arXiv subjects

Tobias Feigl

Publications and source records attributed to Tobias Feigl.

At least 19 recordsLinked to original sources

arXiv2026

Analyzing and Characterizing Multi-Source Interference Effects at Jammertest Norway 2025

Intentional radio-frequency interference from low-cost GNSS jammers increasingly threatens the accuracy and reliability of satellite-based positioning. Mitigating this threat requires not only detection but also robust waveform classification and characterization, direction-of-arrival inference for localization, and impact estimation on receiver performance under realistic operating conditions; all of which are challenged by strong distribution shifts across devices, sensors, environments, and satellite geometries. We address these challenges by compiling a dedicated real-world dataset recorded during Jammertest 2025 (Andoya, Norway), covering two outdoor test areas with parallel measurements from a single-antenna E1/E5 receiver module and a 2x2 CRPA-array. The dataset spans diverse jamming, spoofing, and meaconing scenarios, including CW, PRN, sweep/chirp, and multi-emitter configurations, and is complemented by per-recording metadata enabling time-aligned ground truth. Methodologically, we benchmark 17 machine learning (ML) architectures for interference-modulation recognition and multi-task characterization (type, occupied bandwidth, and signal strength), and we quantify navigation-relevant degradation via a receiver-aware spectral separation coefficient (SSC) that maps measured spectra to effective (C_s/N_0)_{eff} loss. To enable multi-source analysis, we transfer a YOLOv8s and RF-DETR detector pretrained on a labeled spectrogram dataset to localize multiple simultaneous interferers in GNSS spectrograms and subsequently characterize each detected component. Results show near-99% within-area classification accuracy but substantial cross-area performance drops, highlighting the need for robustness to real-world domain shifts.

eess.SP↗

arXiv2026

ZK-Trace: Certified Collusion Tracing with Zero-Knowledge Credentials for Federated GNSS Interference Monitoring

Federated global navigation satellite system (GNSS) monitoring distributes a proprietary classifier to partly trusted stations, any of which may leak its copy. ZK-Trace combines public identity marks, recipient-specific Tardos fingerprints, and zero-knowledge credential verification. The registry supports offline tracing without the leaker's cooperation. We establish conditional false-accusation bounds for arbitrary recovered bit patterns, a finite completeness bound under a hidden-bias residual channel, and a deterministic tracing-score bound for correlated feature-distillation errors. An interval-arithmetic checker makes the conditional bound executable and allocates a common budget across accusation and tamper decisions. Under innocent-row independence, the certificate-based evaluation uses a false-naming budget of 0.001 per investigation. It isolates all 160 single-owner copies and traces 712 of 720 two-owner mixtures without naming an innocent. Experiments use a simulated GNSS federation and CIFAR-10. Feature matching preserves the feature mark in 20/20 runs and cross-architecture transfer in 19/20, at copy-accuracy costs of 4.8 and 6.1 percentage points on GNSS and CIFAR-10. Function-only distillation erases the feature mark, and distillation also removes weight-space marks. These results support verifiable tracing under explicit statistical and cryptographic assumptions. Credential knowledge and recipient evidence serve distinct roles.

cs.CR↗

arXiv2026

TwinMark: A Unified Watermark for Provable Survival Under Feature and Logit Distillation

We propose TwinMark, a watermarking scheme that reads a single SHAKE128 secret through two complementary linear functionals of model-output summaries: a covariance projector against the carrier-set covariance (cov-Feat) and a class-conditional Fisher-aligned linear carrier decoded from class-mean logits (cc-FALC). The two readouts share one bit vector and cover the two extraction surfaces of a deployed vision model: a classifier API attacked by KL knowledge distillation (KD) (Std. KL-KD), and a representation-only host attacked by feature-matching KD (FM-KD). Each readout admits a teacher-measurable a posteriori certificate that lower-bounds post-distillation detection power, and the two channels combine under a regime-restricted OR rule whose test statistic (calibrated null or bit vote) is selected by the exposed surface. cov-Feat admits a rank-blind operator-norm certificate, cc-FALC admits a centered-logit-gap certificate that decouples bit capacity from class count: at K=1024 in m=100 classes (a 10.24x over-encoding), the bit-vote attains z=23.0 sigma at a teacher-accuracy cost of +0.9+-0.2%p. Across 13 attacks on CIFAR-10, CIFAR-100, and Mini-ImageNet, TwinMark verifies on every cell whose post-attack model retains task utility, survives cross-architecture distillation onto ResNet-18/50, VGG-16, and MobileNet-V3, and ports to GNSS few-shot, VOC detection, ISIC segmentation, and STL-10 SimCLR.

