arXiv subjects

Kristof Moors

Publications and source records attributed to Kristof Moors.

At least 37 records · Page 2Linked to original sources

arXiv2024

Robust Majorana bound states in magnetic topological insulator nanoribbons with fragile chiral edge channels

Magnetic topological insulators in the quantum anomalous Hall regime host ballistic chiral edge channels. When proximitized by an $s$-wave superconductor, these edge states offer the potential for realizing topological superconductivity and Majorana bound states without the detrimental effect of large externally-applied magnetic fields on superconductivity. Realizing well-separated unpaired Majorana bound states requires magnetic topological insulator ribbons with a width of the order of the transverse extent of the edge state, however, which is expected to bring the required ribbon width down to around 100 nm. In this regime, it is known to be extremely difficult to retain the ballistic nature of chiral edge channels and realize a quantized Hall conductance. In this paper, we study the impact of disorder in such magnetic topological insulator nanoribbons and compare the fragility of ballistic chiral edge channels with the stability of Majorana bound states when the ribbon is covered by a superconducting film. We find that the Majorana bound states exhibit greater robustness against disorder than the underlying chiral edge channels.

cond-mat.mes-hall↗

arXiv2023

Conductance asymmetry in proximitized magnetic topological insulator junctions with Majorana modes

We theoretically discuss electronic transport via Majorana states in magnetic topological insulator-superconductor junctions with an asymmetric split of the applied bias voltage. We study normal-superconductor-normal (NSN) junctions made of narrow (wire-like) or wide (film-like) magnetic topological insulator slabs with a central proximitized superconducting sector. The occurrence of charge non-conserving Andreev processes entails a nonzero conductance related to an electric current flowing to ground from the proximitized sector of the NSN junction. We show that topologically-protected Majorana modes require an antisymmetry of this conductance with respect to the point of equally split bias voltage across the junction.

cond-mat.mes-hall↗

arXiv2023

Induced superconducting correlations in the quantum anomalous Hall insulator

Inducing Cooper pairing in a thin ferromagnetic topological insulator in the quantum anomalous Hall state (called quantum anomalous Hall insulator, QAHI) is a promising way to realize topological superconductivity with associated chiral Majorana edge states. However, finding evidence of superconducting proximity effect in a QAHI has proven to be a considerable challenge due to inherent experimental difficulties. Here we report the observation of crossed Andreev reflection (CAR) across a narrow superconducting Nb electrode contacting the chiral edge state of a QAHI, evinced by a negative nonlocal voltage measured downstream from the grounded Nb electrode. This is an unambiguous signature of induced superconducting pair correlation in the chiral edge state. Our theoretical analysis demonstrates that CAR processes of the chiral edge are not strongly dependent on the nature of the superconductivity that mediates them. Nevertheless, the characteristic length of the CAR process is found to be much longer than the superconducting correlation length in Nb, which suggests that the CAR is in fact mediated by superconductivity induced on the QAHI surface. The approach and results presented here provide a foundation for future studies of topological superconductivity and Majorana physics, as well as for the search for non-Abelian zero modes.

cond-mat.mes-hall↗

arXiv2023

Aharonov-Bohm interference and phase-coherent surface-state transport in topological insulator rings

We present low-temperature magnetotransport measurements on selectively-grown Sb$_2$Te$_3$-based topological insulator ring structures. These topological insulator ring geometries display clear Aharonov-Bohm oscillations in the conductance originating from phase-coherent transport around the ring. The temperature dependence of the oscillation amplitude indicates that the Aharonov-Bohm oscillations originate from ballistic transport along the ring arms. The oscillations can therefore be attributed to topological surface states, which can maintain a quasi-ballistic transport regime in the presence of disorder. Further insight on the phase coherence is gained by comparing with similar Aharonov-Bohm-type oscillations in topological insulator nanoribbons exposed to an axial magnetic field. Here, quasi-ballistic phase-coherent transport is confirmed for closed-loop topological surface states in transverse direction enclosing the cross-section of the nanoribbon. In contrast, the appearance of universal conductance fluctuations indicates phase-coherent transport in the diffuse regime, which is attributed to bulk carrier transport. Thus, it appears that even in the presence of diffusive $p$-type charge carriers in Aharonov-Bohm ring structures, phase-coherent quasi-ballistic transport of topologically protected surface states is maintained over long distances.

cond-mat.mes-hall↗

arXiv2023

Robust and fragile Majorana bound states in proximitized topological insulator nanoribbons

