Searcharxiv⌕ Search

arXiv subjects

Yong Liang Guan

Publications and source records attributed to Yong Liang Guan.

At least 55 records · Page 3Linked to original sources

Joint User Association and Beamforming Design for ISAC Networks with Large Language Models

Integrated sensing and communication (ISAC) has been envisioned to play a more important role in future wireless networks. However, the design of ISAC networks is challenging, especially when there are multiple communication and sensing (C\&S) nodes and multiple sensing targets. We investigate a multi-base station (BS) ISAC network in which multiple BSs equipped with multiple antennas simultaneously provide C\&S services for multiple ground communication users (CUs) and targets. To enhance the overall performance of C\&S, we formulate a joint user association (UA) and multi-BS transmit beamforming optimization problem with the objective of maximizing the total sum rate of all CUs while ensuring both the minimum target detection and parameter estimation requirements. To efficiently solve the highly non-convex mixed integer nonlinear programming (MINLP) optimization problem, we propose an alternating optimization (AO)-based algorithm that decomposes the problem into two sub-problems, i.e., UA optimization and multi-BS transmit beamforming optimization. Inspired by large language models (LLMs) for prediction and inference, we propose a unified framework integrating LLMs with convex-based optimization methods. First, we propose a comprehensive design of prompt engineering, including few-shot, chain of thought, and self-reflection techniques to guide LLMs in solving the binary integer programming UA optimization problem. Second, we utilize convex-based optimization methods to handle the non-convex beamforming optimization problem based on fractional programming (FP), majorization minimization (MM), and the alternating direction method of multipliers (ADMM) with an optimized UA from LLMs. Numerical results demonstrate that our proposed LLM-enabled AO-based algorithm achieves fast convergence and near upper-bound performance with the GPT-o1 model, outperforming various benchmark schemes.

cs.IT↗

Local Ambiguity Shaping for Doppler-Resilient Sequences Under Spectral and PAPR Constraints

This paper focuses on designing Doppler-resilient sequences with low local Ambiguity Function (AF) sidelobes, subject to certain spectral and Peak-to-Average Power Ratio (PAPR) constraints. To achieve this, we propose two distinctoptimization algorithms: (i) an Alternating Minimization (AM) algorithm for superior Weighted Peak Sidelobe Level (WPSL) minimization, and (ii) a low-complexity Augmented Lagrangian-assisted Majorization Minimization (ALaMM) algorithm with effective WPSL suppression. The proposed schemes hold great potential for sequence design in future 6G and integrated sensing and communication applications, supporting robust sensing under spectral coexistence constraints in high-mobility scenarios.

eess.SP↗

Generalized Arlery-Tan-Rabaste-Levenshtein Lower Bounds on Ambiguity Function and Their Asymptotic Achievability

This paper presents generalized Arlery-Tan-Rabaste-Levenshtein lower bounds on the maximum aperiodic ambiguity function (AF) magnitude of unimodular sequences under certain delay-Doppler low ambiguity zones (LAZ). Our core idea is to explore the upper and lower bounds on the Frobenius norm of the weighted auto- and cross-AF matrices by introducing two weight vectors associated with the delay and Doppler shifts, respectively. As a second major contribution, we demonstrate that our derived lower bounds are asymptotically achievable with selected Chu sequence sets by analyzing their maximum auto- and cross- AF magnitudes within certain LAZ.

cs.IT↗

Compact Varactor-Integrated RIS for Wideband and Continuously Tunable Beamforming

This letter presents a novel Reconfigurable Intelligent Surface (RIS) that features a low-profile structure, wide operating bandwidth, and continuous phase control. By incorporating a middle patch layer without introducing an additional air gap, the proposed design maintains a thin form factor, while achieving a smooth 310° phase shift over 10\% bandwidth at 6.1 GHz with excellent reflection. A fabricated 10*10 RIS array exhibits stable performance, enabling precise beam control across a 600 MHz bandwidth. These results highlight the potential of the proposed low-profile, wideband RIS with continuous phase tuning for next-generation wireless communication systems.