cs.LG↗

arXiv2026

Active Sensing with Meta-Reinforcement Learning for Emitter Localization from RF Observations

Global navigation satellite system (GNSS) interference poses a serious threat to reliable positioning, especially in indoor and multipath-rich environments where source localization is highly challenging. In this paper, we formulate GNSS interference localization as an active sensing problem and propose a reinforcement learning (RL) framework in which an agent sequentially explores the environment to infer the position of an emitter source from radio frequency (RF) observations acquired with a 2x2 patch antenna. The localization task is modeled as a partially observable decision process, since single-snapshot measurements are often ambiguous under multipath propagation and changing channel conditions. To address this, the proposed framework combines high-dimensional RF sensing with deep RL and recurrent policy learning. We investigate both value-based and policy-based approaches, namely Deep Q-Networks (DQN) and Proximal Policy Optimization (PPO), and study their behavior under domain shift. The approach is evaluated on a simulated dataset generated with the Sionna ray-tracing module, which provides realistic propagation effects and diverse environment configurations. Experimental results show that the proposed method achieves a localization success rate of 80.1, demonstrating the potential of RL for adaptive GNSS interference localization. Overall, the results highlight simulation-assisted training as a promising direction for robust interference localization in challenging propagation environments.

eess.SP↗

arXiv2026

The S-ICDF Dataset: Sionna-Simulated Dynamic Interference Characterization and Direction Finding

Jamming and spoofing threaten wireless and satellite navigation by disrupting or manipulating radio frequency (RF) signals, undermining availability, integrity, and trust. Robust interference monitoring (i.e., detection, classification, characterization, and direction finding) is therefore essential to identify and localize anomalous signals. While machine learning (ML) promises improved performance in complex environments, its development and validation depend on large-scale datasets that capture realistic signal and channel variability. Collecting such data in the real world is difficult because intentional jamming is illegal and ground-truth attribution is confounded by propagation, hardware, and environmental effects. To address this gap, we create and publish S-ICDF, a large-scale indoor interference dataset generated with Sionna, a GPU-accelerated simulation library for physical-layer wireless communications. S-ICDF covers 102 interference configurations, including diverse antenna array patterns, bandwidths, and simulation settings such as noise level and reflection depth. We further provide baseline results by benchmarking S-ICDF with classical estimation and direction finding (DF) methods (MUSIC, ESPRIT, and CAPON) and with modern ML approaches. The dataset is publicly available at: https://gitlab.cc-asp.fraunhofer.de/darcy_gnss/sicdf_dataset

eess.SP↗

arXiv2026

GenAI for Energy-Efficient and Interference-Aware Compressed Sensing of GNSS Signals on a Google Edge TPU

