Searcharxiv⌕ Search

arXiv subjects

Wei Sun

Publications and source records attributed to Wei Sun.

At least 199 records · Page 11Linked to original sources
arXiv2024

Thermal X-ray Emission in the Western Half of the LMC Superbubble 30 Dor C

While 30 Dor C is a unique superbubble in the Large Magellanic Cloud for its luminous non-thermal X-ray emission, the thermal X-ray emission it emanates has not yet been thoroughly investigated and well constrained. Based on the separate ~1 Ms deep XMM-Newton and Chandra observations, we report the discovery of the thermally-emitting plasma in some portions of the western half of 30 Dor C. The thermal emission can be reproduced by a collisional-ionization-equilibrium plasma model with an average electron temperature of ~0.4 keV. We find a significant overabundance of the intermediate-mass elements such as O, Ne, Mg, and Si, which may be indicative of a recent supernova explosion in 30 Dor C. Dynamical properties in combination with the information of the OB association LH 90 suggest that the internal post-main-sequence stars dominate the power of the superbubble and blow it out in the past ~1 Myr.

astro-ph.HE↗
arXiv2024

Unlocking the Potential of Early Epochs: Uncertainty-aware CT Metal Artifact Reduction

In computed tomography (CT), the presence of metallic implants in patients often leads to disruptive artifacts in the reconstructed images, hindering accurate diagnosis. Recently, a large amount of supervised deep learning-based approaches have been proposed for metal artifact reduction (MAR). However, these methods neglect the influence of initial training weights. In this paper, we have discovered that the uncertainty image computed from the restoration result of initial training weights can effectively highlight high-frequency regions, including metal artifacts. This observation can be leveraged to assist the MAR network in removing metal artifacts. Therefore, we propose an uncertainty constraint (UC) loss that utilizes the uncertainty image as an adaptive weight to guide the MAR network to focus on the metal artifact region, leading to improved restoration. The proposed UC loss is designed to be a plug-and-play method, compatible with any MAR framework, and easily adoptable. To validate the effectiveness of the UC loss, we conduct extensive experiments on the public available Deeplesion and CLINIC-metal dataset. Experimental results demonstrate that the UC loss further optimizes the network training process and significantly improves the removal of metal artifacts.

eess.IV↗
arXiv2024

An alkali-referenced vector spectrum analyzer for visible-light integrated photonics

Integrated photonics has reformed our information society by offering on-chip optical signal synthesis, processing and detection with reduced size, weight and power consumption. As such, it has been successfully established in the near-infrared (NIR) telecommunication bands. With the soaring demand in miniaturized systems for biosensing, quantum information and transportable atomic clocks, extensive endeavors have been stacked on translating integrated photonics into the visible spectrum, i.e. visible-light integrated photonics. Various innovative visible-light integrated devices have been demonstrated, such as lasers, frequency combs, and atom traps, highlighting the capacity and prospect to create chip-based optical atomic clocks that can make timing and frequency metrology ubiquitous. A pillar to the development of visible-light integrated photonics is characterization techniques featuring high frequency resolution and wide spectral coverage, which however remain elusive. Here, we demonstrate a vector spectrum analyzer (VSA) for visible-light integrated photonics, offering spectral bandwidth from 766 to 795 nm and frequency resolution of 415 kHz. The VSA is rooted on a widely chirping, high-power, narrow-linewidth, mode-hop-free laser around 780 nm, which is frequency-doubled from the near-infrared via an efficient, broadband CPLN waveguide. The VSA is further referenced to hyperfine structures of rubidium and potassium atoms, enabling 8.1 MHz frequency accuracy. We apply our VSA to showcase the characterization of loss, dispersion and phase response of passive integrated devices, as well as densely spaced spectra of mode-locked lasers. Combining operation in the NIR and visible spectra, our VSA allows characterization bandwidth exceeding an octave and can be an invaluable diagnostic tool for spectroscopy, nonlinear optical processing, imaging and quantum interfaces to atomic devices.

physics.optics↗
arXiv2024

Alleviating Exposure Bias in Diffusion Models through Sampling with Shifted Time Steps

