arXiv subjects

Wen Chen

Publications and source records attributed to Wen Chen.

At least 217 records · Page 12Linked to original sources

arXiv2024

Throughput Maximization for Movable Antenna Systems with Movement Delay Consideration

In this paper, we model the minimum achievable throughput within a transmission block of restricted duration and aim to maximize it in movable antenna (MA)-enabled multiuser downlink communications. Particularly, we account for the antenna moving delay caused by mechanical movement, which has not been fully considered in previous studies, and reveal the trade-off between the delay and signal-to-interference-plus-noise ratio at users. To this end, we first consider a single-user setup to analyze the necessity of antenna movement. By quantizing the virtual angles of arrival, we derive the requisite region size for antenna moving, design the initial MA position, and elucidate the relationship between quantization resolution and moving region size. Furthermore, an efficient algorithm is developed to optimize MA position via successive convex approximation, which is subsequently extended to the general multiuser setup. Numerical results demonstrate that the proposed algorithms outperform fixed-position antenna schemes and existing ones without consideration of movement delay. Additionally, our algorithms exhibit excellent adaptability and stability across various transmission block durations and moving region sizes, and are robust to different antenna moving speeds. This allows the hardware cost of MA-aided systems to be reduced by employing low rotational speed motors.

cs.IT↗

arXiv2024

Dynamic Trajectory and Power Control in Ultra-Dense UAV Networks: A Mean-Field Reinforcement Learning Approach

In ultra-dense unmanned aerial vehicle (UAV) networks, it is challenging to coordinate the resource allocation and interference management among large-scale UAVs, for providing flexible and efficient service coverage to the ground users (GUs). In this paper, we propose a learning-based resource allocation scheme in an ultra-dense UAV communication network, where the GUs' service demands are time-varying with unknown distributions. We formulate the non-cooperative game among multiple co-channel UAVs as a stochastic game, where each UAV jointly optimizes its trajectory, user association, and downlink power control to maximize the expectation of its locally cumulative energy efficiency under the interference and energy constraints. To cope with the scalability issue in a large-scale network, we further formulate the problem as a mean-field game (MFG), which simplifies the interactions among the UAVs into a two-player game between a representative UAV and a mean-field. We prove the existence and uniqueness of the equilibrium for the MFG, and propose a model-free mean-field reinforcement learning algorithm named maximum entropy mean-field deep Q network (ME-MFDQN) to solve the mean-field equilibrium in both fully and partially observable scenarios. The simulation results reveal that the proposed algorithm improves the energy efficiency compared with the benchmark algorithms. Moreover, the performance can be further enhanced if the GUs' service demands exhibit higher temporal correlation or if the UAVs have wider observation capabilities over their nearby GUs.

eess.SY↗

arXiv2024

Beamforming Design and Multi-User Scheduling in Transmissive RIS Enabled Distributed Cooperative ISAC Networks with RSMA

In this paper, we propose a novel transmissive reconfigurable intelligent surface (TRIS) transceiver-empowered distributed cooperative integrated sensing and communication (ISAC) network to enhance coverage as well as to enhance wireless environment understanding. Based on the network requirements, the users are categorized into cooperative users (CUEs) and destination users (DUEs), and the CUEs utilize their own resources to serve the DUEs. To realize cooperation, we implement rate-splitting multiple access (RSMA) at the base station (BS), where the common stream is decoded and reencoded at the CUEs and forwarded to the DUEs, while the private stream satisfies the CUEs' own communication requirements. We construct an optimization problem with maximum minimum radar mutual information (RMI) as the objective function to optimize the BS beamforming matrix, the CUE beamforming matrices, the common stream rate vectors, and the user scheduling vectors. Due to the coupling of the optimization variables and non-convex operation, the proposed problem is a non-convex optimization problem that cannot be solved directly. To address the above challenges, we adopt a consensus alternating direction method of multipliers (ADMM) framework to decouple the optimization variables and solve it. Specifically, the problem is decoupled into multiple subproblems and solved by iterative optimization independently until overall convergence is achieved. Finally, numerical results validate the superiority of the proposed scheme in terms of improving communication sum-rate and RMI, and greatly reduce the algorithm complexity.

