arXiv subjects

Xiaojing Huang

Publications and source records attributed to Xiaojing Huang.

At least 19 recordsLinked to original sources

arXiv2026

Hybrid Beamforming in Non-Terrestrial Networks: Architectures, Design Challenges, and Opportunities

Hybrid analog-digital beamforming (HBF) has emerged as a key enabling technology for non-terrestrial networks (NTNs), where large antenna arrays are required to compensate for severe propagation loss but fully digital beamforming is often impractical due to radio-frequency (RF) chain cost, power consumption, and payload limitations. Compared with terrestrial networks, NTN platforms such as low Earth orbit (LEO) satellites and unmanned aerial vehicles (UAVs) impose distinctive HBF design challenges, including high mobility, Doppler effects, sparse line-of-sight-dominant channels, stringent on-board energy budgets, and, for UAVs, the additional coupling between beamforming and controllable platform placement or trajectory. This survey provides a systematic review of HBF techniques for NTN systems, with emphasis on LEO satellite and UAV communications. We first introduce common HBF architectures, signal models, channel representations, analog and digital precoder designs, and learning-aided approaches that form the shared technical foundation of existing works. We then survey both platforms under a common set of five categories, which cover system architecture and precoding design, time-varying beam management, network-level cooperation and scheduling, sensing capability and reconfigurable surfaces, and security and multiple access. Their platform-specific content differs most sharply in the second one, since the dominant time-varying mechanism is traffic-driven beam hopping on an LEO payload but mobility-aware beam tracking on a UAV. Finally, we discuss open research challenges and future directions toward scalable, robust, and hardware-efficient HBF in next-generation NTNs.

eess.SP↗

arXiv2026

Federated Low-Rank Koopman Learning for Multivariate Time-Series Anomaly Detection in IoT Systems

Distributed IoT systems generate multivariate time-series streams for monitoring physical assets, servers, and embedded sensing platforms. Detecting abnormal temporal behavior is critical for fault diagnosis, predictive maintenance, and security. However, practical IoT anomaly detection is hindered by decentralized and non-IID data, limited bandwidth, and the constrained computation and memory of edge devices. This paper proposes FedKAD, a resource-efficient federated Koopman anomaly detection framework for distributed IoT multivariate time series. Unlike deep-learning-based anomaly detectors that require training and communicating large neural models, FedKAD learns normal temporal dynamics through lightweight sliding-window Koopman representations. Federated training is formulated as a low-rank consensus problem, where raw sensor streams and local reduced dynamics remain on device while only compact subspace variables are exchanged with the server. To optimize the shared representation under orthonormality constraints, we develop a federated Stiefel-ADMM algorithm and provide convergence and stationarity analysis under partial client participation. During inference, each client detects anomalies locally by measuring the prediction residual between observed future trajectories and the learned Koopman dynamics. Experiments on four widely used multivariate time-series anomaly detection benchmarks show that FedKAD maintains or improves detection performance compared with federated deep-learning baselines. More importantly for IoT deployment, FedKAD provides up to $2.1\times10^3$ faster training, $80\times$ lower communication, and $79\times$ lower inference latency than neural baselines, confirming its suitability for resource-constrained edge devices.

cs.LG↗

arXiv2025

Learning neural representations for X-ray ptychography reconstruction with unknown probes

X-ray ptychography provides exceptional nanoscale resolution and is widely applied in materials science, biology, and nanotechnology. However, its full potential is constrained by the critical challenge of accurately reconstructing images when the illuminating probe is unknown. Conventional iterative methods and deep learning approaches are often suboptimal, particularly under the low-signal conditions inherent to low-dose and high-speed experiments. These limitations compromise reconstruction fidelity and restrict the broader adoption of the technique. In this work, we introduce the Ptychographic Implicit Neural Representation (PtyINR), a self-supervised framework that simultaneously addresses the object and probe recovery problem. By parameterizing both as continuous neural representations, PtyINR performs end-to-end reconstruction directly from raw diffraction patterns without requiring any pre-characterization of the probe. Extensive evaluations demonstrate that PtyINR achieves superior reconstruction quality on both simulated and experimental data, with remarkable robustness under challenging low-signal conditions. Furthermore, PtyINR offers a generalizable, physics-informed framework for addressing probe-dependent inverse problems, making it applicable to a wide range of computational microscopy problems.

