arXiv subjects

Jianhao Zhang

Publications and source records attributed to Jianhao Zhang.

At least 37 records · Page 2Linked to original sources

arXiv2021

An electro-optically tunable microring laser monolithically integrated on lithium niobate on insulator

We demonstrate monolithic integration of an electro-optically (EO) tunable microring laser on lithium niobate on insulator (LNOI) platform. The device is fabricated by photolithography assisted chemo-mechanical etching (PLACE), and the pump laser is evanescently coupled into the erbium (Er3+) doped LN microring laser using an undoped LN waveguide mounted above the microring. The quality factor of the LN microring resonator is measured as high as 1.54x10^5 at the wavelength of 1542 nm. Lasing action can be observed at a pump power threshold below 3.5 mW using a 980 nm continuous-wave pump laser. Finally, tuning of the laser wavelength is achieved by varying the electric voltage on the microelectrodes fabricated in the vicinity of microring waveguide, showing an EO coefficient of 0.33 pm/V.

physics.optics↗

arXiv2021

On-chip integrated waveguide amplifiers on Erbium-doped thin film lithium niobate on insulator

We demonstrate on-chip light amplification with integrated optical waveguide fabricated on erbium-doped thin film lithium niobate on insulator (TFLNOI) using the photolithography assisted chemo-mechanical etching (PLACE) technique. A maximum internal net gain of 18 dB in the small-signal-gain regime is measured at the peak emission wavelength of 1530 nm for a waveguide length of 3.6 cm, indicating a differential gain per unit length of 5 dB/cm. This work paves the way to the monolithic integration of diverse active and passive photonic components on the TFLNOI platform.

physics.optics↗

arXiv2020

An on-chip tunable micro-disk laser fabricated on Er3+ doped lithium niobate on insulator (LNOI)

We demonstrate a C-band wavelength-tunable microlaser with an Er3+ doped high quality (~1.02x10^6) lithium niobate microdisk resonator. With a 976 nm continuous-wave pump laser, lasing action can be observed at a pump power threshold as low as ~250 μW at room temperature. Furthermore, the microdisk laser wavelength can be tuned by varying the pump laser power, showing a tuning efficiency of ~-17.03 pm/mW at low pump power blow 13 mW, and 10.58 pm/mW at high pump power above 13 mW.

physics.optics↗

arXiv2020

Polygon Coherent Modes in aWeakly Perturbed Whispering Gallery Microresonator for Efficient Second Harmonic, Optomechanic and Frequency Comb Generations

We observe high optical quality factor (Q) polygonal and star coherent optical modes in a lithium niobate microdisk. In contrast to the previous polygon modes achieved by deformed microcavities at lower mechanical and optical Q, we adopted weak perturbation from a tapered fiber for the polygon mode formation. The resulting high intracavity optical power of the polygon modes triggers second harmonic generation at high efficiency. With the combined advantage of high mechanical Q cavity optomechanical oscillation was observed for the first time. Finally, we observe frequency microcomb generation from the polygon modes with an ultra stable taper-on-disk coupling mechanism.

physics.optics↗

arXiv2020

High-index-contrast single-mode optical waveguides fabricated on lithium niobate by photolithography assisted chemo-mechanical etching (PLACE)

We report fabrication of low loss single mode waveguides on lithium niobate on insulator (LNOI) cladded by a layer of SiO2. Our technique, termed photolithography assisted chemo-mechanical etching (PLACE), relies on patterning of a chromium film into the mask shape by femtosecond laser micromachining and subsequent chemo-mechanical etching of the lithium niobate thin film. The high-index-contrast single mode waveguide is measured to have a propagation loss of 0.13 dB/cm. Furthermore, waveguide tapers are fabricated for boosting the coupling efficiency.

physics.app-ph↗

arXiv2019

Efficient Electro-optical Tuning of Optical Frequency Microcomb on a Monolithically Integrated High-Q Lithium Niobate Microdisk

We demonstrate efficient tuning of a monolithically integrated lithium niobate microdisk (LN) optical frequency microcomb. Utilizing the high optical quality (Q) factor (i.e., Q~7.1*10^6) of the microdisk, the microcomb spans over a spectral bandwidth of ~200 nm at a pump power as low as 20.4 mW. Combining the large eletro-optic coefficient of LN and optimum design of the geometry of microelectrodes, we demonstrate electro-optical tuning of the comb with a spectral range of 400 pm and a tuning efficiency of ~38 pm/100V.

physics.optics↗

arXiv2019

daBNN: A Super Fast Inference Framework for Binary Neural Networks on ARM devices

