arXiv subjects

Alessandro Pitanti

Publications and source records attributed to Alessandro Pitanti.

At least 19 recordsLinked to original sources

arXiv2026

Arduino based interferometer stabilizer equipped with a digital lock-in amplifier

Interferometric sensors are ubiquitous in precision metrology, yet their performance is fundamentally limited by environmental noise and thermal drift. To achieve maximum sensitivity, these systems must be actively stabilized at the quadrature point of the interference fringe. Commercial stabilization solutions, typically based on analog lock-in amplifiers or FPGA architectures, are often prohibitively expensive and do not not offer the flexibility needed for custom experimental setups. In this work, we present an open-source, compact and low-cost digital stabilization system built upon the dual-core Arduino Giga R1 microcontroller. The system features a custom analog front-end with programmable gain amplifiers (PGAs) and active signal conditioning, enabling direct integration with standard amplified photodiodes. We implement a firmware-based digital lock-in amplifier running at a 100 kHz sampling rate, which performs real-time demodulation and PID feedback control without the latency bottlenecks of PC-based loops. Experimental characterization demonstrates that the system effectively suppresses long-term thermal drift and actively rejects external perturbations. The resulting device provides a standalone, Arduino-based alternative for laser frequency stabilization and interferometric control in educational and research laboratories.

physics.optics↗

arXiv2025

Coherent absorption reveals colors hidden in a grey Fabry-Pérot cavity

Thin dielectric films are known to show distinct colors, responsible for the iridescence of various natural and artificial objects such as insect wings and soap bubbles. In the present article we show that a specialized thin film Fabry-Pérot resonator, that we name conductor-dielectric-conductor (CDC) matched cavity, appears instead completely grey when observed under ordinary conditions (i.e. by analyzing the transmitted or reflected incoherent white light). Nonetheless, the matched CDC cavity still retains spectral information, that clearly appear when the cavity is analyzed by the coherent absorption technique. The CDC system is simply a dielectric thin film sandwiched by two conducting interfaces, whose conductivity shall be appropriately matched depending upon the dielectric refractive index. In practical applications, the ideal conducting interfaces can be safely replaced by thin metal films, making the system easily applicable in particular for cryptographic purposes. We indeed demonstrated experimentally that a visually recognizable thin-film color pattern can be concealed to an ordinary observer, and finally recovered through a dedicated coherent absorption decoding apparatus.

physics.optics↗

arXiv2025

Bridging mid and near infrared by combining optomechanics and self mixing

This work describes a self-mixing-assisted optomechanical platform for transferring information between near- and mid-infrared radiation. In particular, the self-mixing signal of a mid-infrared quantum cascade laser is used to detect the oscillation of a membrane driven by light-induced forces exerted by a near-infrared excitation beam, which is amplitude-modulated at the membrane resonance frequency. This technique benefits from spectral broadness and, therefore, can link different spectral regions from both the excitation and probe sides. This versatility can pave the way for future applications of this self-mixing-assisted optomechanical platform in communication and advanced sensing systems.

physics.optics↗

arXiv2024

Acousto-optic modulated vortex beam with tunable topological charge

Controlling the symmetry of optical and mechanical waves is pivotal to their full exploitation in technological applications and topology-linked fundamental physics experiments. Leveraging on the control of orbital angular momentum, we introduce here a device forming super-high-frequency-modulated optical vortex beams via acousto-optic interaction of light with acoustic vortices. Originated by shape-engineering of a single-contact bulk acoustic wave resonator, we generate vortices in a wide band of frequencies around 4 GHz and with frequency/geometrically tunable topological charge from 1 to 13 and beyond. With all electrical control and on-chip integration our device offers new solutions for angular-momentum-based light communication, three-dimensional particle manipulation, as well as novel interaction schemes for optomechanical devices.

physics.optics↗

arXiv2023

Gigahertz modulation of a fully dielectric nonlocal metasurface

Nonlocal metasurfaces are currently emerging as advanced tools for the manipulation of electromagnetic radiation, going beyond the widely explored Huygens metasurface concept. Nonetheless, the lack of an unified approach for their fast and efficient tunability still represents a serious challenge to overcome. In this article we report on gigahertz modulation of a dielectric slab-based, nonlocal (i.e. angle-dispersive) metasurface, whose operation relies on the optomechanical coupling with a mechanical wave excited piezoelectrically by a transducer integrated on the same chip. Importantly, the metasurface region is free from any conductive material, thus eliminating optical losses, and making our device of potential interest for delicate environments such as high-power apparatuses or quantum optical systems.