cs.IT↗

arXiv2024

IREE Oriented Active RIS-Assisted Green communication System with Outdated CSI

The rapid evolution of communication technologies has spurred a growing demand for energy-efficient network architectures and performance metrics. Active Reconfigurable Intelligent Surfaces (RIS) are emerging as a key component in green network architectures. Compared to passive RIS, active RIS are equipped with amplifiers on each reflecting element, allowing them to simultaneously reflect and amplify signals, thereby overcoming the double multiplicative fading in the phase response, and improving both system coverage and performance. Additionally, the Integrated Relative Energy Efficiency (IREE) metric, as introduced in [1], addresses the dynamic variations in traffic and capacity over time and space, enabling more energy-efficient wireless systems. Building on these advancements, this paper investigates the problem of maximizing IREE in active RIS-assisted green communication systems. However, acquiring perfect Channel State Information (CSI) in practical systems poses significant challenges and costs. To address this, we derive the average achievable rate based on outdated CSI and formulated the corresponding IREE maximization problem, which is solved by jointly optimizing beamforming at both the base station and RIS. Given the non-convex nature of the problem, we propose an Alternating Optimization Successive Approximation (AOSO) algorithm. By applying quadratic transform and relaxation techniques, we simplify the original problem and alternately optimize the beamforming matrices at the base station and RIS. Furthermore, to handle the discrete constraints of the RIS reflection coefficients, we develop a successive approximation method. Experimental results validate our theoretical analysis of the algorithm's convergence , demonstrating the effectiveness of the proposed algorithm and highlighting the superiority of IREE in enhancing the performance of green communication networks.

eess.SP↗

arXiv2024

Model Predictive Control Enabled UAV Trajectory Optimization and Secure Resource Allocation

In this paper, we investigate a secure communication architecture based on unmanned aerial vehicle (UAV), which enhances the security performance of the communication system through UAV trajectory optimization. We formulate a control problem of minimizing the UAV flight path and power consumption while maximizing secure communication rate over infinite horizon by jointly optimizing UAV trajectory, transmit beamforming vector, and artificial noise (AN) vector. Given the non-uniqueness of optimization objective and significant coupling of the optimization variables, the problem is a non-convex optimization problem which is difficult to solve directly. To address this complex issue, an alternating-iteration technique is employed to decouple the optimization variables. Specifically, the problem is divided into three subproblems, i.e., UAV trajectory, transmit beamforming vector, and AN vector, which are solved alternately. Additionally, considering the susceptibility of UAV trajectory to disturbances, the model predictive control (MPC) approach is applied to obtain UAV trajectory and enhance the system robustness. Numerical results demonstrate the superiority of the proposed optimization algorithm in maintaining accurate UAV trajectory and high secure communication rate compared with other benchmark schemes.

eess.SP↗

arXiv2024

Digital Twin-Assisted Federated Learning with Blockchain in Multi-tier Computing Systems

In Industry 4.0 systems, a considerable number of resource-constrained Industrial Internet of Things (IIoT) devices engage in frequent data interactions due to the necessity for model training, which gives rise to concerns pertaining to security and privacy. In order to address these challenges, this paper considers a digital twin (DT) and blockchain-assisted federated learning (FL) scheme. To facilitate the FL process, we initially employ fog devices with abundant computational capabilities to generate DT for resource-constrained edge devices, thereby aiding them in local training. Subsequently, we formulate an FL delay minimization problem for FL, which considers both of model transmission time and synchronization time, also incorporates cooperative jamming to ensure secure synchronization of DT. To address this non-convex optimization problem, we propose a decomposition algorithm. In particular, we introduce upper limits on the local device training delay and the effects of aggregation jamming as auxiliary variables, thereby transforming the problem into a convex optimization problem that can be decomposed for independent solution. Finally, a blockchain verification mechanism is employed to guarantee the integrity of the model uploading throughout the FL process and the identities of the participants. The final global model is obtained from the verified local and global models within the blockchain through the application of deep learning techniques. The efficacy of our proposed cooperative interference-based FL process has been verified through numerical analysis, which demonstrates that the integrated DT blockchain-assisted FL scheme significantly outperforms the benchmark schemes in terms of execution time, block optimization, and accuracy.

