Searcharxiv⌕ Search

arXiv subjects

Uriel Levy

Publications and source records attributed to Uriel Levy.

At least 37 records · Page 2Linked to original sources
arXiv2021

Opto-thermal transport engineering in hybrid organic-inorganic lead halide perovskites metasurfaces

Halide perovskites have recently gained widespread attention for their exceptional optoelectronic properties which have been illuminated by extensive spectroscopic investigations. In this article, nanophotonic surface-engineering using soft-lithography has been used to reproduce nanostructures with enhanced functionalities. A non-invasive optical technique based on Raman and photolumines-cence (PL) spectroscopy is employed to investigate the interactive effect of the thermal and optical behaviour in surface-patterned hybrid organic-inorganic halide perovskite thin films. The thermophys-ical properties of the engineered perovskite films are extracted from the softening of the representa-tive peak positions in the Raman and PL spectra of the samples which act as temperature markers. The investigation suggests a comparatively higher rise in the local temperature for the patterned thin films resulting from their enhanced absorption. Therefore, a cross-talk between the opto-thermal transport phenomena in imprinted perovskite thin films pertaining to both enhancing device properties along with maintaining device stability is established.

physics.app-ph↗
arXiv2021

Photo memtransistor based on CMOS flash memory technology on Graphene with neuromorphic applications

Graphene holds a great promise for a number of diverse future applications, in particular related to its easily tunable doping and Fermi level by electrostatic gating. However, as of today, most implementations rely on electrical doping via the application of continuous large voltages to maintain the desired doping. We show here how graphene can be implemented with conventional semiconductor flash memory technology in order to make programmable doping possible, simply by the application of short gate pulses. We also demonstrate how this approach can be used for a memory device, and also show potential neuromorphic capabilities of the device. Finally, we show that the overall performance can be significantly enhanced by illuminating the device with UV radiation. Our approach may pave the way for integrating graphene in CMOS technology memory applications, and our device design could also be suitable for large scale neuromorphic computing structures.

cond-mat.mes-hall↗
arXiv2021

Chiral light-matter interactions in hot vapor cladded waveguides

Recently, there is growing interest in integrating alkali vapors with nanoscale photonic structures, such as nano-waveguides, resonators and nanoantennas. Nanoscale confinement of electromagnetic fields may introduce a longitudinal electric field component, giving rise to circularly polarized modes which are essential for diverse applications involving vapor and light, such as chirality and non-reciprocity. Hereby, we have designed, fabricated and characterized a miniaturized vapor cell that is integrated with optical waveguides that are designed to generate a peculiar circular-like polarization. Taking advantage of this phenomenon, we demonstrate a spectral shift in the atomic absorption signatures at varying magnetic fields, and significant isolation between forward and backward propagating waves in our atomic-cladded waveguide. Our results pave the way for the utilization of chip-scale integrated atomic devices in applications such as optical isolation and high spatial resolution magnetometry.

physics.optics↗
arXiv2020

Achromatic diffractive lens limits

Over the recent years, there have been many reports of achromatic metalenses and diffractive lenses. However, very few (if any) practical applications of such achromatic flat lenses have been demonstrated, which raises questions about the potential of these lenses to provide solutions for real world cases which involve broadband illumination. A recent paper placed limits on the performance of achromatic metalenses. However, is this limit also valid for a diffractive lens? Not necessarily so. In this paper we derive the limits on the performance of achromatic diffractive lenses. In particular, we show that achromatic diffractive lenses can cover a wide spectral range, limited only by loss of efficiency caused by manufacturing limitations related to feature depth and size. On the other hand, we show that achromatic diffractive lenses can provide near diffraction limited performance only at very low Fresnel numbers, i.e. they cannot provide large focusing power and broadband response simultaneously. We then go on to compare the limits of achromatic metalenses and diffractive lenses, in attempt to understand the potential of different types of flat lenses. Our findings may set the ground for better evaluation of flat lens performance, understanding of their capabilities and limitations, and for exploring novel design concepts and applications.

physics.optics↗
arXiv2019

Generating hot carriers in plasmonic nanoparticles: when quantization does and does not matter?

