arXiv subjects

Jiuming Liu

Publications and source records attributed to Jiuming Liu.

At least 37 records · Page 2Linked to original sources

arXiv2025

GRS-SLAM3R: Real-Time Dense SLAM with Gated Recurrent State

DUSt3R-based end-to-end scene reconstruction has recently shown promising results in dense visual SLAM. However, most existing methods only use image pairs to estimate pointmaps, overlooking spatial memory and global consistency.To this end, we introduce GRS-SLAM3R, an end-to-end SLAM framework for dense scene reconstruction and pose estimation from RGB images without any prior knowledge of the scene or camera parameters. Unlike existing DUSt3R-based frameworks, which operate on all image pairs and predict per-pair point maps in local coordinate frames, our method supports sequentialized input and incrementally estimates metric-scale point clouds in the global coordinate. In order to improve consistent spatial correlation, we use a latent state for spatial memory and design a transformer-based gated update module to reset and update the spatial memory that continuously aggregates and tracks relevant 3D information across frames. Furthermore, we partition the scene into submaps, apply local alignment within each submap, and register all submaps into a common world frame using relative constraints, producing a globally consistent map. Experiments on various datasets show that our framework achieves superior reconstruction accuracy while maintaining real-time performance.

cs.CV↗

arXiv2025

DVLO4D: Deep Visual-Lidar Odometry with Sparse Spatial-temporal Fusion

Visual-LiDAR odometry is a critical component for autonomous system localization, yet achieving high accuracy and strong robustness remains a challenge. Traditional approaches commonly struggle with sensor misalignment, fail to fully leverage temporal information, and require extensive manual tuning to handle diverse sensor configurations. To address these problems, we introduce DVLO4D, a novel visual-LiDAR odometry framework that leverages sparse spatial-temporal fusion to enhance accuracy and robustness. Our approach proposes three key innovations: (1) Sparse Query Fusion, which utilizes sparse LiDAR queries for effective multi-modal data fusion; (2) a Temporal Interaction and Update module that integrates temporally-predicted positions with current frame data, providing better initialization values for pose estimation and enhancing model's robustness against accumulative errors; and (3) a Temporal Clip Training strategy combined with a Collective Average Loss mechanism that aggregates losses across multiple frames, enabling global optimization and reducing the scale drift over long sequences. Extensive experiments on the KITTI and Argoverse Odometry dataset demonstrate the superiority of our proposed DVLO4D, which achieves state-of-the-art performance in terms of both pose accuracy and robustness. Additionally, our method has high efficiency, with an inference time of 82 ms, possessing the potential for the real-time deployment.

cs.CV↗

arXiv2025

TopoLiDM: Topology-Aware LiDAR Diffusion Models for Interpretable and Realistic LiDAR Point Cloud Generation

LiDAR scene generation is critical for mitigating real-world LiDAR data collection costs and enhancing the robustness of downstream perception tasks in autonomous driving. However, existing methods commonly struggle to capture geometric realism and global topological consistency. Recent LiDAR Diffusion Models (LiDMs) predominantly embed LiDAR points into the latent space for improved generation efficiency, which limits their interpretable ability to model detailed geometric structures and preserve global topological consistency. To address these challenges, we propose TopoLiDM, a novel framework that integrates graph neural networks (GNNs) with diffusion models under topological regularization for high-fidelity LiDAR generation. Our approach first trains a topological-preserving VAE to extract latent graph representations by graph construction and multiple graph convolutional layers. Then we freeze the VAE and generate novel latent topological graphs through the latent diffusion models. We also introduce 0-dimensional persistent homology (PH) constraints, ensuring the generated LiDAR scenes adhere to real-world global topological structures. Extensive experiments on the KITTI-360 dataset demonstrate TopoLiDM's superiority over state-of-the-art methods, achieving improvements of 22.6% lower Frechet Range Image Distance (FRID) and 9.2% lower Minimum Matching Distance (MMD). Notably, our model also enables fast generation speed with an average inference time of 1.68 samples/s, showcasing its scalability for real-world applications. We will release the related codes at https://github.com/IRMVLab/TopoLiDM.