cs.CR↗

arXiv2024

Adversarial Federated Consensus Learning for Surface Defect Classification Under Data Heterogeneity in IIoT

The challenge of data scarcity hinders the application of deep learning in industrial surface defect classification (SDC), as it's difficult to collect and centralize sufficient training data from various entities in Industrial Internet of Things (IIoT) due to privacy concerns. Federated learning (FL) provides a solution by enabling collaborative global model training across clients while maintaining privacy. However, performance may suffer due to data heterogeneity-discrepancies in data distributions among clients. In this paper, we propose a novel personalized FL (PFL) approach, named Adversarial Federated Consensus Learning (AFedCL), for the challenge of data heterogeneity across different clients in SDC. First, we develop a dynamic consensus construction strategy to mitigate the performance degradation caused by data heterogeneity. Through adversarial training, local models from different clients utilize the global model as a bridge to achieve distribution alignment, alleviating the problem of global knowledge forgetting. Complementing this strategy, we propose a consensus-aware aggregation mechanism. It assigns aggregation weights to different clients based on their efficacy in global knowledge learning, thereby enhancing the global model's generalization capabilities. Finally, we design an adaptive feature fusion module to further enhance global knowledge utilization efficiency. Personalized fusion weights are gradually adjusted for each client to optimally balance global and local features. Compared with state-of-the-art FL methods like FedALA, the proposed AFedCL method achieves an accuracy increase of up to 5.67% on three SDC datasets.

cs.LG↗

arXiv2024

Discrete RIS Enhanced Space Shift Keying MIMO System via Reflecting Beamforming Optimization

In this paper, a discrete reconfigurable intelligent surface (RIS)-assisted spatial shift keying (SSK) multiple-input multiple-output (MIMO) scheme is investigated, in which a direct link between the transmitter and the receiver is considered. To improve the reliability of the RIS-SSK-MIMO scheme, we formulate an objective function based on minimizing the average bit error probability (ABEP). Since the reflecting phase shift of RIS is discrete, it is difficult to address this problem directly. To this end, we optimize the RIS phase shift to maximize the Euclidean distance between the minimum constellations by applying the successive convex approximation (SCA) and penaltyalternating optimization method. Simulation results verify the superiority of the proposed RIS-SSK-MIMO scheme and demonstrate the impact of the number of RIS elements, the number of phase quantization bits, and the number of receive and transmit antennas in terms of reliability.

cs.IT↗

arXiv2024

V2X-Assisted Distributed Computing and Control Framework for Connected and Automated Vehicles under Ramp Merging Scenario

This paper investigates distributed computing and cooperative control of connected and automated vehicles (CAVs) in ramp merging scenario under transportation cyber-physical system. Firstly, a centralized cooperative trajectory planning problem is formulated subject to the safely constraints and traffic performance in ramp merging scenario, where the trajectories of all vehicles are jointly optimized. To get rid of the reliance on a central controller and reduce computation time, a distributed solution to this problem implemented among CAVs through Vehicles-to-Everything (V2X) communication is proposed. Unlike existing method, our method can distribute the computational task among CAVs and carry out parallel solving through V2X communication. Then, a multi-vehicles model predictive control (MPC) problem aimed at maximizing system stability and minimizing control input is formulated based on the solution of the first problem subject to strict safety constants and input limits. Due to these complex constraints, this problem becomes high-dimensional, centralized, and non-convex. To solve it in a short time, a decomposition and convex reformulation method, namely distributed cooperative iterative model predictive control (DCIMPC), is proposed. This method leverages the communication capability of CAVs to decompose the problem, making full use of the computational resources on vehicles to achieve fast solutions and distributed control. The two above problems with their corresponding solving methods form the systemic framework of the V2X assisted distributed computing and control. Simulations have been conducted to evaluate the framework's convergence, safety, and solving speed. Additionally, extra experiments are conducted to validate the performance of DCIMPC. The results show that our method can greatly improve computation speed without sacrificing system performance.

