arXiv subjects

A. T. Charlie Johnson

Publications and source records attributed to A. T. Charlie Johnson.

At least 19 recordsLinked to original sources

arXiv2025

High-density and scalable graphene Hall sensor arrays through monolithic CMOS integration

Electronic devices made from two-dimensional materials (2DMs) significantly outperform their silicon counterparts; however, silicon CMOS technology remains commercially predominant as it offers the capability to operate dense arrays of devices in a scalable fashion. In particular, graphene Hall sensors (GHSs) offer great improvements in magnetic field sensitivity and resolution compared to silicon Hall-effect sensors, making them extremely appealing for magnetic field imaging and biosensing. At present, GHS arrays have limited scalability compared to silicon CMOS since they require planar routing for biasing and multiplexing. In this work, we explore strategies to realize high-density graphene Hall sensor arrays by vertically connecting GHSs with silicon CMOS biasing and multiplexing circuitry, allowing the routing and circuitry to scale with the array. We investigate the importance of design choices in the chip layout and post-fabrication process in maximizing the reliability of graphene transfer onto mm-scale CMOS dies. Our experimental results validate the success of the integration process by showing for the first time that GHSs can be monolithically integrated with CMOS with high yield to form sensor arrays. We expect that these results will lead to further improvements in magnetic sensing technology and broader advancements in large-scale heterogeneous 2DM-CMOS systems.

physics.ins-det↗

arXiv2024

Klein Tunneling of Gigahertz Elastic Waves in Nanoelectromechanical Metamaterials

Klein tunneling, the perfect transmission of a normally incident relativistic particle through an energy barrier, has been tested in various electronic, photonic, and phononic systems. Its potential in guiding and filtering classical waves in the Ultra High Frequency regime, on the other hand, has not been explored. Here, we report the realization of acoustic Klein tunneling in a nanoelectromechanical metamaterial system operating at gigahertz frequencies. The piezoelectric potential profiles are obtained by transmission-mode microwave impedance microscopy, from which reciprocal-space maps can be extracted. The transmission rate of normally incident elastic waves is near unity in the Klein tunneling regime and drops significantly outside this frequency range, consistent with microwave network analysis. Strong angular dependent transmission is also observed by controlling the launching angle of the emitter interdigital transducer. This work broadens the horizon in exploiting high-energy-physics phenomena for practical circuit applications in both classical and quantum regimes.

physics.app-ph↗

arXiv2024

Electrically Tunable Magnetoconductance of Close-Packed CVD Bilayer Graphene Layer Stacking Walls

Quantum valley Hall (QVH) domain wall states are a new class of one-dimensional (1D) one-way conductors that are topologically protected in the absence of valley mixing. Development beyond a single QVH channel raises important new questions as to how QVH channels in close spatial proximity interact with each other, and how that interaction may be controlled. Scalable epitaxial bilayer graphene synthesis produces layer stacking wall (LSW) bundles, where QVH channels are bound, providing an excellent platform to study QVH channel interactions. Here we show that distinct strain sources lead to the formation of both well-separated LSWs and close packed LSW bundles. Comparative studies of electronic transport in these two regimes reveal that close-packed LSW bundles support electrically tunable magnetoconductance. The coexistence of different strain sources offers a potential pathway to realize scalable quantum transport platform based on LSWs where electrically tunability enables programmable functionality.

cond-mat.mes-hall↗

arXiv2022

Observation of Gigahertz Topological Valley Hall Effect in Nanoelectromechanical Phononic Crystals

Topological phononics offers numerous opportunities in manipulating elastic waves that can propagate in solids without being backscattered. Due to the lack of nanoscale imaging tools that aid the system design, however, acoustic topological metamaterials have been mostly demonstrated in macroscale systems operating at low (kilohertz to megahertz) frequencies. Here, we report the realization of gigahertz topological valley Hall effect in nanoelectromechanical AlN membranes. Propagation of elastic wave through phononic crystals is directly visualized by microwave microscopy with unprecedented sensitivity and spatial resolution. The valley Hall edge states, protected by band topology, are vividly seen in both real- and momentum-space. The robust valley-polarized transport is evident from the wave transmission across local disorder and around sharp corners, as well as the power distribution into multiple edge channels. Our work paves the way to exploit topological physics in integrated acousto-electronic systems for classical and quantum information processing in the microwave regime.

cond-mat.mes-hall↗

arXiv2020

Phase Transition in a Memristive Suspended MoS2 Monolayer Probed by Opto- and Electro-Mechanics

