Wide-Field X-ray Polarimetry for High Energy Astronomical Transients: First results of the pathfinder CXPD Cubesat Mission

Hong-Bang Liu; Zu-Ke Feng; Huan-Bo Feng; Di-Fan Yi; Li-Rong Xie; Yan-Jun Xie; Zong-Wang Fan; Jin Zhang; Wen-Jin Xie; Xue-Feng Huang; Wei Deng; Fei Xie; Dong Wang; Zi-Li Li; Hui Wang; Ran Chen; Shi-Qiang Zhou; Kai Chen; Jin Li; Qian Liu; Shi Chen; Rui-Ting Ma; Bin-Long Wang; Zhen-Yu Tang; Hang-Zhou Li; Bo Peng; Shu-Lin Liu; Xiang-Ming Sun; Yang-Heng Zheng; En-Wei Liang

arXiv · 2511.13094

Wide-Field X-ray Polarimetry for High Energy Astronomical Transients: First results of the pathfinder CXPD Cubesat Mission

View original source ↗Read source document ↗Export metadata ↓

Abstract

The Low Energy Polarization Detector (LPD) is a key component of the next-generation large-scale Gamma-Ray Burst polarimeter, POLAR-2. It is designed for polarization observations of transient sources in the soft X-ray energy range with a wide field of view (FOV). To validate the key technologies required for wide-FOV X-ray polarization measurements, the Cosmic X-ray Polarization Detector (CXPD) CubeSat was developed as a prototype for the LPD. The CXPD is equipped with two Gas Microchannel Plate Pixel Detectors (GMPDs) that measure X-ray polarization via the photoelectric effect, where ejected photoelectrons produce ionization tracks in the gas which are imaged to reconstruct their emission directions. Laboratory calibrations of the modulation factor and energy spectra were successfully performed using linear polarized X-ray sources at 2.98 keV, 4.51 keV, 6.40 keV, and 8.05 keV. Since its launch in June 2023, the CXPD has successfully completed critical in-orbit technology verification. It has also performed polarization observations of two bright X-ray sources Sco X-1 and the transient Swift J1727.8-1613 yielding constraints on their polarization degrees and angles. Notably, this was the first time that an anti-coincidence detector had been implemented in an X-ray polarimeter, enabling in-orbit verification of the charged-particle background rejection algorithm. These results demonstrate the feasibility of wide-field soft X-ray polarization measurements and provide essential guidance for the development of the LPD for the POLAR-2 mission, thereby advancing the frontier of X-ray polarization astronomy.

Explore related subjects

astro-ph.IM

Keep this discovery

BibTeX RIS

Hong-Bang Liu, Zu-Ke Feng, Huan-Bo Feng, Di-Fan Yi, Li-Rong Xie, Yan-Jun Xie, Zong-Wang Fan, Jin Zhang, Wen-Jin Xie, Xue-Feng Huang, Wei Deng, Fei Xie, Dong Wang, Zi-Li Li, Hui Wang, Ran Chen, Shi-Qiang Zhou, Kai Chen, Jin Li, Qian Liu, Shi Chen, Rui-Ting Ma, Bin-Long Wang, Zhen-Yu Tang, Hang-Zhou Li, Bo Peng, Shu-Lin Liu, Xiang-Ming Sun, Yang-Heng Zheng, En-Wei Liang. 2025-11-17. Wide-Field X-ray Polarimetry for High Energy Astronomical Transients: First results of the pathfinder CXPD Cubesat Mission. https://arxiv.org/abs/2511.13094

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

The EDD Radio Astronomy Backend Framework

Modern digital radio astronomy receivers produce increasingly wide-bandwidth, high bit-rate data streams that necessitate the development of flexible, scalable, and maintainable backend processing and recording systems. Historically, such backend instrumentation has been tightly coupled to telescope observing modes, limiting reuse between observatories and science cases. We present the Effelsberg Direct Digitisation (EDD) backend framework, a software-defined architecture for constructing real-time radio astronomy backends on commodity off-the-shelf computing infrastructure. We describe its design, implementation, supported observing modes, and operational deployments. EDD separates a common core framework from plugin-provided observing capabilities. The core provides orchestration, telescope interfaces, pipeline lifecycle management, monitoring, and deployment tooling, while plugins implement processing pipelines for specific observing modes. The framework is designed to support both single-dish and interferometric instruments through site-specific configuration and plugin selection. EDD currently supports spectroscopy and spectropolarimetry, pulsar timing and searching, baseband recording, very long baseline interferometry, correlation, and beamforming. Operational deployments include the Effelsberg 100-m telescope, the SKA-MPI prototype dish, the Thai National Radio Telescope, and the ARGOS interferometric prototype array. By separating common services, observing-mode plugins, and site-specific configuration, it allows backend capabilities to be deployed across heterogeneous telescope environments and provides a community resource for broadband radio astronomy instrumentation.

astro-ph.IM↗

arXiv2026

Bayesian Superiority in On/Off analysis

We present a detailed comparison of Bayesian criteria with three non-informative priors - flat, Jeffreys, and scale-invariant - for testing a signal against an unknown background and compare them with the classical frequentist Li-Ma approach in the On/Off problem. We perform Monte Carlo simulations for various background levels and evaluate the Li-Ma and Bayesian criteria by their Type I error rates. We then simulate a nonzero signal and compare the criteria in terms of Type II error rates. We find that the Bayesian criterion with the Jeffreys prior yields lower Type I and Type II error rates than the Li-Ma criterion. In addition, we show that the Bayesian criteria are more robust than the Li-Ma criterion when the background distribution is overdispersed relative to the Poisson distribution.

astro-ph.IM↗

arXiv2026

An RFSoC-based Backend and Timing System for the Balloon-borne Very Long Baseline Interferometry Experiment

We present the design and performance characterization of the digital backend and precision-timing system for the Balloon-borne Very Long Baseline Interferometry Experiment (BVEX), a pathfinder for high-frequency stratospheric VLBI at 22 GHz. The backend uses one of the four 14-bit analog-to-digital converter inputs on an AMD-Xilinx RFSoC 4x2. Although the converters support sampling rates up to 5 GSPS, the flight configuration digitizes the 2-4 GHz intermediate frequency at 4.096 GSPS. CASPER firmware provides both a high-resolution spectrometer for pointing and receiver verification, and a VLBI acquisition chain with two-bit requantization that records at a rate of about 8.2 Gbps. The timestamped data packets are sent over 100 Gigabit Ethernet (GbE) to a 16 TB NVMe array in a storage computer that draws approximately 70-80 W. The timing chain uses a Rakon oven-controlled crystal oscillator as a timing reference while a time-interval counter measures its drift relative to a GPS reference with approximately 60 ps resolution. This is the first deployment of an RFSoC-based VLBI backend and precision-timing system on a stratospheric balloon. Ground tests validated the backend, spectrometer, and timing chain. The August 2025 CSA STRATOS flight ended before reaching the target float altitude because of a balloon failure, and as a result no science observations were obtained. For the planned 2027 reflight, we are developing a conduction-cooled data storage computer with 24 TB of NVMe capacity and a direct data path from the 100 GbE interface to the NVMe array.

astro-ph.IM↗