eess.SY↗

arXiv2024

Graph-GIC: A Smart and Parallelized Geomagnetically Induced Current Modelling Algorithm Based on Graph Theory for Space Weather Applications

Geomagnetically Induced Current (GIC) refers to the electromagnetic response of the Earth and its conductive modern infrastructures to space weather and would pose a significant threat to high-voltage power grids designed for the alternative current operation. To assess the impact of space weather on the power grid, one needs to calculate the GIC on a national or continental scale. In this study, we developed a smart and parallelized GIC modelling algorithm, Graph GIC. This algorithm deploys a graph representing a power grid in a single-line diagram, in which substations/transformers act as nodes and transmission lines as edges. With these denotations, a power grid and its electric parameters are mathematically represented with an adjacency matrix and an admittance matrix. We used sparse matrix and parallelisation techniques to expedite the intensive computation in cases of large-scale power grids. The Graph GIC was validated with a benchmark grid, applied to the GIC calculation of the 500 kV power grid of Guangdong, China, and conducted preliminary analysis on the grid's susceptibility to geomagnetic storms. The Graph GIC algorithm has the advantage of an intuitive and highly scalable graph representation of a power grid at any scale. It achieves high-accuracy calculation and a speedup of about 18 times after parallelisation. This algorithm could be applied to assess the impact of space weather on a power grid up to continental scales and could be incorporated into global space weather modelling frameworks.

physics.space-ph↗

arXiv2024

Intelligent Reflecting Surface Aided MIMO Networks: Distributed or Centralized Architecture?

We investigate the capacity of a broadcast channel with a multi-antenna base station (BS) sending independent messages to multiple users, aided by IRSs with N elements. In particular, both the distributed and centralized IRS deployment architectures are considered. Regarding the distributed IRS, the N IRS elements form multiple IRSs and each of them is installed near a user cluster; while for the centralized IRS, all IRS elements are located in the vicinity of the BS. To draw essential insights, we first derive the maximum capacity achieved by the distributed IRS and centralized IRS, respectively, under the assumption of line-of-sight propagation and homogeneous channel setups. By capturing the fundamental tradeoff between the spatial multiplexing gain and passive beamforming gain, we rigourously prove that the capacity of the distributed IRS is higher than that of the centralized IRS provided that the total number of IRS elements is above a threshold. Motivated by the superiority of the distributed IRS, we then focus on the transmission and element allocation design under the distributed IRS. By exploiting the user channel correlation of intra-clusters and inter-clusters, an efficient hybrid multiple access scheme relying on both spatial and time domains is proposed to fully exploit both the passive beamforming gain and spatial DoF. Moreover, the IRS element allocation problem is investigated for the objectives of sum-rate maximization and minimum user rate maximization, respectively. Finally, extensive numerical results are provided to validate our theoretical finding and also to unveil the effectiveness of the distributed IRS for improving the system capacity under various system setups.

cs.IT↗

arXiv2024

Ground calibration and network of the first CATCH pathfinder

The Chasing All Transients Constellation Hunters (CATCH) space mission is focused on exploring the dynamic universe via X-ray follow-up observations of various transients. The first pathfinder of the CATCH mission, CATCH-1, was launched on June 22, 2024, alongside the Space-based multiband astronomical Variable Objects Monitor (SVOM) mission. CATCH-1 is equipped with narrow-field optimized Micro Pore Optics (MPOs) featuring a large effective area and incorporates four Silicon Drift Detectors (SDDs) in its focal plane. This paper presents the system calibration results conducted before the satellite integration. Utilizing the data on the performance of the mirror and detectors obtained through the system calibration, combined with simulated data, the ground calibration database can be established. Measuring the relative positions of the mirror and detector system, which were adjusted during system calibration, allows for accurate installation of the entire satellite. Furthermore, the paper outlines the operational workflow of the ground network post-satellite launch.