cs.CV↗

arXiv2025

SemGauss-SLAM: Dense Semantic Gaussian Splatting SLAM

We propose SemGauss-SLAM, a dense semantic SLAM system utilizing 3D Gaussian representation, that enables accurate 3D semantic mapping, robust camera tracking, and high-quality rendering simultaneously. In this system, we incorporate semantic feature embedding into 3D Gaussian representation, which effectively encodes semantic information within the spatial layout of the environment for precise semantic scene representation. Furthermore, we propose feature-level loss for updating 3D Gaussian representation, enabling higher-level guidance for 3D Gaussian optimization. In addition, to reduce cumulative drift in tracking and improve semantic reconstruction accuracy, we introduce semantic-informed bundle adjustment. By leveraging multi-frame semantic associations, this strategy enables joint optimization of 3D Gaussian representation and camera poses, resulting in low-drift tracking and accurate semantic mapping. Our SemGauss-SLAM demonstrates superior performance over existing radiance field-based SLAM methods in terms of mapping and tracking accuracy on Replica and ScanNet datasets, while also showing excellent capabilities in high-precision semantic segmentation and dense semantic mapping.

cs.RO↗

arXiv2025

Shubnikov-de Haas quantum oscillations with large spin splitting in highmobility Al0.8Ga0.2Sb/InAs/ Al0.8Ga0.2Sb quantum-well heterostructures

We report the epitaxial growth of high-quality Al0.8Ga0.2Sb-InAs-Al0.8Ga0.2Sb quantum well films featured by high carrier mobility and strong spin-orbit coupling. By appropriately optimizing the Al-to-Ga ratio in the AlGaSb barrier layer, the quantum confinement of the heterostructure is significantlyenhanced, which results in both an ultra-high electron mobility of 924000 cm2/Vs and a giant magnetoresistance ratio of 365000 at low temperatures. Meanwhile, pronounced Shubnikov-deHaas quantum oscillations persist up to 30 K, and their single-frequency feature indicates a well defined Fermi surface without subband mixing in the two-dimensional electron gas channel. Moreover, the large effective g-factor of 12.93 leads to the observation of Zeeman splitting at large magnetic fields. Our results validate the AlGaSb/InAs quantum well heterostructures as a suitable candidate for constructing energy-efficient topological spintronic devices.

cond-mat.mes-hall↗

arXiv2025

MAMBA4D: Efficient Long-Sequence Point Cloud Video Understanding with Disentangled Spatial-Temporal State Space Models

Point cloud videos can faithfully capture real-world spatial geometries and temporal dynamics, which are essential for enabling intelligent agents to understand the dynamically changing world. However, designing an effective 4D backbone remains challenging, mainly due to the irregular and unordered distribution of points and temporal inconsistencies across frames. Also, recent transformer-based 4D backbones commonly suffer from large computational costs due to their quadratic complexity, particularly for long video sequences. To address these challenges, we propose a novel point cloud video understanding backbone purely based on the State Space Models (SSMs). Specifically, we first disentangle space and time in 4D video sequences and then establish the spatio-temporal correlation with our designed Mamba blocks. The Intra-frame Spatial Mamba module is developed to encode locally similar geometric structures within a certain temporal stride. Subsequently, locally correlated tokens are delivered to the Inter-frame Temporal Mamba module, which integrates long-term point features across the entire video with linear complexity. Our proposed Mamba4d achieves competitive performance on the MSR-Action3D action recognition (+10.4% accuracy), HOI4D action segmentation (+0.7 F1 Score), and Synthia4D semantic segmentation (+0.19 mIoU) datasets. Especially, for long video sequences, our method has a significant efficiency improvement with 87.5% GPU memory reduction and 5.36 times speed-up. Codes will be released at https://github.com/IRMVLab/Mamba4D.

cs.CV↗

arXiv2024

EADReg: Probabilistic Correspondence Generation with Efficient Autoregressive Diffusion Model for Outdoor Point Cloud Registration

Diffusion models have shown the great potential in the point cloud registration (PCR) task, especially for enhancing the robustness to challenging cases. However, existing diffusion-based PCR methods primarily focus on instance-level scenarios and struggle with outdoor LiDAR points, where the sparsity, irregularity, and huge point scale inherent in LiDAR points pose challenges to establishing dense global point-to-point correspondences. To address this issue, we propose a novel framework named EADReg for efficient and robust registration of LiDAR point clouds based on autoregressive diffusion models. EADReg follows a coarse-to-fine registration paradigm. In the coarse stage, we employ a Bi-directional Gaussian Mixture Model (BGMM) to reject outlier points and obtain purified point cloud pairs. BGMM establishes correspondences between the Gaussian Mixture Models (GMMs) from the source and target frames, enabling reliable coarse registration based on filtered features and geometric information. In the fine stage, we treat diffusion-based PCR as an autoregressive process to generate robust point correspondences, which are then iteratively refined on upper layers. Despite common criticisms of diffusion-based methods regarding inference speed, EADReg achieves runtime comparable to convolutional-based methods. Extensive experiments on the KITTI and NuScenes benchmark datasets highlight the state-of-the-art performance of our proposed method. Codes will be released upon publication.

