arXiv subjects

H. -S. Philip Wong

Publications and source records attributed to H. -S. Philip Wong.

At least 37 records · Page 2Linked to original sources

arXiv2020

Electrical Tuning of Phase Change Antennas and Metasurfaces

The success of semiconductor electronics is built on the creation of compact, low-power switching elements that offer routing, logic, and memory functions. The availability of nanoscale optical switches could have a similarly transformative impact on the development of dynamic and programmable metasurfaces, optical neural networks, and quantum information processing. Phase change materials are uniquely suited to enable their creation as they offer high-speed electrical switching between amorphous and crystalline states with notably different optical properties. Their high refractive index has also been harnessed to fashion them into compact optical antennas. Here, we take the next important step by realizing electrically-switchable phase change antennas and metasurfaces that offer strong, reversible, non-volatile, multi-phase switching and spectral tuning of light scattering in the visible and near-infrared spectral ranges. Their successful implementation relies on a careful joint thermal and optical optimization of the antenna elements that comprise an Ag strip that simultaneously serves as a plasmonic resonator and a miniature heating stage.

physics.optics↗

arXiv2020

Nanotechnology-inspired Information Processing Systems of the Future

Nanoscale semiconductor technology has been a key enabler of the computing revolution. It has done so via advances in new materials and manufacturing processes that resulted in the size of the basic building block of computing systems - the logic switch and memory devices - being reduced into the nanoscale regime. Nanotechnology has provided increased computing functionality per unit volume, energy, and cost. In order for computing systems to continue to deliver substantial benefits for the foreseeable future to society at large, it is critical that the very notion of computing be examined in the light of nanoscale realities. In particular, one needs to ask what it means to compute when the very building block - the logic switch - no longer exhibits the level of determinism required by the von Neumann architecture. There needs to be a sustained and heavy investment in a nation-wide Vertically Integrated Semiconductor Ecosystem (VISE). VISE is a program in which research and development is conducted seamlessly across the entire compute stack - from applications, systems and algorithms, architectures, circuits and nanodevices, and materials. A nation-wide VISE provides clear strategic advantages in ensuring the US's global superiority in semiconductors. First, a VISE provides the highest quality seed-corn for nurturing transformative ideas that are critically needed today in order for nanotechnology-inspired computing to flourish. It does so by dramatically opening up new areas of semiconductor research that are inspired and driven by new application needs. Second, a VISE creates a very high barrier to entry from foreign competitors because it is extremely hard to establish, and even harder to duplicate.

cs.CY↗

arXiv2019

Device and Circuit Interaction Analysis of Stochastic Behaviors in Cross-Point RRAM Arrays

Stochastic behaviors of resistive random access memory (RRAM) play an important role in the design of cross-point memory arrays. A Monte Carlo compact model of oxide RRAM is developed and calibrated with experiments on various device stack configurations. With Monte Carlo SPICE simulations, we show that an increase in array size and interconnect wire resistance will statistically deteriorate write functionality. Write failure probability (WFP) has an exponential dependency on device uniformity and supply voltage (VDD), and the array bias scheme is a key knob. Lowering array VDD leads to higher effective energy consumption (EEC) due to the increase in WFP when the variation statistics are included in the analysis. Random-access simulations indicate that data sparsity statistically benefits write functionality and energy consumption. Finally, we show that a pseudo-sub-array topology with uniformly distributed pre-forming cells in the pristine high resistance state is able to reduce both WFP and EEC, enabling higher net capacity for memory circuits due to improved variation tolerance.

cs.ET↗

arXiv2019

Localized Triggering of the Insulator-Metal Transition in VO2 using a Single Carbon Nanotube

Vanadium dioxide (VO2) has been widely studied for its rich physics and potential applications, undergoing a prominent insulator-metal transition (IMT) near room temperature. The transition mechanism remains highly debated, and little is known about the IMT at nanoscale dimensions. To shed light on this problem, here we use ~1 nm wide carbon nanotube (CNT) heaters to trigger the IMT in VO2. Single metallic CNTs switch the adjacent VO2 at less than half the voltage and power required by control devices without a CNT, with switching power as low as ~85 $μW$ at 300 nm device lengths. We also obtain potential and temperature maps of devices during operation using Kelvin Probe Microscopy (KPM) and Scanning Thermal Microscopy (SThM). Comparing these with three-dimensional electrothermal simulations, we find that the local heating of the VO2 by the CNT play a key role in the IMT. These results demonstrate the ability to trigger IMT in VO2 using nanoscale heaters, and highlight the significance of thermal engineering to improve device behaviour.

cond-mat.mtrl-sci↗

arXiv2019

Engineering Thermal and Electrical Interface Properties of Phase Change Memory with Monolayer MoS2