eess.SP↗

Focusing Metasurfaces of (Un)equal Power Allocations for Wireless Power Transfer

Focusing metasurfaces (MTSs) tailored for different power allocations in wireless power transfer (WPT) system are proposed in this letter. The designed metasurface unit cells ensure that the phase shift can cover over a 2π span with high transmittance. Based on near-field focusing theory, an adapted formula is employed to guide the phase distribution for compensating incident waves. Three MTSs, each with dimensions of 190*190 mm and comprising 19*19 unit cells, are constructed to achieve dual-polarized two foci with 1:1, 2:1, and 3:1 power allocations, yielding maximum focusing efficiencies of 71.6%, 65.2%, and 57.5%, respectively. The first two MTSs are fabricated and tested, demonstrating minimal -3 dB depth of focus (DOF). Results are aligned with theoretical predictions. These designs aim to facilitate power transfer to different systems based on their specific requirements in an internet of things (IoT) environment.

eess.SP↗

A Novel Angle-Delay-Doppler Estimation Scheme for AFDM-ISAC System in Mixed Near-field and Far-field Scenarios

The recently proposed multi-chirp waveform, affine frequency division multiplexing (AFDM), is considered as a potential candidate for integrated sensing and communication (ISAC). However, acquiring accurate target sensing parameter information becomes challenging due to fractional delay and Doppler shift occurrence, as well as effects introduced by the coexistence of near-field (NF) and far-field (FF) targets associated with large-scale antenna systems. In this paper, we propose a novel angle-delay-Doppler estimation scheme for AFDM-ISAC system in mixed NF and FF scenarios. Specifically, we model the received ISAC signals as a third-order tensor that admits a low-rank CANDECOMP/PARAFAC (CP) format. By employing the Vandermonde nature of the factor matrix and the spatial smoothing technique, we develop a structured CP decomposition method that guarantees the condition for uniqueness. We further propose a low-complexity estimation scheme to acquire target sensing parameters with fractional values, including angle of arrival/departure (AoA/AoD), delay and Doppler shift accurately. We also derive the Cramér-Rao Lower Bound (CRLB) as a benchmark and analyze the complexity of our proposed scheme. Finally, simulation results are provided to demonstrate the effectiveness and superiority of our proposed scheme.

eess.SP↗

Target Sensing With Off-grid Sparse Bayesian Learning for AFDM-ISAC System

The recently proposed multi-chirp waveform, affine frequency division multiplexing (AFDM), is regarded as a prospective candidate for integrated sensing and communication (ISAC) due to its robust performance in high-mobility scenarios and full diversity achievement in doubly dispersive channels. However, the insufficient Doppler resolution caused by limited transmission duration can reduce the accuracy of parameter estimation. In this paper, we propose a new off-grid target parameter estimation scheme to jointly estimate the range and velocity of the targets for AFDM-ISAC system, where the off-grid Doppler components are incorporated to enhance estimation accuracy. Specifically, we form the sensing model as an off-grid sparse signal recovery problem relying on the virtual delay and Doppler grids defined in the discrete affine Fourier (DAF) domain, where the off-grid components are regarded as hyper-parameters for estimation. We also employ the expectation-maximization (EM) technique via a sparse Bayesian learning (SBL) framework to update hyper-parameters iteratively. Simulation results indicate that our proposed off-grid algorithm outperforms existing algorithms in sensing performance and is highly robust to the AFDM-ISAC high-mobility scenario.

eess.SP↗

Flag Sequence Set Design for Low-Complexity Delay-Doppler Estimation

This paper studies Flag sequences for low-complexity delay-Doppler estimation by exploiting their distinctive peak-curtain ambiguity functions (AFs). Unlike the existing Flag sequence designs that are limited to prime lengths and periodic auto-AFs, we aim to design Flag sequence sets of arbitrary lengths with low (nontrivial) periodic/aperiodic auto- and cross-AFs. Since every Flag sequence consists of a Curtain sequence and a Peak sequence, we first investigate the algebraic design of Curtain sequence sets of arbitrary lengths. Our proposed design gives rise to novel Curtain sequence sets with ideal curtain auto-AFs and zero/near-zero cross-AFs within the delay-Doppler zone of operation. Leveraging these Curtain sequence sets, two optimization problems are formulated to minimize the weighted integrated masked sidelobe level (WImSL) of the Flag sequence set. Accelerated parallel partially majorization-minimization algorithms are proposed to jointly optimize the transmit Flag sequences and symmetric/asymmetric reference sequences stored in the receiver. Simulations demonstrate that our proposed Flag sequences lead to improved WImSL and peak-to-max-masked-sidelobe ratio compared with the existing Flag sequences. Additionally, our Flag sequences under the Flag method exhibit Mean Squared Errors that approach the Cramér-Rao lower bound and the sampling bound at high signal-to-noise power ratios.

