Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2311.14493

Interdigitated Terahertz Metamaterial Sensors: Design with the Dielectric Perturbation Theory

Lei Cao·Fanqi Meng·Esra Özdemir·Yannik Loth·Merle Richter·Anna Katharina Wigger·Maira Pérez Sosa·Alaa Jabbar Jumaah·Shihab Al-Daffaie·Peter Haring Bolívar·Hartmut G. Roskos
View original source ↗Read source document ↗Export metadata ↓

Abstract

Designing terahertz sensors with high sensitivity to detect nanoscale thin films and single biomolecule presents a significant challenge, and addressing these obstacles is crucial for unlocking their full potential in scientific research and advanced applications. This work presents a strategy for the design optimization of metamaterial sensors employed in the detection of small amounts of dielectric materials. The sensors usually utilize the shift of the resonance frequency as an indicator of the presence of the analyte. The amount of shifting depends on intrinsic properties (electric field distribution, quality factor, and mode volume) of the bare cavity, as well as the overlap volume of its high-electric-field zone(s) and the analyte. Guided by the simplified dielectric perturbation theory, interdigitated electric split-ring resonators (ID-eSRR) are devised to significantly enhance the detection sensitivity for thin-film analytes compared to eSRRs without interdigitated fingers in the SRR gap region. The fingers of the ID-eSRR metamaterial sensor redistribute the electric field, creating strongly localized field enhancements that substantially boost the interaction with the analyte. Additionally, the periodic change of the orientation of the inherent anti-phase electric field in the interdigitated structure reduces radiation loss, leading to a higher Q-factor. Experiments with e-beam-fabricated ID-eSRR sensors operating at around 300 GHz demonstrate a remarkable frequency shift of 33.5 GHz upon deposition of a SiO2 layer with a thickness of 150 nm as an analyte simulant. The figure of merit (FOM) improves by over 50 times compared to structures without interdigitated fingers. This rational design option opens a promising avenue for highly sensitive detection of thin films and trace biomolecules.

Explore related subjects

physics.opticsphysics.ins-det

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Lei Cao, Fanqi Meng, Esra Özdemir, Yannik Loth, Merle Richter, Anna Katharina Wigger, Maira Pérez Sosa, Alaa Jabbar Jumaah, Shihab Al-Daffaie, Peter Haring Bolívar, Hartmut G. Roskos. 2023-11-24. Interdigitated Terahertz Metamaterial Sensors: Design with the Dielectric Perturbation Theory. https://doi.org/10.1364/prj.516228

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Two-step high-accuracy microwave frequency measurement and time-frequency analysis based on optical frequency combs

Broadband microwave frequency measurement and time-frequency analysis are crucial for applications such as electronic warfare. However, when it comes to ultra wideband signal analysis, traditional electronic methods have high analysis accuracy, but intrinsic electronic bottlenecks limit their real-time analysis. Here, we propose and experimentally demonstrate a two-step microwave frequency measurement and time-frequency analysis method based on optical frequency combs. The system first performs coarse frequency localization over the 0-40 GHz range using stimulated-Brillouin-scattering-assisted frequency-to-time mapping (FTTM) and dual-comb channelized reception. The dual-comb is then reapplied for downconverting the signal under test, followed by digital signal processing to achieve high-accuracy unambiguous frequency extraction. Experimental results show that the system achieves mean single-tone frequency measurement errors of less than 10 kHz over 0-40 GHz. We further experimentally measure multi-tone, linearly frequency-modulated, and V-shaped frequency-modulated signals, demonstrating the proposed method's capability for analyzing complex signals.

physics.optics↗
arXiv2026

A Two-Mirror Faceted Projection System for EUV Lithography

We propose an all-reflective two-mirror projection system for extreme ultraviolet (EUV) lithography operating at exposure wavelengths of $13.5$~nm (Mo/Si) and $11.2$~nm (Ru/Be), delivering a fourfold ($4\times$) demagnification of the periodic mask pattern at a numerical aperture approaching unity ($\mathrm{NA}_{\max} \approx 0.993$). In contrast to conventional EUV projection objectives that incorporate 6--10 aspheric mirrors with an overall optical throughput of less than $15\%$, the proposed design redirects each accepted discrete spatial diffraction order scattered by the mask onto the wafer via a dedicated pair of planar mirror facets. The number of reflections is strictly fixed at two for all accepted orders, retaining $50$--$60\%$ of the power leaving the mask in each accepted order. We derive a spatial geometry providing rigorous optical path length equalization across all diffraction orders, thereby removing order-dependent propagation phase shifts. Individually optimized 30-bilayer Bragg multilayer coatings are designed for each facet using the transfer matrix method combined with global evolutionary optimization algorithms. The architecture is generalized to a three-dimensional vector formulation with a two-dimensionally periodic mask. Utilizing inverse lithography technology, Fourier parameterization, and a differentiable electromagnetic modal waveguide solver, we solve the synthesis problem for binary absorber masks (La absorber on a Ru/Be/Sr multilayer mirror). We demonstrate simulated aerial images of sub-10-nm features on the wafer (isolated peaks with a full width at half maximum (FWHM) of approximately $5.4$~nm and line pairs with a critical dimension of $6$~nm) and find that the two peaks remain resolved for the tested wafer defocus values from $0$ to $5$~nm along the $z$-axis.

physics.optics↗
arXiv2026

Antimony for broadband nanophotonics across the ultraviolet, visible and infrared

Semimetal elemental antimony (Sb) nanostructures show great potential for applications where nanophotonic properties play a key role, such as phase-change optical memories, non-linear optical elements, photothermal therapy agents, photodetectors and photocatalysts. However, designing advanced Sb-based photonic devices critically requires an accurate and reliable knowledge of the optical response of bulk and nanoscale Sb. Herein, we report for the first time a fully consistent and accurately measured dielectric function for Sb nanoscale films in a wide spectral range from the ultraviolet to the far infrared (4 - 0.04 eV, i.e. ~ 0.3 - 30 $\mu$m), surpassing previous reports that explored a limited spectral range. It is found that the Sb spectral response is driven exclusively by giant interband transitions in the visible up to mid infrared (4 - 0.4 eV, i.e. ~ 0.3 - 3 $\mu$m), and that their contribution dominates over that of free carriers down to 0.12 eV (i.e. ~ 10 $\mu$m). Such spectral response enables Sb nanostructures to display spectrally selective and tunable nanophotonic resonances. First, we showcase interband plasmonic resonances in the visible-to-near infrared for Sb nanogratings. Second, we report giant refractive index dielectric resonances in the mid infrared for nanostructured Sb/dielectric/metal resonant cavities. These findings open a pathway to optimized planar Sb nanoscale designs enabling a tailored light-matter interaction, which will be useful for integrated data, telecom, medical, optoelectronic and energy conversion devices operating in a broad spectral range.

physics.optics↗