Phase change memory (PCM) is an emerging data storage technology, however its programming is thermal in nature and typically not energy-efficient. Here we reduce the switching power of PCM through the combined approaches of filamentary contacts and thermal confinement. The filamentary contact is formed through an oxidized TiN layer on the bottom electrode, and thermal confinement is achieved using a monolayer semiconductor interface, three-atom thick MoS2. The former reduces the switching volume of the phase change material and yields a 70% reduction in reset current versus typical 150 nm diameter mushroom cells. The enhanced thermal confinement achieved with the ultra-thin (~6 Å) MoS2 yields an additional 30% reduction in switching current and power. We also use detailed simulations to show that further tailoring the electrical and thermal interfaces of such PCM cells toward their fundamental limits could lead up to a six-fold benefit in power efficiency.

physics.app-ph↗

arXiv2018

Hyperdimensional Computing Nanosystem

One viable solution for continuous reduction in energy-per-operation is to rethink functionality to cope with uncertainty by adopting computational approaches that are inherently robust to uncertainty. It requires a novel look at data representations, associated operations, and circuits, and at materials and substrates that enable them. 3D integrated nanotechnologies combined with novel brain-inspired computational paradigms that support fast learning and fault tolerance could lead the way. Recognizing the very size of the brain's circuits, hyperdimensional (HD) computing can model neural activity patterns with points in a HD space, that is, with hypervectors as large randomly generated patterns. At its very core, HD computing is about manipulating and comparing these patterns inside memory. Emerging nanotechnologies such as carbon nanotube field effect transistors (CNFETs) and resistive RAM (RRAM), and their monolithic 3D integration offer opportunities for hardware implementations of HD computing through tight integration of logic and memory, energy-efficient computation, and unique device characteristics. We experimentally demonstrate and characterize an end-to-end HD computing nanosystem built using monolithic 3D integration of CNFETs and RRAM. With our nanosystem, we experimentally demonstrate classification of 21 languages with measured accuracy of up to 98% on >20,000 sentences (6.4 million characters), training using one text sample (~100,000 characters) per language, and resilient operation (98% accuracy) despite 78% hardware errors in HD representation (outputs stuck at 0 or 1). By exploiting the unique properties of the underlying nanotechnologies, we show that HD computing, when implemented with monolithic 3D integration, can be up to 420X more energy-efficient while using 25X less area compared to traditional silicon CMOS implementations.

cs.ET↗

arXiv2017

Opportunities for Analog Coding in Emerging Memory Systems

The exponential growth in data generation and large-scale data analysis creates an unprecedented need for inexpensive, low-latency, and high-density information storage. This need has motivated significant research into multi-level memory systems that can store multiple bits of information per device. Although both the memory state of these devices and much of the data they store are intrinsically analog-valued, both are quantized for use with digital systems and discrete error correcting codes. Using phase change memory as a prototypical multi-level storage technology, we herein demonstrate that analog-valued devices can achieve higher capacities when paired with analog codes. Further, we find that storing analog signals directly through joint-coding can achieve low distortion with reduced coding complexity. By jointly optimizing for signal statistics, device statistics, and a distortion metric, finite-length analog encodings can perform comparable to digital systems with asymptotically infinite large encodings. These results show that end-to-end analog memory systems have not only the potential to reach higher storage capacities than discrete systems, but also to significantly lower coding complexity, leading to faster and more energy efficient storage.

cs.IT↗

arXiv2016

Training a Probabilistic Graphical Model with Resistive Switching Electronic Synapses

Current large scale implementations of deep learning and data mining require thousands of processors, massive amounts of off-chip memory, and consume gigajoules of energy. Emerging memory technologies such as nanoscale two-terminal resistive switching memory devices offer a compact, scalable and low power alternative that permits on-chip co-located processing and memory in fine-grain distributed parallel architecture. Here we report first use of resistive switching memory devices for implementing and training a Restricted Boltzmann Machine (RBM), a generative probabilistic graphical model as a key component for unsupervised learning in deep networks. We experimentally demonstrate a 45-synapse RBM realized with 90 resistive switching phase change memory (PCM) elements trained with a bio-inspired variant of the Contrastive Divergence (CD) algorithm, implementing Hebbian and anti-Hebbian weight updates. The resistive PCM devices show a two-fold to ten-fold reduction in error rate in a missing pixel pattern completion task trained over 30 epochs, compared to untrained case. Measured programming energy consumption is 6.1 nJ per epoch with the resistive switching PCM devices, a factor of ~150 times lower than conventional processor-memory systems. We analyze and discuss the dependence of learning performance on cycle-to-cycle variations as well as number of gradual levels in the PCM analog memory devices.