astro-ph.IM↗

arXiv2024

Decision Transformers for Wireless Communications: A New Paradigm of Resource Management

As the next generation of mobile systems evolves, artificial intelligence (AI) is expected to deeply integrate with wireless communications for resource management in variable environments. In particular, deep reinforcement learning (DRL) is an important tool for addressing stochastic optimization issues of resource allocation. However, DRL has to start each new training process from the beginning once the state and action spaces change, causing low sample efficiency and poor generalization ability. Moreover, each DRL training process may take a large number of epochs to converge, which is unacceptable for time-sensitive scenarios. In this paper, we adopt an alternative AI technology, namely, Decision Transformer (DT), and propose a DT-based adaptive decision architecture for wireless resource management. This architecture innovates through constructing pre-trained models in the cloud and then fine-tuning personalized models at the edges. By leveraging the power of DT models learned over offline datasets, the proposed architecture is expected to achieve rapid convergence with many fewer training epochs and higher performance in new scenarios with different state and action spaces, compared with DRL. We then design DT frameworks for two typical communication scenarios: intelligent reflecting surfaces-aided communications and unmanned aerial vehicle-aided mobile edge computing. Simulations demonstrate that the proposed DT frameworks achieve over $3$-$6$ times speedup in convergence and better performance relative to the classic DRL method, namely, proximal policy optimization.

eess.SP↗

arXiv2024

Spatial Multiplexing Oriented Channel Reconfiguration in Multi-IRS Aided MIMO Systems

Spatial multiplexing plays a significant role in improving the capacity of multiple-input multiple-output (MIMO) communication systems. To improve the spectral efficiency (SE) of a point-to-point MIMO system, we exploit the channel reconfiguration capabilities provided by multiple intelligent reflecting surfaces (IRSs) to enhance the spatial multiplexing. Unlike most existing works, we address both the issues of the IRSs placement and elements allocation. To this end, we first introduce an orthogonal placement strategy to mitigate channel correlation, thereby enabling interference-free multi-stream transmission. Subsequently, we propose a successive convex approximation (SCA)-based approach to jointly optimize the IRS elements and power allocation. Our theoretical analysis unveils that equal IRS elements/power allocation scheme becomes asymptotically optimal as the number of IRS elements and transmit power tend to be infinite. Numerical results demonstrate that when the total number of IRS elements or the power exceeds a certain threshold, a multi-IRS assisted system outperforms a single IRS configuration.

cs.IT↗

arXiv2024

Towards TMA-Based Transmissive RIS Transceiver Enabled Downlink Communication Networks: A Consensus-ADMM Approach

This paper presents a novel multi-stream downlink communication system that utilizes a transmissive reconfigurable intelligent surface (RIS) transceiver. Specifically, we elaborate the downlink communication scheme using time-modulated array (TMA) technology, which enables high order modulation and multi-stream beamforming. Then, an optimization problem is formulated to maximize the minimum signal-to-interference-plusnoise ratio (SINR) with user fairness, which takes into account the constraint of the maximum available power for each transmissive element. Due to the non-convex nature of the formulated problem,finding optimal solution is challenging. To mitigate the complexity,we propose a linear-complexity beamforming algorithm based on consensus alternating direction method of multipliers (ADMM).Specifically, by introducing a set of auxiliary variables, the problem can be decomposed into multiple sub-problems that are amenable to parallel computation, where the each sub-problem can yield closed-form expressions, bringing a significant reduction in the computational complexity. The overall problem achieves convergence by iteratively addressing these sub-problems in an alternating manner. Finally, the convergence of the proposed algorithm and the impact of various parameter configurations on the system performance are validated through numerical simulations.

