arXiv subjects

Igor Aharonovich

Publications and source records attributed to Igor Aharonovich.

At least 181 records · Page 10Linked to original sources

arXiv2016

Localization of narrowband single photon emitters in nanodiamonds

Diamond nanocrystals that host room temperature narrowband single photon emitters are highly sought after for applications in nanophotonics and bio-imaging. However, current understanding of the origin of these emitters is extremely limited. In this work we demonstrate that the narrowband emitters are point defects localized at extended morphological defects in individual nanodiamonds. In particular, we show that nanocrystals with defects such as twin boundaries and secondary nucleation sites exhibit narrowband emission that is absent from pristine individual nanocrystals grown under the same conditions. Critically, we prove that the narrowband emission lines vanish when extended defects are removed deterministically using highly localized electron beam induced etching. Our results enhance the current understanding of single photon emitters in diamond, and are directly relevant to fabrication of novel quantum optics devices and sensors.

physics.optics↗

arXiv2015

Emergent formation of dynamic topographic patterns in electron beam induced etching

Spontaneous formation of geometric patterns is a fascinating, ubiquitous process that provides fundamental insights into the roles of symmetry breaking, anisotropy and nonlinear interactions in emergent phenomena. Here we report dynamic, highly ordered topographic patterns on the surface of diamond that span multiple length scales and have a symmetry controlled by the chemical species of a precursor gas used in electron beam induced etching (EBIE). This behavior reveals an underlying etch rate anisotropy and an electron energy transfer pathway that has been overlooked by existing EBIE theory. We present an etch rate kinetics model that fully explains our results and is universally applicable to EBIE. Our findings can be exploited for controlled wetting, optical structuring and other emerging applications that require nano and micro-scale surface texturing.

cond-mat.mtrl-sci↗

arXiv2015

Facile Self-Assembly of Quantum Plasmonic Circuit Components

Efficient coupling between solid state quantum emitters and plasmonic waveguides is important for the realization of integrated circuits for quantum information, communication and sensing. However, realization of plasmonic circuits is still scarce, particularly due to challenges associated with accurate positioning of quantum emitters near plasmonic resonators. Current pathways for the construction of plasmonic circuits involve cumbersome and costly methods such as scanning atomic force microscopy or mechanical manipulation, where individual elements are physically relocated using the scanning tip. Here, we introduce a simple, fast and cost effective chemical self-assembly method for the attachment of two primary components of a practical plasmonic circuit: a single photon emitter and a waveguide. Our method enables coupling of nanodiamonds with a single quantum emitter (the nitrogen-vacancy (NV) center) onto the terminal of a silver nanowire, by simply varying the concentration of ascorbic acid (AA) in a reaction solution. The AA concentration is used to control the extent of agglomeration, and can be optimised so as to cause preferential, selective activation of the tips of the nanowires. The nanowire-nanodiamond structures show efficient plasmonic coupling of fluorescence emission from single NV centers into surface plasmon polariton (SPP) modes, evidenced by a more than two-fold reduction in fluorescence lifetime and an increase in fluorescence intensity.

cond-mat.mtrl-sci↗

arXiv2015

Quantum Emission From Hexagonal Boron Nitride Monolayers

Atomically thin van der Waals crystals have recently enabled new scientific and technological breakthroughs across a variety of disciplines in materials science, nanophotonics and physics. However, non-classical photon emission from these materials has not been achieved to date. Here we report room temperature quantum emission from hexagonal boron nitride nanoflakes. The single photon emitter exhibits a combination of superb quantum optical properties at room temperature that include the highest brightness reported in the visible part of the spectrum, narrow line width, absolute photo-stability, a short excited state lifetime and a high quantum efficiency. Density functional theory modeling suggests that the emitter is the antisite nitrogen vacancy defect that is present in single and multi-layer hexagonal boron nitride. Our results constitute the unprecedented potential of van der Waals crystals for nanophotonics, optoelectronics and quantum information processing.

cond-mat.mtrl-sci↗

arXiv2015

Electrical excitation of silicon-vacancy centers in single crystal diamond

Electrically driven emission from negatively charged silicon-vacancy, (SiV)- centres in single crystal diamond is demonstrated. The SiV centres were generated using ion implantation into an intrinsic (i) region of a p-i-n single crystal diamond diode. Both electroluminescence and the photoluminescence signals exhibit the typical emission that is attributed to the (SiV)- centres. Under forward and reversed biased PL measurements, no signal from the neutral (SiV)0 defect could be observed. The realization of electrically driven (SiV)- emission is promising for scalable nanophotonics devices employing colour centres in single crystal diamond.

cond-mat.mtrl-sci↗

arXiv2015

Electroluminescence from isolated defects in zinc oxide, towards electrically triggered single photon sources at room temperature

Single photon sources are required for a wide range of applications in quantum information science, quantum cryptography and quantum communications. However, so far majority of room temperature emitters are only excited optically, which limits their proper integration into scalable devices. In this work, we overcome this limitation and present room temperature electrically triggered light emission from localized defects in zinc oxide (ZnO) nanoparticles and thin films. The devices emit at the red spectral range and show excellent rectifying behavior. The emission is stable over an extensive period of time, providing an important prerequisite for practical devices. Our results open up possibilities to build new ZnO based quantum integrated devices that incorporate solid-state single photon sources for quantum information technologies.