physics.optics↗

arXiv2022

Strain-engineered wrinkles on graphene using polymeric actuators

The electronic and optical properties of graphene can be precisely tuned by generating deterministic arrangements of strain features. In this paper, we report the formation of widespread and controlled buckling delamination of monolayer graphene deposited on hexagonal boron-nitride promoted by a significant squeezing of the graphene flake and induced by polymeric micro-actuators. The flexibility of this method offers a promising technique to create arbitrary buckling geometries and arrays of wrinkles which could also be subjected to iterative folding-unfolding cycles. Further development of this method could pave the way to tune the properties of several kinds of other two-dimensional materials, such as transition metal dichalcogenides, by tailoring their surface topography.

cond-mat.mtrl-sci↗

arXiv2022

Unexpected Electron Transport Suppression in a Heterostructures Graphene MoS2 Multiple Field-Effect Transistor Architecture

We demonstrate a graphene-MoS2 architecture integrating multiple field-effect transistors and we independently probe and correlate the conducting properties of van der Waals coupled graphene-MoS2 contacts with the ones of the MoS2 channels. Devices are fabricated starting from high-quality single-crystal monolayers grown by chemical vapor deposition and characterized by scanning Raman and photoluminescence spectroscopies. Transconductance curves of MoS2 are compared with the current-voltage characteristics of graphene contact stripes, revealing a significant suppression of transport on the n-side of the transconductance curve. Based on ab-initio modeling, the effect is understood in terms of trapping by sulfur vacancies, which counter-intuitively depends on the field-effect, even though the graphene contact layer is positioned between the backgate and the MoS2 channel.

cond-mat.mes-hall↗

arXiv2021

Micromechanical bolometers for sub-Terahertz detection at room temperature

Fast, room temperature imaging at THz and sub-THz frequencies is an interesting feature which could unleash the full potential of plenty applications in security, healthcare and industrial production. In this Letter we introduce micromechanical bolometers based on silicon nitride trampoline membranes as broad-range detectors, down to the sub-THz frequencies. They show, at the largest wavelengths, room-temperature noise-equivalent-powers comparable to state-of-the-art commercial devices (~100 pW Hz-1/2); adding the good operation speed and the easy, large-scale fabrication process, the trampoline membrane could be the next candidate for cheap, room temperature THz imaging and related applications.

physics.ins-det↗

arXiv2021

Electron localization in periodically strained graphene

Pseudo-magnetic field (PMF) in deformed graphene has been proposed as a promising and flexible method to quantum-confine electronic states and create gaps in the local density of states. Motivated by this perspective, we numerically analyze various different configurations leading to electronic localization and band flattening in periodically strained graphene. In particular, we highlight the existence of a fine structure in the pseudo-Landau levels confined in large-PMF regions, the emergence of states confined to PMF nodes as well as of snake-like orbits. In our paper, we further analyze the importance of the relative rotation and asymmetry of the strain lattice with respect to the atomic lattice and show how it can be used to modulate the PMF periodicity and to create localized orbits far from the strain points. Possible implementations and applications of the simulated structures are discussed.

cond-mat.mes-hall↗

arXiv2020

Injection locking in an optomechanical coherent phonon source

Spontaneous locking of the phase of a coherent phonon source to an external reference is demonstrated in an optomechanical oscillator based on a self-triggered free-carrier/temperature limit cycle. Synchronization is observed when the pump laser driving the mechanical oscillator to a self-sustained state is modulated by a radiofrequency tone. We employ a pump-probe phonon detection scheme based on an independent optical cavity to observe only the mechanical oscillator dynamics. The lock range of the oscillation frequency, i.e., the Arnold tongue, is experimentally determined over a range of external reference strengths, evidencing the possibility to tune the oscillator frequency for a range up to 350 kHz. The stability of the coherent phonon source is evaluated via its phase noise, with a maximum achieved suppression of 44 dBc/Hz at 1kHz offset for a 100 MHz mechanical resonator. Introducing a weak modulation in the excitation laser reveals as a further knob to trigger, control and stabilise the dynamical solutions of self-pulsing based optomechanical oscillators, thus enhancing their potential as acoustic wave sources in a single layer silicon platform.

