arXiv subjects

Toan Trong Tran

Publications and source records attributed to Toan Trong Tran.

At least 37 records · Page 2Linked to original sources

arXiv2018

Very Large and Reversible Stark Shift Tuning of Single Emitters in Layered Hexagonal Boron Nitride

Combining solid state single photon emitters (SPE) with nanophotonic platforms is a key goal in integrated quantum photonics. In order to realize functionality in potentially scalable elements, suitable SPEs have to be bright, stable, and widely tunable at room temperature. In this work we show that selected SPEs embedded in a few layer hexagonal boron nitride (hBN) meet these demands. In order to show the wide tunability of these SPEs we employ an AFM with a conductive tip to apply an electrostatic field to individual hBN emitters sandwiched between the tip and an indium tin oxide coated glass slide. A very large and reversible Stark shift of $(5.5 \pm 3)\,$nm at a zero field wavelength of $670\,$nm was induced by applying just $20\,$V, which exceeds the typical resonance linewidths of nanodielectric and even nanoplasmonic resonators. Our results are important to further understand the physical origin of SPEs in hBN as well as for practical quantum photonic applications where wide spectral tuning and on/off resonance switching are required.

cond-mat.mes-hall↗

arXiv2018

Anti-Stokes excitation of solid-state quantum emitters for nanoscale thermometry

Color centers in solids are the fundamental constituents of a plethora of applications such as lasers, light emitting diodes and sensors, as well as the foundation of advanced quantum information and communication technologies. Their photoluminescence properties are usually studied under Stokes excitation, in which the emitted photons are at a lower energy than the excitation ones. In this work, we explore the opposite Anti-Stokes process, where excitation is performed with lower energy photons. We report that the process is sufficiently efficient to excite even a single quantum system, namely the germanium-vacancy center in diamond. Consequently, we leverage the temperature-dependent, phonon-assisted mechanism to realize an all-optical nanoscale thermometry scheme that outperforms any homologous optical method employed to date. Our results frame a promising approach for exploring fundamental light-matter interactions in isolated quantum systems, and harness it towards the realization of practical nanoscale thermometry and sensing.

physics.app-ph↗

arXiv2018

Bottom up engineering of near-identical quantum emitters in atomically thin materials

Quantum technologies require robust and photostable single photon emitters (SPEs) that can be reliably engineered. Hexagonal boron nitride (hBN) has recently emerged as a promising candidate host to bright and optically stable SPEs operating at room temperature. However, the emission wavelength of the fluorescent defects in hBN has, to date, been shown to be uncontrolled. The emitters usually display a large spread of zero phonon line (ZPL) energies spanning over a broad spectral range (hundreds of nanometers), which hinders the potential development of hBN-based devices and applications. We demonstrate bottom-up, chemical vapor deposition growth of large-area, few layer hBN that hosts large quantities of SPEs: 100 per 10x10 μm2. Remarkably, more than 85 percent of the emitters have a ZPL at (580{\pm}10)nm, a distribution which is over an order of magnitude narrower than previously reported. Exploiting the high density and uniformity of the emitters, we demonstrate electrical modulation and tuning of the ZPL emission wavelength by up to 15 nm. Our results constitute a definite advancement towards the practical deployment of hBN single photon emitters in scalable quantum photonic and hybrid optoelectronic devices based on 2D materials.