Diffusion Probabilistic Models (DPM) have shown remarkable efficacy in the synthesis of high-quality images. However, their inference process characteristically requires numerous, potentially hundreds, of iterative steps, which could exaggerate the problem of exposure bias due to the training and inference discrepancy. Previous work has attempted to mitigate this issue by perturbing inputs during training, which consequently mandates the retraining of the DPM. In this work, we conduct a systematic study of exposure bias in DPM and, intriguingly, we find that the exposure bias could be alleviated with a novel sampling method that we propose, without retraining the model. We empirically and theoretically show that, during inference, for each backward time step $t$ and corresponding state $\hat{x}_t$, there might exist another time step $t_s$ which exhibits superior coupling with $\hat{x}_t$. Based on this finding, we introduce a sampling method named Time-Shift Sampler. Our framework can be seamlessly integrated to existing sampling algorithms, such as DDPM, DDIM and other high-order solvers, inducing merely minimal additional computations. Experimental results show our method brings significant and consistent improvements in FID scores on different datasets and sampling methods. For example, integrating Time-Shift Sampler to F-PNDM yields a FID=3.88, achieving 44.49\% improvements as compared to F-PNDM, on CIFAR-10 with 10 sampling steps, which is more performant than the vanilla DDIM with 100 sampling steps. Our code is available at https://github.com/Mingxiao-Li/TS-DPM.

cs.CV↗
arXiv2024

Perceiver-Prompt: Flexible Speaker Adaptation in Whisper for Chinese Disordered Speech Recognition

Disordered speech recognition profound implications for improving the quality of life for individuals afflicted with, for example, dysarthria. Dysarthric speech recognition encounters challenges including limited data, substantial dissimilarities between dysarthric and non-dysarthric speakers, and significant speaker variations stemming from the disorder. This paper introduces Perceiver-Prompt, a method for speaker adaptation that utilizes P-Tuning on the Whisper large-scale model. We first fine-tune Whisper using LoRA and then integrate a trainable Perceiver to generate fixed-length speaker prompts from variable-length inputs, to improve model recognition of Chinese dysarthric speech. Experimental results from our Chinese dysarthric speech dataset demonstrate consistent improvements in recognition performance with Perceiver-Prompt. Relative reduction up to 13.04% in CER is obtained over the fine-tuned Whisper.

eess.AS↗
arXiv2024

Recy-ctronics: Designing Fully Recyclable Electronics With Varied Form Factors

For today's electronics manufacturing process, the emphasis on stable functionality, durability, and fixed physical forms is designed to ensure long-term usability. However, this focus on robustness and permanence complicates the disassembly and recycling processes, leading to significant environmental repercussions. In this paper, we present three approaches that leverage easily recyclable materials-specifically, polyvinyl alcohol (PVA) and liquid metal (LM)-alongside accessible manufacturing techniques to produce electronic components and systems with versatile form factors. Our work centers on the development of recyclable electronics through three methods: 1) creating sheet electronics by screen printing LM traces on PVA substrates; 2) developing foam-based electronics by immersing mechanically stirred PVA foam into an LM solution; and 3) fabricating recyclable electronic tubes by injecting LM into mold cast PVA tubes, which can then be woven into various structures. To further assess the sustainability of our proposed methods, we conducted a life cycle assessment (LCA) to evaluate the environmental impact of our recyclable electronics in comparison to their conventional counterparts.

cs.HC↗
arXiv2024

Quantum Computing in Intelligent Transportation Systems: A Survey

Quantum computing, a field utilizing the principles of quantum mechanics, promises great advancements across various industries. This survey paper is focused on the burgeoning intersection of quantum computing and intelligent transportation systems, exploring its potential to transform areas such as traffic optimization, logistics, routing, and autonomous vehicles. By examining current research efforts, challenges, and future directions, this survey aims to provide a comprehensive overview of how quantum computing could affect the future of transportation.

quant-ph↗
arXiv2024

Uncertainty-guided Optimal Transport in Depth Supervised Sparse-View 3D Gaussian

3D Gaussian splatting has demonstrated impressive performance in real-time novel view synthesis. However, achieving successful reconstruction from RGB images generally requires multiple input views captured under static conditions. To address the challenge of sparse input views, previous approaches have incorporated depth supervision into the training of 3D Gaussians to mitigate overfitting, using dense predictions from pretrained depth networks as pseudo-ground truth. Nevertheless, depth predictions from monocular depth estimation models inherently exhibit significant uncertainty in specific areas. Relying solely on pixel-wise L2 loss may inadvertently incorporate detrimental noise from these uncertain areas. In this work, we introduce a novel method to supervise the depth distribution of 3D Gaussians, utilizing depth priors with integrated uncertainty estimates. To address these localized errors in depth predictions, we integrate a patch-wise optimal transport strategy to complement traditional L2 loss in depth supervision. Extensive experiments conducted on the LLFF, DTU, and Blender datasets demonstrate that our approach, UGOT, achieves superior novel view synthesis and consistently outperforms state-of-the-art methods.

cs.CV↗
arXiv2024

WiDRa -- Enabling Millimeter-Level Differential Ranging Accuracy in Wi-Fi Using Carrier Phase