Topological insulator (TI) nanoribbons with proximity-induced superconductivity are a promising platform for Majorana bound states (MBSs). In this work, we consider a detailed modeling approach for a TI nanoribbon in contact with a superconductor via its top surface, which induces a superconducting gap in its surface-state spectrum. The system displays a rich phase diagram with different numbers of end-localized MBSs as a function of chemical potential and magnetic flux piercing the cross section of the ribbon. These MBSs can be robust or fragile upon consideration of electrostatic disorder. We simulate a tunneling spectroscopy setup to probe the different topological phases of top-proximitized TI nanoribbons. Our simulation results indicate that a top-proximitized TI nanoribbon is ideally suited for realizing fully gapped topological superconductivity, in particular when the Fermi level is pinned near the Dirac point. In this regime, the setup yields a single pair of MBSs, well separated at opposite ends of the proximitized ribbon, which gives rise to a robust quantized zero-bias conductance peak.

cond-mat.mes-hall↗

arXiv2022

First-principles-based screening method for resistivity scaling of anisotropic metals

The resistivity scaling of metals is a crucial limiting factor for further downscaling of interconnects in nanoelectronic devices that affects signal delay, heat production, and energy consumption. Here, we generalize a commonly considered figure of merit for selecting promising candidate metals with highly anisotropic Fermi surfaces in terms of their electronic transport properties at the nanoscale. For this, we introduce a finite-temperature transport tensor, based on band structures obtained from first principles. This transport tensor allows for a straightforward comparison between highly anisotropic metals in nanostructures with different lattice orientations and arbitrary transport directions. By evaluating the temperature dependence of the tensor components, we also assess the validity of a Fermi surface-based evaluation of the transport properties at zero temperature, rather than considering standard operating temperature conditions.

cond-mat.mtrl-sci↗

arXiv2022

Microwave Sensing of Andreev Bound States in a Gate-Defined Superconducting Quantum Point Contact

We use a superconducting microresonator as a cavity to sense absorption of microwaves by a superconducting quantum point contact defined by surface gates over a proximitized two-dimensional electron gas. Renormalization of the cavity frequency with phase difference across the point contact is consistent with adiabatic coupling to Andreev bound states. Near $π$ phase difference, we observe random fluctuations in absorption with gate voltage, related to quantum interference-induced modulations in the electron transmission. We identify features consistent with the presence of single Andreev bound states and describe the Andreev-cavity interaction using a dispersive Jaynes-Cummings model. By fitting the weak Andreev-cavity coupling, we extract ~GHz decoherence consistent with charge noise and the transmission dispersion associated with a localized state.

cond-mat.mes-hall↗

arXiv2022

Probing edge state conductance in ultra-thin topological insulator films

Quantum spin Hall (QSH) insulators have unique electronic properties, comprising a band gap in their two-dimensional interior and one-dimensional spin-polarized edge states in which current flows ballistically. In scanning tunneling microscopy (STM), the edge states manifest themselves as a localized density of states. However, there is a significant research gap between the observation of edge states in nanoscale spectroscopy, and the detection of ballistic transport in edge channels which typically relies on transport experiments with microscale lithographic contacts. Here, we study few-layer films of the three-dimensional topological insulator (Bi$_{x}$Sb$_{1-x})_2$Te$_3$, for which a topological transition to a two-dimensional topological QSH insulator phase has been proposed. Indeed, an edge state in the local density of states is observed within the band gap. Yet, in nanoscale transport experiments with a four-tip STM, 2 and 3 quintuple layer films do not exhibit a ballistic conductance in the edge channels. This demonstrates that the detection of edge states in spectroscopy can be misleading with regard to the identification of a QSH phase. In contrast, nanoscale multi-tip transport experiments are a robust method for effectively pinpointing ballistic edge channels, as opposed to trivial edge states, in quantum materials.

cond-mat.mes-hall↗

arXiv2022

Gate-induced decoupling of surface and bulk state properties in selectively-deposited Bi$_2$Te$_3$ nanoribbons

Three-dimensional topological insulators (TIs) host helical Dirac surface states at the interface with a trivial insulator. In quasi-one-dimensional TI nanoribbon structures the wave function of surface charges extends phase-coherently along the perimeter of the nanoribbon, resulting in a quantization of transverse surface modes. Furthermore, as the inherent spin-momentum locking results in a Berry phase offset of $π$ of self-interfering charge carriers an energy gap within the surface state dispersion appears and all states become spin-degenerate. We investigate and compare the magnetic field dependent surface state dispersion in selectively deposited Bi$_2$Te$_3$ TI micro- and nanoribbon structures by analysing the gate voltage dependent magnetoconductance at cryogenic temperatures. While in wide microribbon devices the field effect mainly changes the amount of bulk charges close to the top surface we identify coherent transverse surface states along the perimeter of the nanoribbon devices responding to a change in top gate potential. We quantify the energetic spacing in between these quantized transverse subbands by using an electrostatic model that treats an initial difference in charge carrier densities on the top and bottom surface as well as remaining bulk charges. In the gate voltage dependent transconductance we find oscillations that change their relative phase by $π$ at half-integer values of the magnetic flux quantum applied coaxial to the nanoribbon, which is a signature for a magnetic flux dependent topological phase transition in narrow, selectively deposited TI nanoribbon devices.

