Grafted Low-Leakage Si/AlN p-n Diodes Enabled by Fluorinated AlN Interface

Abstract

Ultrawide-bandgap AlN is a promising material for next-generation power electronics; however, its practical implementation is hindered by unstable surface chemistry and the high activation energy of p-type dopants. In particular, high-temperature rapid thermal annealing (RTA), required for forming low-resistance contacts on n-type AlN, leads to the formation of thick and defective surface oxides that degrade heterojunction performance. In this work, we present an interface engineering approach based on fluorination-induced AlFx formation combined with SiNx passivation to suppress defect-assisted leakage in p-Si/n-AlN heterojunction diodes fabricated via semiconductor grafting. A low-damage pseudo-atomic layer etching process is employed to remove RTA-induced oxides and restore a near-stoichiometric AlN surface. Subsequent XeF2 treatment forms an ultrathin AlFx layer, which is stabilized by an atomic-layer-deposited SiNx capping layer prior to p-Si nanomembrane integration. Electrical measurements show that the engineered AlFx/SiNx interface reduces reverse leakage current by several orders of magnitude compared to untreated or oxide-removed AlN surfaces, while preserving forward conduction characteristics. Temperature-dependent analysis indicates strong suppression of Poole-Frenkel emission and a shift of leakage onset to higher reverse bias, ultimately limited by bulk AlN crystal quality. X-ray photoelectron spectroscopy and transmission electron microscopy confirm the formation of Al-F bonds, reduced Al-O content, and the presence of a thin interfacial SiOx/SiON layer. These results establish AlFx/SiNx passivation as an effective strategy for stabilizing AlN interfaces and enabling low-leakage ultrawide-bandgap heterojunction devices.