Traditional methods for classifying global navigation satellite system (GNSS) jamming signals typically involve post-processing raw or spectral data streams, requiring complex and costly data transmission to cloud-based interference classification systems. In contrast, our proposed approach efficiently compresses GNSS data streams directly at the hardware receiver while simultaneously classifying jamming and spoofing attacks in real time. Given the growing prevalence of GNSS jamming, there is a critical need for real-time solutions suitable for power-constrained environments. This paper introduces a novel method for compressing and classifying GNSS jamming threats using generative artificial intelligence (GenAI), specifically variational autoencoders (VAEs), deployed on Google Edge tensor processing units (TPUs). The study evaluates various autoencoder (AE) architectures to compress and reconstruct GNSS signals, focusing on preserving interference characteristics while minimizing data size near the receiver hardware. The pipeline adapts large-scale AE models for Google Edge TPUs through 8-bit quantization to ensure energy-efficient deployment. Tests on raw in-phase and quadrature-phase (IQ) data, Fast Fourier Transform (FFT) data, and handcrafted features show the system achieves significant compression (>42x) and accurate classification of approximately 72 interference types on reconstructed signals (F2-score 0.915), closely matching the original signals (F2-score 0.923). The hardware-centric GenAI approach also substantially reduces jammer signal transmission costs, offering a practical solution for interference mitigation. Ablation studies on conditional and factorized VAEs (i.e., FactorVAE) explore latent feature disentanglement for data generation, enhancing model interpretability and fostering trust in machine learning (ML) solutions for sensitive interference applications.

cs.LG↗

arXiv2026

PDRNN: Modular Data-driven Pedestrian Dead Reckoning on Loosely Coupled Radio- and Inertial-Signalstreams

Modern pedestrian dead reckoning (PDR) systems rely on fusing noisy and biased estimates of position, velocity, and calibrated orientation derived from loosely coupled sensors to determine the current pose of a localized object. However, discrepancies in the sampling rates of sensor-specific estimation methods and unreliable transmission pose significant challenges. And traditional methods often fail to effectively fuse multimodal sensor data during dynamic movements characterized by high accelerations, velocities, and rapidly varying orientations. To address these limitations, we propose a simple recurrent neural network (RNN) architecture capable of implicitly forecasting asynchronous sensor data streams from diverse estimation methods along reference trajectories. The proposed approach introduces PDRNN, a modular hybrid AI-assisted PDR system that handles each component as an independent ensemble of machine learning (ML) models to estimate both key parameter means and variances. Separate ML-based models are employed to estimate orientation, (un)directed velocity or distance from acceleration and gyroscope data, with optional absolute positioning from synchronized radio systems such as 5G for stabilization. A final fusion model combines these outputs, position, velocity, and orientation, while using uncertainty estimates to enhance system robustness. The modular design allows individual components to be updated, fine-tuned, or replaced without affecting the entire system. Experiments on dynamic sports movement data show that PDRNN achieves superior accuracy and precision compared to classic and ML-based methods, effectively avoiding error accumulation common in black-box approaches. And PDRNN offers forecast capabilities and better component control despite increased system complexity.

cs.LG↗

arXiv2026

Exploitation of Hidden Context in Dynamic Movement Forecasting: A Neural Network Journey from Recurrent to Graph Neural Networks and General Purpose Transformers

Forecasting within signal processing pipelines is crucial for mitigating delays, particularly in predicting the dynamic movements of objects such as NBA players. This task poses significant challenges due to the inherently interactive and unpredictable nature of sports, where abrupt changes in velocity and direction are prevalent. Traditional approaches, including (S)ARIMA(X), Kalman filters (KF), and Particle filters (PF), often struggle to model the non-linear dynamics present in such scenarios. Machine learning (ML) methods, such as long short-term memory (LSTM) networks, graph neural networks (GNNs), and Transformers, offer greater flexibility and accuracy but frequently fail to explicitly capture the interplay between temporal dependencies and contextual interactions, which are critical in chaotic sports environments. In this paper, we evaluate these models and assess their strengths and weaknesses. Experimental results reveal key performance trade-offs across input history length, generalizability, and the ability to incorporate contextual information. ML-based methods demonstrated substantial improvements over linear models across forecast horizons of up to 2s. Among the tested architectures, our hybrid LSTM augmented with contextual information achieved the lowest final displacement error (FDE) of 1.51m, outperforming temporal convolutional neural network (TCNN), graph attention network (GAT), and Transformers, while also requiring less data and training time compared to GAT and Transformers. Our findings indicate that no single architecture excels across all metrics, emphasizing the need for task-specific considerations in trajectory prediction for fast-paced, dynamic environments such as NBA gameplay.