cond-mat.mes-hall↗

arXiv2021

In-plane magnetic field-driven symmetry breaking in topological insulator-based three-terminal junctions

Topological surface states of three-dimensional topological insulator nanoribbons and their distinct magnetoconductance properties are promising for topoelectronic applications and topological quantum computation. A crucial building block for nanoribbon-based circuits are three-terminal junctions. While the transport of topological surface states on a planar boundary is not directly affected by an in-plane magnetic field, the orbital effect cannot be neglected when the surface states are confined to the boundary of a nanoribbon geometry. Here, we report on the magnetotransport properties of such three-terminal junctions. We observe a dependence of the current on the in-plane magnetic field, with a distinct steering pattern of the surface state current towards a preferred output terminal for different magnetic field orientations. We demonstrate that this steering effect originates from the orbital effect, trapping the phase-coherent surface states in the different legs of the junction on opposite sides of the nanoribbon and breaking the left-right symmetry of the transmission across the junction. The reported magnetotransport properties demonstrate that an in-plane magnetic field is not only relevant but also very useful for the characterization and manipulation of transport in three-dimensional topological insulator nanoribbon-based junctions and circuits, acting as a topoelectric current switch.

cond-mat.mes-hall↗

arXiv2021

Ab initio screening of metallic MAX ceramics for advanced interconnect applications

The potential of a wide range of layered ternary carbide and nitride MAX phases as conductors in interconnect metal lines in advanced CMOS technology nodes has been evaluated using automated first principles simulations based on density functional theory. The resistivity scaling potential of these compounds, i.e. the sensitivity of their resistivity to reduced line dimensions, has been benchmarked against Cu and Ru by evaluating their transport properties within a semiclassical transport formalism. In addition, their cohesive energy has been assessed as a proxy for the resistance against electromigration and the need for diffusion barriers. The results indicate that numerous MAX phases show promise as conductors in interconnects of advanced CMOS technology nodes.

cond-mat.mtrl-sci↗

arXiv2021

Fabry-Pérot interferometry with gate-tunable 3D topological insulator nanowires

Three-dimensional topological insulator (3D TI) nanowires display various interesting magnetotransport properties that can be attributed to their spin-momentum-locked surface states such as quasiballistic transport and Aharonov-Bohm oscillations. Here, we focus on the transport properties of a 3D TI nanowire with a gated section that forms an electronic Fabry-Pérot (FP) interferometer that can be tuned to act as a surface-state filter or energy barrier. By tuning the carrier density and length of the gated section of the wire, the interference pattern can be controlled and the nanowire can become fully transparent for certain topological surface-state input modes while completely filtering out others. We also consider the interplay of FP interference with an external magnetic field, with which Klein tunneling can be induced, and transverse asymmetry of the gated section, e.g., due to a top-gated structure, which displays an interesting analogy with Rashba nanowires. Due to its rich conductance phenomenology, we propose a 3D TI nanowire with gated section as an ideal setup for a detailed transport-based characterization of 3D TI nanowire surface states near the Dirac point, which could be useful towards realizing 3D TI nanowire-based topological superconductivity and Majorana bound states.

cond-mat.mes-hall↗

arXiv2021

Magnetotransport signatures of three-dimensional topological insulator nanostructures

We study the magnetotransport properties of patterned 3D topological insulator nanostructures with several leads, such as kinks or Y-junctions, near the Dirac point with analytical as well as numerical techniques. The interplay of the nanostructure geometry, the external magnetic field and the spin-momentum locking of the topological surface states lead to a richer magnetoconductance phenomenology as compared to straight nanowires. Similar to straight wires, a quantized conductance with perfect transmission across the nanostructure can be realized across a kink when the input and output channels are pierced by a half-integer magnetic flux quantum. Unlike for straight wires, there is an additional requirement depending on the orientation of the external magnetic field. A right-angle kink shows a unique $π$-periodic magnetoconductance signature as a function of the in-plane angle of the magnetic field. For a Y-junction, the transmission can be perfectly steered to either of the two possible output legs by a proper alignment of the external magnetic field. These magnetotransport signatures offer new ways to explore topological surface states and could be relevant for quantum transport experiments on nanostructures which can be realized with existing fabrication methods.

