arXiv subjects

C. Michel

Publications and source records attributed to C. Michel.

At least 19 recordsLinked to original sources

arXiv2026

Experimental Realization of Optimized Ternary Mirror Coatings

We report on the first experimental realization of multi-material dielectric mirror coatings designed through a multi-objective optimization algorithm to simultaneously minimize thermal noise and optical losses. We validate this design strategy by fabricating and characterizing two distinct ternary systems: a SiNx -based proof-of-concept and a Ti:GeO2 -based system targeting lower optical losses. The performance of the SiN x coating shows remarkable agreement with predictions, demonstrating a noise amplitude spectral density reduction of 0.82 with respect to current reference coatings, and validating our design-to-fabrication pipeline. The Ti:GeO2 -based system achieves the crucial goal of sub-ppm absorption; its measured thermal noise, however, is higher than the theoretically predicted level of 0.71, extrapolated from single-layer material characterization. A dedicated tolerance analysis confirms that this discrepancy is not attributable to random thickness errors, emphasizing that further studies of the manufacturing process are needed to fully exploit this combination of materials. This work establishes a robust methodology for producing complex, high-performance optical coatings tailored for precision experiments.

physics.optics↗

arXiv2025

Irreversible thermalization vs reversible dynamics mediated by anomalous correlators: Wave turbulence theory and experiments in optical fibers

We theoretically and experimentally investigate spontaneous self-organization in a conservative (Hamiltonian) turbulent wave system, operating far from thermodynamic equilibrium. Our system is governed by two coherently coupled nonlinear Schr\"odinger equations, describing the polarization evolution of light in a dispersive nonlinear optical fiber. The analysis reveals the emergence of two fundamentally distinct turbulent regimes. In a first regime, the waves undergo a slow, irreversible thermalization process, which is accurately described by the wave turbulence kinetic equation and the associated H-theorem of entropy growth. In stark contrast with this expected irreversible process, we identify a second different regime, where strong phase-correlations spontaneously emerge, giving rise to a fast reversible oscillatory dynamics of the normal correlator and anomalous phase-correlator. Experimental observations confirm the occurrence of both irreversible thermalization and reversible dynamics mediated by the anomalous correlated fluctuations.

physics.optics↗

arXiv2024

Development of ion-beam sputtered silicon nitride thin films for low-noise mirror coatings of gravitational-wave detectors

Brownian thermal noise of thin-film coatings is a fundamental limit for high-precision experiments based on optical resonators such as gravitational-wave interferometers. Here we present the results of a research activity aiming to develop lower-noise ion-beam sputtered silicon nitride thin films compliant with the very stringent requirements on optical loss of gravitational-wave interferometers. In order to test the hypothesis of a correlation between the synthesis conditions of the films and their elemental composition and optical and mechanical properties, we varied the voltage, current intensity and composition of the sputtering ion beam, and we performed a broad campaign of characterizations. While the refractive index was found to monotonically depend on the beam voltage and linearly vary with the N/Si ratio, the optical absorption appeared to be strongly sensitive to other factors, as yet unidentified. However, by systematically varying the deposition parameters, an optimal working point was found. Thus we show that the loss angle and extinction coefficient of our thin films can be as low as $(1.0 \pm 0.1) \times 10^{-4}$ rad at $\sim$2.8 kHz and $(6.4 \pm 0.2) \times 10^{-6}$ at 1064 nm, respectively, after thermal treatment at 900 $^{\circ}$C. To the best of our knowledge, such loss angle value is the lowest ever measured on this class of thin films. We then used our silicon nitride thin films to design and produce a multi-material mirror coating showing a thermal noise amplitude of $(10.3 \pm 0.2) \times 10^{-18}$ m Hz$^{-1/2}$ at 100 Hz, which is 25\% lower than in current mirror coatings of the Advanced LIGO and Advanced Virgo interferometers, and an optical absorption as low as $(1.6 \pm 0.5)$ parts per million at 1064 nm.

physics.ins-det↗

arXiv2024

The MICADO first light imager for the ELT: off-axis performance of PSF reconstruction