Semiconducting monolayer of 2D material are able to concatenate multiple interesting properties into a single component. Here, by combining opto-mechanical and electronic measurements, we demonstrate the presence of a partial 2H-1T phase transition in a suspended 2D monolayer membrane of MoS2. Electronic transport shows unexpected memristive properties in the MoS2 membrane, in the absence of any external dopants. A strong mechanical softening of the membrane is measured concurrently and may only be related to the phase 2H-1T phase transition which imposes a 3percent directional elongation of the topological 1T phase with respect to the semiconducting 2H. We note that only a few percent 2H- 1T phase switching is sufficient to observe measurable memristive effects. Our experimental results combined with First-principles total energy calculations indicate that sulfur vacancy diffusion plays a key role in the initial nucleation of the phase transition. Our study clearly shows that nanomechanics represents an ultrasensitive technique to probe the crystal phase transition in 2D materials or thin membranes. Finally, a better control of the microscopic mechanisms responsible for the observed memristive effect in MoS2 is important for the implementation of future devices.

cond-mat.mes-hall↗

arXiv2017

Scalable Graphene Aptasensors for Drug Quantification

Simpler and more rapid approaches for therapeutic drug-level monitoring are highly desirable to enable use at the point-of-care. We have developed an all-electronic approach for detection of the HIV drug tenofovir based on scalable fabrication of arrays of graphene field-effect transistors (GFETs) functionalized with a commercially available DNA aptamer. The shift in the Dirac voltage of the GFETs varied systematically with the concentration of tenofovir in deionized water, with a detection limit less than 1 ng/mL. Tests against a set of negative controls confirmed the specificity of the sensor response. This approach offers the potential for further development into a rapid and convenient point-of-care tool with clinically relevant performance.

physics.app-ph↗

arXiv2017

pH sensing properties of flexible, bias-free graphene microelectrodes in complex fluids: from phosphate buffer solution to human serum

Advances in techniques for monitoring pH in complex fluids could have significant impact on analytical and biomedical applications ranging from water quality assessment to in vivo diagnostics. We developed flexible graphene microelectrodes (GEs) for rapid (< 5 seconds), very low power (femtowatt) detection of the pH of complex biofluids. The method is based on real-time measurement of Faradaic charge transfer between the GE and a solution at zero electrical bias. For an idealized sample of phosphate buffer solution (PBS), the Faradaic current varied monotonically and systematically with the pH with resolution of ~0.2 pH unit. The current-pH dependence was well described by a hybrid analytical-computational model where the electric double layer derives from an intrinsic, pH-independent (positive) charge associated with the graphene-water interface and ionizable (negative) charged groups described by the Langmuir-Freundlich adsorption isotherm. We also tested the GEs in more complex bio-solutions. In the case of a ferritin solution, the relative Faradaic current, defined as the difference between the measured current response and a baseline response due to PBS, showed a strong signal associated with the disassembly of the ferritin and the release of ferric ions at pH ~ 2.0. For samples of human serum, the Faradaic current showed a reproducible rapid (<20s) response to pH. By combining the Faradaic current and real time current variation, the methodology is potentially suitable for use to detect tumor-induced changes in extracellular pH.

physics.bio-ph↗

arXiv2017

Quantifying the effect of ionic screening with protein-decorated graphene transistors

Liquid-based applications of biomolecule-decorated field-effect transistors (FETs) range from biosensors to in vivo implants. A critical scientific challenge is to develop a quantitative understanding of the gating effect of charged biomolecules in ionic solution and how this influences the readout of the FETs. To address this issue, we fabricated protein-decorated graphene FETs and measured their electrical properties, specifically the shift in Dirac voltage, in solutions of varying ionic strength. We found excellent quantitative agreement with a model that accounts for both the graphene polarization charge and ionic screening of ions adsorbed on the graphene as well as charged amino acids associated with the immobilized protein. The technique and analysis presented here directly couple the charging status of bound biomolecules to readout of liquid-phase FETs fabricated with graphene or other two-dimensional materials.

cond-mat.mes-hall↗

arXiv2017

Scalable production of high sensitivity, label-free DNA biosensors based on back-gated graphene field-effect transistors

Scalable production of all-electronic DNA biosensors with high sensitivity and selectivity is a critical enabling step for research and applications associated with detection of DNA hybridization. We have developed a scalable and very reproducible (> 90% yield) fabrication process for label-free DNA biosensors based upon graphene field effect transistors (GFETs) functionalized with single-stranded probe DNA. The shift of the GFET sensor Dirac point voltage varied systematically with the concentration of target DNA. The biosensors demonstrated a broad analytical range and limit of detection of 1 fM for 60-mer DNA oligonucleotide. In control experiments with mismatched DNA oligomers, the impact of the mismatch position on the DNA hybridization strength was confirmed. This class of highly sensitive DNA biosensors offers the prospect of detection of DNA hybridization and sequencing in a rapid, inexpensive, and accurate way.