cs.LG↗

arXiv2026

Resilient Channel Charting Under Varying Radio Link Availability

Channel charting (CC) has become a key technology for RF-based localization, enabling unsupervised radio fingerprinting, even in non line of sight scenarios, with a minimum of reference position labels. However, most CC models assume fixed-size inputs, such as a constant number of antennas or channel measurements. In practical systems, antennas may fail, signals may be blocked, or antenna sets may change during handovers, making fixed-input architectures fragile. Existing radio-fingerprinting approaches address this by training separate models for each antenna configuration, but the resulting training effort scales prohibitively with the array size. We propose Adaptive Positioning (AdaPos), a CC architecture that natively handles variable numbers of channel measurements. AdaPos combines convolutional feature extraction with a transformer-based encoder using learnable antenna identifiers and self-attention to fuse arbitrary subsets of CSI inputs. Experiments on two public real-world datasets (SISO and MIMO) show that AdaPos maintains state-of-the-art accuracy under missing-antenna conditions and replaces roughly 57 configuration-specific models with a single unified model. With AdaPos and our novel training strategies, we provide resilience to both individual antenna failures and full-array outages.

eess.SP↗

arXiv2026

Simplicity is Key: An Unsupervised Pretraining Approach for Sparse Radio Channels

Unsupervised representation learning for wireless channel state information (CSI)reduces reliance on labeled data, thereby lowering annotation costs, and often improves performance on downstream tasks. However, state-of-the-art approaches take little or no account of domain-specific knowledge, forcing the model to learn well-known concepts solely from data. We introduce Sparse pretrained Radio Transformer (SpaRTran), a hybrid method based on the concept of compressed sensing for wireless channels. In contrast to existing work, SpaRTran builds around a wireless channel model that constrains the optimization procedure to physically meaningful solutions and induces a strong inductive bias. Compared to the state of the art, SpaRTran cuts positioning error by up to 28% and increases top-1 codebook selection accuracy for beamforming by 26 percentage points. Our results show that capturing the sparse nature of radio propagation as an unsupervised learning objective improves performance for network optimization and radio-localization tasks.

eess.SP↗

arXiv2025

GNSS Jammer Direction Finding in Dynamic Scenarios Using an Inertial-based Multi-Antenna System

Jamming devices disrupt signals from the global navigation satellite system (GNSS) and pose a significant threat by compromising the reliability of accurate positioning. Consequently, the detection and localization of these interference signals are essential to achieve situational awareness, mitigating their impact, and implementing effective countermeasures. In this paper, we utilize a two-times-two patch antenna system (i.e., the software defined radio device Ettus USRP X440) to predict the angle, elevation, and distance to the jamming source based on in-phase and quadrature (IQ) samples. We propose to use an inertial measurement unit (IMU) attached to the antenna system to predict the relative movement of the antenna in dynamic scenarios. We present a synthetic aperture system that enables coherent spatial imaging using platform motion to synthesize larger virtual apertures, offering superior angular resolution without mechanically rotating antennas. While classical angle-of-arrival (AoA) methods exhibit reduced accuracy in multipath environments due to signal reflections and scattering, leading to localization errors, we utilize a methodology that fuses IQ and Fast Fourier Transform (FFT)-computed spectrograms with 22 AoA features and the predicted relative movement to enhance GNSS jammer direction finding.

eess.SP↗

arXiv2025

Attention-Based Fusion of IQ and FFT Spectrograms with AoA Features for GNSS Jammer Localization