cs.CV↗

arXiv2024

Wireless Communications in Doubly Selective Channels with Domain Adaptivity

Wireless communications are significantly impacted by the propagation environment, particularly in doubly selective channels with variations in both time and frequency domains. Orthogonal Time Frequency Space (OTFS) modulation has emerged as a promising solution; however, its high equalization complexity, if performed in the delay-Doppler domain, limits its universal application. This article explores domain-adaptive system design, with an emphasis on adaptive equalization, while also discussing modulation and pilot placement strategies. It investigates the dynamic selection of best-fit domains based on channel conditions to enhance performance across diverse environments. We examine channel domain connections, signal designs, and equalization techniques with domain adaptivity, and highlight future research opportunities.

eess.SP↗

arXiv2024

Sensing in Bi-Static ISAC Systems with Clock Asynchronism: A Signal Processing Perspective

Integrated Sensing and Communication (ISAC) has been identified as a pillar usage scenario for the impending 6G era. Bi-static sensing, a major type of sensing in ISAC, is promising to expedite ISAC in the near future, as it requires minimal changes to the existing network infrastructure. However, a critical challenge for bi-static sensing is clock asynchronism due to the use of different clocks at far-separated transmitters and receivers. This causes the received signal to be affected by time-varying random phase offsets, severely degrading, or even failing, direct sensing. Hence, to effectively enable ISAC, considerable research has been directed toward addressing the clock asynchronism issue in bi-static sensing. This paper provides an overview of the issue and existing techniques developed in an ISAC background. Based on the review and comparison, we also draw insights into the future research directions and open problems, aiming to nurture the maturation of bi-static sensing in ISAC.

eess.SP↗

arXiv2024

Dose-efficient Automatic Differentiation for Ptychographic Reconstruction

Ptychography, as a powerful lensless imaging method, has become a popular member of the coherent diffractive imaging family over decades of development. The ability to utilize low-dose X-rays and/or fast scans offers a big advantage in a ptychographic measurement (for example, when measuring radiation-sensitive samples), but results in low-photon statistics, making the subsequent phase retrieval challenging. Here, we demonstrate a dose-efficient automatic differentiation framework for ptychographic reconstruction (DAP) at low-photon statistics and low overlap ratio. As no reciprocal space constraint is required in this DAP framework, the framework, based on various forward models, shows superior performance under these conditions. It effectively suppresses potential artifacts in the reconstructed images, especially for the inherent periodic artifact in a raster scan. We validate the effectiveness and robustness of this method using both simulated and measured datasets.

physics.med-ph↗

arXiv2024

Coordinate-based Neural Network for Fourier Phase Retrieval

Fourier phase retrieval is essential for high-definition imaging of nanoscale structures across diverse fields, notably coherent diffraction imaging. This study presents the Single impliCit neurAl Network (SCAN), a tool built upon coordinate neural networks meticulously designed for enhanced phase retrieval performance. Remedying the drawbacks of conventional iterative methods which are easiliy trapped into local minimum solutions and sensitive to noise, SCAN adeptly connects object coordinates to their amplitude and phase within a unified network in an unsupervised manner. While many existing methods primarily use Fourier magnitude in their loss function, our approach incorporates both the predicted magnitude and phase, enhancing retrieval accuracy. Comprehensive tests validate SCAN's superiority over traditional and other deep learning models regarding accuracy and noise robustness. We also demonstrate that SCAN excels in the ptychography setting.

cs.CV↗

arXiv2023

Imaging extended single crystal lattice distortion fields with multi-peak Bragg ptychography