The highest scientific return, for adaptive optics (AO) observations, is achieved with a reliable reconstruction of the PSF. This is especially true for MICADO@ELT. In this presentation, we will focus on extending the MICADO PSF reconstruction (PSF-R) method to the off-axis case. Specifically, a novel approach based on temporal-based tomography of AO telemetry data has been recently implemented. Results from the PSF-R of both simulated and real data show that, at half isoplanatic angle distances, a precision of about 10-15% is achievable in both Strehl ratio and full-width at half maximum, paving the way to extend the MICADO PSF-R tool also to the multi-conjugated AO case.

astro-ph.IM↗

arXiv2023

The TULIP project : first on-line result and near future

The TULIP project aims to produce radioactive ion beams of short-lived neutron-deficient isotopes by using fusion-evaporation reactions in an optimized Target Ion Source System (TISS). The first step consisted of the design of a TISS to produce rubidium isotopes. It was tested with a primary beam of $^{22}$Ne@4.5 MeV/A irradiating a natural Ni target at the SPIRAL1/GANIL facility in March 2022. Rates of $^{76,78}$Rb were measured as well as an exceptionally short atom-to-ion transformation time for an ISOL system, of the order of 200 $\mathrm{\micro}$s. The second step of the project aims at producing neutron-deficient short-lived metallic isotopes in the region of $^{100}$Sn. A "cold" prototype has been realized to study the electron impact ionization in the TISS cavity and a "hot" version is under construction to prepare an on-line experiment expected in the near future.

physics.ins-det↗

arXiv2023

Observation of light thermalization to negative temperature Rayleigh-Jeans equilibrium states in multimode optical fibers

Although the temperature of a thermodynamic system is usually believed to be a positive quantity, under particular conditions, negative temperature equilibrium states are also possible. Negative temperature equilibriums have been observed with spin systems, cold atoms in optical lattices and two-dimensional quantum superfluids. Here we report the observation of Rayleigh-Jeans thermalization of light waves to negative temperature equilibrium states. The optical wave relaxes to the equilibrium state through its propagation in a multimode optical fiber, i.e., in a conservative Hamiltonian system. The bounded energy spectrum of the optical fiber enables negative temperature equilibriums with high energy levels (high order fiber modes) more populated than low energy levels (low order modes). Our experiments show that negative temperature speckle beams are featured, in average, by a non-monotonous radial intensity profile. The experimental results are in quantitative agreement with the Rayleigh-Jeans theory without free parameters. Bringing negative temperatures to the field of optics opens the door to the investigation of fundamental issues of negative temperature states in a flexible experimental environment.

physics.optics↗

arXiv2022

Experimental observation of violent relaxation and the formation of out-of-equilibrium quasi-stationary states

Large scale structures in the Universe, ranging from globular clusters to entire galaxies, are the manifestation of relaxation to out-of-equilibrium states that are not described by standard statistical mechanics at equilibrium. Instead, they are formed through a process of a very different nature, i.e. violent relaxation. However, astrophysical time-scales are so large that it is not possible to directly observe these relaxation dynamics and therefore verify the details of the violent relaxation process. We develop a table-top experiment and model that allows us to directly observe effects such as mixing of phase space, and violent relaxation, leading to the formation of a table-top analogue of a galaxy. The experiment allows us to control a range of parameters, including the nonlocal (gravitational) interaction strength and quantum effects, thus providing an effective test-bed for gravitational models that cannot otherwise be directly studied in experimental settings.

physics.optics↗

arXiv2021

Exploration of co-sputtered Ta$_2$O$_5$-ZrO$_2$ thin films for gravitational-wave detectors

We report on the development and extensive characterization of co-sputtered tantala-zirconia thin films, with the goal to decrease coating Brownian noise in present and future gravitational-wave detectors. We tested a variety of sputtering processes of different energies and deposition rates, and we considered the effect of different values of cation ratio $η=$ Zr/(Zr+Ta) and of post-deposition heat treatment temperature $T_a$ on the optical and mechanical properties of the films. Co-sputtered zirconia proved to be an efficient way to frustrate crystallization in tantala thin films, allowing for a substantial increase of the maximum annealing temperature and hence for a decrease of coating mechanical loss. The lowest average coating loss was observed for an ion-beam sputtered sample with $η= 0.485 \pm 0.004$ annealed at 800 $^{\circ}$C, yielding $\overlineφ = 1.8 \times 10^{-4}$. All coating samples showed cracks after annealing. Although in principle our measurements are sensitive to such defects, we found no evidence that our results were affected. The issue could be solved, at least for ion-beam sputtered coatings, by decreasing heating and cooling rates down to 7 $^{\circ}$C/h. While we observed as little optical absorption as in the coatings of current gravitational-wave interferometers (0.5 parts per million), further development will be needed to decrease light scattering and avoid the formation of defects upon annealing.