cs.CV↗

arXiv2024

Spherical Frustum Sparse Convolution Network for LiDAR Point Cloud Semantic Segmentation

LiDAR point cloud semantic segmentation enables the robots to obtain fine-grained semantic information of the surrounding environment. Recently, many works project the point cloud onto the 2D image and adopt the 2D Convolutional Neural Networks (CNNs) or vision transformer for LiDAR point cloud semantic segmentation. However, since more than one point can be projected onto the same 2D position but only one point can be preserved, the previous 2D image-based segmentation methods suffer from inevitable quantized information loss. To avoid quantized information loss, in this paper, we propose a novel spherical frustum structure. The points projected onto the same 2D position are preserved in the spherical frustums. Moreover, we propose a memory-efficient hash-based representation of spherical frustums. Through the hash-based representation, we propose the Spherical Frustum sparse Convolution (SFC) and Frustum Fast Point Sampling (F2PS) to convolve and sample the points stored in spherical frustums respectively. Finally, we present the Spherical Frustum sparse Convolution Network (SFCNet) to adopt 2D CNNs for LiDAR point cloud semantic segmentation without quantized information loss. Extensive experiments on the SemanticKITTI and nuScenes datasets demonstrate that our SFCNet outperforms the 2D image-based semantic segmentation methods based on conventional spherical projection. Codes will be available at https://github.com/IRMVLab/SFCNet.

cs.CV↗

arXiv2024

Electrical detection in two-terminal perpendicularly magnetized devices via geometric anomalous Nernst effect

The non-uniform current distribution arisen from either current crowding effect or hot spot effect provides a method to tailor the interaction between thermal gradient and electron transport in magnetically ordered systems. Here we apply the device structural engineering to realize an in-plane inhomogeneous temperature distribution within the conduction channel, and the resulting geometric anomalous Nernst effect (GANE) gives rise to a non-zero 2nd -harmonic resistance whose polarity corresponds to the out-of-plane magnetization of Co/Pt multi-layer thin film, and its amplitude is linearly proportional to the applied current. By optimizing the aspect ratio of convex-shaped device, the effective temperature gradient can reach up to 0.3 K/$μ$m along the y-direction, leading to a GANE signal of 28.3 $μ$V. Moreover, we demonstrate electrical write and read operations in the perpendicularly-magnetized Co/Pt-based spin-orbit torque device with a simple two-terminal structure. Our results unveil a new pathway to utilize thermoelectric effects for constructing high-density magnetic memories

cond-mat.mes-hall↗

arXiv2024

Tunable interfacial Rashba spin-orbit coupling in asymmetric Al$_x$In$_{1-x}$Sb/InSb/CdTe quantum well heterostructures

The manipulation of Rashba-type spin-orbit coupling (SOC) in molecular beam epitaxy-grown Al$_x$In$_{1-x}$Sb/InSb/CdTe quantum well heterostructures is reported. The effective band bending provides robust two-dimensional quantum confinement, while the unidirectional built-in electric field from the asymmetric hetero-interfaces results in pronounced Rashba SOC strength. By tuning the Al concentration in the top Al$_x$In$_{1-x}$Sb barrier layer, the optimal structure with $x = 0.15$ shows the largest Rashba coefficient of 0.23 eV-Angstrom. and the highest low-temperature electron mobility of 4400 cm$^2$/Vs . Quantitative investigations of the weak anti-localization effect further confirm the dominant D'yakonov-Perel (DP) spin relaxation mechanism during charge-to-spin conversion. These findings highlight the significance of quantum well engineering in shaping magneto-resistance responses, and narrow bandgap semiconductor-based heterostructures may offer a reliable platform for energy-efficient spintronic applications.

cond-mat.mtrl-sci↗

arXiv2024

DVLO: Deep Visual-LiDAR Odometry with Local-to-Global Feature Fusion and Bi-Directional Structure Alignment

Information inside visual and LiDAR data is well complementary derived from the fine-grained texture of images and massive geometric information in point clouds. However, it remains challenging to explore effective visual-LiDAR fusion, mainly due to the intrinsic data structure inconsistency between two modalities: Image pixels are regular and dense, but LiDAR points are unordered and sparse. To address the problem, we propose a local-to-global fusion network (DVLO) with bi-directional structure alignment. To obtain locally fused features, we project points onto the image plane as cluster centers and cluster image pixels around each center. Image pixels are pre-organized as pseudo points for image-to-point structure alignment. Then, we convert points to pseudo images by cylindrical projection (point-to-image structure alignment) and perform adaptive global feature fusion between point features and local fused features. Our method achieves state-of-the-art performance on KITTI odometry and FlyingThings3D scene flow datasets compared to both single-modal and multi-modal methods. Codes are released at https://github.com/IRMVLab/DVLO.