Plasmon-assisted hot carrier processes in metal nanoparticles can be described either classically or using the full strength of quantum mechanics. We reconfirm that from the practical applications point of view, when it comes to description of the decay of plasmons in nanoparticles, classical description is sufficiently adequate for all but the smallest of the nanoparticles. At the same time, the electron temperature rise in nanoparticles is discrete (quantized) and neglecting this fact can lead to significant underestimating of hot carrier assisted effects, such as photo-catalysis.

physics.optics↗
arXiv2019

Giant enhancement of silicon plasmonic SWIR photodetection using nanoscale self-organised metallic films

Many consumer technologies and scientific methods rely on photodetection of infrared light. We report a Schottky photodetector operating below silicon's band gap energy, through hot carrier injection from a nanoscale metallic absorber. Our design relies on simple CMOS-compatible 'bottom up' fabrication of fractally nanostructured aluminium films. Due to the fractal nature of the nanostructuring, the aluminium films support plasmonically enhanced absorption over a wide wavelength range. We demonstrate two orders of magnitude improvements of responsivity, noise-equivalent-power, and detectivity as compared to bulk metal, over a broad spectral and angular range. We attribute this to momentum relaxation processes from the nanoscale fractal geometry. Specifically, we demonstrate a direct link between quantum efficiency enhancement and structural parameters such as perimeter to surface ratio. Finally, our devices also function as bulk refractive index sensors. Our approach is a promising candidate for future cost effective and robust short wave infrared photodetection and sensing applications.

cond-mat.mes-hall↗
arXiv2019

Enhanced spin state readout of Nitrogen-Vacancy centers in diamond using IR fluorescence

Nitrogen-Vacancy (NV) centers in diamond have been used in recent years for a wide range of applications, from nano-scale NMR to quantum computation. These applications depend strongly on the efficient readout of the NV center's spin state, which is currently limited. Here we suggest a method of reading the NV center's spin state, using the weak optical transition in the singlet manifold. We numerically calculate the number of photons collected from each spin state using this technique, and show that an order of magnitude enhancement in spin readout signal-to-noise ratio is expected, making single-shot spin readout within reach. Thus, this method could lead to an order of magnitude enhancement in sensitivity for ubiquitous NV based sensing applications, and remove a major obstacle from using NVs for quantum information processing.

quant-ph↗
arXiv2019

Near-IR wide field-of-view Huygens metalens for outdoor imaging applications

The ongoing effort to implement compact and cheap optical systems is the main driving force for the recent flourishing research in the field of optical metalenses. Metalenses are a type of metasurface, used for focusing and imaging applications, and are implemented based on the nanopatterning of an optical surface. The challenge faced by metalens research is to reach high levels of performance, using simple fabrication methods suitable for mass-production. In this paper we present a Huygens nanoantenna based metalens, designed for outdoor photographic/surveillance applications in the near-infra-red. We show that good imaging quality can be obtained over a field-of-view (FOV) as large as +/-15 degrees. This first successful implementation of metalenses for outdoor imaging applications is expected to provide insight and inspiration for future metalens imaging applications.

physics.optics↗
arXiv2018

Efficient optical pumping of alkaline atoms for evanescent fields at dielectric-vapor interfaces

We experimentally demonstrate hyperfine optical pumping of rubidium atoms probed by an evanescent electromagnetic field at a dielectric-vapor interface. This light-atom interaction at the nanoscale is investigated using a right angle prism integrated with a vapor cell and excited by evanescent wave under total internal reflection. An efficient hyperfine optical pumping, leading to a complete suppression of absorption on the probed evanescent signal, is observed when a pump laser beam is sent at normal incidence to the interface. In contrast, when the pump and probe beams are co-propagating in the integrated prism-vapor cell, no clear evidence of optical pumping is observed. The experimental results are supported by a detailed model based on optical Bloch equation of a four atomic levels structure. The obtained on-chip highly efficient optical pumping at the nanoscale is regarded as an important step in the quest for applications such as optical switching, magnetometry and quantum memory.