physics.ins-det↗

arXiv2021

Optical and mechanical properties of ion-beam-sputtered Nb$_2$O$_5$ and TiO$_2$-Nb$_2$O$_5$ thin films for gravitational-wave interferometers

Brownian thermal noise associated with highly-reflective mirror coatings is a fundamental limit for several precision experiments, including gravitational-wave detectors. Recently, there has been a worldwide effort to find mirror coatings with improved thermal noise properties that also fulfill strict optical requirements such as low absorption and scatter. We report on the optical and mechanical properties of ion-beam-sputtered niobia and titania-niobia thin films, and we discuss application of such coatings in current and future gravitational-wave detectors. We also report an updated direct coating thermal noise measurement of the HR coatings used in Advanced LIGO and Advanced Virgo.

physics.ins-det↗

arXiv2020

Wave condensation with weak disorder versus beam self-cleaning in multimode fibers

Classical nonlinear random waves can exhibit a process of condensation. It originates in the singularity of the Rayleigh-Jeans equilibrium distribution and it is characterized by the macroscopic population of the fundamental mode of the system. Several recent experiments revealed a phenomenon of spatial beam cleaning of an optical field that propagates through a graded-index multimode optical fiber (MMF). Our aim in this article is to provide physical insight into the mechanism underlying optical beam self-cleaning through the analysis of wave condensation in the presence of structural disorder inherent to MMFs. We consider experiments of beam cleaning where long pulses are injected in the and populate many modes of a 10-20 m MMF, for which the dominant contribution of disorder originates from polarization random fluctuations (weak disorder). On the basis of the wave turbulence theory, we derive nonequilibrium kinetic equations describing the random waves in a regime where disorder dominates nonlinear effects. The theory reveals that the presence of a conservative weak disorder introduces an effective dissipation in the system, which is shown to inhibit wave condensation in the usual continuous wave turbulence approach. On the other hand, the experiments of beam cleaning are described by a discrete wave turbulence approach, where the effective dissipation induced by disorder modifies the regularization of wave resonances, which leads to an acceleration of condensation that can explain the effect of beam self-cleaning. The simulations are in quantitative agreement with the theory. The analysis also reveals that the effect of beam cleaning is characterized by a repolarization as a natural consequence of the condensation process. In addition, the discrete wave turbulence approach explains why optical beam self-cleaning has not been observed in step-index multimode fibers.

physics.optics↗

arXiv2015

Magneto-optics of massive Dirac fermions in bulk Bi2Se3

We report on magneto-optical studies of Bi2Se3, a representative member of the 3D topological insulator family. Its electronic states in bulk are shown to be well described by a simple Dirac-type Hamiltonian for massive particles with only two parameters: the fundamental bandgap and the band velocity. In a magnetic field, this model implies a unique property - spin splitting equal to twice the cyclotron energy: Es = 2Ec. This explains the extensive magneto-transport studies concluding a fortuitous degeneracy of the spin and orbital split Landau levels in this material. The Es = 2Ec match differentiates the massive Dirac electrons in bulk Bi2Se3 from those in quantum electrodynamics, for which Es = Ec always holds.

cond-mat.mes-hall↗

arXiv2014

Observation of the Three-Mode Parametric Instability

Three-mode parametric interactions occur in triply-resonant optomechanical systems: photons from an optical pump mode are coherently scattered to a high-order mode by mechanical motion of the cavity mirrors, and these modes resonantly interact via radiation pressure force when certain conditions are met. Such effects are predicted to occur in long baseline advanced gravitational-wave detectors. They can pump energy into acoustic modes, leading to parametric instability, but they can also extract acoustic energy, leading to optomechanical cooling. We develop a large amplitude model of three-mode interactions that explains the ring-up amplitude saturation after instability occurs. We also demonstrate both radiation-pressure cooling and mechanical amplification in two different three-mode optomechanical systems, including the first observation of the three-mode parametric instability in a free-space Fabry-Perot cavity. The experimental data agrees well with the theoretical model. Contrary to expectations, parametric instability does not lead to loss of cavity lock, a fact which may make it easier to implement control techniques to overcome instability.