physics.app-ph↗

arXiv2017

Structural-Functional Analysis of Engineered Protein-Nanoparticle Assemblies Using Graphene Microelectrodes

The characterization of protein-nanoparticle assemblies in solution remains a challenge. We demonstrate a technique based on a graphene microelectrode for structural-functional analysis of model systems composed of nanoparticles enclosed in open-pore and closed-pore ferritin molecules. The method readily resolves the difference in accessibility of the enclosed nanoparticle for charge transfer and offers the prospect for quantitative analysis of pore-mediated transport shed light on the spatial orientation of the protein subunits on the nanoparticle surface, faster and with higher sensitivity than conventional catalysis methods.

physics.bio-ph↗

arXiv2017

Quantifying the intrinsic surface charge density and charge-transfer resistance of the graphene-solution interface through bias-free low-level charge measurement

Liquid-based bio-applications of graphene require a quantitative understanding of the graphene-liquid interface, with the surface charge density of adsorbed ions, the interfacial charge transfer resistance, and the interfacial charge noise being of particular importance. We quantified these properties through measurements of the zero-bias Faradaic charge-transfer between graphene electrodes and aqueous solutions of varying ionic strength using a reproducible, low-noise, minimally perturbative charge measurement technique. The measurements indicated that adsorbed ions had a negative surface charge density of approximately -32.8 mC m-2 and that the specific charge transfer resistance was 6.5pm0.3 M$Ω$ cm2. The normalized current noise power spectral density for all ionic concentrations tested collapsed onto a 1/f characteristic with $α$=1.1pm0.2. All the results are in excellent agreement with predictions of the theory for the graphene-solution interface. This minimally-perturbative method for monitoring charge-transfer at the sub-pC scale exhibits low noise and ultra-low power consumption (~ fW), making it well-suited for use in low-level bioelectronics in liquid environments.

cond-mat.mes-hall↗

arXiv2017

An aptamer-biosensor for azole class antifungal drugs

This report describes the development of an aptamer for sensing azole antifungal drugs for therapeutic drug monitoring. Modified Synthetic Evolution of Ligands through Exponential Enrichment (SELEX) was used to discover a DNA aptamer recognizing azole class antifungal drugs. This aptamer undergoes a secondary structural change upon binding to its target molecule as shown through fluorescence anisotropy-based binding measurements. Experiments using circular dichroism spectroscopy, revealed a unique double G-quadruplex structure that was essential and specific for binding to the azole antifungal target. Aptamer-functionalized Graphene Field Effect Transistor (GFET) devices were created and used to measure the binding of strength of azole antifungals to this surface. In total this aptamer and the supporting sensing platform could provide a valuable tool for improving the treatment of patients with invasive fungal infections.

physics.bio-ph↗

arXiv2017

Understanding the different exciton-plasmon coupling regimes in two-dimensional semiconductors coupled with plasmonic lattices: a combined experimental and unified equations of motion approach

We study exciton-plasmon coupling in two-dimensional semiconductors coupled with Ag plasmonic lattices via angle-resolved reflectance spectroscopy and by solving the equations of motion (EOMs) in a coupled oscillator model accounting for all the resonances of the system. Five resonances are considered in the EOM model: semiconductor A and B excitons, localized surface plasmon resonances (LSPRs) of plasmonic nanostructures and the lattice diffraction modes of the plasmonic array. We investigated the exciton-plasmon coupling in different 2D semiconductors and plasmonic lattice geometries, including monolayer MoS2 and WS2 coupled with Ag nanodisk and bowtie arrays, and examined the dispersion and lineshape evolution in the coupled systems via the EOM model with different exciton-plasmon coupling parameters. The EOM approach provides a unified description of the exciton-plasmon interaction in the weak, intermediate and strong coupling cases with correctly explaining the dispersion and lineshapes of the complex system. This study provides a much deeper understanding of light-matter interactions in multilevel systems in general and will be useful to instruct the design of novel two-dimensional exciton-plasmonic devices for a variety of optoelectronic applications with precisely tailored responses.

cond-mat.mtrl-sci↗

arXiv2016

Intrinsic Phonon Bands in High-Quality Monolayer T' Molybdenum Ditelluride

The topologically nontrivial and chemically functional distorted octahedral (T') transition metal dichalcogenides (TMDCs) are a type of layered semimetal that has attracted significant recent attention. However, the properties of monolayer (1L) T'-TMDC, a fundamental unit of the system, is still largely unknown due to rapid sample degradation in air. Here we report that well-protected 1L CVD T'-MoTe2 exhibits sharp and robust intrinsic Raman bands, with intensities about one order of magnitude stronger than those from bulk T'-MoTe2. The high-quality samples enabled us to reveal the set of all nine even-parity zone-center optical phonons, providing reliable fingerprints for the previously elusive crystal. By performing light polarization and crystal orientation resolved scattering analysis, we can effectively distinguish the intrinsic modes from Te-metalloid-like modes A (~122 cm-1) and B (~141 cm-1) which are related to the sample degradation. Our studies offer a powerful non-destructive method for assessing sample quality and for monitoring sample degradation in situ, representing a solid advance in understanding the fundamental properties of 1L-T'-TMDCs.