cs.IT↗

Chirped DFT-s-OFDM: A new single-carrier waveform with enhanced LMMSE noise suppression

In this paper, a new single-carrier waveform, called chirped discrete Fourier transform spread orthogonal frequency division multiplexing (DFT-s-OFDM), is proposed for the sixth generation of communications. As the initial study on this waveform, its performance is analyzed and evaluated in single-user uplink multiple access communications, using a delay-Doppler channel model with independent and identically distributed path amplitudes and different integer delays. By chirping DFT-s-OFDM in the time domain, it maintains the low peak-to-average-power ratio of DFT-s-OFDM. Thanks to full-band transmission and symbols retransmission enabled by chirping and discrete Fourier transform precoding, it enhances noise suppression of linear minimum mean square error equalization. By using pairwise error probability analysis, the derived bit error rate upper bound is close to the simulated ones and the diversity order analysis confirms that it achieves full frequency diversity.

eess.SP↗

Low-Interference Near-Field Multi-User Communication Enabled by Spatially Converging Multi-Mode Vortex Waves

This paper proposes a multi-user Spatial Division Multiplexing (SDM) near-field access scheme, inspired by the orthogonal characteristics of multi-mode vortex waves. A Reconfigurable Meta-surface (RM) is ingeniously employed as the gateway for information transmission. This RM not only receives spatially overlapping multiplexed multi-mode vortex beams but also converts them into focused point beams in the near field. Specifically, a multi-port microstrip array method is utilized to generate multiple orthogonal vortex electromagnetic wave modes. Different ports serve as feeding points for baseband signals, allowing independent modulated data to be flexibly loaded onto different modes. After being adjusted by the RM, the vortex electromagnetic waves are converted into energy-focusing point beams, which can be directed to arbitrary 3D positions in the RM's near-field region and received by different users. Since the spatial positions of the point beams are non-overlapping, this approach not only ensures energy concentration but also significantly reduces inter-user interference. Near-field scanning results in a microwave anechoic chamber validate the effectiveness of this method, while real-time communication demonstrations confirm the system's capability for low-interference information multiplexing and transmission in practical scenarios.

eess.SP↗

Joint Precoder and Reflector Design for RIS-assisted Multi-user OAM Communication Systems

Orbital angular momentum (OAM) can enhance the spectral efficiency by multiplying a set of orthogonal modes on the same frequency channel. To maintain the orthogonal among different OAM modes, perfect alignments between transmitters and receivers are strictly required. However, in multi-user OAM communications, the perfect alignments between the transmitter and all the receivers are impossible. The phase turbulence, caused by misaligned transmitters and receivers, leads to serious inter-mode interference, which greatly degrades the capacity of OAM transmissions. To eliminate the negative effects of phase turbulence and further enhance the transmission capacity, we introduce RIS into the system, and propose a joint precoder and reflector design for reconfigurable intelligent surface (RIS)-assisted multi-user OAM communication systems. Specifically, we propose a three-layer design at the transmitter side, which includes inter-user OAM mode interference cancellation, inter-mode self-interference elimination and the power allocation among different users. By analyzing the characteristics of the overall channels, we are able to give the specific expressions of the precoder designs, which significantly reduce the optimization complexity. We further leverage RIS to guarantee the line-ofsight (LoS) transmissions between the transmitter and users for better sum rate performance. To verify the superiority of the proposed multi-user OAM transmission system, we compare it with traditional MIMO transmission schemes, numerical results have shown that our proposed design can achieve better sum rate performance due to the well-designed orthogonality among different users and OAM modes.

eess.SP↗

Rydberg Atomic Quantum Receivers for Classical Wireless Communication and Sensing

