arXiv subjects

Xiqi Gao

Publications and source records attributed to Xiqi Gao.

At least 91 records · Page 5Linked to original sources

arXiv2021

A General 3D Non-Stationary Wireless Channel Model for 5G and Beyond

In this paper, a novel three-dimensional (3D) non-stationary geometry-based stochastic model (GBSM) for the fifth generation (5G) and beyond 5G (B5G) systems is proposed. The proposed B5G channel model (B5GCM) is designed to capture various channel characteristics in (B)5G systems such as space-time-frequency (STF) non-stationarity, spherical wavefront (SWF), high delay resolution, time-variant velocities and directions of motion of the transmitter, receiver, and scatterers, spatial consistency, etc. By combining different channel properties into a general channel model framework, the proposed B5GCM is able to be applied to multiple frequency bands and multiple scenarios, including massive multiple-input multiple-output (MIMO), vehicle-to-vehicle (V2V), high-speed train (HST), and millimeter wave-terahertz (mmWave-THz) communication scenarios. Key statistics of the proposed B5GCM are obtained and compared with those of standard 5G channel models and corresponding measurement data, showing the generalization and usefulness of the proposed model.

eess.SP↗

arXiv2020

Energy Efficiency and Spectral Efficiency Tradeoff in RIS-Aided Multiuser MIMO Uplink Transmission

The emergence of reconfigurable intelligent surfaces (RISs) enables us to establish programmable radio wave propagation that caters for wireless communications, via employing low-cost passive reflecting units. This work studies the non-trivial tradeoff between energy efficiency (EE) and spectral efficiency (SE) in multiuser multiple-input multiple-output (MIMO) uplink communications aided by a RIS equipped with discrete phase shifters. For reducing the required signaling overhead and energy consumption, our transmission strategy design is based on the partial channel state information (CSI), including the statistical CSI between the RIS and user terminals (UTs) and the instantaneous CSI between the RIS and the base station. To investigate the EE-SE tradeoff, we develop a framework for the joint optimization of UTs' transmit precoding and RIS reflective beamforming to maximize a performance metric called resource efficiency (RE). For the design of UT's precoding, it is simplified into the design of UTs' transmit powers with the aid of the closed-form solutions of UTs' optimal transmit directions. To avoid the high complexity in computing the nested integrals involved in the expectations, we derive an asymptotic deterministic objective expression. For the design of the RIS phases, an iterative mean-square error minimization approach is proposed via capitalizing on the homotopy, accelerated projected gradient, and majorization-minimization methods. Numerical results illustrate the effectiveness and rapid convergence rate of our proposed optimization framework.

cs.IT↗

arXiv2020

Compressive Sensing Based Adaptive Active User Detection and Channel Estimation: Massive Access Meets Massive MIMO

This paper considers massive access in massive multiple-input multiple-output (MIMO) systems and proposes an adaptive active user detection and channel estimation scheme based on compressive sensing. By exploiting the sporadic traffic of massive connected user equipments and the virtual angular domain sparsity of massive MIMO channels, the proposed scheme can support massive access with dramatically reduced access latency. Specifically, we design non-orthogonal pseudo-random pilots for uplink broadband massive access, and formulate the active user detection and channel estimation problems as a generalized multiple measurement vector compressive sensing problem. Furthermore, by leveraging the structured sparsity of the uplink channel matrix, we propose an efficient generalized multiple measurement vector approximate message passing (GMMV-AMP) algorithm to realize simultaneous active user detection and channel estimation based on a spatial domain or an angular domain channel model. To jointly exploit the channel sparsity presented in both the spatial and the angular domains for enhanced performance, a Turbo-GMMV-AMP algorithm is developed for detecting the active users and estimating their channels in an alternating manner. Finally, an adaptive access scheme is proposed, which adapts the access latency to guarantee reliable massive access for practical systems with unknown channel sparsity level. Additionally, the state evolution of the proposed GMMV-AMP algorithm is derived to predict its performance. Simulation results demonstrate the superiority of the proposed active user detection and channel estimation schemes compared to several baseline schemes.