Although Wi-Fi is an ideal technology for many ranging applications, the performance of current methods is limited by the system bandwidth, leading to low accuracy of $\sim 1$ m. For many applications, measuring differential range, viz., the change in the range between adjacent measurements, is sufficient. Correspondingly, this work proposes WiDRa - a Wi-Fi based Differential Ranging solution that provides differential range estimates by using the sum-carrier-phase information. The proposed method is not limited by system bandwidth and can track range changes even smaller than the carrier wavelength. The proposed method is first theoretically justified, while taking into consideration the various hardware impairments affecting Wi-Fi chips. In the process, methods to isolate the sum-carrier phase from the hardware impairments are proposed. Extensive simulation results show that WiDRa can achieve a differential range estimation root-mean-square-error (RMSE) of $\approx 1$ mm in channels with a Rician-factor $\geq 7$ (a $100 \times$ improvement to existing methods). The proposed methods are also validated on off-the-shelf Wi-Fi hardware to demonstrate feasibility, where they achieve an RMSE of $< 1$ mm in the differential range. Finally, limitations of current investigation and future directions of exploration are suggested, to further tap into the potential of WiDRa.

cs.IT↗
arXiv2024

Dual-Branch Network for Portrait Image Quality Assessment

Portrait images typically consist of a salient person against diverse backgrounds. With the development of mobile devices and image processing techniques, users can conveniently capture portrait images anytime and anywhere. However, the quality of these portraits may suffer from the degradation caused by unfavorable environmental conditions, subpar photography techniques, and inferior capturing devices. In this paper, we introduce a dual-branch network for portrait image quality assessment (PIQA), which can effectively address how the salient person and the background of a portrait image influence its visual quality. Specifically, we utilize two backbone networks (\textit{i.e.,} Swin Transformer-B) to extract the quality-aware features from the entire portrait image and the facial image cropped from it. To enhance the quality-aware feature representation of the backbones, we pre-train them on the large-scale video quality assessment dataset LSVQ and the large-scale facial image quality assessment dataset GFIQA. Additionally, we leverage LIQE, an image scene classification and quality assessment model, to capture the quality-aware and scene-specific features as the auxiliary features. Finally, we concatenate these features and regress them into quality scores via a multi-perception layer (MLP). We employ the fidelity loss to train the model via a learning-to-rank manner to mitigate inconsistencies in quality scores in the portrait image quality assessment dataset PIQ. Experimental results demonstrate that the proposed model achieves superior performance in the PIQ dataset, validating its effectiveness. The code is available at \url{https://github.com/sunwei925/DN-PIQA.git}.

cs.CV↗
arXiv2024

A Unified Review of Deep Learning for Automated Medical Coding

Automated medical coding, an essential task for healthcare operation and delivery, makes unstructured data manageable by predicting medical codes from clinical documents. Recent advances in deep learning and natural language processing have been widely applied to this task. However, deep learning-based medical coding lacks a unified view of the design of neural network architectures. This review proposes a unified framework to provide a general understanding of the building blocks of medical coding models and summarizes recent advanced models under the proposed framework. Our unified framework decomposes medical coding into four main components, i.e., encoder modules for text feature extraction, mechanisms for building deep encoder architectures, decoder modules for transforming hidden representations into medical codes, and the usage of auxiliary information. Finally, we introduce the benchmarks and real-world usage and discuss key research challenges and future directions.

cs.CL↗
arXiv2024

NTIRE 2024 Quality Assessment of AI-Generated Content Challenge

This paper reports on the NTIRE 2024 Quality Assessment of AI-Generated Content Challenge, which will be held in conjunction with the New Trends in Image Restoration and Enhancement Workshop (NTIRE) at CVPR 2024. This challenge is to address a major challenge in the field of image and video processing, namely, Image Quality Assessment (IQA) and Video Quality Assessment (VQA) for AI-Generated Content (AIGC). The challenge is divided into the image track and the video track. The image track uses the AIGIQA-20K, which contains 20,000 AI-Generated Images (AIGIs) generated by 15 popular generative models. The image track has a total of 318 registered participants. A total of 1,646 submissions are received in the development phase, and 221 submissions are received in the test phase. Finally, 16 participating teams submitted their models and fact sheets. The video track uses the T2VQA-DB, which contains 10,000 AI-Generated Videos (AIGVs) generated by 9 popular Text-to-Video (T2V) models. A total of 196 participants have registered in the video track. A total of 991 submissions are received in the development phase, and 185 submissions are received in the test phase. Finally, 12 participating teams submitted their models and fact sheets. Some methods have achieved better results than baseline methods, and the winning methods in both tracks have demonstrated superior prediction performance on AIGC.