We describe a phase-retrieval-based imaging method to directly spatially resolve the vector lattice distortions in an extended crystalline sample by explicit coupling of independent Bragg ptychography data sets into the reconstruction process. Our method addresses this multi-peak Bragg ptychography (MPBP) inverse problem by explicit gradient descent optimization of an objective function based on modeling of the probe-lattice interaction, along with corrective steps to address spurious reconstruction artifacts. Robust convergence of the optimization process is ensured by computing exact gradients with the automatic differentiation capabilities of high-performance computing software packages. We demonstrate MPBP reconstruction with simulated ptychography data mimicking diffraction from a single crystal membrane containing heterogeneities that manifest as phase discontinuities in the diffracted wave. We show the superior ability of such an optimization-based approach in removing reconstruction artifacts compared to existing phase retrieval and lattice distortion reconstruction approaches.

cond-mat.mtrl-sci↗

arXiv2023

Sensing Aided Uplink Transmission in OTFS ISAC with Joint Parameter Association, Channel Estimation and Signal Detection

In this work, we study sensing-aided uplink transmission in an integrated sensing and communication (ISAC) vehicular network with the use of orthogonal time frequency space (OTFS) modulation. To exploit sensing parameters for improving uplink communications, the parameters must be first associated with the transmitters, which is a challenging task. We propose a scheme that jointly conducts parameter association, channel estimation and signal detection by formulating it as a constrained bilinear recovery problem. Then we develop a message passing algorithm to solve the problem, leveraging the bilinear unitary approximate message passing (Bi-UAMP) algorithm. Numerical results validate the proposed scheme, which show that relevant performance bounds can be closely approached.

eess.SP↗

arXiv2023

Simultaneous Beam and User Selection for the Beamspace mmWave/THz Massive MIMO Downlink

Beamspace millimeter-wave (mmWave) and terahertz (THz) massive MIMO constitute attractive schemes for next-generation communications, given their abundant bandwidth and high throughput. However, their user and beam selection problem has to be efficiently addressed. Inspired by this challenge, we develop low-complexity solutions explicitly. We introduce the dirty paper coding (DPC) into the joint user and beam selection problem. We unveil the compelling properties of the DPC sum rate in beamspace massive MIMO, showing its monotonic evolution against the number of users and beams selected. We then exploit its beneficial properties for substantially simplifying the joint user and beam selection problem. Furthermore, we develop a set of algorithms striking unique trade-offs for solving the simplified problem, facilitating simultaneous user and beam selection based on partial beamspace channels for the first time. Additionally, we derive the sum rate bound of the algorithms and analyze their complexity. Our simulation results validate the effectiveness of the proposed design and analysis, confirming their superiority over prior solutions.

eess.SP↗

arXiv2023

Green Joint Communications and Sensing Employing Analog Multi-Beam Antenna Arrays

Joint communications and sensing (JCAS) is potentially a hallmark technology for the sixth generation mobile network (6G). Most existing JCAS designs are based on digital arrays, analog arrays with tunable phase shifters, or hybrid arrays, which are effective but are generally complicated to design and power inefficient. This article introduces the energy-efficient and easy-to-design multi-beam antenna arrays (MBAAs) for JCAS. Using pre-designed and fixed analog devices, such as lens or Butler matrix, MBAA can simultaneously steer multiple beams yet with negligible power consumption compared with other techniques. Moreover, MBAAs enable flexible beam synthesis, accurate angle-of-arrival estimation, and easy handling/utilization of the beam squint effect. All these features have not been well captured by the JACS community yet. To promote the awareness of them, we intuitively illustrate them and also exploit them for constructing a multi-beam JCAS framework. Finally, the challenges and opportunities are discussed to foster the development of green JCAS systems.