It is always well believed that Binary Neural Networks (BNNs) could drastically accelerate the inference efficiency by replacing the arithmetic operations in float-valued Deep Neural Networks (DNNs) with bit-wise operations. Nevertheless, there has not been open-source implementation in support of this idea on low-end ARM devices (e.g., mobile phones and embedded devices). In this work, we propose daBNN --- a super fast inference framework that implements BNNs on ARM devices. Several speed-up and memory refinement strategies for bit-packing, binarized convolution, and memory layout are uniquely devised to enhance inference efficiency. Compared to the recent open-source BNN inference framework, BMXNet, our daBNN is $7\times$$\sim$$23\times$ faster on a single binary convolution, and about $6\times$ faster on Bi-Real Net 18 (a BNN variant of ResNet-18). The daBNN is a BSD-licensed inference framework, and its source code, sample projects and pre-trained models are available on-line: https://github.com/JDAI-CV/dabnn.

cs.CV↗

arXiv2019

Trimming and ultra-wide bandwidth expansion of silicon frequency comb spectra with self-adaptive boundary waveguides

Dispersion engineering is among the most important steps towards a promising optical frequency comb. We propose a new and general approach to trim frequency combs using a self-adaptive boundary of the optical mode at different wavelengths in a sub-wavelength structured waveguide. The feasibility of ultra-wide bandwidth dispersion engineering comes from the fact that light at different wavelengths automatically self-adapts to slightly different effective spatial spans determined by the effective indices of the mode. Using this self-adaptive variation on the confinement, we open up the window of low-anomalous dispersion in a large wavelength range, and theoretically demonstrate frequency combs with improved bandwidths with respect to the state-of-art in several different waveguide configurations considered, for a matter of illustration, in the silicon photonic platform. This strategy opens up a new design space for trimming the spectrum of frequency combs using high-index-contrast platforms and provides benefit to various versatile nonlinear applications in which the manipulation of energy spacing and phase matching are pivotal.

physics.optics↗

arXiv2019

Fabrication of a multifunctional photonic integrated chip on lithium niobate on insulator using femtosecond laser assisted chemo-mechanical polish

We report fabrication of a multifunctional photonic integrated chip on lithium niobate on insulate (LNOI), which is achieved by femtosecond laser assisted chemo-mechanical polish. We demonstrate a high extinction ratio beam splitter, a 1 * 6 optical switch, and a balanced 3 * 3 interferometer on the fabricated chip by reconfiguring the microelectrode array integrated with the multifunctional photonic circuit.

physics.app-ph↗

arXiv2019

High-precision measurement of a propagation loss of single-mode optical waveguides on lithium niobate on insulator

We demonstrate fabrication of single-mode optical waveguides on lithium niobate on insulator (LNOI) by optical patterning combined with chemo-mechanical polishing. The fabricated LNOI waveguides have a nearly symmetric mode profile of a mode field size of ~2.5 micron (full-width at half maximum). We develop a high-precision measurement approach by which the single mode waveguides are characterized to have a propagation loss of ~0.042 dB/cm.

physics.app-ph↗

arXiv2019

Self-adaptive waveguide boundary for wideband multi-mode four-wave mixing

We propose a new approach to provide wideband multi-mode four-wave mixing, independent of the intrinsic waveguide dispersion. We adopt concepts from quantum mechanics and sub-wavelength engineering to design an effective photon well, with a graded potential along the waveguide cross section, that provides flexible control over the mode confinement. The self-adaptive nature of the waveguide boundary allows different spatial modes with equi-spaced frequencies and shared propagation wavevector, automatically fulfilling both, energy conservation and wavevector phase matching conditions. Capitalizing on this concept, we show phase-matching among modes separated by 400 nm (bridging from telecom wavelengths to almost 2μm), with less than 5% deviation in a remarkably large bandwidth exceeding 300 nm. Furthermore, we also show the flexibility of the proposed approach that can be seamlessly adapted to different technology platforms with the same or different waveguide thicknesses. This strategy opens a new design space for versatile nonlinear applications in which the manipulation of energy spacing and phase matching is pivotal, e.g. all-optical signal processing with four-wave mixing, mid-infrared light generation, Brillouin scattering with selectable phonon energy, etc.

physics.optics↗

arXiv2018

Real-time Electrical Tuning of an Optical Spring on a Monolithically Integrated Ultrahigh Q Lithium Nibote Microresonator

Cavity optomechanics, the study of the interplay between light and mechanical properties of matter, has triggered a wide range of groundbreaking researches from cavity quantum electrodynamics, label free single molecule detection to the creation of phonon laser. Using femtosecond laser direct writing followed by chemo-mechanical polishing, here we report an ultrahigh quality (Q~10^7) factor lithium niobate (LN) whispering gallery microresonator monolithically integrated with in-plane microelectrodes. Coherent regenerative optomechanical oscillation with an effective mechanical quality (Qm) factor as high as 2.86*10^8 is observed in air. We demonstrate real-time electrical tuning of the optomechanical frequency with an electro-mechanical tuning efficiency around -134 kHz/100V.

physics.optics↗

arXiv2018

Low-loss Lithium Niobate on Insulator (LNOI) Waveguides of a 10 cm-length and a Sub-nanometer Surface Roughness