physics.app-ph↗

arXiv2017

Single Photon Emission from Plasma Treated 2D Hexagonal Boron Nitride

Artificial atomic systems in solids are becoming increasingly important building blocks in quantum information processing and scalable quantum nanophotonic networks. Yet, synthesis of color centers that act as single photon emitters which are suitable for on-chip applications is still beyond reach. Here, we report a number of plasma and thermal annealing methods for the fabrication of emitters in tape-exfoliated hexagonal boron nitride (hBN) crystals. A two-step process comprised of Ar plasma etching and subsequent annealing in Ar is highly robust, and yields a seven-fold increase in the concentration of emitters in hBN. The initial plasma etching step generates emitters that suffer from blinking and bleaching, whereas the two-step process yields emitters that are photostable at room temperature and have an emission energy distribution that is red-shifted relative to that of pristine hBN. An analysis of emitters fabricated by a range of plasma and annealing treatments, combined with a theoretical investigation of point defects in hBN indicates that single photon emitters characterized by a high degree of photostability and emission wavelengths greater than ~700 nm are associated with defect complexes that contain oxygen. This is further confirmed by generating the emitters by annealing hBN in an oxidative atmosphere. Our findings advance present understanding of the structure of quantum emitter in hBN and enhance the nanofabrication toolkit that is needed to realize integrated quantum nanophotonics based on 2D materials.

cond-mat.mtrl-sci↗

arXiv2017

Nanoassembly of quantum emitters in hexagonal boron nitride and gold nanospheres

Assembly of quantum nanophotonic systems with plasmonic resonators are important for fundamental studies of single photon sources as well as for on-chip information processing. In this work, we demonstrate controllable nanoassembly of gold nanospheres with ultra-bright quantum emitters in 2D layered hexagonal boron nitride (hBN). We utilize an atomic force microscope (AFM) tip to precisely position gold nanospheres to close proximity of the quantum emitters and observe the resulting emission enhancement and fluorescence lifetime reduction. A fluorescence enhancement of over 300% is achieved experimentally for quantum emitters in hBN, with a radiative quantum efficiency of up to 40% and a saturated count rate in excess of 5 million counts/s. Our results are promising for future employment of quantum emitters in hBN for integrated nanophotonic devices and plasmonic based nanosensors.

physics.optics↗

arXiv2017

Super-resolution imaging of quantum emitters in layered materials

Layered van der Waals materials are emerging as compelling two-dimensional (2D) platforms for studies of nanophotonics, polaritonics, valleytronics and spintronics, and have the potential to transform applications in sensing, imaging and quantum information processing. Amongst these, hexagonal boron nitride (hBN) is unique in that it hosts ultra-bright, room temperature single photon emitters (SPEs). However, an outstanding challenge is to locate SPEs in hBN with high precision, a task which requires breaking the optical diffraction limit. Here, we report the imaging of SPEs in layered hBN with a spatial resolution of 63 nm using ground state depletion (GSD) nanoscopy. Furthermore, we show that SPEs in hBN possess nonlinear photophysical properties which can be used to realize a new variant of GSD that employs a coincident pair of doughnut-shaped lasers to reduce the laser power that is needed to achieve a given resolution target. Our findings expand the current understanding of the photophysics of quantum emitters in layered hBN and demonstrate the potential for advanced nanophotonic and bio-imaging applications which require localization of individual emitters with super-resolution accuracy.

physics.optics↗

arXiv2017

Resonant Excitation of Quantum Emitters in Hexagonal Boron Nitride

Quantum emitters in layered hexagonal boron nitride (hBN) have recently attracted a great attention as promising single photon sources. In this work, we demonstrate resonant excitation of a single defect center in hBN, one of the most important prerequisites for employment of optical sources in quantum information application. We observe spectral linewidths of hBN emitter narrower than 1 GHz while the emitter experiences spectral diffusion. Temporal photoluminescence measurements reveals an average spectral diffusion time of around 100 ms. On-resonance photon antibunching measurement is also realized. Our results shed light on the potential use of quantum emitters from hBN in nanophotonics and quantum information.

cond-mat.mtrl-sci↗

arXiv2017

First principles investigation of quantum emission from hBN defects

Hexagonal boron nitride (hBN) has recently emerged as a fascinating platform for room-temperature quantum photonics due to the discovery of robust visible light single-photon emitters. In order to utilize these emitters, it is necessary to have a clear understanding of their atomic structure and the associated excitation processes that give rise to this single photon emission. Here we perform density-functional theory (DFT) and constrained DFT calculations for a range of hBN point defects in order to identify potential emission candidates. By applying a number of criteria on the electronic structure of the ground state and the atomic structure of the excited states of the considered defects, and then calculating the Huang-Rhys (HR) factor, we find that the CBVN defect, in which a carbon atom substitutes a boron atom and the opposite nitrogen atom is removed, is a potential emission source with a HR factor of 1.66, in good agreement with the experimental HR factor. We calculate the photoluminescence (PL) line shape for this defect and find that it reproduces a number of key features in the the experimental PL lineshape.