cs.CV↗

arXiv2024

NeuroGauss4D-PCI: 4D Neural Fields and Gaussian Deformation Fields for Point Cloud Interpolation

Point Cloud Interpolation confronts challenges from point sparsity, complex spatiotemporal dynamics, and the difficulty of deriving complete 3D point clouds from sparse temporal information. This paper presents NeuroGauss4D-PCI, which excels at modeling complex non-rigid deformations across varied dynamic scenes. The method begins with an iterative Gaussian cloud soft clustering module, offering structured temporal point cloud representations. The proposed temporal radial basis function Gaussian residual utilizes Gaussian parameter interpolation over time, enabling smooth parameter transitions and capturing temporal residuals of Gaussian distributions. Additionally, a 4D Gaussian deformation field tracks the evolution of these parameters, creating continuous spatiotemporal deformation fields. A 4D neural field transforms low-dimensional spatiotemporal coordinates ($x,y,z,t$) into a high-dimensional latent space. Finally, we adaptively and efficiently fuse the latent features from neural fields and the geometric features from Gaussian deformation fields. NeuroGauss4D-PCI outperforms existing methods in point cloud frame interpolation, delivering leading performance on both object-level (DHB) and large-scale autonomous driving datasets (NL-Drive), with scalability to auto-labeling and point cloud densification tasks. The source code is released at https://github.com/jiangchaokang/NeuroGauss4D-PCI.

cs.CV↗

arXiv2024

DifFlow3D: Toward Robust Uncertainty-Aware Scene Flow Estimation with Diffusion Model

Scene flow estimation, which aims to predict per-point 3D displacements of dynamic scenes, is a fundamental task in the computer vision field. However, previous works commonly suffer from unreliable correlation caused by locally constrained searching ranges, and struggle with accumulated inaccuracy arising from the coarse-to-fine structure. To alleviate these problems, we propose a novel uncertainty-aware scene flow estimation network (DifFlow3D) with the diffusion probabilistic model. Iterative diffusion-based refinement is designed to enhance the correlation robustness and resilience to challenging cases, e.g. dynamics, noisy inputs, repetitive patterns, etc. To restrain the generation diversity, three key flow-related features are leveraged as conditions in our diffusion model. Furthermore, we also develop an uncertainty estimation module within diffusion to evaluate the reliability of estimated scene flow. Our DifFlow3D achieves state-of-the-art performance, with 24.0% and 29.1% EPE3D reduction respectively on FlyingThings3D and KITTI 2015 datasets. Notably, our method achieves an unprecedented millimeter-level accuracy (0.0078m in EPE3D) on the KITTI dataset. Additionally, our diffusion-based refinement paradigm can be readily integrated as a plug-and-play module into existing scene flow networks, significantly increasing their estimation accuracy. Codes are released at https://github.com/IRMVLab/DifFlow3D.

cs.CV↗

arXiv2024

SNI-SLAM: Semantic Neural Implicit SLAM

We propose SNI-SLAM, a semantic SLAM system utilizing neural implicit representation, that simultaneously performs accurate semantic mapping, high-quality surface reconstruction, and robust camera tracking. In this system, we introduce hierarchical semantic representation to allow multi-level semantic comprehension for top-down structured semantic mapping of the scene. In addition, to fully utilize the correlation between multiple attributes of the environment, we integrate appearance, geometry and semantic features through cross-attention for feature collaboration. This strategy enables a more multifaceted understanding of the environment, thereby allowing SNI-SLAM to remain robust even when single attribute is defective. Then, we design an internal fusion-based decoder to obtain semantic, RGB, Truncated Signed Distance Field (TSDF) values from multi-level features for accurate decoding. Furthermore, we propose a feature loss to update the scene representation at the feature level. Compared with low-level losses such as RGB loss and depth loss, our feature loss is capable of guiding the network optimization on a higher-level. Our SNI-SLAM method demonstrates superior performance over all recent NeRF-based SLAM methods in terms of mapping and tracking accuracy on Replica and ScanNet datasets, while also showing excellent capabilities in accurate semantic segmentation and real-time semantic mapping.

cs.RO↗

arXiv2024

Point Mamba: A Novel Point Cloud Backbone Based on State Space Model with Octree-Based Ordering Strategy

