Design and Characterization of Racetrack 3D-Trench Silicon Sensor Based on 8-Inch Process with Excellent Time Resolution

Abstract

In the extreme environments of high-luminosity colliders, traditional planar silicon sensors suffer severe radiation-induced performance degradation and fail to satisfy the stringent demands of high-precision tracking and high-speed timing in particle physics. 3D silicon sensors enhance radiation hardness by shortening charge collection distance, yet conventional designs with columnar or square-cell trench electrodes exhibit non-uniform electric fields, including saddle points and low-field regions, which degrade charge collection efficiency and timing resolution. This work presents a novel racetrack 3D-trench silicon sensor with continuous racetrack electrodes surrounding a long central collection electrode, aiming to eliminate electric field inhomogeneities. For the first time, a 23 $\mu $m shallow-etched device was fabricated on an 8-inch platform, which provides a promising basis for its subsequent mass production and engineering applications. The device performance was systematically evaluated through theoretical analysis, 3D TCAD simulations, and characterization using semiconductor parameter analyzers and transient current technique (TCT) measurements. The sensor achieves leakage current below 0.2 nA, breakdown voltage above 110 V, full depletion voltage as low as a few volts, capacitance as low as 650 fF, collected charge of 4 fC, time response of about 640 ps, and time resolution of 50 ps. This large-scale manufacturable, shallow-etched racetrack 3D-trench silicon sensor provides a competitive device solution for portable radiation detection and next-generation 4D tracking under high-radiation and high-event-rate conditions.