physics.optics↗

arXiv2020

Stress-strain in electron-beam activated polymeric micro-actuators

Actuation of thin polymeric films via electron irradiation is a promising avenue to realize devices based on strain engineered two dimensional (2D) materials. Complex strain profiles demand a deep understanding of the mechanics of the polymeric layer under electron irradiation; in this article we report a detailed investigation on electron-induced stress on poly-methyl-methacrylate (PMMA) thin film material. After an assessment of stress values using a method based on dielectric cantilevers, we directly investigate the lateral shrinkage of PMMA patterns on epitaxial graphene, which reveals a universal behavior, independent of the electron acceleration energy. By knowing the stress-strain curve, we finally estimate an effective Young's modulus of PMMA on top of graphene which is a relevant parameter for PMMA based electron-beam lithography and strain engineering applications.

cond-mat.mes-hall↗

arXiv2019

Local tuning of WS2 photoluminescence using polymeric micro-actuators in a monolithic van der Waals heterostructure

The control of the local strain profile in 2D materials offers an invaluable tool for tailoring the electronic and photonic properties of solid-state devices. In this paper, we demonstrate a local engineering of the exciton photoluminescence (PL) energy of monolayer tungsten disulfide (WS2) by means of strain. We apply a local uniaxial stress to WS2 by exploiting electron-beam patterned and actuated polymeric micrometric artificial muscles (MAMs), which we implement onto monolithic synthetic WS2/graphene heterostructures. We show that MAMs are able to induce an in-plane stress to the top WS2 layer of the van der Waals heterostructure and that the latter can slide on the graphene underneath with negligible friction. As a proof of concept for the local strain-induced PL shift experiments, we exploit a two-MAM configuration in order to apply uniaxial tensile stress on well-defined micrometric regions of WS2. Remarkably, our architecture does not require the adoption of fragile suspended microstructures. We observe a spatial modulation of the excitonic PL energy of the WS2 monolayers under stress, which agrees with the expected strain profile and attains a maximum redshift of about 40 meV at the maximum strain intensity point. After the actuation, a time-dependent PL blueshift is observed in agreement with the viscoelastic properties of the polymeric MAMs. Our approach enables inducing local and arbitrary deformation profiles and circumvents some key limitations and technical challenges of alternative strain engineering methods requiring the 2D material transfer and production of suspended membranes.

cond-mat.mes-hall↗

arXiv2019

Photonic bands, superchirality, and inverse design of a chiral minimal metasurface

Photonic band structures are a typical fingerprint of periodic optical structures, and are usually observed in spectroscopic quantities such as transmission, reflection and absorption. Here we show that also the chiro-optical response of a metasurface constituted by a lattice of non-centrosymmetric, L-shaped holes in a dielectric slab shows a band structure, where intrinsic and extrinsic chirality effects are clearly recognized and connected to localized and delocalized resonances. Superchiral near-fields can be excited in correspondence to these resonances, and anomalous behaviors as a function of the incidence polarization occur. Moreover, we introduce a singular value decomposition (SVD) approach to show that the above mentioned effects are connected to specific fingerprints of the SVD spectra. Finally, we demonstrate by means of an inverse design technique that the metasurface based on an L-shaped hole array is a minimal one. Indeed, its unit cell geometry depends on the smallest number of parameters needed to implement arbitrary transmission matrices compliant with the general symmetries for 2d-chiral structures. These observations enable more powerful wave operations in a lossless photonic environment.

physics.optics↗

arXiv2019

Optomechanical response with nanometer resolution in the self-mixing signal of a terahertz quantum cascade laser

The effectiveness of self-mixing interferometry has been demonstrated across the electromagnetic spectrum, from visible to microwave frequencies, in a plethora of sensing applications, ranging from distance measurement to material analysis, microscopy and coherent imaging. Owing to their intrinsic stability to optical feedback, quantum cascade lasers (QCLs) represent a source that offers unique and versatile characteristics to further improve the self-mixing functionality at mid infrared and terahertz (THz) frequencies. Here, we show the feasibility of detecting with nanometer precision deeply subwalength (< λ/6000) mechanical vibrations of a suspended Si3N4-membrane used as the external element of a THz QCL feedback interferometric apparatus. Besides representing a platform for the characterization of small displacements, our self-mixing configuration can be exploited for the realization of optomechanical systems, where several laser sources can be linked together through a common mechanical microresonator actuated by radiation pressure.