cond-mat.mes-hall↗

arXiv2020

Temperature-Dependent Resistivity of Alternative Metal Thin Films

The temperature coefficients of the resistivity (TCR) of Cu, Ru, Co, Ir, and W thin films have been investigated as a function of film thickness below 10 nm. Ru, Co, and Ir show bulk-like TCR values that are rather independent of the thickness whereas the TCR of Cu increases strongly with decreasing thickness. Thin W films show negative TCR values, which can be linked to high disorder. The results are qualitatively consistent with a temperature-dependent semiclassical thin film resistivity model that takes into account phonon, surface, and grain boundary scattering.

cond-mat.mtrl-sci↗

arXiv2019

Theoretical study of scattering in graphene ribbons in the presence of structural and atomistic edge roughness

We investigate the diffusive electron-transport properties of charge-doped graphene ribbons and nanoribbons with imperfect edges. We consider different regimes of edge scattering, ranging from wide graphene ribbons with (partially) diffusive edge scattering to ribbons with large width variations and nanoribbons with atomistic edge roughness. For the latter, we introduce an approach based on pseudopotentials, allowing for an atomistic treatment of the band structure and the scattering potential, on the self-consistent solution of the Boltzmann transport equation within the relaxation-time approximation and taking into account the edge-roughness properties and statistics. The resulting resistivity depends strongly on the ribbon orientation, with zigzag (armchair) ribbons showing the smallest (largest) resistivity and intermediate ribbon orientations exhibiting intermediate resistivity values. The results also show clear resistivity peaks, corresponding to peaks in the density of states due to the confinement-induced subband quantization, except for armchair-edge ribbons that show a very strong width dependence because of their claromatic behavior. Furthermore, we identify a strong interplay between the relative position of the two valleys of graphene along the transport direction, the correlation profile of the atomistic edge roughness, and the chiral valley modes, leading to a peculiar strongly suppressed resistivity regime, most pronounced for the zigzag orientation.

cond-mat.mes-hall↗

arXiv2019

Disorder-driven exceptional lines and Fermi ribbons in tilted nodal-line semimetals

We consider the impact of disorder on the spectrum of three-dimensional nodal-line semimetals. We show that the combination of disorder and a tilted spectrum naturally leads to a non-Hermitian self-energy contribution that can split a nodal line into a pair of exceptional lines. These exceptional lines form the boundary of an open and orientable bulk Fermi ribbon in reciprocal space on which the energy gap vanishes. We find that the orientation and shape of such a disorder-induced bulk Fermi ribbon is controlled by the tilt direction and the disorder properties, which can also be exploited to realize a twisted bulk Fermi ribbon with nontrivial winding number. Our results put forward a paradigm for the exploration of non-Hermitian topological phases of matter.

cond-mat.mes-hall↗

arXiv2018

Resistivity scaling model for metals with conduction band anisotropy

It is generally understood that the resistivity of metal thin films scales with film thickness mainly due to grain boundary and boundary surface scattering. Recently, several experiments and ab initio simulations have demonstrated the impact of crystal orientation on resistivity scaling. The crystal orientation cannot be captured by the commonly used resistivity scaling models and a qualitative understanding of its impact is currently lacking. In this work, we derive a resistivity scaling model that captures grain boundary and boundary surface scattering as well as the anisotropy of the band structure. The model is applied to Cu and Ru thin films, whose conduction bands are (quasi-)isotropic and anisotropic respectively. After calibrating the anisotropy with ab initio simulations, the resistivity scaling models are compared to experimental resistivity data and a renormalization of the fitted grain boundary reflection coefficient can be identified for textured Ru.

cond-mat.mes-hall↗

arXiv2018

Finite Size Effects in Highly Scaled Ruthenium Interconnects

Ru has been considered a candidate to replace Cu-based interconnects in VLSI circuits. Here, a methodology is proposed to predict the resistivity of (Ru) interconnects. First, the dependence of the Ru thin film resistivity on the film thickness is modeled by the semiclassical Mayadas-Shatzkes (MS) approach. The fitting parameters thus obtained are then used as input in a modified MS model for nanowires to calculate wire resistivities. Predicted experimental resistivities agreed within about 10%. The results further indicate that grain boundary scattering was the dominant scattering mechanism in scaled Ru interconnects.

cond-mat.mtrl-sci↗