cond-mat.mtrl-sci↗

arXiv2015

Direct-write milling of diamond by a focused oxygen ion beam

Recent advances in focused ion beam technology have enabled high-resolution, direct-write nanofabrication using light ions. Studies with light ions to date have, however, focused on milling of materials where sub-surface ion beam damage does not inhibit device performance. Here we report on direct-write milling of single crystal diamond using a focused beam of oxygen ions. Material quality is assessed by Raman and luminescence analysis, and reveals that the damage layer generated by oxygen ions can be removed by nonintrusive post-processing methods such as localised electron beam induced chemical etching.

cond-mat.mtrl-sci↗

arXiv2015

Enhanced photoluminescence from single nitrogen-vacancy defects in nanodiamonds coated with metal-phenolic networks

Fluorescent nanodiamonds are attracting major attention in the field of bio-sensing and biolabeling. In this work we demonstrate a robust approach to surface functionalize individual nanodiamonds with metal-phenolic networks that enhance the photoluminescence from single nitrogen vacancy (NV) centers. We show that single NV centres in the coated nanodiamonds also exhibit shorter lifetimes, opening another channel for high resolution sensing. We propose that the nanodiamond encapsulation suppresses the non-radiative decay pathways of the NV color centers. Our results provide a versatile and assessable way to enhance photoluminescence from nanodiamond defects that can be used in a variety of sensing and imaging applications

physics.optics↗

arXiv2014

Deterministic coupling of delta-doped NV centers to a nanobeam photonic crystal cavity

The negatively-charged nitrogen vacancy center (NV) in diamond has generated significant interest as a platform for quantum information processing and sensing in the solid state. For most applications, high quality optical cavities are required to enhance the NV zero-phonon line (ZPL) emission. An outstanding challenge in maximizing the degree of NV-cavity coupling is the deterministic placement of NVs within the cavity. Here, we report photonic crystal nanobeam cavities coupled to NVs incorporated by a delta-doping technique that allows nanometer-scale vertical positioning of the emitters. We demonstrate cavities with Q up to ~24,000 and mode volume V ~ $0.47(λ/n)^{3}$ as well as resonant enhancement of the ZPL of an NV ensemble with Purcell factor of ~20. Our fabrication technique provides a first step towards deterministic NV-cavity coupling using spatial control of the emitters.

cond-mat.mes-hall↗

arXiv2014

Diamond Nanophotonics

The burgeoning field of nanophotonics has grown to be a major research area, primarily because of the ability to control and manipulate single quantum systems (emitters) and single photons on demand. For many years studying nanophotonic phenomena was limited to traditional semiconductors (including silicon and GaAs) and experiments were carried out predominantly at cryogenic temperatures. In the last decade, however, diamond has emerged as a new contender to study photonic phenomena at the nanoscale. Offering plethora of quantum emitters that are optically active at room temperature and ambient conditions, diamond has been exploited to demonstrate super-resolution microscopy and realize entanglement, Purcell enhancement and other quantum and classical nanophotonic effects. Elucidating the importance of diamond as a material, this review will highlight the recent achievements in the field of diamond nanophotonics, and convey a roadmap for future experiments and technological advancements.

quant-ph↗

arXiv2014

Study of narrowband single photon emitters in polycrystalline diamond films

Quantum information processing and integrated nanophotonics require robust generation of single photon emitters on demand. In this work we demonstrate that diamond films grown by microwave plasma chemical vapour deposition on a silicon substrate host bright, narrowband single photon emitters in the visible to near infrared spectral range. The emitters possess fast lifetime, absolute photostability, and exhibit full polarization at excitation and emission. Pulsed and continuous laser excitations confirm their quantum behaviour at room temperature, while low temperature spectroscopy is done to investigate their inhomogeneous broadening. Our results advance the knowledge of solid state single photon sources and open pathways for their practical implementation in quantum communication and quantum information processing.

cond-mat.mtrl-sci↗

arXiv2014

Quantum-confined single photon emission at room temperature from Silicon carbide tetrapods

Controlled engineering of isolated solid state quantum systems is one of the most prominent goals in modern nanotechnology. In this letter we demonstrate a previously unknown quantum system namely silicon carbide tetrapods. The tetrapods have a cubic polytype core (3C) and hexagonal polytype legs (4H) a geometry that creates a spontaneous polarization within a single tetrapod. Modeling of the tetrapod structures predict that a bound exciton should exist at the 3C 4H interface. The simulations are confirmed by the observation of fully polarized and narrowband single photon emission from the tetrapods at room temperature. The single photon emission provides important insights towards understanding the quantum confinement effects in non-spherical nanostructures. Our results pave the way to a new class of crystal phase nanomaterials that exhibit single photon emission at room temperature and therefore are suitable for sensing, quantum information and nanophotonics.

cond-mat.mtrl-sci↗

arXiv2014

Distinctive Signature of Indium Gallium Nitride Quantum Dot Lasing in Microdisks Cavities

