arXiv subjects

Zhaoxiang Liu

Publications and source records attributed to Zhaoxiang Liu.

At least 73 records · Page 4Linked to original sources

arXiv2022

Application-Driven AI Paradigm for Hand-Held Action Detection

In practical applications especially with safety requirement, some hand-held actions need to be monitored closely, including smoking cigarettes, dialing, eating, etc. Taking smoking cigarettes as example, existing smoke detection algorithms usually detect the cigarette or cigarette with hand as the target object only, which leads to low accuracy. In this paper, we propose an application-driven AI paradigm for hand-held action detection based on hierarchical object detection. It is a coarse-to-fine hierarchical detection framework composed of two modules. The first one is a coarse detection module with the human pose consisting of the whole hand, cigarette and head as target object. The followed second one is a fine detection module with the fingers holding cigarette, mouth area and the whole cigarette as target. Some experiments are done with the dataset collected from real-world scenarios, and the results show that the proposed framework achieve higher detection rate with good adaptation and robustness in complex environments.

cs.CV↗

arXiv2022

Application-Driven AI Paradigm for Human Action Recognition

Human action recognition in computer vision has been widely studied in recent years. However, most algorithms consider only certain action specially with even high computational cost. That is not suitable for practical applications with multiple actions to be identified with low computational cost. To meet various application scenarios, this paper presents a unified human action recognition framework composed of two modules, i.e., multi-form human detection and corresponding action classification. Among them, an open-source dataset is constructed to train a multi-form human detection model that distinguishes a human being's whole body, upper body or part body, and the followed action classification model is adopted to recognize such action as falling, sleeping or on-duty, etc. Some experimental results show that the unified framework is effective for various application scenarios. It is expected to be a new application-driven AI paradigm for human action recognition.

cs.CV↗

arXiv2022

Monolithically integrated active passive waveguide array fabricated on thin film lithium niobate using a single continuous photolithography process

We demonstrate a robust low-loss optical interface by tiling passive (i.e., without doping of active ions) thin film lithium niobate (TFLN) and active (i.e., doped with rare earth ions) TFLN substrates for monolithic integration of passive/active lithium niobate photonics. The tiled substrates composed of both active and passive areas allow to pattern the mask of the integrated active passive photonic device at once using a single continuous photolithography process. The interface loss of tiled substrate is measured as low as 0.26 dB. Thanks to the stability provided by this approach, a four-channel waveguide amplifier is realized in a straightforward manner, which shows a net gain of ~5 dB at 1550-nm wavelength and that of ~8 dB at 1530-nm wavelength for each channel. The robust low-loss optical interface for passive/active photonic integration will facilitate large-scale high performance photonic devices which require on-chip light sources and amplifiers.

physics.optics↗

arXiv2022

A Waste Copper Granules Rating System Based on Machine Vision

In the field of waste copper granules recycling, engineers should be able to identify all different sorts of impurities in waste copper granules and estimate their mass proportion relying on experience before rating. This manual rating method is costly, lacking in objectivity and comprehensiveness. To tackle this problem, we propose a waste copper granules rating system based on machine vision and deep learning. We firstly formulate the rating task into a 2D image recognition and purity regression task. Then we design a two-stage convolutional rating network to compute the mass purity and rating level of waste copper granules. Our rating network includes a segmentation network and a purity regression network, which respectively calculate the semantic segmentation heatmaps and purity results of the waste copper granules. After training the rating network on the augmented datasets, experiments on real waste copper granules demonstrate the effectiveness and superiority of the proposed network. Specifically, our system is superior to the manual method in terms of accuracy, effectiveness, robustness, and objectivity.

cs.CV↗

arXiv2022

3D large-scale fused silica microfluidic chips enabled by hybrid laser microfabrication for continuous-flow UV photochemical synthesis

We demonstrate a hybrid laser microfabrication approach, which combines the technical merits of ultrafast laser-assisted chemical etching and carbon dioxide laser-induced in-situ melting, for centimeter-scale and bonding-free fabrication of 3D complex hollow microstructures in fused silica glass. With the developed approach, large-scale fused silica microfluidic chips with integrated 3D cascaded micromixing units can be reliably manufactured. High-performance on-chip mixing and continuous-flow photochemical synthesis under UV LEDs irradiation at ~280 nm were demonstrated using the manufactured chip, indicating a powerful capability for versatile fabrication of highly transparent all-glass microfluidic reactors for on-chip photochemical synthesis.

physics.app-ph↗

arXiv2022

Monolithically integrated waveguide-coupled single-frequency microlaser on erbium-doped thin film lithium niobate

We overcome the difficulty in realizing a monolithic waveguide-coupled microring laser integrated on erbium-doped thin film lithium niobate (Er: TFLN) using photolithography assisted chemo-mechanical etching (PLACE) technique. We demonstrate an integrated single-frequency microring laser operating around 1531 nm wavelength. The PLACE technique, enabling integrated Er: TFLN photonics with low propagation loss, can thus be used to realize low cost mass production of monolithic on-chip microlasers with applications ranging from optical communication and photonic integrated circuit (PIC) to precision metrology and large-scale sensing.