eess.SP↗

arXiv2024

Joint Transmitter and Receiver Design for Movable Antenna Enhanced Multicast Communications

Movable antenna (MA) is an emerging technology that utilizes localized antenna movement to achieve better channel conditions for enhancing communication performance. In this paper, we study the MA-enhanced multicast transmission from a base station equipped with multiple MAs to multiple groups of single-MA users. Our goal is to maximize the minimum weighted signal-to-interference-plus-noise ratio (SINR) among all the users by jointly optimizing the position of each transmit/receive MA and the transmit beamforming. To tackle this challenging problem, we first consider the single-group scenario and propose an efficient algorithm based on the techniques of alternating optimization and successive convex approximation. Particularly, when optimizing transmit or receive MA positions, we construct a concave lower bound for the signal-to-noise ratio (SNR) of each user using only the second-order Taylor expansion, which simplifies the problem-solving process compared to the existing two-step approximation method. The proposed design is then extended to the general multi-group scenario. Simulation results show that the proposed algorithm converges faster than the existing two-step approximation method, achieving a 3.4% enhancement in max-min SNR. Moreover, it can improve the max-min SNR/SINR by up to 22.5%, 181.7%, and 343.9% compared to benchmarks employing only receive MAs, only transmit MAs, and both transmit and receive FPAs, respectively.

cs.IT↗

arXiv2024

On the Performance of RIS-Aided Spatial Modulation for Downlink Transmission

In this study, we explore the performance of a reconfigurable reflecting surface (RIS)-assisted transmit spatial modulation (SM) system for downlink transmission, wherein the deployment of RIS serves the purpose of blind area coverage within the channel. At the receiving end, we present three detectors, i.e., maximum likelihood (ML) detector, two-stage ML detection, and greedy detector to recover the transmitted signal. By utilizing the ML detector, we initially derive the conditional pair error probability expression for the proposed scheme. Subsequently, we leverage the central limit theorem (CLT) to obtain the probability density function of the combined channel. Following this, the Gaussian-Chebyshev quadrature method is applied to derive a closed-form expression for the unconditional pair error probability and establish the union tight upper bound for the average bit error probability (ABEP). Furthermore, we derive a closed-form expression for the ergodic capacity of the proposed RIS-SM scheme. Monte Carlo simulations are conducted not only to assess the complexity and reliability of the three detection algorithms but also to validate the results obtained through theoretical derivation results.

cs.IT↗

arXiv2024

Resource Efficient Asynchronous Federated Learning for Digital Twin Empowered IoT Network

As an emerging technology, digital twin (DT) can provide real-time status and dynamic topology mapping for Internet of Things (IoT) devices. However, DT and its implementation within industrial IoT networks necessitates substantial, distributed data support, which often leads to ``data silos'' and raises privacy concerns. To address these issues, we develop a dynamic resource scheduling algorithm tailored for the asynchronous federated learning (FL)-based lightweight DT empowered IoT network. Specifically, our approach aims to minimize a multi-objective function that encompasses both energy consumption and latency by optimizing IoT device selection and transmit power control, subject to FL model performance constraints. We utilize the Lyapunov method to decouple the formulated problem into a series of one-slot optimization problems and develop a two-stage optimization algorithm to achieve the optimal transmission power control and IoT device scheduling strategies. In the first stage, we derive closed-form solutions for optimal transmit power on the IoT device side. In the second stage, since partial state information is unknown, e.g., the transmitting power and computational frequency of IoT device, the edge server employs a multi-armed bandit (MAB) framework to model the IoT device selection problem and utilizes an efficient online algorithm, namely the client utility-based upper confidence bound (CU-UCB), to address it. Numerical results validate our algorithm's superiority over benchmark schemes, and simulations demonstrate that our algorithm achieves faster training speeds on the Fashion-MNIST and CIFAR-10 datasets within the same training duration.

cs.DC↗