cs.NE↗

arXiv2016

High Current Density and Low Thermal Conductivity of Atomically Thin Semimetallic WTe2

Two-dimensional (2D) semimetals beyond graphene have been relatively unexplored in the atomically-thin limit. Here we introduce a facile growth mechanism for semimetallic WTe2 crystals, then fabricate few-layer test structures while carefully avoiding degradation from exposure to air. Low-field electrical measurements of 80 nm to 2 um long devices allow us to separate intrinsic and contact resistance, revealing metallic response in the thinnest encapsulated and stable WTe2 devices studied to date (3 to 20 layers thick). High-field electrical measurements and electro-thermal modeling demonstrate that ultra-thin WTe2 can carry remarkably high current density (approaching 50 MA/cm2, higher than most common interconnect metals) despite a very low thermal conductivity (of the order ~3 W/m/K). These results suggest several pathways for air-stable technological viability of this layered semimetal.

cond-mat.mtrl-sci↗

arXiv2016

Picosecond electric-field-induced threshold switching in phase-change materials

Many chalcogenide glasses undergo a breakdown in electronic resistance above a critical field strength. Known as threshold switching, this mechanism enables field-induced crystallization in emerging phase-change memory. Purely electronic as well as crystal nucleation assisted models have been employed to explain the electronic breakdown. Here, picosecond electric pulses are used to excite amorphous Ag$_4$In$_3$Sb$_{67}$Te$_{26}$. Field-dependent reversible changes in conductivity and pulse-driven crystallization are observed. The present results show that threshold switching can take place within the electric pulse on sub-picosecond time-scales - faster than crystals can nucleate. This supports purely electronic models of threshold switching and reveals potential applications as an ultrafast electronic switch.

cond-mat.mtrl-sci↗

arXiv2016

Device and System Level Design Considerations for Analog-Non-Volatile-Memory Based Neuromorphic Architectures

This paper gives an overview of recent progress in the brain inspired computing field with a focus on implementation using emerging memories as electronic synapses. Design considerations and challenges such as requirements and design targets on multilevel states, device variability, programming energy, array-level connectivity, fan-in/fanout, wire energy, and IR drop are presented. Wires are increasingly important in design decisions, especially for large systems, and cycle-to-cycle variations have large impact on learning performance.

cs.NE↗

arXiv2015

TPAD: Hardware Trojan Prevention and Detection for Trusted Integrated Circuits

There are increasing concerns about possible malicious modifications of integrated circuits (ICs) used in critical applications. Such attacks are often referred to as hardware Trojans. While many techniques focus on hardware Trojan detection during IC testing, it is still possible for attacks to go undetected. Using a combination of new design techniques and new memory technologies, we present a new approach that detects a wide variety of hardware Trojans during IC testing and also during system operation in the field. Our approach can also prevent a wide variety of attacks during synthesis, place-and-route, and fabrication of ICs. It can be applied to any digital system, and can be tuned for both traditional and split-manufacturing methods. We demonstrate its applicability for both ASICs and FPGAs. Using fabricated test chips with Trojan emulation capabilities and also using simulations, we demonstrate: 1. The area and power costs of our approach can range between 7.4-165% and 0.07-60%, respectively, depending on the design and the attacks targeted; 2. The speed impact can be minimal (close to 0%); 3. Our approach can detect 99.998% of Trojans (emulated using test chips) that do not require detailed knowledge of the design being attacked; 4. Our approach can prevent 99.98% of specific attacks (simulated) that utilize detailed knowledge of the design being attacked (e.g., through reverse-engineering). 5. Our approach never produces any false positives, i.e., it does not report attacks when the IC operates correctly.

cs.AR↗

arXiv2015

Metal Oxide Resistive Memory using Graphene Edge Electrode

The emerging paradigm of abundant-data computing requires real-time analytics on enormous quantities of data collected by a mushrooming network of sensors. Todays computing technology, however, cannot scale to satisfy such big data applications with the required throughput and energy efficiency. The next technology frontier will be monolithically integrated chips with three dimensionally interleaved memory and logic for unprecedented data bandwidth with reduced energy consumption. In this work, we exploit the atomically thin nature of the graphene edge to assemble a resistive memory stacked in a vertical three dimensional structure. We report some of the lowest power and energy consumption among the emerging non-volatile memories due to an extremely thin electrode with unique properties, low programming voltages, and low current. Circuit analysis of the architecture using experimentally measured device properties show higher storage potential for graphene devices compared that of metal based devices.

cond-mat.mes-hall↗

arXiv2015

Rapid Co-optimization of Processing and Circuit Design to Overcome Carbon Nanotube Variations

