arXiv subjects

Floris Braakman

Publications and source records attributed to Floris Braakman.

8 recordsLinked to original sources

arXiv2026

Imaging short- and long-range magnetic order in a quantum anomalous Hall insulator

The quantum anomalous Hall effect has been observed in several magnetically doped topological insulators, where its robustness and macroscopic magnetization properties have been taken to suggest the presence of long-range ferromagnetic order. However, experiments in such systems have found evidence for both long- and short-range order, leaving the precise nature of the magnetism in these systems unclear. Here, we use scanning superconducting quantum interference device microscopy to study magnetic domains in V-doped (Bi,Sb)$_2$Te$_3$ exhibiting a quantum anomalous Hall effect with precise quantization. By imaging stray magnetic fields as a function of applied field, we map the formation and evolution of domains through magnetic reversal. We reconstruct the magnetization configuration underlying the measured stray field and find that magnetic domains and crystallographic grains are of similar size. Moreover, magnetic reversal is found to occur through domain expansion, typical of ferromagnets, rather than through nucleation at random sites. Our measurements thus reveal a coexistence of both local magnetic interactions within crystallographic grains and long-range ferromagnetic coupling between grains. This behavior in V-doped (Bi,Sb)$_2$Te$_3$ is markedly distinct from that previously reported for Cr-doped (Bi,Sb)$_2$Te$_3$.

cond-mat.mtrl-sci↗

arXiv2024

Simulation and measurement of stray fields for the manipulation of spin-qubits in one- and two-dimensional arrays

The inhomogeneous magnetic stray field of micromagnets has been extensively used to manipulate electron spin qubits. By means of micromagnetic simulations and scanning superconducting quantum interference device microscopy, we show that the polycrystallinity of the magnet and non-uniform magnetization significantly impact the stray field and corresponding qubit properties. We find that the random orientation of the crystal axis in polycrystalline Co magnets alters the qubit frequencies by up to 0.5 GHz, compromising single qubit addressability and single gate fidelities. We map the stray field of Fe micromagnets with an applied magnetic field of up to 500 mT (mimicking conditions when operating qubits), finding field gradients above 1 mT/nm. The measured gradients and the lower magnetocrystalline anisotropy of Fe demonstrate the advantage of using Fe instead of Co for magnets in spin qubit devices. These properties of Fe also enabled us to design a 2D arrangement of nanomagnets for driving spin qubits distributed on a 2D lattice.

cond-mat.mes-hall↗

arXiv2023

Scanning NV magnetometry of focused-electron-beam-deposited cobalt nanomagnets

Focused-electron-beam-induced deposition is a promising technique for patterning nanomagnets for spin qubit control in a single step. We fabricate cobalt nanomagnets in such a process, obtaining cobalt contents and saturation magnetizations comparable to or higher than those typically obtained using electron-beam lithography. We characterize the nanomagnets using transmission electron microscopy and image their stray magnetic field using scanning NV magnetometry, finding good agreement with micromagnetic simulations. The magnetometry reveals the presence of magnetic domains and halo side-deposits, which are common for this fabrication technique. Finally, we estimate dephasing times for electron spin qubits in the presence of disordered stray fields due to these side-deposits.

cond-mat.mtrl-sci↗

arXiv2023

Mechanical mode imaging of a high-Q hybrid hBN/Si$_3$N$_4$ resonator

We image and characterize the mechanical modes of a 2D drum resonator made of hBN suspended over a high-stress Si$_3$N$_4$ membrane. Our measurements demonstrate hybridization between various modes of the hBN resonator and those of the Si$_3$N$_4$ membrane. The measured resonance frequencies and spatial profiles of the modes are consistent with finite-element simulations based on an idealized geometry. Spectra of the thermal motion reveal that, depending on the degree of hybridization with modes of the heavier and higher-quality-factor Si$_3$N$_4$ membrane, the quality factors and the motional mass of the hBN drum modes can be shifted by orders of magnitude. This effect could be exploited to engineer hybrid drum/membrane modes that combine the low motional mass of 2D materials with the high quality factor of Si$_3$N$_4$ membranes for optomechanical or sensing applications.

cond-mat.mes-hall↗

arXiv2022

A compact and versatile cryogenic probe station for quantum device testing

Fast feedback from cryogenic electrical characterization measurements is key for the development of scalable quantum computing technology. At room temperature, high-throughput device testing is accomplished with a probe-based solution, where electrical probes are repeatedly positioned onto devices for acquiring statistical data. In this work we present a probe station that can be operated from room temperature down to below 2$\,$K. Its small size makes it compatible with standard cryogenic measurement setups with a magnet. A large variety of electronic devices can be tested. Here, we demonstrate the performance of the prober by characterizing silicon fin field-effect transistors as a host for quantum dot spin qubits. Such a tool can massively accelerate the design-fabrication-measurement cycle and provide important feedback for process optimization towards building scalable quantum circuits.

cond-mat.mes-hall↗

arXiv2022

Electron-beam lithography of nanostructures at the tips of scanning probe cantilevers

We developed a process to fabricate nanoscale metallic gate electrodes on scanning probe cantilevers, including on the irregular surface of protruding cantilever tips. The process includes a floating-layer technique to coat the cantilevers in electron-beam resist. We demonstrate gate definition through a lift-off process, as well as through an etching process. The cantilevers maintain a high force sensitivity after undergoing the patterning process. Our method allows the patterning of nanoscale devices on fragile scanning probes, extending their functionality as sensors.

physics.ins-det↗

arXiv2022

A tunable fiber Fabry-Perot cavity for hybrid optomechanics stabilized at 4 K

We describe an apparatus for the implementation of hybrid optomechanical systems at 4 K. The platform is based on a high-finesse, micrometer-scale fiber Fabry-Perot cavity, which can be widely tuned using piezoelectric positioners. A mechanical resonator can be positioned within the cavity in the object-in-the-middle configuration by a second set of positioners. A high level of stability is achieved without sacrificing either performance or tunability, through the combination of a stiff mechanical design, passive vibration isolation, and an active Pound-Drever-Hall feedback lock incorporating a reconfigurable digital filter. The stability of the cavity length is demonstrated to be better than a few picometers over many hours both at room temperature and at 4 K.

physics.optics↗

arXiv2015

A quantum fiber-pigtail

We present the experimental realization of a quantum fiber-pigtail. The device consists of a semiconductor quantum-dot embedded into a conical photonic wire that is directly connected to the core of a fiber-pigtail. We demonstrate a photon collection efficiency at the output of the fiber of 5.8% and suggest realistic improvements for the implementation of a useful device in the context of quantum information. We finally discuss potential applications in scanning probe microscopy.

cond-mat.mes-hall↗