cond-mat.mtrl-sci↗

arXiv2017

Nanodiamonds with photostable, sub-gigahertz linewidths quantum emitters

Single photon emitters with narrow linewidths are highly sought after for applications in quantum information processing and quantum communications. In this letter, we report on a bright, highly polarized near infrared single photon emitter embedded in diamond nanocrystals with a narrow, sub GHz optical linewidths at 10K. The observed zero phonon line at ~ 780 nm is optically stable under low power resonant excitation and blue shifts as the excitation power increases. Our results highlight the prospect for using new near infrared color centers in nanodiamonds for quantum applications.

cond-mat.mes-hall↗

arXiv2017

Atomic Engineering of Single Photon Sources in 2D Boron Nitride Zai-Quan

Artificial atomic systems in solids such as single photon emitters are becoming increasingly important building blocks in quantum information processing and scalable quantum nanophotonic networks. Here, we report on a controllable way to engineer emitters in two-dimensional (2D) hexagonal boron nitride (hBN) crystals using plasma processing. The method is robust, and yields a 7-fold increase in the density of emitters in hBN, which is promising for their deployment in practical devices. While as-fabricated emitters suffer from blinking and bleaching, a subsequent annealing step yields photo-stable emitters. The presented process is the first step towards controllable placement of quantum emitters in hBN for integrated on-chip quantum nanophotonics based on 2D materials.

cond-mat.mtrl-sci↗

arXiv2017

Coupling quantum emitters in 2D materials with tapered fibers

Realization of integrated photonic circuits on a single chip requires controlled manipulation and integration of solid-state quantum emitters with nanophotonic components. Previous works focused on emitters embedded in a three-dimensional crystals -- such as nanodiamonds or quantum dots. In contrast, in this work we demonstrate coupling of a single emitter in a two-dimensional (2D) material, namely hexagonal boron nitride (hBN), with a tapered optical fiber and find a collection efficiency of the system is found to be 10~\%. Furthermore, due to the single dipole character of the emitter, we were able to analyse the angular emission pattern of the coupled system via back focal plane imaging. The good coupling efficiency to the tapered fiber even allows excitation and detection in a fully fiber coupled way yielding a true integrated system. Our results provide evidence of the feasibility to efficiently integrate quantum emitters in 2D materials with photonic structures.

physics.optics↗

arXiv2016

Room temperature single photon emission from oxidized tungsten disulphide multilayers

Two dimensional systems offer a unique platform to study light matter interaction at the nanoscale. In this work we report on robust quantum emitters fabricated by thermal oxidation of tungsten disulphide multilayers. The emitters show robust, optically stable, linearly polarized luminescence at room temperature, can be modeled using a three level system, and exhibit moderate bunching. Overall, our results provide important insights into understanding of defect formation and quantum emitter activation in 2D materials.

cond-mat.mes-hall↗

arXiv2016

Robust Solid State Quantum System Operating at 800 K

Realization of Quantum information and communications technologies requires robust, stable solid state single photon sources. However, most existing sources cease to function above cryogenic or room temperature due to thermal ionization or strong phonon coupling which impede their emissive and quantum properties. Here we present an efficient single photon source based on a defect in a van der Waals crystal that is optically stable and operates at elevated temperatures of up to 800 K. The quantum nature of the source and the photon purity are maintained upon heating to 800 K and cooling back to room temperature. Our report of a robust high temperature solid state single photon source constitutes a significant step to-wards practical, integrated quantum technologies for real-world environments.

quant-ph↗

arXiv2016

Engineering and localization of quantum emitters in large hexagonal boron nitride layers