Carbon nanotube field-effect transistors (CNFETs) are promising candidates for building energy-efficient digital systems at highly-scaled technology nodes. However, carbon nanotubes (CNTs) are inherently subject to variations that reduce circuit yield, increase susceptibility to noise, and severely degrade their anticipated energy and speed benefits. Joint exploration and optimization of CNT processing options and CNFET circuit design are required to overcome this outstanding challenge. Unfortunately, existing approaches for such exploration and optimization are computationally expensive, and mostly rely on trial-and-error-based ad hoc techniques. In this paper, we present a framework that quickly evaluates the impact of CNT variations on circuit delay and noise margin, and systematically explores the large space of CNT processing options to derive optimized CNT processing and CNFET circuit design guidelines. We demonstrate that our framework: 1) runs over 100x faster than existing approaches, and 2) accurately identifies the most important CNT processing parameters, together with CNFET circuit design parameters (e.g., for CNFET sizing and standard cell layouts), to minimize the impact of CNT variations on CNFET circuit speed with less than 5% energy cost, while simultaneously meeting circuit-level noise margin and yield constraints.

cs.ET↗

arXiv2015

A Compact Virtual-Source Model for Carbon Nanotube Field-Effect Transistors in the Sub-10-nm Regime - Part II Extrinsic Elements, Performance Assessment, and Design Optimization

We present a data-calibrated compact model of carbon nanotube (CNT) field-effect transistors (CNFETs) including contact resistance, direct source-to-drain and band-to-band tunneling currents. The model captures the effects of dimensional scaling and performance degradations due to parasitic effects and is used to study the trade-offs between the drive current and leakage current of CNFETs according to the selection of CNT diameter, CNT density, contact length, and gate length for a target contacted gate pitch. We describe a co-optimization study of CNFET device parameters near the limits of scaling with physical insight, and project the CNFET performance at the 5-nm technology node with an estimated contacted gate pitch of 31 nm. Based on the analysis including parasitic resistance, capacitance, and tunneling leakage current, a CNT density of 180 CNTs/μm will enable CNFET technology to meet the ITRS target of drive current (1.33 mA/μm), which is within reach of modern experimental capabilities

cond-mat.mes-hall↗

arXiv2015

A Compact Virtual-Source Model for Carbon Nanotube Field-Effect Transistors in the Sub-10-nm Regime-Part I Intrinsic Elements

We presents a data-calibrated compact model of carbon nanotube (CNT) field-effect transistors (CNFETs) based on the virtual-source (VS) approach, describing the intrinsic current-voltage and charge-voltage characteristics. The features of the model include: (i) carrier VS velocity extracted from experimental devices with gate lengths down to 15 nm; (ii) carrier effective mobility and velocity depending on the CNT diameter; (iii) short channel effect such as inverse subthreshold slope degradation and drain-induced barrier lowering depending on the device dimensions; (iv) small-signal capacitances including the CNT quantum capacitance effect to account for the decreasing gate capacitance at high gate bias. The CNFET model captures dimensional scaling effects and is suitable for technology benchmarking and performance projection at the sub-10-nm technology nodes.

cond-mat.mes-hall↗

arXiv2014

Brain-like associative learning using a nanoscale non-volatile phase change synaptic device array

Recent advances in neuroscience together with nanoscale electronic device technology have resulted in huge interests in realizing brain-like computing hardwares using emerging nanoscale memory devices as synaptic elements. Although there has been experimental work that demonstrated the operation of nanoscale synaptic element at the single device level, network level studies have been limited to simulations. In this work, we demonstrate, using experiments, array level associative learning using phase change synaptic devices connected in a grid like configuration similar to the organization of the biological brain. Implementing Hebbian learning with phase change memory cells, the synaptic grid was able to store presented patterns and recall missing patterns in an associative brain-like fashion. We found that the system is robust to device variations, and large variations in cell resistance states can be accommodated by increasing the number of training epochs. We illustrated the tradeoff between variation tolerance of the network and the overall energy consumption, and found that energy consumption is decreased significantly for lower variation tolerance.

cs.NE↗

arXiv2014

Experimental Demonstration of Array-level Learning with Phase Change Synaptic Devices

The computational performance of the biological brain has long attracted significant interest and has led to inspirations in operating principles, algorithms, and architectures for computing and signal processing. In this work, we focus on hardware implementation of brain-like learning in a brain-inspired architecture. We demonstrate, in hardware, that 2-D crossbar arrays of phase change synaptic devices can achieve associative learning and perform pattern recognition. Device and array-level studies using an experimental 10x10 array of phase change synaptic devices have shown that pattern recognition is robust against synaptic resistance variations and large variations can be tolerated by increasing the number of training iterations. Our measurements show that increase in initial variation from 9 % to 60 % causes required training iterations to increase from 1 to 11.

cs.NE↗