The Rydberg atomic quantum receivers (RAQR) are emerging quantum precision sensing platforms designed for receiving radio frequency (RF) signals. It relies on creation of Rydberg atoms from normal atoms by exciting one or more electrons to a very high energy level, thereby making the atom sensitive to RF signals. RAQRs realize RF-to-optical conversions based on light-atom interactions relying on the so called electromagnetically induced transparency (EIT) and Aulter-Townes splitting (ATS), so that the desired RF signal can be read out optically. The large dipole moments of Rydberg atoms associated with rich choices of Rydberg states and various modulation schemes facilitate an ultra-high sensitivity ($\sim$ nV/cm/$\sqrt{\text{Hz}}$) and an ultra-broadband tunability (direct-current to Terahertz). RAQRs also exhibit compelling scalability and lend themselves to the construction of innovative, compact receivers. Initial experimental studies have demonstrated their capabilities in classical wireless communications and sensing. To fully harness their potential in a wide variety of applications, we commence by outlining the underlying fundamentals of Rydberg atoms, followed by the principles and schemes of RAQRs. Then, we overview the state-of-the-art studies from both physics and communication societies. Furthermore, we conceive Rydberg atomic quantum single-input single-output (RAQ-SISO) and multiple-input multiple-output (RAQ-MIMO) schemes for facilitating the integration of RAQRs with classical wireless systems. Finally, we conclude with a set of potent research directions.

eess.SP↗

Linear Precoding Design for OTFS Systems in Time/Frequency Selective Fading Channels

Even orthogonal time frequency space (OTFS) has been shown as a promising modulation scheme for high mobility doubly-selective fading channels, its attainability of full diversity order in either time or frequency selective fading channels has not been clarified. By performing pairwise error probability (PEP) analysis, we observe that the original OTFS system can not always guarantee full exploitation of the embedded diversity in either time or frequency selective fading channels. To address this issue and further improve system performance, this work proposes linear precoding solutions based on algebraic number theory for OTFS systems over time and frequency selective fading channels, respectively. The proposed linear precoded OTFS systems can guarantee the maximal diversity and potential coding gains in time/frequency selective fading channels without any transmission rate loss and do not require the channel state information (CSI) at the transmitter. Simulation results are finally provided to illustrate the superiority of our proposed precoded OTFS over both the original unprecoded and the existing phase rotation OTFS systems in time/frequency selective fading channels.

eess.SP↗

Experimental Study of RCS Diversity with Novel No-divergent OAM Beams

This research proposes a novel approach utilizing Orbital Angular Momentum (OAM) beams to enhance Radar Cross Section (RCS) diversity for target detection in future transportation systems. Unlike conventional OAM beams with hollow-shaped divergence patterns, the new proposed OAM beams provide uniform illumination across the target without a central energy void, but keep the inherent phase gradient of vortex property. We utilize waveguide slot antennas to generate four different modes of these novel OAM beams at X-band frequency. Furthermore, these different mode OAM beams are used to illuminate metal models, and the resulting RCS is compared with that obtained using plane waves. The findings reveal that the novel OAM beams produce significant azimuthal RCS diversity, providing a new approach for the detection of weak and small targets.This study not only reveals the RCS diversity phenomenon based on novel OAM beams of different modes but also addresses the issue of energy divergence that hinders traditional OAM beams in long-range detection applications.

eess.SP↗

From OTFS to AFDM: A Comparative Study of Next-Generation Waveforms for ISAC in Doubly-Dispersive Channels

Next-generation wireless systems will offer integrated sensing and communications (ISAC) functionalities not only in order to enable new applications, but also as a means to mitigate challenges such as doubly-dispersive channels, which arise in high mobility scenarios and/or at millimeter-wave (mmWave) and Terahertz (THz) bands. An emerging approach to accomplish these goals is the design of new waveforms, which draw from the inherent relationship between the doubly-dispersive nature of time-variant (TV) channels and the environmental features of scatterers manifested in the form of multi-path delays and Doppler shifts. Examples of such waveforms are the delay-Doppler domain orthogonal time frequency space (OTFS) and the recently proposed chirp domain affine frequency division multiplexing (AFDM), both of which seek to simultaneously combat the detrimental effects of double selectivity and exploit them for the estimation (or sensing) of environmental information. This article aims to provide a consolidated and comprehensive overview of the signal processing techniques required to support reliable ISAC over doubly-dispersive channels in beyond fifth generation (B5G)/sixth generation (6G) systems, with an emphasis on OTFS and AFDM waveforms, as those, together with the traditional orthogonal frequency division multiplexing (OFDM) waveform, suffice to elaborate on the most relevant properties of the trend. The analysis shows that OTFS and AFDM indeed enable significantly improved robustness against inter-carrier interference (ICI) arising from Doppler shifts compared to OFDM. In addition, the inherent delay-Doppler domain orthogonality of the OTFS and AFDM effective channels is found to provide significant advantages for the design and the performance of integrated sensing functionalities.