eess.SP↗

arXiv2020

6G Oriented Wireless Communication Channel Characteristics Analysis and Modeling

Based on the vision on the 6G wireless communication network, i.e., global coverage, all spectrums and all applications, we comprehensively survey 6G related wireless channel measurements, channel characteristics, and channel models for all frequency bands and all scenarios. Millimeter wave (mmWave), terahertz (THz), optical band, satellite, unmanned aerial vehicle (UAV), maritime, underwater acoustic, high-speed train (HST), vehicle-to-vehicle (V2V), massive/ ultra-massive multiple-input multiple-output (MIMO), orbital angular momentum (OAM), and industry Internet of things (IoT) communication channels were particularly investigated. The related 6G channel measurement and modeling results were also given. Finally, future research challenges on 6G channel measurements and modeling were pointed out.

eess.SP↗

arXiv2020

Multi-Frequency Multi-Scenario Millimeter Wave MIMO Channel Measurements and Modeling for B5G Wireless Communication Systems

Millimeter wave (mmWave) bands have been utilized for the fifth generation (5G) communication systems and will no doubt continue to be deployed for beyond 5G (B5G). However, the underlying channels are not fully investigated at multifrequency bands and in multi-scenarios by using the same channel sounder, especially for the outdoor, multiple-input multiple-output (MIMO), and vehicle-to-vehicle (V2V) conditions. In this paper, we conduct multi-frequency multi-scenario mmWave MIMO channel measurements with 4*4 antennas at 28, 32, and 39 GHz bands for three cases, i.e., the human body and vehicle blockage measurements, outdoor path loss measurements, and V2V measurements. The channel characteristics, including blockage effect, path loss and coverage range, and non-stationarity and spatial consistency, are thoroughly studied. The blockage model, path loss model, and time-varying channel model are proposed for mmWave MIMO channels. The channel measurement and modeling results will be of great importance for further mmWave communication system deployments in indoor hotspot, outdoor, and vehicular network scenarios for B5G.

eess.SP↗

arXiv2020

Massive Access in Cell-Free Massive MIMO-Based Internet of Things: Cloud Computing and Edge Computing Paradigms

This paper studies massive access in cell-free massive multi-input multi-output (MIMO) based Internet of Things and solves the challenging active user detection (AUD) and channel estimation (CE) problems. For the uplink transmission, we propose an advanced frame structure design to reduce the access latency. Moreover, by considering the cooperation of all access points (APs), we investigate two processing paradigms at the receiver for massive access: cloud computing and edge computing. For cloud computing, all APs are connected to a centralized processing unit (CPU), and the signals received at all APs are centrally processed at the CPU. While for edge computing, the central processing is offloaded to part of APs equipped with distributed processing units, so that the AUD and CE can be performed in a distributed processing strategy. Furthermore, by leveraging the structured sparsity of the channel matrix, we develop a structured sparsity-based generalized approximated message passing (SS-GAMP) algorithm for reliable joint AUD and CE, where the quantization accuracy of the processed signals is taken into account. Based on the SS-GAMP algorithm, a successive interference cancellation-based AUD and CE scheme is further developed under two paradigms for reduced access latency. Simulation results validate the superiority of the proposed approach over the state-of-the-art baseline schemes. Besides, the results reveal that the edge computing can achieve the similar massive access performance as the cloud computing, and the edge computing is capable of alleviating the burden on CPU, having a faster access response, and supporting more flexible AP cooperation.

cs.IT↗

arXiv2020

Robust Precoding in Massive MIMO: A Deep Learning Approach

In this paper, we consider massive multiple-input-multiple-output (MIMO) communication systems with a uniform planar array (UPA) at the base station (BS) and investigate the downlink precoding with imperfect channel state information (CSI). By exploiting both instantaneous and statistical CSI, we aim to design precoding vectors to maximize the ergodic rate (e.g., sum rate, minimum rate and etc.) subject to a total transmit power constraint. To maximize an upper bound of the ergodic rate, we leverage the corresponding Lagrangian formulation and identify the structural characteristics of the optimal precoder as the solution to a generalized eigenvalue problem. As such, the high-dimensional precoder design problem turns into a low-dimensional power control problem. The Lagrange multipliers play a crucial role in determining both precoder directions and power parameters, yet are challenging to be solved directly. To figure out the Lagrange multipliers, we develop a general framework underpinned by a properly designed neural network that learns directly from CSI. To further relieve the computational burden, we obtain a low-complexity framework by decomposing the original problem into computationally efficient subproblems with instantaneous and statistical CSI handled separately. With the off-line pretrained neural network, the online computational complexity of precoding is substantially reduced compared with the existing iterative algorithm while maintaining nearly the same performance.