quant-ph↗
arXiv2018

Holographic Resonant Laser Printing of metasurfaces using plasmonic template

Laser printing with a spatial light modulator (SLM) has several advantages over conventional raster-writing and dot-matrix display (DMD) writing: multiple pixel exposure, high power endurance and existing software for computer generated holograms (CGH). We present a technique for the design and manufacturing of plasmonic metasurfaces based on ultrafast laser printing with an SLM. As a proof of principle, we have used this technique to laser print a plasmonic metalens as well as high resolution plasmonic color decorations. The high throughput holographic resonant laser printing (HRLP) approach enables on-demand mass-production of customized metasurfaces.

cond-mat.mes-hall↗
arXiv2017

Post trimming of silicon photonics microresonators by nanoscale flash memory technology

Flash memory technology is widely common in modern microelectronics, and is essentially affecting our daily life. Considering the recent progress in photonic circuitry, and in particular silicon photonics circuitry, there is now an opportunity to embed the flash memory technology in photonic applications. A particularly promising candidate that can benefit from such integration is the photonic resonator. As of today, chip scale resonators are essential building blocks in modern silicon photonic platform. However, their properties, and in particular their resonance frequencies deviate from their designed values due to unavoidable fabrication imperfections, imposing a stringent limitation on the applicability of such devices. Here we present a solution for this major obstacle and demonstrate electrical approach for post trimming of such resonators. This is achieved by integrating the well-established flash memory technology into the photonic circuitry. More specifically, we use the nanoscale Silicon-Oxide-Nitride-Oxide-Silicon (SONOS) structure in order to trap charges in the thin silicon nitride layer, which is located in close proximity to the silicon device layer. This enables the accumulation of charges in the silicon, modifying the effective index of the optical mode and consequently the resonance frequency. By doing so, we provide a robust and elegant CMOS compatible memory solution, which can be easily manufactured and commercialized. We expect such an approach to pave the way for even more efficient utilization of resonators and interferometers in chip scale photonic and electro optic systems, with wide range of applications such as filters, modulators, sensors, and lasers, to name a few.

physics.app-ph↗
arXiv2016

On-chip detection of radiation guided by dielectric-loaded plasmonic waveguides

We report a novel approach for on-chip electrical detection of the radiation guided by dielectric-loaded surface plasmon polariton waveguides (DLSPPW) and DLSPPW-based components. The detection is realized by fabricating DLSPPW components on the surface of a gold (Au) pad supported by a silicon (Si) substrate supplied with aluminum pads facilitating electrical connections, with the gold pad being perforated in a specific locations below the DLSPPWs in order to allow a portion of the DLSPPW-guided radiation to leak into the Si-substrate, where it is absorbed and electrically detected. We present two-dimensional photocurrent maps obtained when the laser beam is scanning across the gold pad containing the fabricated DLSPPW components that are excited via grating couplers located at the DLSPPW tapered terminations. By comparing photocurrent signals obtained when scanning over a DLSPPW straight waveguide with those related to a DLSPPW racetrack resonator, we first determine the background signal level and then the corrected DLSPPW resonator spectral response, which is found consistent with that obtained from full wave numerical simulations. The approach developed can be extended to other plasmonic waveguide configurations and advantageously used for rapid characterization of complicated plasmonic circuits.

physics.optics↗
arXiv2016

Enhanced light-vapor interactions and all optical switching in a chip scale micro-ring resonator coupled with atomic vapor

