Searcharxiv⌕ Search

arXiv subjects

W. Walukiewicz

Publications and source records attributed to W. Walukiewicz.

16 recordsLinked to original sources
arXiv2018

Bistable Amphoteric Native Defect Model of Perovskite Photovoltaics

The past few years have witnessed unprecedented rapid improvement of the performance of a new class of photovoltaics based on halide perovskites. This progress has been achieved even though there is no generally accepted mechanism of the operation of these solar cells. Here we present a model based on bistable amphoteric native defects that accounts for all key characteristics of these photovoltaics and explains many idiosyncratic properties of halide perovskites. We show that a transformation between donor-like and acceptor-like configurations leads to a resonant interaction between amphoteric defects and free charge carriers. This interaction, combined with the charge transfer from the perovskite to the electron and hole transporting layers results in the formation of a dynamic n-i-p junction whose photovoltaic parameters are determined by the perovskite absorber. The model provides a unified explanation for the outstanding properties of the perovskite photovoltaics, including hysteresis of J-V characteristics and ultraviolet light-induced degradation.

cond-mat.mtrl-sci↗
arXiv2018

THz Transient Photoconductivity of the III-V Dilute Nitride GaPAsN

THz Time-Resolved Photoconductivity is used to probe carrier dynamics in the dilute III-V nitride GaP0.49As0.47N0.036. In these measurements a femtosecond optical pump-pulse excites electron-hole pairs, and a delayed THz pulse measures the change in conductivity. We find the photoconductivity is dominated by localized carriers. The decay of photoconductivity after excitation is consistent with bimolecular electron-hole recombination with recombination constant r = 3.2E-8 +/-0.8E-8 cm3/s. We discuss the implications for applications in solar energy.

cond-mat.mtrl-sci↗
arXiv2016

Carrier Lifetimes in a III-V-N Intermediate Band Semiconductor

We have used transient absorption spectroscopy to measure carrier lifetimes in the multiband band semiconductor GaPAsN. These measurements probe the electron populations in the conduction band, intermediate band and valance band as a function of time after an excitation pulse. Following photoexcitation of GaP0.32As0.67N0.01 we find that the electron population in the conduction band decays exponentially with a time constant 23ps. The electron population in the intermediate band exhibits bimolecular recombination with recombination constant r = 2 10^-8 cm-3/s. In our experiment an optical pump pulse excited electrons from the valance band to the intermediate and conduction bands, and the change in interband absorption due to absorption saturation and induced absorption was probed with a delayed white light pulse. We modeled the optical properties of our samples using the band anti-crossing model to extract carrier densities as a function of time. These results indicate that the minority carrier lifetimes are too short for efficient solar power conversion and that improvements in material quality will be required for practical applications of GaPAsN based intermediate band solar cells.

cond-mat.mtrl-sci↗
arXiv2012

Controlling Curie temperature in (Ga,Ms)As through location of the Fermi level within the impurity band

The ferromagnetic semiconductor (Ga,Mn)As has emerged as the most studied material for prototype applications in semiconductor spintronics. Because ferromagnetism in (Ga,Mn)As is hole-mediated, the nature of the hole states has direct and crucial bearing on its Curie temperature TC. It is vigorously debated, however, whether holes in (Ga,Mn)As reside in the valence band or in an impurity band. In this paper we combine results of channeling experiments, which measure the concentrations both of Mn ions and of holes relevant to the ferromagnetic order, with magnetization, transport, and magneto-optical data to address this issue. Taken together, these measurements provide strong evidence that it is the location of the Fermi level within the impurity band that determines TC through determining the degree of hole localization. This finding differs drastically from the often accepted view that TC is controlled by valence band holes, thus opening new avenues for achieving higher values of TC.

cond-mat.mtrl-sci↗
arXiv2008

Metal-insulator transition by isovalent anion substitution in Ga1-xMnxAs: Implications to ferromagnetism

We have investigated the effect of partial isovalent anion substitution in Ga1-xMnxAs on electrical transport and ferromagnetism. Substitution of only 2.4% of As by P induces a metal-insulator transition at a constant Mn doping of x=0.046 while the replacement of 0.4 % As with N results in the crossover from metal to insulator for x=0.037. This remarkable behavior is consistent with a scenario in which holes located within an impurity band are scattered by alloy disorder in the anion sublattice. The shorter mean free path of holes, which mediate ferromagnetism, reduces the Curie temperature TC from 113 K to 60 K (100 K to 65 K) upon the introduction of 3.1 % P (1% N) into the As sublattice.

