Local tuning of WS2 photoluminescence using polymeric micro-actuators in a monolithic van der Waals heterostructure

Francesco Colangelo; Andrea Morandi; Stiven Forti; Filippo Fabbri; Camilla Coletti; Flavia Viola Di Girolamo; Alberto Di Lieto; Mauro Tonelli; Alessandro Tredicucci; Alessandro Pitanti; Stefano Roddaro

doi:10.1063/1.5122262

arXiv · 1903.06732

Local tuning of WS2 photoluminescence using polymeric micro-actuators in a monolithic van der Waals heterostructure

Francesco Colangelo·Andrea Morandi·Stiven Forti·Filippo Fabbri·Camilla Coletti·Flavia Viola Di Girolamo·Alberto Di Lieto·Mauro Tonelli·Alessandro Tredicucci·Alessandro Pitanti·Stefano Roddaro

View original source ↗Read source document ↗Export metadata ↓

Abstract

The control of the local strain profile in 2D materials offers an invaluable tool for tailoring the electronic and photonic properties of solid-state devices. In this paper, we demonstrate a local engineering of the exciton photoluminescence (PL) energy of monolayer tungsten disulfide (WS2) by means of strain. We apply a local uniaxial stress to WS2 by exploiting electron-beam patterned and actuated polymeric micrometric artificial muscles (MAMs), which we implement onto monolithic synthetic WS2/graphene heterostructures. We show that MAMs are able to induce an in-plane stress to the top WS2 layer of the van der Waals heterostructure and that the latter can slide on the graphene underneath with negligible friction. As a proof of concept for the local strain-induced PL shift experiments, we exploit a two-MAM configuration in order to apply uniaxial tensile stress on well-defined micrometric regions of WS2. Remarkably, our architecture does not require the adoption of fragile suspended microstructures. We observe a spatial modulation of the excitonic PL energy of the WS2 monolayers under stress, which agrees with the expected strain profile and attains a maximum redshift of about 40 meV at the maximum strain intensity point. After the actuation, a time-dependent PL blueshift is observed in agreement with the viscoelastic properties of the polymeric MAMs. Our approach enables inducing local and arbitrary deformation profiles and circumvents some key limitations and technical challenges of alternative strain engineering methods requiring the 2D material transfer and production of suspended membranes.

Explore related subjects

cond-mat.mes-hall cond-mat.mtrl-sci

Keep this discovery

BibTeX RIS

Francesco Colangelo, Andrea Morandi, Stiven Forti, Filippo Fabbri, Camilla Coletti, Flavia Viola Di Girolamo, Alberto Di Lieto, Mauro Tonelli, Alessandro Tredicucci, Alessandro Pitanti, Stefano Roddaro. 2019-03-15. Local tuning of WS2 photoluminescence using polymeric micro-actuators in a monolithic van der Waals heterostructure. https://doi.org/10.1063/1.5122262

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Emergence of spin-orbit coupling among spin, atomic orbital, and Bloch dynamics in Janus double-transition-metal MXenes

We found a spin-orbit coupling to cause a simultaneous correlation among three degrees of freedom, the electronic spin, orbital, and Bloch dynamics in an investigation into the electronic structure of Janus double-transition-metal MXenes, Mo$_2$HfC$_2$OS and W$_2$HfC$_2$OS. In this paper, it is also revealed that the spin-orbit coupling causes a staggered spin configuration with a trigonal pattern around the $\Gamma$ point near the insulating gap. We developed a reduced Hamiltonian describing the electronic states and show that the spin-orbit coupling cannot be equated with conventional forms for a single electron in solids, LS, Rashba, and Dresselhaus couplings, even in the approximation under the low-energy and small wave number condition. Because of the intrinsic shape of the conduction band, a trigonally alternating spin-momentum locking emerges with the spin axis perpendicular to the layer plane. The theoretical analysis shows that these Janus materials can provide a platform for exploring the spin-related phenomena due to the trigonal spin-momentum locking other than Rashba and Dresselhaus types.

cond-mat.mes-hall↗

arXiv2026

A substrate booster for P-type 2D ferromagnetic semiconductor

Spin transistors with its both charge and spin properties tuned via electrostatic gating are believed capable for widespread use, which however have proven challenging due to the extreme rareness of their physical base -- magnetic semiconductors. The latter are limited within very few systems including diluted magnetic semiconductors (DMS) and two-dimensional ferromagnetic semiconductors (2D-FMS), and known to suffer from inadequate gate-tunability of their electric and/or magnetic properties. Here, we show a substrate engineering paradigm by interfacing few-layered Cr$_{2}$Ge$_{2}$Te$_{6}$ (FL-CGT) with an antiferromagnetic insulator CrOCl. Owing to the subtle interfacial charge transfer couplings, CGT can be drastically turned from an ambipolar semiconductor into a high performance P-type semiconductor. When cooled below the Curie temperature, the ON-OFF ratio in such substrate-boosted FMS field-effect transistor (FET) reaches 10$^{5}$ with its coercive field $H_{c}$ of magnetic hysteresis loop tunable by a factor of more than 200$\%$, enabling {gate-assisted magnetic switching in the prototype semiconducting spin transistor architecture}. A crossover from critical power-law scaling to a dual power-law behaviour under heavy hole doping was further observed. Our findings {signify} an efficient interfacial charge transfer and electrically modulated magnetic anisotropy energy supported by calculations. This high performance P-type FMS-FET system suggests that active substrate-boosting paradigm might be a powerful path for the investigation of future gate-tunable spintronic devices.

cond-mat.mes-hall↗

arXiv2026

In-plane magnetic field control of anomalous Hall response enabled by magnetic anisotropy engineering

Engineering magnetic anisotropy provides a powerful route to control magnetization orientation and unlock emerging functionalities in opto-spintronic and current-driven devices. Beyond its role in magnetization reversal, the effective anisotropy can strongly influence the magnetotransport response, offering an additional degree of freedom to tune new device functionalities. In this work, we report a magnetotransport study of a ferrimagnetic [Tb/Co]$_{\times 5}$ multilayer grown with a Tb thickness gradient, whose wedge-shaped tilts the uniaxial anisotropy axis slightly away from the film normal. Anomalous Hall resistivity measurements from 80 K to 300 K reveal a spin reorientation transition, while the angular dependence of the magnetotransport responses exposes the crucial role of the tilted anisotropy. A simplified macrospin model reproduces the full angular response across the transition and shows that the observed anomalous Hall effect when the in-plane magnetic field is applied originates from the tilt of the uniaxial anisotropy axis, which supplies a built-in symmetry-breaking mechanism, enabling in-plane field control over the out-of-plane anomalous Hall response, sign included. These findings establish tilted magnetic anisotropy as a promising route toward Hall effect-based sensor applications and highlight Tb/Co multilayers as a versatile platform for anisotropy-engineered spintronic devices.

cond-mat.mes-hall↗