cs.IT↗

arXiv2020

Network Massive MIMO Transmission Over Millimeter-Wave and Terahertz Bands: Mobility Enhancement and Blockage Mitigation

Mobility and blockage are two critical challenges in wireless transmission over millimeter-wave (mmWave) and Terahertz (THz) bands. In this paper, we investigate network massive multiple-input multiple-output (MIMO) transmission for mmWave/THz downlink in the presence of mobility and blockage. Considering the mmWave/THz propagation characteristics, we first propose to apply per-beam synchronization for network massive MIMO to mitigate the channel Doppler and delay dispersion effects. Accordingly, we establish a transmission model. We then investigate network massive MIMO downlink transmission strategies with only the statistical channel state information (CSI) available at the base stations (BSs), formulating the strategy design problem as an optimization problem to maximize the network sum-rate. We show that the beam domain is favorable to perform transmission, and demonstrate that BSs can work individually when sending signals to user terminals. Based on these insights, the network massive MIMO precoding design is reduced to a network sum-rate maximization problem with respect to beam domain power allocation. By exploiting the sequential optimization method and random matrix theory, an iterative algorithm with guaranteed convergence performance is further proposed for beam domain power allocation. Numerical results reveal that the proposed network massive MIMO transmission approach with the statistical CSI can effectively alleviate the blockage effects and provide mobility enhancement over mmWave and THz bands.

eess.SP↗

arXiv2020

Spectral Efficiency and Energy Efficiency Tradeoff in Massive MIMO Downlink Transmission with Statistical CSIT

As a key technology for future wireless networks, massive multiple-input multiple-output (MIMO) can significantly improve the energy efficiency (EE) and spectral efficiency (SE), and the performance is highly dependant on the degree of the available channel state information (CSI). While most existing works on massive MIMO focused on the case where the instantaneous CSI at the transmitter (CSIT) is available, it is usually not an easy task to obtain precise instantaneous CSIT. In this paper, we investigate EE-SE tradeoff in single-cell massive MIMO downlink transmission with statistical CSIT. To this end, we aim to optimize the system resource efficiency (RE), which is capable of striking an EE-SE balance. We first figure out a closed-form solution for the eigenvectors of the optimal transmit covariance matrices of different user terminals, which indicates that beam domain is in favor of performing RE optimal transmission in massive MIMO downlink. Based on this insight, the RE optimization precoding design is reduced to a real-valued power allocation problem. Exploiting the techniques of sequential optimization and random matrix theory, we further propose a low-complexity suboptimal two-layer water-filling-structured power allocation algorithm. Numerical results illustrate the effectiveness and near-optimal performance of the proposed statistical CSI aided RE optimization approach.

eess.SP↗

arXiv2020

Reconfigurable Intelligent Surfaces-Assisted Multiuser MIMO Uplink Transmission with Partial CSI

This paper considers the application of reconfigurable intelligent surfaces (RISs) (a.k.a. intelligent reflecting surfaces (IRSs)) to assist multiuser multiple-input multiple-output (MIMO) uplink transmission from several multi-antenna user terminals (UTs) to a multi-antenna base station (BS). For reducing the signaling overhead, only partial channel state information (CSI), including the instantaneous CSI between the RIS and the BS as well as the slowly varying statistical CSI between the UTs and the RIS, is exploited in our investigation. In particular, an optimization framework is proposed for jointly designing the transmit covariance matrices of the UTs and the RIS phase shift matrix to maximize the system global energy efficiency (GEE) with partial CSI. We first obtain closed-form solutions for the eigenvectors of the optimal transmit covariance matrices of the UTs. Then, to facilitate the design of the transmit power allocation matrices and the RIS phase shifts, we derive an asymptotically deterministic equivalent of the objective function with the aid of random matrix theory. We further propose a suboptimal algorithm to tackle the GEE maximization problem with guaranteed convergence, capitalizing on the approaches of alternating optimization, fractional programming, and sequential optimization. Numerical results substantiate the effectiveness of the proposed approach as well as the considerable GEE gains provided by the RIS-assisted transmission scheme over the traditional baselines.