cond-mat.mtrl-sci↗
arXiv2005

Effect of Native Defects on Optical Properties of InxGa1-xN Alloys

The energy position of the optical absorption edge and the free carrier populations in InxGa1-xN ternary alloys can be controlled using high energy 4He+ irradiation. The blue shift of the absorption edge after irradiation in In-rich material (x > 0.34) is attributed to the band-filling effect (Burstein-Moss shift) due to the native donors introduced by the irradiation. In Ga-rich material, optical absorption measurements show that the irradiation-introduced native defects are inside the bandgap, where they are incorporated as acceptors. The observed irradiation-produced changes in the optical absorption edge and the carrier populations in InxGa1-xN are in excellent agreement with the predictions of the amphoteric defect model.

cond-mat.mtrl-sci↗
arXiv2004

Fabrication of GaNxAs1-x Quantum Structures by Focused Ion Beam Patterning

A novel approach to the fabrication of GaNxAs1-x quantum dots and wires via ion beam patterning is presented. Photomodulated reflectance spectra confirm that N can be released from the As sublattice of an MBE-grown GaNxAs1-x film by amorphization through ion implantation followed by regrowth upon rapid thermal annealing (RTA). Amorphization may be achieved with a focused ion beam (FIB), which is used to implant Ga ions in patterned lines such that annealing produces GaAs regions within a GaNxAs1-x film. The profiles of these amorphized lines are dependent upon the dose implanted, and the film reaches a damage threshold during RTA due to excess Ga. By altering the FIB implantation pattern, quantum dots or wires may be fabricated.

cond-mat.mtrl-sci↗
arXiv2004

Carrier Concentration Dependencies of Magnetization & Transport in Ga1-xMnxAs1-yTey

We have investigated the transport and magnetization characteristics of Ga1-xMnxAs intentionally compensated with shallow Te donors. Using ion implantation followed by pulsed-laser melting, we vary the Te compensation and drive the system through a metal-insulator transition (MIT). This MIT is associated with enhanced low-temperature magnetization and an evolution from concave to convex temperature-dependent magnetization.

cond-mat.mtrl-sci↗
arXiv2004

High-Temperature Hall Effect in Ga(1-x)Mn(x)As

The temperature dependence of the Hall coefficient of a series of ferromagnetic Ga(1-x)Mn(x)As samples is measured in the temperature range 80K < T < 500K. We model the Hall coefficient assuming a magnetic susceptibility given by the Curie-Weiss law, a spontaneous Hall coefficient proportional to rho_xx^2(T), and including a constant diamagnetic contribution in the susceptibility. For all low resistivity samples this model provides excellent fits to the measured data up to T=380K and allows extraction of the hole concentration (p). The calculated p are compared to alternative methods of determining hole densities in these materials: pulsed high magnetic field (up to 55 Tesla) technique at low temperatures (less than the Curie temperature), and electrochemical capacitance- voltage profiling. We find that the Anomalous Hall Effect (AHE) contribution to rho_xy is substantial even well above the Curie temperature. Measurements of the Hall effect in this temperature regime can be used as a testing ground for theoretical descriptions of transport in these materials. We find that our data are consistent with recently published theories of the AHE, but they are inconsistent with theoretical models previously used to describe the AHE in conventional magnetic materials.

cond-mat.mtrl-sci↗
arXiv2003

Diluted II-VI Oxide Semiconductors with Multiple Band Gaps

We report the realization of a new multi-band-gap semiconductor. The highly mismatched alloy Zn1-yMnyOxTe1-x has been synthesized using the combination of oxygen ion implantation and pulsed laser melting. Incorporation of small quantities of isovalent oxygen leads to the formation of a narrow, oxygen-derived band of extended states located within the band gap of the Zn1-yMnyTe host. When only 1.3% of Te atoms is replaced with oxygen in a Zn0.88Mn0.12Te crystal (with band gap of 2.32 eV) the resulting band structure consists of two direct band gaps with interband transitions at ~1.77 eV and 2.7 eV. This remarkable modification of the band structure is well described by the band anticrossing model in which the interactions between the oxygen-derived band and the conduction band are considered. With multiple band gaps that fall within the solar energy spectrum, Zn1-yMnyOxTe1-x is a material perfectly satisfying the conditions for single-junction photovoltaics with the potential for power conversion efficiencies surpassing 50%.