The coupling of atomic and photonic resonances serves as an important tool for enhancing light-matter interactions and enables the observation of multitude of fascinating and fundamental phenomena. Here, by exploiting the platform of atomic-cladding wave guides, we experimentally demonstrate the resonant coupling of rubidium vapor and an atomic cladding micro ring resonator. Specifically, we observed cavity-atom coupling in the form of Fano resonances having a distinct dependency on the relative frequency detuning between the photonic and the atomic resonances. Moreover, we were able to significantly enhance the efficiency of all optical switching in the V-type pump-probe scheme. The coupled system of micro-ring resonator and atomic vapor is a promising building block for a variety of light vapor experiments, as it offers a very small footprint, high degree of integration and extremely strong confinement of light and vapor. As such it may be used for important applications, such as all optical switching, dispersion engineering (e.g. slow and fast light) and metrology, as well as for the observation of important effects such as strong coupling, Purcell enhancement and bistability.

physics.optics↗
arXiv2016

Strong coupling and high contrast all optical modulation in atomic cladding waveguides

In recent years we are witnessing a flourish in research aimed to facilitate alkali vapors in guided wave configurations. Owing to the significant reduction in device dimensions, the increase in density of states, the interaction with surfaces and primarily the high intensities carried along the structure, a rich world of light vapor interactions can be studied, and new functionalities, e.g. low power nonlinear light-matter interactions can be achieved. One immense remaining challenge is to study the effects of quantum coherence and shifts in such nano-scale waveguides, characterized by ultra-small mode areas and fast dynamics. Here, we construct a serpentine silicon-nitride wave guide, having atomic vapor as its cladding. The unprecedented mode volume of 5e-13 m^3 supported over a length of 17 mm is used to demonstrate efficient linear and non-linear spectroscopy. Fascinating and important phenomena such as van der Waals shifts, dynamical stark shifts, and coherent effects such as strong coupling (in the form of Autler Townes splitting) are all observed. The serpentine atomic cladding is a promising building block for a variety of light vapor experiments, as it offers a very small footprint, enables operation with relatively low density of atoms and extremely strong confinement of light and vapor. As such it may be used for important applications, such as all optical switching, frequency referencing, and magnetometry to name a few.

physics.optics↗
arXiv2015

On-chip integrated, silicon-graphene plasmonic Schottky photodetector, with high responsivity and avalanche photogain

We report an on-chip integrated metal-graphene-silicon plasmonic Schottky photodetector with 85mA/W responsivity at 1.55 um and 7% internal quantum efficiency. This is one order of magnitude higher than metal-silicon Schottky photodetectors operated in the same conditions. At a reverse bias of 3V, we achieve avalanche multiplication, with 0.37A/W responsivity and avalanche photogain~2. This paves the way to graphene integrated silicon photonics.

cond-mat.mes-hall↗
arXiv2015

Interactions of space-variant polarization beams with Zeeman-shifted rubidium vapor

Space variant beams are of great importance as a variety of applications have emerged in recent years. As such, manipulation of their degrees of freedom is highly desired. Here, by exploiting the circular dichroism and circular birefringence in a Zeeman-shifted Rb medium, we study the general interaction of space variant beams with such a medium. We present two particular cases of radial polarization and hybrid polarization beams where the control of the polarization states is demonstrated experimentally. Moreover, we show that a Zeeman-shifted atomic system can be used as an analyzer for such space variant beams

physics.optics↗
arXiv2014

Subdiffraction-limited imaging based on longitudinal modes in a spatially dispersive slab

It was proposed that a flat silver layer could be used to form a sub-diffraction limited image when illuminated near its surface plasmon resonance frequency [J. B. Pendry, Phys. Rev. Lett. 86, 3966 (2000)]. In this paper, we study the possibility of obtaining sub diffraction resolution using a different mechanism, with no surface plasmons involved. Instead, by taking into account the non-local response of a thin silver slab, we show that longitudinal modes contribute to the formation of a sub-diffraction limited image in a frequency regime above the plasma frequency. The differences between these two distinct mechanisms are studied and explained.

physics.optics↗