physics.optics↗

arXiv2021

A high-gain cladded waveguide amplifier on erbium doped thin-film lithium niobate fabricated using photolithography assisted chemo-mechanical etching

Erbium doped integrated waveguide amplifier and laser prevail in power consumption, footprint, stability and scalability over the counterparts in bulk materials, underpinning the lightwave communication and large-scale sensing. Subject to the highly confined mode and moderate propagation loss, gain and power scaling in such integrated micro-to-nanoscale devices prove to be more challenging compared to their bulk counterparts. In this work, stimulated by the prevalent success of double-cladding optical fiber in high-gain/power operation, a Ta2O5 cladding is employed in the erbium doped lithium niobate (LN) waveguide amplifier fabricated on the thin film lithium niobate on insulator (LNOI) wafer by the photolithography assisted chemomechanical etching (PLACE) technique. Above 20 dB small signal internal net gain is achieved at the signal wavelength around 1532 nm in the 10 cm long LNOI amplifier pumped by the diode laser at ~980 nm. Experimental characterizations reveal the advantage of Ta2O5 cladding in higher optical gain compared with the air-clad amplifier, which is further explained by the theoretical modeling of the LNOI amplifier including the guided mode structures and the steady-state response of erbium ions.

physics.optics↗

arXiv2021

On-chip multi-color microdisk laser on Yb3+-doped thin-film lithium niobate

We demonstrate an on-chip Yb3+-doped lithium niobate (LN) microdisk laser. The intrinsic quality factors of the fabricated Yb3+-doped LN microdisk resonator are measured up to 3.79x10^5 at 976 nm wavelength and 1.1x10^6 at 1514 nm wavelength. The multi-mode laser emissions are obtained in a band from 1020 nm to 1070 nm pumped by 984 nm laser and with the low threshold of 103 μW, resulting in a slope efficiency of 0.53% at room temperature. Furthermore, the second-harmonic frequency of pump light and the sum-frequency of the pump light and laser emissions are both generated in the on-chip Yb3+-doped LN microdisk benefited from the strong \c{hi}(2) nonlinearity of LN. These microdisk lasers are expected to contribute to the high-density integration of LNOI-based photonic chip.

physics.optics↗

arXiv2021

An electro-optically tunable microring laser monolithically integrated on lithium niobate on insulator

We demonstrate monolithic integration of an electro-optically (EO) tunable microring laser on lithium niobate on insulator (LNOI) platform. The device is fabricated by photolithography assisted chemo-mechanical etching (PLACE), and the pump laser is evanescently coupled into the erbium (Er3+) doped LN microring laser using an undoped LN waveguide mounted above the microring. The quality factor of the LN microring resonator is measured as high as 1.54x10^5 at the wavelength of 1542 nm. Lasing action can be observed at a pump power threshold below 3.5 mW using a 980 nm continuous-wave pump laser. Finally, tuning of the laser wavelength is achieved by varying the electric voltage on the microelectrodes fabricated in the vicinity of microring waveguide, showing an EO coefficient of 0.33 pm/V.

physics.optics↗

arXiv2021

On-chip integrated waveguide amplifiers on Erbium-doped thin film lithium niobate on insulator

We demonstrate on-chip light amplification with integrated optical waveguide fabricated on erbium-doped thin film lithium niobate on insulator (TFLNOI) using the photolithography assisted chemo-mechanical etching (PLACE) technique. A maximum internal net gain of 18 dB in the small-signal-gain regime is measured at the peak emission wavelength of 1530 nm for a waveguide length of 3.6 cm, indicating a differential gain per unit length of 5 dB/cm. This work paves the way to the monolithic integration of diverse active and passive photonic components on the TFLNOI platform.

physics.optics↗

arXiv2020

Facial Pose Estimation by Deep Learning from Label Distributions

Facial pose estimation has gained a lot of attentions in many practical applications, such as human-robot interaction, gaze estimation and driver monitoring. Meanwhile, end-to-end deep learning-based facial pose estimation is becoming more and more popular. However, facial pose estimation suffers from a key challenge: the lack of sufficient training data for many poses, especially for large poses. Inspired by the observation that the faces under close poses look similar, we reformulate the facial pose estimation as a label distribution learning problem, considering each face image as an example associated with a Gaussian label distribution rather than a single label, and construct a convolutional neural network which is trained with a multi-loss function on AFLW dataset and 300W-LP dataset to predict the facial poses directly from color image. Extensive experiments are conducted on several popular benchmarks, including AFLW2000, BIWI, AFLW and AFW, where our approach shows a significant advantage over other state-of-the-art methods.

cs.CV↗

arXiv2020

An on-chip tunable micro-disk laser fabricated on Er3+ doped lithium niobate on insulator (LNOI)