Hexagonal boron nitride (hBN) is a wide bandgap van der Waals material that has recently emerged as promising platform for quantum photonics experiments. In this work we study the formation and localization of narrowband quantum emitters in large flakes (up to tens of microns wide) of hBN. The emitters can be activated in as-grown hBN by electron irradiation or high temperature annealing, and the emitter formation probability can be increased by ion implantation or focused laser irradiation of the as-grown material. Interestingly, we show that the emitters are always localized at edges of the flakes, unlike most luminescent point defects in 3D materials. Our results constitute an important step on the road map of deploying hBN in nanophotonics applications.

cond-mat.mtrl-sci↗

arXiv2016

Non-linear excitation of quantum emitters in two-dimensional hexagonal boron nitride

Two-photon absorption is an important non-linear process employed for high resolution bio-imaging and non-linear optics. In this work we realize two-photon excitation of a quantum emitter embedded in a two-dimensional material. We examine defects in hexagonal boron nitride and show that the emitters exhibit similar spectral and quantum properties under one-photon and two-photon excitation. Furthermore, our findings are important to deploy two-dimensional hexagonal boron nitride for quantum non-linear photonic applications.

physics.optics↗

arXiv2016

Robust multicolor single photon emission from point defects in hexagonal boron nitride

Hexagonal boron nitride (hBN) is an emerging two dimensional material for quantum photonics owing to its large bandgap and hyperbolic properties. Here we report a broad range of multicolor room temperature single photon emissions across the visible and the near infrared spectral ranges from point defects in hBN multilayers. We show that the emitters can be categorized into two general groups, but most likely possess similar crystallographic structure. We further show two approaches for engineering of the emitters using either electron beam irradiation or annealing, and characterize their photophysical properties. The emitters exhibit narrow line widths of sub 10 nm at room temperature, and a short excited state lifetime with high brightness. Remarkably, the emitters are extremely robust and withstand aggressive annealing treatments in oxidizing and reducing environments. Our results constitute the first step towards deterministic engineering of single emitters in 2D materials and hold great promise for the use of defects in boron nitride as sources for quantum information processing and nanophotonics.

cond-mat.mtrl-sci↗

arXiv2016

Quantum Emission from Defects in Single Crystal Hexagonal Boron Nitride

Bulk hexagonal boron nitride (hBN) is a highly nonlinear natural hyperbolic material that attracts major attention in modern nanophotonics applications. However, studies of its optical properties in the visible part of the spectrum and quantum emitters hosted by bulk hBN have not been reported to date. In this work we study the emission properties of hBN crystals in the red spectral range using sub-bandgap optical excitation. Quantum emission from defects is observed at room temperature and characterized in detail. Our results advance the use of hBN in quantum nanophotonics technologies and enhance our fundamental understanding of its optical properties.

cond-mat.mtrl-sci↗

arXiv2015

Facile Self-Assembly of Quantum Plasmonic Circuit Components

Efficient coupling between solid state quantum emitters and plasmonic waveguides is important for the realization of integrated circuits for quantum information, communication and sensing. However, realization of plasmonic circuits is still scarce, particularly due to challenges associated with accurate positioning of quantum emitters near plasmonic resonators. Current pathways for the construction of plasmonic circuits involve cumbersome and costly methods such as scanning atomic force microscopy or mechanical manipulation, where individual elements are physically relocated using the scanning tip. Here, we introduce a simple, fast and cost effective chemical self-assembly method for the attachment of two primary components of a practical plasmonic circuit: a single photon emitter and a waveguide. Our method enables coupling of nanodiamonds with a single quantum emitter (the nitrogen-vacancy (NV) center) onto the terminal of a silver nanowire, by simply varying the concentration of ascorbic acid (AA) in a reaction solution. The AA concentration is used to control the extent of agglomeration, and can be optimised so as to cause preferential, selective activation of the tips of the nanowires. The nanowire-nanodiamond structures show efficient plasmonic coupling of fluorescence emission from single NV centers into surface plasmon polariton (SPP) modes, evidenced by a more than two-fold reduction in fluorescence lifetime and an increase in fluorescence intensity.

cond-mat.mtrl-sci↗