Jamming devices disrupt signals from the global navigation satellite system (GNSS) and pose a significant threat by compromising the reliability of accurate positioning. Consequently, the detection and localization of these interference signals are essential to achieve situational awareness, mitigating their impact, and implementing effective counter-measures. Classical Angle of Arrival (AoA) methods exhibit reduced accuracy in multipath environments due to signal reflections and scattering, leading to localization errors. Additionally, AoA-based techniques demand substantial computational resources for array signal processing. In this paper, we propose a novel approach for detecting and classifying interference while estimating the distance, azimuth, and elevation of jamming sources. Our benchmark study evaluates 128 vision encoder and time-series models to identify the highest-performing methods for each task. We introduce an attention-based fusion framework that integrates in-phase and quadrature (IQ) samples with Fast Fourier Transform (FFT)-computed spectrograms while incorporating 22 AoA features to enhance localization accuracy. Furthermore, we present a novel dataset of moving jamming devices recorded in an indoor environment with dynamic multipath conditions and demonstrate superior performance compared to state-of-the-art methods.

eess.SP↗

arXiv2025

Passive Channel Charting: Locating Passive Targets using a UWB Mesh

Fingerprint-based passive localization enables high localization accuracy using low-cost UWB IoT radio sensors. However, fingerprinting demands extensive effort for data acquisition. The concept of channel charting reduces this effort by modeling and projecting the manifold of \ac{csi} onto a 2D coordinate space. So far, researchers only applied this concept to active radio localization, where a mobile device intentionally and actively emits a specific signal. In this paper, we apply channel charting to passive localization. We use a pedestrian dead reckoning (PDR) system to estimate a target's velocity and derive a distance matrix from it. We then use this matrix to learn a distance-preserving embedding in 2D space, which serves as a fingerprinting model. In our experiments, we deploy six nodes in a fully connected ultra-wideband (UWB) mesh network to show that our method achieves high localization accuracy, with an average error of just 0.24\,m, even when we train and test on different targets.

eess.SP↗

arXiv2025

Evaluating ML Robustness in GNSS Interference Classification, Characterization & Localization

Jamming devices disrupt signals from the global navigation satellite system (GNSS) and pose a significant threat, as they compromise the robustness of accurate positioning. The detection of anomalies within frequency snapshots is crucial to counteract these interferences effectively. A critical preliminary countermeasure involves the reliable classification of interferences and the characterization and localization of jamming devices. This paper introduces an extensive dataset comprising snapshots obtained from a low-frequency antenna that capture various generated interferences within a large-scale environment, including controlled multipath effects. Our objective is to assess the resilience of machine learning (ML) models against environmental changes, such as multipath effects, variations in interference attributes, such as interference class, bandwidth, and signal power, the accuracy of jamming device localization, and the constraints imposed by snapshot input lengths. Furthermore, we evaluate the performance of a diverse set of 129 distinct vision encoder models across all tasks. By analyzing the aleatoric and epistemic uncertainties, we demonstrate the adaptability of our model in generalizing across diverse facets, thus establishing its suitability for real-world applications. Dataset: https://gitlab.cc-asp.fraunhofer.de/darcy_gnss/controlled_low_frequency

cs.AI↗

arXiv2025

VAE-based Feature Disentanglement for Data Augmentation and Compression in Generalized GNSS Interference Classification

Distributed learning and Edge AI necessitate efficient data processing, low-latency communication, decentralized model training, and stringent data privacy to facilitate real-time intelligence on edge devices while reducing dependency on centralized infrastructure and ensuring high model performance. In the context of global navigation satellite system (GNSS) applications, the primary objective is to accurately monitor and classify interferences that degrade system performance in distributed environments, thereby enhancing situational awareness. To achieve this, machine learning (ML) models can be deployed on low-resource devices, ensuring minimal communication latency and preserving data privacy. The key challenge is to compress ML models while maintaining high classification accuracy. In this paper, we propose variational autoencoders (VAEs) for disentanglement to extract essential latent features that enable accurate classification of interferences. We demonstrate that the disentanglement approach can be leveraged for both data compression and data augmentation by interpolating the lower-dimensional latent representations of signal power. To validate our approach, we evaluate three VAE variants - vanilla, factorized, and conditional generative - on four distinct datasets, including two collected in controlled indoor environments and two real-world highway datasets. Additionally, we conduct extensive hyperparameter searches to optimize performance. Our proposed VAE achieves a data compression rate ranging from 512 to 8,192 and achieves an accuracy up to 99.92%.