eess.SP↗

Low Complexity Joint Channel Estimation and Data Detection for AFDM Receivers With Oversampling

In this paper, we propose a novel low complexity time domain (TD) oversampling receiver framework under affine frequency division multiplexing (AFDM) waveforms for joint channel estimation and data detection (JCEDD). Leveraging a generalized doubly-dispersive channel model, we first derive the input-output (I/O) relationship for arbitrary waveforms when oversampled in the TD and present the I/O relationship for AFDM as an example. Subsequently, utilizing the multiple sample streams created via the oversampling procedure, we use the parametric bilinear Gaussian belief propagation (PBiGaBP) technique to conduct JCEDD for decoding the transmitted data and estimating the complex channel coefficients. Simulation results verify significant performance improvements both in terms of data decoding and complex channel coefficient estimation with improved robustness against a varying number of pilots over a conventional Nyquist sampling rate receiver.

eess.SP↗

Innovative RIS Prototyping Enhancing Wireless Communication with Real-Time Spot Beam Tracking and OAM Wavefront Manipulation

This paper presents a sophisticated reconfigurable metasurface architecture that introduces an advanced concept of flexible full-array space-time wavefront manipulation with enhanced dynamic capabilities. The practical 2-bit phase-shifting unit cell on the RIS is distinguished by its ability to maintain four stable phase states, each with ${90^ \circ }$ differences, and features an insertion loss of less than 0.6 dB across a bandwidth of 200 MHz. All reconfigurable units are equipped with meticulously designed control circuits, governed by an intelligent core composed of multiple Micro-Controller Units (MCUs), enabling rapid control response across the entire RIS array. Owing to the capability of each unit cell on the metasurface to independently switch states, the entire RIS is not limited to controlling general beams with specific directional patterns, but also generates beams with more complex structures, including multi-focus 3D spot beams and vortex beams. This development substantially broadens its applicability across various industrial wireless transmission scenarios. Moreover, by leveraging the rapid-respond space-time coding and the full-array independent programmability of the RIS prototyping operating at 10.7 GHz, we have demonstrated that: 1) The implementation of 3D spot beams scanning facilitates dynamic beam tracking and real-time communication under the indoor near-field scenario; 2) The rapid wavefront rotation of vortex beams enables precise modulation of signals within the Doppler domain, showcasing an innovative approach to wireless signal manipulation; 3) The beam steering experiments for blocking users under outdoor far-field scenarios, verifying the beamforming capability of the RIS board.

eess.SP↗

Near-Orthogonal Overlay Communications in LoS Channel Enabled by Novel OAM Beams without Central Energy Voids: An Experimental Study

This paper introduces a groundbreaking Line-of-Sight (LoS) Multiple-Input Multiple-Output (MIMO) communication architecture leveraging non-traditional Orbital Angular Momentum (OAM) beams. Challenging the conventional paradigm of hollow-emitting OAM beams, this study presents an innovative OAM transmitter design that produces directional OAM beams without central energy voids, aligning their radiation patterns with those of conventional planar wave horn antennas. Within the main lobe of these antennas, the phase variation characteristics inherent to OAM beams are ingeniously maintained, linking different OAM modes to the linear wavefront variation gradients, thereby reducing channel correlation in LoS scenarios and significantly augmenting the channel capacity of LoS-MIMO frameworks. Empirical validations conducted through a meticulously designed LoS-MIMO experimental platform reveal significant improvements in channel correlation coefficients, communication stability, and Bit Error Rate (BER) compared to systems utilizing traditional planar wave antennas. The experiment results underscore the potential of the novel OAM-based system to improve current LoS-MIMO communication protocols, and offer both academic and engineering guidance for the construction of practical communication infrastructures. Beyond its immediate contributions, this paper underscores a pivotal shift in the field of communications, pointing out that traditional communication algorithms have primarily focused on baseband signal processing while often overlooking the electromagnetic characteristics of the physical world.

eess.SP↗