cs.CV↗
arXiv2024

DMON: A Simple yet Effective Approach for Argument Structure Learning

Argument structure learning~(ASL) entails predicting relations between arguments. Because it can structure a document to facilitate its understanding, it has been widely applied in many fields~(medical, commercial, and scientific domains). Despite its broad utilization, ASL remains a challenging task because it involves examining the complex relationships between the sentences in a potentially unstructured discourse. To resolve this problem, we have developed a simple yet effective approach called Dual-tower Multi-scale cOnvolution neural Network~(DMON) for the ASL task. Specifically, we organize arguments into a relationship matrix that together with the argument embeddings forms a relationship tensor and design a mechanism to capture relations with contextual arguments. Experimental results on three different-domain argument mining datasets demonstrate that our framework outperforms state-of-the-art models. The code is available at https://github.com/VRCMF/DMON.git .

cs.CL↗
arXiv2024

Heterogeneity-aware integrative regression for ancestry-specific association studies

Ancestry-specific proteome-wide association studies (PWAS) based on genetically predicted protein expression can reveal complex disease etiology specific to certain ancestral groups. These studies require ancestry-specific models for protein expression as a function of SNP genotypes. In order to improve protein expression prediction in ancestral populations historically underrepresented in genomic studies, we propose a new penalized maximum likelihood estimator for fitting ancestry-specific joint protein quantitative trait loci models. Our estimator borrows information across ancestral groups, while simultaneously allowing for heterogeneous error variances and regression coefficients. We propose an alternative parameterization of our model which makes the objective function convex and the penalty scale invariant. To improve computational efficiency, we propose an approximate version of our method and study its theoretical properties. Our method provides a substantial improvement in protein expression prediction accuracy in individuals of African ancestry, and in a downstream PWAS analysis, leads to the discovery of multiple associations between protein expression and blood lipid traits in the African ancestry population.

stat.AP↗
arXiv2024

AIS 2024 Challenge on Video Quality Assessment of User-Generated Content: Methods and Results

This paper reviews the AIS 2024 Video Quality Assessment (VQA) Challenge, focused on User-Generated Content (UGC). The aim of this challenge is to gather deep learning-based methods capable of estimating the perceptual quality of UGC videos. The user-generated videos from the YouTube UGC Dataset include diverse content (sports, games, lyrics, anime, etc.), quality and resolutions. The proposed methods must process 30 FHD frames under 1 second. In the challenge, a total of 102 participants registered, and 15 submitted code and models. The performance of the top-5 submissions is reviewed and provided here as a survey of diverse deep models for efficient video quality assessment of user-generated content.

cs.CV↗
arXiv2024

NTIRE 2024 Challenge on Short-form UGC Video Quality Assessment: Methods and Results

This paper reviews the NTIRE 2024 Challenge on Shortform UGC Video Quality Assessment (S-UGC VQA), where various excellent solutions are submitted and evaluated on the collected dataset KVQ from popular short-form video platform, i.e., Kuaishou/Kwai Platform. The KVQ database is divided into three parts, including 2926 videos for training, 420 videos for validation, and 854 videos for testing. The purpose is to build new benchmarks and advance the development of S-UGC VQA. The competition had 200 participants and 13 teams submitted valid solutions for the final testing phase. The proposed solutions achieved state-of-the-art performances for S-UGC VQA. The project can be found at https://github.com/lixinustc/KVQChallenge-CVPR-NTIRE2024.

eess.IV↗
arXiv2024

THQA: A Perceptual Quality Assessment Database for Talking Heads

In the realm of media technology, digital humans have gained prominence due to rapid advancements in computer technology. However, the manual modeling and control required for the majority of digital humans pose significant obstacles to efficient development. The speech-driven methods offer a novel avenue for manipulating the mouth shape and expressions of digital humans. Despite the proliferation of driving methods, the quality of many generated talking head (TH) videos remains a concern, impacting user visual experiences. To tackle this issue, this paper introduces the Talking Head Quality Assessment (THQA) database, featuring 800 TH videos generated through 8 diverse speech-driven methods. Extensive experiments affirm the THQA database's richness in character and speech features. Subsequent subjective quality assessment experiments analyze correlations between scoring results and speech-driven methods, ages, and genders. In addition, experimental results show that mainstream image and video quality assessment methods have limitations for the THQA database, underscoring the imperative for further research to enhance TH video quality assessment. The THQA database is publicly accessible at https://github.com/zyj-2000/THQA.

cs.CV↗