eess.SP↗

arXiv2022

Joint Communications and Sensing Employing Optimized MIMO-OFDM Signals

Joint communication and sensing (JCAS) has the potential to improve the overall energy, cost and frequency efficiency of IoT systems. As a first effort, we propose to optimize the MIMO-OFDM data symbols carried by sub-carriers for better time- and spatial-domain signal orthogonality. This not only boosts the availability of usable signals for JCAS, but also significantly facilitates Internet-of-Things (IoT) devices to perform high-quality sensing. We establish an optimization problem that modifies data symbols on sub-carriers to enhance the above-mentioned signal orthogonality. We also develop an efficient algorithm to solve the problem based on the majorization-minimization framework. Moreover, we discover unique signal structures and features from the newly modeled problem, which substantially reduce the complexity of majorizing the objective function. We also develop new projectors to enforce the feasibility of the obtained solution. Simulations show that, compared with the original communication waveform to achieve the same sensing performance, the optimized waveform can reduce the signal-to-noise ratio (SNR) requirement by 3~4.5 dB, while the SNR loss for the uncoded bit error rate is only 1~1.5 dB.

eess.SP↗

arXiv2022

Integration of Radar Sensing into Communications with Asynchronous Transceivers

Clock asynchronism is a critical issue in integrating radar sensing into communication networks. It can cause ranging ambiguity and prevent coherent processing of dis-continuous measurements in integration with asynchronous transceivers. Should it be resolved, sensing can be efficiently realized in communication networks, requiring little network infrastructure and hardware changes. This article provides a systematic overview of existing and potential new techniques for tackling this fundamental problem. We first review existing solutions, including using a fine-tuned global reference clock, and single-node-based and network-based techniques. We then examine open problems and research opportunities, offering insights into what may be better realized in each of the three solution areas.

eess.SP↗

arXiv2021

OTFS-Based Joint Communication and Sensing for Future Industrial IoT

Effective wireless communications are increasingly important in maintaining the successful closed-loop operation of mission-critical industrial Internet-of-Things (IIoT) applications. To meet the ever-increasing demands on better wireless communications for IIoT, we propose an orthogonal time-frequency space (OTFS) waveform-based joint communication and radio sensing (JCAS) scheme -- an energy-efficient solution for not only reliable communications but also high-accuracy sensing. OTFS has been demonstrated to have higher reliability and energy efficiency than the currently popular IIoT communication waveforms. JCAS has also been highly recommended for IIoT, since it saves cost, power and spectrum compared to having two separate radio frequency systems. Performing JCAS based on OTFS, however, can be hindered by a lack of effective OTFS sensing. This paper is dedicated to filling this technology gap. We first design a series of echo pre-processing methods that successfully remove the impact of communication data symbols in the time-frequency domain, where major challenges, like inter-carrier and inter-symbol interference and noise amplification, are addressed. Then, we provide a comprehensive analysis of the signal-to-interference-plus-noise ratio (SINR) for sensing and optimize a key parameter of the proposed method to maximize the SINR. Extensive simulations show that the proposed sensing method approaches the maximum likelihood estimator with respect to the estimation accuracy of target parameters and manifests applicability to wide ranges of key system parameters. Notably, the complexity of the proposed method is only dominated by a two-dimensional Fourier transform.

eess.SP↗

arXiv2021

Enabling Joint Communication and Radar Sensing in Mobile Networks -- A Survey

Mobile network is evolving from a communication-only network towards one with joint communication and radar/radio sensing (JCAS) capabilities, that we call perceptive mobile network (PMN). In PMNs, JCAS integrates sensing into communications, sharing a majority of system modules and the same transmitted signals. The PMN is expected to provide a ubiquitous radio sensing platform and enable a vast number of novel smart applications, whilst providing non-compromised communications. In this paper, we present a broad picture of the motivation, methodologies, challenges, and research opportunities of realizing PMN, by providing a comprehensive survey for systems and technologies developed mainly in the last ten years. Beginning by reviewing the work on coexisting communication and radar systems, we highlight their limits on addressing the interference problem, and then introduce the JCAS technology. We then set up JCAS in the mobile network context and envisage its potential applications. We continue to provide a brief review of three types of JCAS systems, with particular attention to their differences in design philosophy. We then introduce a framework of PMN, including the system platform and infrastructure, three types of sensing operations, and signals usable for sensing. Subsequently, we discuss required system modifications to enable sensing on current communication-only infrastructure. Within the context of PMN, we review stimulating research problems and potential solutions, organized under nine topics: performance bounds, waveform optimization, antenna array design, clutter suppression, sensing parameter estimation, resolution of sensing ambiguity, pattern analysis, networked sensing under cellular topology, and sensing-assisted communications. We conclude the paper by listing key open research problems for the aforementioned topics and sharing some lessons that we have learned.