cond-mat.mtrl-sci↗

arXiv2016

Electrical tuning of exciton-plasmon polariton coupling in monolayer MoS2 integrated with plasmonic nanoantenna lattice

Active control of light-matter interactions in semiconductors is critical for realizing next generation optoelectronic devices, with tunable control of the systems optical properties via external fields. The ability to manipulate optical interactions in active materials coupled to cavities via geometrical parameters, which are fixed along with dynamic control with applied fields opens up possibilities of controlling exciton lifetimes, oscillator strengths and their relaxation properties. Here, we demonstrate electrical control of exciton-plasmon polariton coupling strength of a two-dimensional semiconductor integrated with plasmonic nanoresonators assembled in a field-effect transistor device between strong and weak coupling limits by electrostatic doping. As a result, the exciton-plasmon polarion dispersion can be altered dynamically with applied electric field by modulating the excitonic properties of monolayer MoS2 arising from many-body effects with carrier concentration. In addition, strong coupling between charged excitons plasmons was also observed upon increased carrier injection. The ability to dynamically control the optical properties of an ultra-thin semiconductor with plasmonic nanoresonators and electric fields demonstrates the versatility of the coupled system and offers a new platform for the design of optoelectronic devices with precisely tailored responses.

cond-mat.mtrl-sci↗

arXiv2015

Strong exciton-plasmon coupling in MoS2 coupled with plasmonic lattice

We demonstrate strong exciton-plasmon coupling in silver nanodisk arrays integrated with monolayer MoS2 via angle-resolved reflectance microscopy spectra of the coupled system. Strong exciton-plasmon coupling is observed with the exciton-plasmon coupling strength up to 58 meV at 77 K, which also survives at room temperature. The strong coupling involves three types of resonances: MoS2 excitons, localized surface plasmon resonances (LSPRs) of individual silver nanodisks and plasmonic lattice resonances of the nanodisk array. We show that the exciton-plasmon coupling strength, polariton composition and dispersion can be effectively engineered by tuning the geometry of the plasmonic lattice, which makes the system promising for realizing novel two-dimensional plasmonic polaritonic devices.

cond-mat.mtrl-sci↗

arXiv2015

Fano resonance and spectrally modified photoluminescence enhancement in monolayer MoS2 integrated with plasmonic nanoantenna array

The manipulation of light-matter interactions in two-dimensional atomically thin crystals is critical for obtaining new optoelectronic functionalities in these strongly confined materials. Here, by integrating chemically grown monolayers of MoS2 with a silver-bowtie nanoantenna array supporting narrow surface-lattice plasmonic resonances, a unique two-dimensional optical system has been achieved. The enhanced exciton-plasmon coupling enables profound changes in the emission and excitation processes leading to spectrally tunable, large photoluminescence enhancement as well as surface-enhanced Raman scattering at room temperature. Furthermore, at low temperatures, due to the decreased damping of MoS2 excitons interacting with the plasmonic resonances of the bowtie array, stronger exciton-plasmon coupling is achieved resulting in a Fano lineshape in the reflection spectrum. The Fano lineshape, which is due to the interference between the pathways involving the excitation of the exciton and plasmon, can be tuned by altering the coupling strengths between the two systems via changing the design of the bowties lattice. The ability to manipulate the optical properties of two-dimensional systems with tunable plasmonic resonators offers a new platform for the design of novel optical devices with precisely tailored responses.

cond-mat.mtrl-sci↗

arXiv2014

Scalable Production of Highly-Sensitive Nanosensors Based on Graphene Functionalized with a Designed G Protein-Coupled Receptor

We have developed a novel, all-electronic biosensor for opioids that consists of an engineered mu opioid receptor protein, with high binding affinity for opioids, chemically bonded to a graphene field-effect transistor to read out ligand binding. A variant of the receptor protein that provided chemical recognition was computationally redesigned to enhance its solubility and stability in an aqueous environment. A shadow mask process was developed to fabricate arrays of hundreds of graphene transistors with average mobility of ~1500 cm2 V-1 s-1 and yield exceeding 98%. The biosensor exhibits high sensitivity and selectivity for the target naltrexone, an opioid receptor antagonist, with a detection limit of 10 pg/mL.

cond-mat.mtrl-sci↗