cs.IT↗

arXiv2020

Massive Access for Future Wireless Communication Systems

Multiple access technology played an important role in wireless communication in the last decades: it increases the capacity of the channel and allows different users to access the system simultaneously. However, the conventional multiple access technology, as originally designed for current human-centric wireless networks, is not scalable for future machine-centric wireless networks. Massive access (studied in the literature under such names as massive-device multiple access, unsourced massive random access, massive connectivity, massive machine-type communication, and many-access channels) exhibits a clean break with current networks by potentially supporting millions of devices in each cellular network. The tremendous growth in the number of connected devices requires a fundamental rethinking of the conventional multiple access technologies in favor of new schemes suited for massive random access. Among the many new challenges arising in this setting, the most relevant are: the fundamental limits of communication from a massive number of bursty devices transmitting simultaneously with short packets, the design of low complexity and energy-efficient massive access coding and communication schemes, efficient methods for the detection of a relatively small number of active users among a large number of potential user devices with sporadic transmission pattern, and the integration of massive access with massive MIMO and other important wireless communication technologies. This paper presents an overview of the concept of massive access wireless communication and of the contemporary research on this important topic.

cs.IT↗

arXiv2020

Massive MIMO Transmission for LEO Satellite Communications

Low earth orbit (LEO) satellite communications are expected to be incorporated in future wireless networks, in particular 5G and beyond networks, to provide global wireless access with enhanced data rates. Massive MIMO techniques, though widely used in terrestrial communication systems, have not been applied to LEO satellite communication systems. In this paper, we propose a massive MIMO transmission scheme with full frequency reuse (FFR) for LEO satellite communication systems and exploit statistical channel state information (sCSI) to address the difficulty of obtaining instantaneous CSI (iCSI) at the transmitter. We first establish the massive MIMO channel model for LEO satellite communications and simplify the transmission designs via performing Doppler and delay compensations at user terminals (UTs). Then, we develop the low-complexity sCSI based downlink (DL) precoder and uplink (UL) receiver in closed-form, aiming to maximize the average signal-to-leakage-plus-noise ratio (ASLNR) and the average signal-to-interference-plus-noise ratio (ASINR), respectively. It is shown that the DL ASLNRs and UL ASINRs of all UTs reach their upper bounds under some channel condition. Motivated by this, we propose a space angle based user grouping (SAUG) algorithm to schedule the served UTs into different groups, where each group of UTs use the same time and frequency resource. The proposed algorithm is asymptotically optimal in the sense that the lower and upper bounds of the achievable rate coincide when the number of satellite antennas or UT groups is sufficiently large. Numerical results demonstrate that the proposed massive MIMO transmission scheme with FFR significantly enhances the data rate of LEO satellite communication systems. Notably, the proposed sCSI based precoder and receiver achieve the similar performance with the iCSI based ones that are often infeasible in practice.

cs.IT↗

arXiv2020

Energy Efficiency Optimization for Downlink Massive MIMO With Statistical CSIT

We investigate energy efficiency (EE) optimization for single-cell massive multiple-input multiple-output (MIMO) downlink transmission with only statistical channel state information (CSI) available at the base station. We first show that beam domain transmission is favorable for energy efficiency in the massive MIMO downlink, by deriving a closed-form solution for the eigenvectors of the optimal transmit covariance matrix. With this conclusion, the EE optimization problem is reduced to a real-valued power allocation problem, which is much easier to tackle than the original large-dimensional complex matrix-valued precoding design problem. We further propose an iterative water-filling-structured beam domain power allocation algorithm with low complexity and guaranteed convergence, exploiting the techniques from sequential optimization, fractional optimization, and random matrix theory. Numerical results demonstrate the near-optimal performance of our proposed statistical CSI aided EE optimization approach.

cs.IT↗

arXiv2020

A Novel Massive MIMO Beam Domain Channel Model

A novel beam domain channel model (BDCM) for massive multiple-input multiple-output (MIMO) communication systems has been proposed in this paper. The near-field effect and spherical wavefront are firstly assumed in the proposed model, which is different from the conventional BDCM for MIMO based on the far-field effect and plane wavefront assumption. The proposed novel BDCM is the transformation of an existing geometry-based stochastic model (GBSM) from the antenna domain into beam domain. The space-time non-stationarity is also modeled in the novel BDCM. Moreover, the comparison of computational complexity for both models is studied. Based on the numerical analysis, comparison of cluster-level statistical properties between the proposed BDCM and existing GBSM has shown that there exists little difference in the space, time, and frequency correlation properties for two models. Also, based on the simulation, coherence bandwidths of the two models in different scenarios are almost the same. The computational complexity of the novel BDCM is much lower than the existing GBSM. It can be observed that the proposed novel BDCM has similar statistical properties to the existing GBSM at the clusterlevel. The proposed BDCM has less complexity and is therefore more convenient for information theory and signal processing research than the conventional GBSMs.