physics.optics↗

arXiv2018

Optomechanics of chiral dielectric metasurfaces

Electromagnetic fields coupled with mechanical degrees of freedom have recently shown exceptional and innovative applications, ultimately leading to mesoscopic optomechanical devices operating in the quantum regime of motion. Simultaneously, micromechanical elements have provided new ways to enhance and manipulate the optical properties of passive photonic elements. Following this concept, in this article we show how combining a chiral metasurface with a GaAs suspended micromembrane can offer new scenarios for controlling the polarization state of near-infrared light beams. Starting from the uncommon properties of chiral metasurface to statically realize target polarization states and circular and linear dichroism, we report mechanically induced, ~300 kHz polarization modulation, which favorably compares, in terms of speed, with liquid-crystals commercial devices. Moreover, we demonstrate how the mechanical resonance can be non-trivially affected by the input light polarization (and chiral state) via a thermoelastic effect triggered by intracavity photons. This work inaugurates the field of Polarization Optomechanics, which could pave the way to fast polarimetric devices, polarization modulators and dynamically tunable chiral state generators and detectors, as well as giving access to new form of polarization nonlinearities and control.

physics.optics↗

arXiv2017

Stretching graphene using polymeric micro-muscles

The control of strain in two-dimensional materials opens exciting perspectives for the engineering of their electronic properties. While this expectation has been validated by artificial-lattice studies, it remains elusive in the case of atomic lattices. Remarkable results were obtained on nanobubbles and nano-wrinkles, or using scanning probes; microscale strain devices were implemented exploiting deformable substrates or external loads. These devices lack, however, the flexibility required to fully control and investigate arbitrary strain profiles. Here, we demonstrate a novel approach making it possible to induce strain in graphene using polymeric micrometric artificial muscles (MAMs) that contract in a controllable and reversible way under an electronic stimulus. Our method exploits the mechanical response of poly-methyl-methacrylate (PMMA) to electron-beam irradiation. Inhomogeneous anisotropic strain and out-of-plane deformation are demonstrated and studied by Raman, scanning-electron and atomic-force microscopy. These can all be easily combined with the present device architecture. The flexibility of the present method opens new opportunities for the investigation of strain and nanomechanics in two-dimensional materials.

cond-mat.mes-hall↗

arXiv2016

Anisotropic straining of graphene using micropatterned SiN membranes

We use micro-Raman spectroscopy to study strain profiles in graphene monolayers suspended over SiN membranes micropatterned with holes of non-circular geometry. We show that a uniform differential pressure load $ΔP$ over elliptical regions of free-standing graphene yields measurable deviations from hydrostatic strain conventionally observed in radially-symmetric microbubbles. The top hydrostatic strain $\bar{\varepsilon}$ we observe is estimated to be $\approx0.7\%$ for $ΔP = 1\,{\rm bar}$ in graphene clamped to elliptical SiN holes with axis $40$ and $20\,{\rm μm}$. In the same configuration, we report a $G_\pm$ splitting of $10\,{\rm cm^{-1}}$ which is in good agreement with the calculated anisotropy $Δ\varepsilon \approx 0.6\%$ for our device geometry. Our results are consistent with the most recent reports on the Grüneisen parameters. Perspectives for the achievement of arbitrary strain configurations by designing suitable SiN holes and boundary clamping conditions are discussed.

cond-mat.mtrl-sci↗

arXiv2016

Thermal noise and optomechanical features in the emission of a membrane-coupled compound cavity laser diode

We demonstrate the use of a compound optical cavity as linear displacement detector, by measuring the thermal motion of a silicon nitride suspended membrane acting as the external mirror of a near-infrared Littrow laser diode. Fluctuations in the laser optical power induced by the membrane vibrations are collected by a photodiode integrated within the laser, and then measured with a spectrum analyzer. The dynamics of the membrane driven by a piezoelectric actuator is investigated as a function of air pressure and actuator displacement in a homodyne configuration. The high Q-factor ($\sim 3.4\cdot 10^4$ at $8.3 \cdot 10^{-3}$ mbar) of the fundamental mechanical mode at $\sim 73$ kHz guarantees a detection sensitivity high enough for direct measurement of thermal motion at room temperature ($\sim 87$ pm RMS). The compound cavity system here introduced can be employed as a table-top, cost-effective linear displacement detector for cavity optomechanics. Furthermore, thanks to the strong optical nonlinearities of the laser compound cavity, these systems open new perspectives in the study of non-Markovian quantum properties at the mesoscale.

cond-mat.mes-hall↗