cond-mat.mtrl-sci↗
arXiv2003

Growth and properties of ferromagnetic In(1-x)Mn(x)Sb alloys

We discuss a new narrow-gap ferromagnetic (FM) semiconductor alloy, In(1-x)Mn(x)Sb, and its growth by low-temperature molecular-beam epitaxy. The magnetic properties were investigated by direct magnetization measurements, electrical transport, magnetic circular dichroism, and the magneto-optical Kerr effect. These data clearly indicate that In(1-x)Mn(x)Sb possesses all the attributes of a system with carrier-mediated FM interactions, including well-defined hysteresis loops, a cusp in the temperature dependence of the resistivity, strong negative magnetoresistance, and a large anomalous Hall effect. The Curie temperatures in samples investigated thus far range up to 8.5 K, which are consistent with a mean-field-theory simulation of the carrier-induced ferromagnetism based on the 8-band effective band-orbital method.

cond-mat.mtrl-sci↗
arXiv2003

Enhancement of Curie temperature in Ga(1-x)Mn(x)As/Ga(1-y)Al(y)As ferromagnetic heterostructures by Be modulation doping

The effect of modulation doping by Be on the ferromagnetic properties of Ga(1-x)Mn(x)As is investigated in Ga(1-x)Mn(x)As/Ga(1-y)Al(y)As heterojunctions and quantum wells. Introducing Be acceptors into the Ga(1-y)Al(y)As barriers leads to an increase of the Curie temperature T_C of Ga(1-x)Mn(x)As, from 70 K in undoped structures to over 100 K with the modulation doping. This increase is qualitatively consistent with a multi-band mean field theory simulation of carrier-mediated ferromagnetism. An important feature is that the increase of T_C occurs only in those structures where the modulation doping is introduced after the deposition of the magnetic layer, but not when the Be-doped layer is grown first. This behavior is expected from the strong sensitivity of Mn interstitial formation to the value of the Fermi energy during growth.

cond-mat.mtrl-sci↗
arXiv2003

Structural and Electronic Properties of Amorphous and Polycrystalline In2Se3 Films

Structural and electronic properties of amorphous and single-phase polycrystalline films of gamma- and kappa-In2Se3 have been measured. The stable gamma phase nucleates homogeneously in the film bulk and has a high resistivity, while the metastable kappa phase nucleates at the film surface and has a moderate resistivity. The microstructures of hot-deposited and post-annealed cold-deposited gamma films are quite different but the electronic properties are similar. The increase in the resistivity of amorphous In2Se3 films upon annealing is interpreted in terms of the replacement of In-In bonds with In-Se bonds during crystallization. Great care must be taken in the preparation of In2Se3 films for electrical measurements as the presence of excess chalcogen or surface oxidation may greatly affect the film properties.

cond-mat.mtrl-sci↗
arXiv2003

Fundamental Curie temperature limit in ferromagnetic GaMnAs

We provide experimental evidence that the upper limit of ~110 K commonly observed for the Curie temperature T_C of Ga(1-x)Mn(x)As is caused by the Fermi-level-induced hole saturation. Ion channeling, electrical and magnetization measurements on a series of Ga(1-x-y)Mn(x)Be(y)As layers show a dramatic increase of the concentration of Mn interstitials accompanied by a reduction of T_C with increasing Be concentration, while the free hole concentration remains relatively constant at ~5x10^20 cm^-3. These results indicate that the concentrations of free holes and ferromagnetically active Mn spins are governed by the position of the Fermi level, which controls the formation energy of compensating interstitial Mn donors.

cond-mat.mtrl-sci↗
arXiv2003

In(1-x)Mn(x)Sb - a new narrow gap ferromagnetic semiconductor

A narrow-gap ferromagnetic In(1-x)Mn(x)Sb semiconductor alloy was successfully grown by low-temperature molecular beam epitaxy on CdTe/GaAs hybrid substrates. Ferromagnetic order in In(1-x)Mn(x)Sb was unambiguously established by the observation of clear hysteresis loops both in direct magnetization measurements and in the anomalous Hall effect, with Curie temperatures T_C ranging up to 8.5 K. The observed values of T_C agree well with the existing models of carrier-induced ferromagnetism.

cond-mat.mtrl-sci↗