We demonstrate a C-band wavelength-tunable microlaser with an Er3+ doped high quality (~1.02x10^6) lithium niobate microdisk resonator. With a 976 nm continuous-wave pump laser, lasing action can be observed at a pump power threshold as low as ~250 μW at room temperature. Furthermore, the microdisk laser wavelength can be tuned by varying the pump laser power, showing a tuning efficiency of ~-17.03 pm/mW at low pump power blow 13 mW, and 10.58 pm/mW at high pump power above 13 mW.

physics.optics↗

arXiv2020

A spectrally bright wavelength-switchable vacuum ultraviolet source driven by quantum coherence in strong-field-ionized molecules

We report generation of spectrally bright vacuum ultraviolet (VUV) and deep UV (DUV) coherent radiations driven by quantum coherence in tunnel-ionized carbon monoxide (CO) molecules. Our technique allows us to switch between multiple wavelengths provided by the abundant energy levels of molecular ions. The DUV/VUV sources can have arbitrary polarization states by manipulating the pump laser polarization. The superior temporal and spectral properties of the developed source give rise to a broadband Raman comb in the DUV/VUV region.

physics.optics↗

arXiv2019

Extreme nonlinear Raman interaction of an ultrashort nitrogen ion laser with an impulsively excited molecular wavepacket

We report generation of cascaded rotational Raman scattering up to 58th orders in coherently excited CO_2 molecules. The high-order Raman scattering, which produces a quasiperiodic frequency comb with more than 600 sidebands, is obtained using an intense femtosecond laser to impulsively excite rotational coherence and the femtosecond-laser-induced N_2^+ lasing to generate cascaded Raman signals. The novel configuration allows this experiment to be performed with a single femtosecond laser beam at free-space standoff locations. It is revealed that the efficient spectral extension of Raman signals is attributed to the specific spectra-temporal structures of N_2^+ lasing, the ideal spatial overlap of femtosecond laser and N2+ lasing, and the guiding effect of molecular alignment. The Raman spectrum extending above 2000 cm^-1 naturally corresponds to a femtosecond pulse train due to the periodic revivals of molecular rotational wavepackets.

physics.optics↗

arXiv2019

Feature Aggregation Network for Video Face Recognition

This paper aims to learn a compact representation of a video for video face recognition task. We make the following contributions: first, we propose a meta attention-based aggregation scheme which adaptively and fine-grained weighs the feature along each feature dimension among all frames to form a compact and discriminative representation. It makes the best to exploit the valuable or discriminative part of each frame to promote the performance of face recognition, without discarding or despising low quality frames as usual methods do. Second, we build a feature aggregation network comprised of a feature embedding module and a feature aggregation module. The embedding module is a convolutional neural network used to extract a feature vector from a face image, while the aggregation module consists of cascaded two meta attention blocks which adaptively aggregate the feature vectors into a single fixed-length representation. The network can deal with arbitrary number of frames, and is insensitive to frame order. Third, we validate the performance of proposed aggregation scheme. Experiments on publicly available datasets, such as YouTube face dataset and IJB-A dataset, show the effectiveness of our method, and it achieves competitive performances on both the verification and identification protocols.

cs.CV↗

arXiv2019

Video synthesis of human upper body with realistic face

This paper presents a generative adversarial learning-based human upper body video synthesis approach to generate an upper body video of target person that is consistent with the body motion, face expression, and pose of the person in source video. We use upper body keypoints, facial action units and poses as intermediate representations between source video and target video. Instead of directly transferring the source video to the target video, we firstly map the source person's facial action units and poses into the target person's facial landmarks, then combine the normalized upper body keypoints and generated facial landmarks with spatio-temporal smoothing to generate the corresponding target video's image. Experimental results demonstrated the effectiveness of our method.

cs.CV↗

arXiv2019

A Neural Virtual Anchor Synthesizer based on Seq2Seq and GAN Models

This paper presents a novel framework to generate realistic face video of an anchor, who is reading certain news. This task is also known as Virtual Anchor. Given some paragraphs of words, we first utilize a pretrained Word2Vec model to embed each word into a vector; then we utilize a Seq2Seq-based model to translate these word embeddings into action units and head poses of the target anchor; these action units and head poses will be concatenated with facial landmarks as well as the former $n$ synthesized frames, and the concatenation serves as input of a Pix2PixHD-based model to synthesize realistic facial images for the virtual anchor. The experimental results demonstrate our framework is feasible for the synthesis of virtual anchor.

cs.CV↗

arXiv2019

How Old Are You? Face Age Translation with Identity Preservation Using GANs

We present a novel framework to generate images of different age while preserving identity information, which is known as face aging. Different from most recent popular face aging networks utilizing Generative Adversarial Networks(GANs) application, our approach do not simply transfer a young face to an old one. Instead, we employ the edge map as intermediate representations, firstly edge maps of young faces are extracted, a CycleGAN-based network is adopted to transfer them into edge maps of old faces, then another pix2pixHD-based network is adopted to transfer the synthesized edge maps, concatenated with identity information, into old faces. In this way, our method can generate more realistic transfered images, simultaneously ensuring that face identity information be preserved well, and the apparent age of the generated image be accurately appropriate. Experimental results demonstrate that our method is feasible for face age translation.

cs.CV↗