eess.SP↗

arXiv2019

Practical Modeling and Analysis of Blockchain Radio Access Network

The continually rising demand for wireless services and applications in the era of Internet of things (IoT) and artificial intelligence (AI) presents a significant number of unprecedented challenges to existing network structures. To meet the rapid growth need of mobile data services, blockchain radio access network (B-RAN) has emerged as a decentralized, trustworthy radio access paradigm spurred by blockchain technologies. However, many characteristics of B-RAN remain unclear and hard to characterize. In this study, we develop an analytical framework to model B-RAN and provide some basic fundamental analysis. Starting from block generation, we establish a queuing model based on a time-homogeneous Markov chain. From the queuing model, we evaluate the performance of B-RAN with respect to latency and security considerations. By connecting latency and security, we uncover a more comprehensive picture of the achievable performance of B-RAN. Further, we present experimental results via an innovative prototype and validate the proposed model.

cs.NI↗

arXiv2019

Learning to Localize: A 3D CNN Approach to User Positioning in Massive MIMO-OFDM Systems

In this paper, we consider the user positioning problem in the massive multiple-input multiple-output (MIMO) orthogonal frequency-division multiplexing (OFDM) system with a uniform planner antenna (UPA) array. Taking advantage of the UPA array geometry and wide bandwidth, we advocate the use of the angle-delay channel power matrix (ADCPM) as a new type of fingerprint to replace the traditional ones. The ADCPM embeds the stable and stationary multipath characteristics, e.g. delay, power, and angle in the vertical and horizontal directions, which are beneficial to positioning. Taking ADCPM fingerprints as the inputs, we propose a novel three-dimensional (3D) convolution neural network (CNN) enabled learning method to localize users' 3D positions. In particular, such a 3D CNN model consists of a convolution refinement module to refine the elementary feature maps from the ADCPM fingerprints, three extended Inception modules to extract the advanced feature maps, and a regression module to estimate the 3D positions. By intensive simulations, the proposed 3D CNN-enabled positioning method is demonstrated to achieve higher positioning accuracy than the traditional searching-based ones, with reduced computational complexity and storage overhead, and the ADCPM fingerprints are more robust to noise contamination.

eess.SP↗

arXiv2019

Omnidirectional Quasi-Orthogonal Space-Time Block Coded Massive MIMO Systems

Common signals in public channels of cellular systems are usually transmitted omnidirectionally from the base station (BS). In recent years, both discrete and consecutive omnidirectional space-time block codings (STBC) have been proposed for massive multiple-input multiple-output (MIMO) systems with a uniform linear array (ULA) configuration to ensure cell-wide coverage. In these systems, constant received signal power at discrete angles, or constant received signal sum power in a few consecutive time slots at any angle is achieved. In addition, equal-power transmission per antenna and full spatial diversity can be achieved as well. In this letter, by utilizing the property of orthogonal complementary codes (OCCs), a new consecutive omnidirectional quasi-orthogonal STBC (QOSTBC) design is proposed, in which constant received sum power at any angle can be realized with equal-power transmission per antenna through one STBC transmission, and a higher diversity order of 4 can be achieved. In addition, the proposed design can be further extended to the uniform planar array (UPA) configuration with the two-dimensional OCCs.

eess.SP↗

arXiv2019

Robust Transmission for Massive MIMO Downlink with Imperfect CSI

In this paper, the design of robust linear precoders for the massive multi-input multi-output (MIMO) downlink with imperfect channel state information (CSI) is investigated. The imperfect CSI for each UE obtained at the BS is modeled as statistical CSI under a jointly correlated channel model with both channel mean and channel variance information, which includes the effects of channel estimation error, channel aging and spatial correlation. The design objective is to maximize the expected weighted sum-rate. By combining the minorize-maximize (MM) algorithm with the deterministic equivalent method, an algorithm for robust linear precoder design is derived. The proposed algorithm achieves a stationary point of the expected weighted sum-rate maximization problem. To reduce the computational complexity, two low-complexity algorithms are then derived. One for the general case, and the other for the case when all the channel means are zeros. For the later case, it is proved that the beam domain transmission is optimal, and thus the precoder design reduces to the power allocation optimization in the beam domain. Simulation results show that the proposed robust linear precoder designs apply to various mobile scenarios and achieve high spectral efficiency.

cs.IT↗