We develop a technique for realizing lithium niobate on insulator (LNOI) waveguides of a multi-centimeter-length with a propagation loss as low as 0.027 dB/cm. Our technique relies on patterning a chromium (Cr) thin film coated on the top surface of LNOI into a hard mask with a femtosecond laser followed by the chemo-mechanical polishing for structuring the LNOI into the waveguides. The surface roughness on the waveguides is determined to be 0.452 nm with an atomic force microscope (AFM). The approach is compatible with other surface patterning technologies such as optical and electron beam lithographies or laser direct writing, enabling high-throughput manufacturing of large-scale LNOI-based photonic integrated circuits.

physics.app-ph↗

arXiv2018

Highly-efficient second and third harmonic generation in a monocrystalline lithium niobate microresonator

Nonlinear optics in whispering-gallery-mode (WGM) microresonators have attracted much attention. Owing to strong confinement of the light in a small volume, a WGM microresonator can dramatically boost the strength of light field, giving rise to enhancement of the nonlinear interactions of light with the resonator material. Here, we demonstrate highly efficient second harmonic generation (SHG) and third harmonic generation (THG) in an on-chip monocrystalline lithium niobate (LN) microresonator. Benefitting from a cyclic phase matching scheme for the transverse-electric WGMs, nonlinear wavelength conversion utilizing the largest second-order nonlinear coefficient d33, which has not been demonstrated until now despite of its obvious advantage, is successfully achieved in an X-cut LN microresonator. We obtain high conversion efficiencies in not only the SHG (3.8% mW^-1) but also the THG (0.3% mW^-2) realized through a cascaded sum-frequency process. Our results represent a major step toward the classical and quantum photonic integrated circuits.

physics.app-ph↗

arXiv2018

Generating Fano Resonances in a single-waveguide nanobeam cavity for efficient electro-optical modulation

We propose a method for generating Fano resonance in a standalone silicon nanobeam cavity which eliminates the inconvenience from the unexpected side-coupled bus waveguide and unlocks new opportunities to develop ultra-compact and ultra-fast electro-optical modulators.. Taking advantage from a spatial-division multiplexing principle of operation between transverse electric modes, a sharp resonant mode and an efficient flat background mode are simultaneously generated in the same silicon channel for the realization of efficient Fano resonances. Unambiguous asymmetric spectrum lineshapes are thoroughly investigated using numerical and analytical methods and experimentally demonstrated in the near infra-red around lambda=1.55μm, presenting an extinction ratio of about 17dB for a delta lambda =56 pm wavelength detuning for the 1st cavity mode (Q-factor Q=34000), and higher than 23 dB extinction ratio for a delta lambda=366 pm detuning for the 2nd cavity mode (Q=5600). These extinction ratios are 10~15 dB larger than their Lorentzian counterparts exhibiting similar Q factors. Silicon Fano modulation based on plasma dispersion effect is proposed, for which an energy consumption as low as few fJ/bit is estimated. Fano cavity scheme addressed in this paper presents a great potential for low power consumption silicon optical modulators and provides anew insight to the advantages of Fano resonances for optical modulation schemes.

physics.optics↗

arXiv2018

Lithium niobate micro-disk resonators of quality factors above 10^7

We report on fabrication of crystalline lithium niobate microresonators with quality factors above 10^7 as measured around 770 nm wavelength. Our technique relies on femtosecond laser micromachining for patterning a mask coated on the lithium niobate on insulate (LNOI) into a microdisk, followed by a chemo-mechanical polishing process for transferring the disk-shaped pattern to the LNOI. Nonlinear processes including second harmonic generation and Raman scattering have been demonstrated in the fabricated microdisk.

physics.app-ph↗

arXiv2018

Simultaneous generation of four-wave mixing and stimulated Raman scattering in coupled lithium niobate microdisks mediated by second harmonic generation

High quality lithium niobate thin film microresonators provide an ideal platform for on-chip nonlinear optics applications. However, the phase matching condition for efficient parametric process sets a high requirement for fabrication control. Here we demonstrate a photonic molecular structure composed of two strongly coupled lithium niobate microdisks of different diameters fabricated using femtosecond laser micromachining and focused ion beam milling. With a continuous wave excitation, rich nonlinear optical processes including cascaded four-wave mixing and stimulated Raman scattering were observed around the second harmonic wavelength. Our results indicate that the coupled microdisks form a superior system for nonlinear optical process.

physics.optics↗

arXiv2018

Laser guided ionic wind

We report on a method to experimentally generate ionic wind by coupling an external high voltage electric field with an intense femtosecond laser induced air plasma filament. The measured ionic wind velocity could be as strong as >4 m/s. It could be optimized by changing the applied electric field and the laser induced plasma channel. The experimental observation was qualitatively confirmed by a numerical simulation of spatial distribution of the electric field. This technique is robust and free from sharp metallic electrodes for coronas; it opens a way to optically generate ionic wind at a distance.

physics.plasm-ph↗