physics.optics↗

arXiv2014

2D photonic-crystal optomechanical nanoresonator

We present the optical optimization of an optomechanical device based on a suspended InP membrane patterned with a 2D near-wavelength grating (NWG) based on a 2D photonic-crystal geometry. We first identify by numerical simulation a set of geometrical parameters providing a reflectivity higher than 99.8 % over a 50-nm span. We then study the limitations induced by the finite value of the optical waist and lateral size of the NWG pattern using different numerical approaches. The NWG grating, pierced in a suspended InP 265 nm-thick membrane, is used to form a compact microcavity involving the suspended nano-membrane as end mirror. The resulting cavity has a waist size smaller than 10 $μ$m and a finesse in the 200 range. It is used to probe the Brownian motion of the mechanical modes of the nanomembrane.

cond-mat.mes-hall↗

arXiv2012

Scientific Potential of Einstein Telescope

Einstein gravitational-wave Telescope (ET) is a design study funded by the European Commission to explore the technological challenges of and scientific benefits from building a third generation gravitational wave detector. The three-year study, which concluded earlier this year, has formulated the conceptual design of an observatory that can support the implementation of new technology for the next two to three decades. The goal of this talk is to introduce the audience to the overall aims and objectives of the project and to enumerate ET's potential to influence our understanding of fundamental physics, astrophysics and cosmology.

gr-qc↗

arXiv2012

Production of gamma rays by pulsed laser beam Compton scattering off GeV-electrons using a non-planar four-mirror optical cavity

As part of the positron source R&D for future $e^+-e^-$ colliders and Compton based compact light sources, a high finesse non-planar four-mirror Fabry-Perot cavity has recently been installed at the ATF (KEK, Tsukuba, Japan). The first measurements of the gamma ray flux produced with a such cavity using a pulsed laser is presented here. We demonstrate the production of a flux of 2.7 $\pm$ 0.2 gamma rays per bunch crossing ($\sim3\times10^6$ gammas per second) during the commissioning.

physics.acc-ph↗

arXiv2011

Non-planar four-mirror optical cavity for high intensity gamma ray flux production by pulsed laser beam Compton scattering off GeV-electrons

As part of the R&D toward the production of high flux of polarised Gamma-rays we have designed and built a non-planar four-mirror optical cavity with a high finesse and operated it at a particle accelerator. We report on the main challenges of such cavity, such as the design of a suitable laser based on fiber technology, the mechanical difficulties of having a high tunability and a high mechanical stability in an accelerator environment and the active stabilization of such cavity by implementing a double feedback loop in a FPGA.

physics.acc-ph↗

arXiv2011

A micropillar for cavity optomechanics

We present a new micromechanical resonator designed for cavity optomechanics. We have used a micropillar geometry to obtain a high-frequency mechanical resonance with a low effective mass and a very high quality factor. We have coated a 60-$μ$m diameter low-loss dielectric mirror on top of the pillar and are planning to use this micromirror as part of a high-finesse Fabry-Perot cavity, to laser cool the resonator down to its quantum ground state and to monitor its quantum position fluctuations by quantum-limited optical interferometry.

quant-ph↗

arXiv2010

Sensitivity Studies for Third-Generation Gravitational Wave Observatories

Advanced gravitational wave detectors, currently under construction, are expected to directly observe gravitational wave signals of astrophysical origin. The Einstein Telescope, a third-generation gravitational wave detector, has been proposed in order to fully open up the emerging field of gravitational wave astronomy. In this article we describe sensitivity models for the Einstein Telescope and investigate potential limits imposed by fundamental noise sources. A special focus is set on evaluating the frequency band below 10Hz where a complex mixture of seismic, gravity gradient, suspension thermal and radiation pressure noise dominates. We develop the most accurate sensitivity model, referred to as ET-D, for a third-generation detector so far, including the most relevant fundamental noise contributions.

gr-qc↗