cs.LG↗

arXiv2025

Bayesian Learning-driven Prototypical Contrastive Loss for Class-Incremental Learning

The primary objective of methods in continual learning is to learn tasks in a sequential manner over time (sometimes from a stream of data), while mitigating the detrimental phenomenon of catastrophic forgetting. This paper proposes a method to learn an effective representation between previous and newly encountered class prototypes. We propose a prototypical network with a Bayesian learning-driven contrastive loss (BLCL), tailored specifically for class-incremental learning scenarios. We introduce a contrastive loss that incorporates novel classes into the latent representation by reducing intra-class and increasing inter-class distance. Our approach dynamically adapts the balance between the cross-entropy and contrastive loss functions with a Bayesian learning technique. Experimental results conducted on the CIFAR-10, CIFAR-100, and ImageNet100 datasets for image classification and images of a GNSS-based dataset for interference classification validate the efficacy of our method, showcasing its superiority over existing state-of-the-art approaches. Git: https://gitlab.cc-asp.fraunhofer.de/darcy_gnss/gnss_class_incremental_learning

cs.CV↗

arXiv2025

Evaluation of (Un-)Supervised Machine Learning Methods for GNSS Interference Classification with Real-World Data Discrepancies

The accuracy and reliability of vehicle localization on roads are crucial for applications such as self-driving cars, toll systems, and digital tachographs. To achieve accurate positioning, vehicles typically use global navigation satellite system (GNSS) receivers to validate their absolute positions. However, GNSS-based positioning can be compromised by interference signals, necessitating the identification, classification, determination of purpose, and localization of such interference to mitigate or eliminate it. Recent approaches based on machine learning (ML) have shown superior performance in monitoring interference. However, their feasibility in real-world applications and environments has yet to be assessed. Effective implementation of ML techniques requires training datasets that incorporate realistic interference signals, including real-world noise and potential multipath effects that may occur between transmitter, receiver, and satellite in the operational area. Additionally, these datasets require reference labels. Creating such datasets is often challenging due to legal restrictions, as causing interference to GNSS sources is strictly prohibited. Consequently, the performance of ML-based methods in practical applications remains unclear. To address this gap, we describe a series of large-scale measurement campaigns conducted in real-world settings at two highway locations in Germany and the Seetal Alps in Austria, and in large-scale controlled indoor environments. We evaluate the latest supervised ML-based methods to report on their performance in real-world settings and present the applicability of pseudo-labeling for unsupervised learning. We demonstrate the challenges of combining datasets due to data discrepancies and evaluate outlier detection, domain adaptation, and data augmentation techniques to present the models' capabilities to adapt to changes in the datasets.

cs.CV↗

arXiv2025

Multimodal-to-Text Prompt Engineering in Large Language Models Using Feature Embeddings for GNSS Interference Characterization

Large language models (LLMs) are advanced AI systems applied across various domains, including NLP, information retrieval, and recommendation systems. Despite their adaptability and efficiency, LLMs have not been extensively explored for signal processing tasks, particularly in the domain of global navigation satellite system (GNSS) interference monitoring. GNSS interference monitoring is essential to ensure the reliability of vehicle localization on roads, a critical requirement for numerous applications. However, GNSS-based positioning is vulnerable to interference from jamming devices, which can compromise its accuracy. The primary objective is to identify, classify, and mitigate these interferences. Interpreting GNSS snapshots and the associated interferences presents significant challenges due to the inherent complexity, including multipath effects, diverse interference types, varying sensor characteristics, and satellite constellations. In this paper, we extract features from a large GNSS dataset and employ LLaVA to retrieve relevant information from an extensive knowledge base. We employ prompt engineering to interpret the interferences and environmental factors, and utilize t-SNE to analyze the feature embeddings. Our findings demonstrate that the proposed method is capable of visual and logical reasoning within the GNSS context. Furthermore, our pipeline outperforms state-of-the-art machine learning models in interference classification tasks.

cs.AI↗