eess.SP↗

arXiv2021

Integrating Low-Complexity and Flexible Sensing into Communication Systems

Integrating sensing into standardized communication systems can potentially benefit many consumer applications that require both radio frequency functions. However, without an effective sensing method, such integration may not achieve the expected gains of cost and energy efficiency. Existing sensing methods, which use communication payload signals, either have limited sensing performance or suffer from high complexity. In this paper, we develop a novel and flexible sensing framework which has a complexity only dominated by a Fourier transform and also provides the flexibility in adapting for different sensing needs. We propose to segment a whole block of echo signal evenly into sub-blocks; adjacent ones are allowed to overlap. We design a virtual cyclic prefix (VCP) for each sub-block that allows us to employ two common ways of removing communication data symbols and generate two types of range-Doppler maps (RDMs) for sensing. We perform a comprehensive analysis of the signal components in the RDMs, proving that their interference-plus-noise (IN) terms are approximately Gaussian distributed. The statistical properties of the distributions are derived, which leads to the analytical comparisons between the two RDMs as well as between the prior and our sensing methods. Moreover, the impact of the lengths of sub-block, VCP and overlapping signal on sensing performance is analyzed. Criteria for designing these lengths for better sensing performance are also provided. Extensive simulations validate the superiority of the proposed sensing framework over prior methods in terms of signal-to-IN ratios in RDMs, detecting performance and flexibility.

eess.SP↗

arXiv2021

Upcycling Low-Nickel Polycrystalline Cathodes from Retired Electric Vehicle Batteries into Single-Crystal Nickel-Rich Cathodes

The electrification revolution in automobile industry and others demands annual production capacity of batteries at least on the order of 102 gigawatts hours, which presents a twofold challenge to supply of key materials such as cobalt and nickel and to recycling when the batteries retire. Pyrometallurgical and hydrometallurgical recycling are currently used in industry but suffer from complexity, high costs, and secondary pollution. Here we report a direct-recycling method in molten salts (MSDR) that is environmentally benign and value-creating based on a techno-economic analysis using real-world data and price information. We also experimentally demonstrate the feasibility of MSDR by upcycling a low-nickel polycrystalline LiNi0.5Mn0.3Co0.2O2 (NMC) cathode material that is widely used in early-year electric vehicles into Ni-rich (Ni > 65%) single-crystal NMCs with increased energy-density (>10% increase) and outstanding electrochemical performance (>94% capacity retention after 500 cycles in pouch-type full cells). This work opens up new opportunities for closed-loop recycling of electric vehicle batteries and manufacturing of next-generation NMC cathode materials.

physics.app-ph↗

arXiv2021

Proton distribution visualization in perovskite nickelate devices utilizing nanofocused X-rays

We use a 30-nm x-ray beam to study the spatially resolved properties of a SmNiO$_3$-based nanodevice that is doped with protons. The x-ray absorption spectra supported by density-functional theory (DFT) simulations show partial reduction of nickel valence in the region with high proton concentration, which leads to the insulating behavior. Concurrently, x-ray diffraction reveals only a small lattice distortion in the doped regions. Together, our results directly show that the knob which proton doping modifies is the electronic valency, and not the crystal lattice. The studies are relevant to on-going efforts to disentangle structural and electronic effects across metal-insulator phase transitions in correlated oxides.

cond-mat.mtrl-sci↗