration, in ambient atmospheric conditions, of an optomechanical oscillator designed with an original concept based on bichromatic one-dimensional optomechanical crystal. Self sustained oscillations directly at 3 GHz are routinely achieved with a low optical power threshold of 40 $μW$ and short-term linewidth narrowed down to 100 Hz in agreement with phase noise measurements (-113 dBc/Hz at 1 MHz from the carrier) for free running optomechanical oscillators. This oscillator is made of InGaP, low loss and TPA-free piezoelectric material which makes it valuable for optomechanics.

physics.optics↗

arXiv2017

High frequency optomechanical disk resonators in III-V ternary semiconductors

Optomechanical systems based on nanophotonics are advancing the field of precision motion measurement, quantum control and nanomechanical sensing. In this context III-V semiconductors offer original assets like the heteroepitaxial growth of optimized metamaterials for photon/phonon interactions. GaAs has already demonstrated high performances in optomechanics but suffers from two photon absorption (TPA) at the telecom wavelength, which can limit the cooperativity. Here, we investigate TPA-free III-V semiconductor materials for optomechanics applications: GaAs lattice-matched In0:5Ga0:5P and Al0:4Ga0:6As. We report on the fabrication and optical characterization of high frequency (500-700 MHz) optomechanical disks made out of these two materials, demonstrating high optical and mechanical Q in ambient conditions. Finally we achieve operating these new devices as laser-sustained optomechanical self-oscillators, and draw a first comparative study with existing GaAs systems.

physics.optics↗

arXiv2017

Fano lines in the reflection spectrum of directly coupled systems of waveguides and cavities: measurements, modeling and manipulation of the Fano asymmetry

We measure and analyze reflection spectra of directly coupled systems of waveguides and cavities. The observed Fano lines offer insight in the reflection and coupling processes. Very different from side-coupled systems, the observed Fano line shape is not caused by the termini of the waveguide, but the coupling process between the measurement device fiber and the waveguide. Our experimental results and analytical model show that the Fano parameter that describes the Fano line shape is very sensitive to the coupling condition. A movement of the fiber well below the Rayleigh range can lead to a drastic change of the Fano line shape.

physics.optics↗