Low threshold lasers realized within compact, high quality optical cavities enable a variety of nanophotonics applications. Gallium nitride (GaN) materials containing indium gallium nitride (InGaN) quantum dots and quantum wells offer an outstanding platform to study light matter interactions and realize practical devices such as efficient light emitting diodes and nanolasers. Despite progress in the growth and characterization of InGaN quantum dots, their advantages as the gain medium in low threshold lasers have not been clearly demonstrated. This work seeks to better understand the reasons for these limitations by focusing on the simpler, limited-mode microdisk cavities, and by carrying out comparisons of lasing dynamics in those cavities using varying gain media including InGaN quantum wells, fragmented quantum wells, and a combination of fragmented quantum wells with quantum dots. For each gain medium, we utilize the distinctive, high quality (Q~5500) modes of the cavities, and the change in the highest intensity mode as a function of pump power to better understand the dominant radiative processes. The variations of threshold power and lasing wavelength as a function of gain medium help us identify the possible limitations to lower-threshold lasing with quantum dot active medium. In addition, we have identified a distinctive lasing signature for quantum dot materials, which consistently lase at wavelengths shorter than the peak of the room temperature gain emission. These findings not only provide better understanding of lasing in nitride-based quantum dot cavity systems, but also shed insight into the more fundamental issues of light matter coupling in such systems.

physics.optics↗

arXiv2014

Localized chemical switching of the charge state of nitrogen-vacancy luminescence centers in diamond

We present a beam-directed chemical technique for controlling the charge states of near-surface luminescence centers in semiconductors. Specifically, we fluorinate the surface of H-terminated diamond by electron beam irradiation in the presence of NF3 vapor. The fluorination treatment acts as a local chemical switch that alters the charge state of nitrogen-vacancy luminescence centers from the neutral to the negative state. The electron beam fluorination process is highly localized and can be used to control the emission spectrum of individual nanodiamonds and surface regions scanned by the electron beam

cond-mat.mtrl-sci↗

arXiv2014

Subtractive 3D Printing of Optically Active Diamond Structures

Diamond has recently attracted considerable attention as a promising platform for quantum technologies, photonics and high resolution sensing applications. Here we demonstrate a chemical approach that enables the fabrication of functional diamond structures using gas-mediated electron induced etching. The method achieves chemical etching at room temperature through the dissociation of surface-adsorbed H2O molecules by electron irradiation in a water vapor environment. High throughput, parallel processing is possible by electron flood exposure and the use of an etch mask, while single step, mask-free three dimensional fabrication and iterative editing are achieved using a variable pressure scanning electron microscope. The electron induced chemical etching paves the way to a transformative technology for nanofabrication of diamond and other wide band-gap semiconductors.

cond-mat.mtrl-sci↗

arXiv2014

Single photon emission from ZnO nanoparticles

Room temperature single photon emitters are very important resources for photonics and emerging quantum technologies. In this work we study single photon emission from defect centers in 20 nm zinc oxide (ZnO) nanoparticles. The emitters exhibit bright broadband fluorescence in the red spectral range centered at 640 nm with polarized excitation and emission. The studied emitters showed continuous blinking, however, bleaching can be suppressed using a polymethyl methacrylate (PMMA) coating. Furthermore, hydrogen termination increased the density of single photon emitters. Our results will contribute to the identification of quantum systems in ZnO.

cond-mat.mtrl-sci↗

arXiv2014

Synthesis of Luminescent Eu defects in diamond

Lanthanides are vital components in lighting, imaging technologies and future quantum memory applications due to their narrow optical transitions and long spin coherence times. Recently, diamond has become a preeminent platform for realization of many experiments in quantum information science. In this work, we demonstrate a promising approach to incorporate Eu ions into single crystal diamond and nanodiamonds, providing a means to harness the exceptional characteristics of both lanthanides and diamond in a single material. Polyelectrolytes are used to electrostatically assemble Eu(III) chelate molecules on diamond and subsequently chemical vapor deposition is employed for the growth of a high quality diamond crystal. Photoluminescence, cathodoluminescence and time resolved fluorescence measurements show that the Eu atoms retain the characteristic optical signature of Eu(III) upon incorporation into the diamond lattice. Computational modelling supports the experimental findings, corroborating that Eu3+ in diamond is a stable configuration within the diamond bandgap. The versatility of the synthetic technique is further illustrated through the creation of the well-studied Cr defect center. Together these defect centers demonstrate the outstanding chemical control over the incorporation of impurities into diamond enabled by the electrostatic assembly together with chemical vapour deposition growth.

cond-mat.mtrl-sci↗

arXiv2013

Silicon-Vacancy Color Centers in Nanodiamonds: Cathodoluminescence Imaging Marker in the Near Infrared

We demonstrate that nanodiamonds fabricated to incorporate silicon-vacancy (Si-V) color centers provide bright, spectrally narrow, and stable cathodoluminescence (CL) in the near-infrared. Si-V color centers containing nanodiamonds are promising as non-bleaching optical markers for correlated CL and secondary electron microscopy, including applications to nanoscale bioimaging.

cond-mat.mtrl-sci↗