Recently, state space model (SSM) has gained great attention due to its promising performance, linear complexity, and long sequence modeling ability in both language and image domains. However, it is non-trivial to extend SSM to the point cloud field, because of the causality requirement of SSM and the disorder and irregularity nature of point clouds. In this paper, we propose a novel SSM-based point cloud processing backbone, named Point Mamba, with a causality-aware ordering mechanism. To construct the causal dependency relationship, we design an octree-based ordering strategy on raw irregular points, globally sorting points in a z-order sequence and also retaining their spatial proximity. Our method achieves state-of-the-art performance compared with transformer-based counterparts, with 93.4% accuracy and 75.7 mIOU respectively on the ModelNet40 classification dataset and ScanNet semantic segmentation dataset. Furthermore, our Point Mamba has linear complexity, which is more efficient than transformer-based methods. Our method demonstrates the great potential that SSM can serve as a generic backbone in point cloud understanding. Codes are released at https://github.com/IRMVLab/Point-Mamba.

cs.CV↗

arXiv2024

3DSFLabelling: Boosting 3D Scene Flow Estimation by Pseudo Auto-labelling

Learning 3D scene flow from LiDAR point clouds presents significant difficulties, including poor generalization from synthetic datasets to real scenes, scarcity of real-world 3D labels, and poor performance on real sparse LiDAR point clouds. We present a novel approach from the perspective of auto-labelling, aiming to generate a large number of 3D scene flow pseudo labels for real-world LiDAR point clouds. Specifically, we employ the assumption of rigid body motion to simulate potential object-level rigid movements in autonomous driving scenarios. By updating different motion attributes for multiple anchor boxes, the rigid motion decomposition is obtained for the whole scene. Furthermore, we developed a novel 3D scene flow data augmentation method for global and local motion. By perfectly synthesizing target point clouds based on augmented motion parameters, we easily obtain lots of 3D scene flow labels in point clouds highly consistent with real scenarios. On multiple real-world datasets including LiDAR KITTI, nuScenes, and Argoverse, our method outperforms all previous supervised and unsupervised methods without requiring manual labelling. Impressively, our method achieves a tenfold reduction in EPE3D metric on the LiDAR KITTI dataset, reducing it from $0.190m$ to a mere $0.008m$ error.

cs.CV↗

arXiv2023

Interplay between moment-dependent and field-driven unidirectional magnetoresistance in CoFeB/InSb/CdTe heterostructures

Magnetoresistance effects are crucial for understanding the charge/spin transport as well as propelling the advancement of spintronic applications. Here we report the coexistence of magnetic moment-dependent (MD) and magnetic field-driven (FD) unidirectional magnetoresistance (UMR) effects in CoFeB/InSb/CdTe heterostructures. The strong spin-orbital coupling of InSb and the matched impedance at the CoFeB/InSb interface warrant a distinct MD-UMR effect at room temperature, while the interaction between the in-plane magnetic field and the Rashba effect at the InSb/CdTe interface induces the marked FD-UMR signal that dominates the high-field region. Moreover, owning to the different spin transport mechanisms, these two types of nonreciprocal charge transport show opposite polarities with respect to the magnetic field direction, which further enable an effective phase modulation of the angular-dependent magnetoresistance. Besides, the demonstrations of both the tunable UMR response and two-terminal spin-orbit torque-driven magnetization switching validate our CoFeB/InSb/CdTe system as a suitable integrated building block for multifunctional spintronic device design.

physics.app-ph↗

arXiv2023

SC-NeRF: Self-Correcting Neural Radiance Field with Sparse Views

In recent studies, the generalization of neural radiance fields for novel view synthesis task has been widely explored. However, existing methods are limited to objects and indoor scenes. In this work, we extend the generalization task to outdoor scenes, trained only on object-level datasets. This approach presents two challenges. Firstly, the significant distributional shift between training and testing scenes leads to black artifacts in rendering results. Secondly, viewpoint changes in outdoor scenes cause ghosting or missing regions in rendered images. To address these challenges, we propose a geometric correction module and an appearance correction module based on multi-head attention mechanisms. We normalize rendered depth and combine it with light direction as query in the attention mechanism. Our network effectively corrects varying scene structures and geometric features in outdoor scenes, generalizing well from object-level to unseen outdoor scenes. Additionally, we use appearance correction module to correct appearance features, preventing rendering artifacts like blank borders and ghosting due to viewpoint changes. By combining these modules, our approach successfully tackles the challenges of outdoor scene generalization, producing high-quality rendering results. When evaluated on four datasets (Blender, DTU, LLFF, Spaces), our network outperforms previous methods. Notably, compared to MVSNeRF, our network improves average PSNR from 19.369 to 25.989, SSIM from 0.838 to 0.889, and reduces LPIPS from 0.265 to 0.224 on Spaces outdoor scenes.

cs.CV↗