arXiv subjects

Sunil A. Bhave

Publications and source records attributed to Sunil A. Bhave.

At least 37 records · Page 2Linked to original sources

arXiv2022

Self-Aligned Single-Electrode Actuation of Tangential and Wineglass Modes using PMN-PT

Considering evolution of rotation sensing and timing applications realized in Micro-electro-mechanical systems (MEMS), flexural mode resonant shapes are outperformed by bulk acoustic wave (BAW) counterparts by achieving higher frequencies with both electrostatic and piezoelectric transduction. Within the 1-30 MHz range, which hosts BAW gyroscopes and timing references, piezoelectric and electrostatic MEMS have similar transduction efficiency. Although, when designed intelligently, electrostatic transduction allows self-alignment between electrodes and the resonator for various BAW modes, misalignment is inevitable regarding piezoelectric transduction of BAW modes that require electrode patterning. In this paper transverse piezoelectric actuation of [011] oriented single crystal lead magnesium niobate-lead titanate (PMN-PT) thin film disks is shown to excite the tangential mode and family of elliptical compound resonant modes, utilizing a self-aligned and unpatterned electrode that spans the entire disk surface. The resonant mode coupling is achieved employing a unique property of [011] PMN-PT, where the in-plane piezoelectric coefficients have opposite sign. Fabricating 1-port disk transducers, RF reflection measurements are performed that demonstrate the compound mode family shapes in 1-30 MHz range. Independent verification of mode transduction is achieved using in-plane displacement measurements with Polytec's Laser Doppler Vibrometer (LDV). While tangential mode achieves 40$^o$/sec dithering rate at 335 kHz resonant frequency, the n=2 wine-glass mode achieves 11.46 nm tip displacement at 8.42 MHz resonant frequency on a radius of 60 $μ$m disk resonator in air. A single electrode resonator that can excite both tangential and wine-glass modes with such metrics lays the foundation for a BAW MEMS gyroscope with a built-in primary calibration stage.

physics.app-ph↗

arXiv2022

Optically induced static magnetic field in ensemble of nitrogen-vacancy centers in diamond

Generation of local magnetic field at the nanoscale is desired for many applications such as spin-qubit-based quantum memories. However, this is a challenge due to the slow decay of static magnetic fields. Here, we demonstrate photonic spin density (PSD) induced effective static magnetic field for an ensemble of nitrogen-vacancy (NV) centers in bulk diamond. This locally induced magnetic field is a result of coherent interaction between the optical excitation and the NV centers. We demonstrate an optically induced spin rotation on the Bloch sphere exceeding 10 degrees which has potential applications in all optical coherent control of spin qubits.

quant-ph↗

arXiv2022

Nuclear spin polarization and control in a van der Waals material

Van der Waals layered materials are a focus of materials research as they support strong quantum effects and can easily form heterostructures. Electron spins in van der Waals materials played crucial roles in many recent breakthroughs, including topological insulators, two-dimensional (2D) magnets, and spin liquids. However, nuclear spins in van der Waals materials remain an unexplored quantum resource. Here we report the first demonstration of optical polarization and coherent control of nuclear spins in a van der Waals material at room temperature. We use negatively-charged boron vacancy ($V_B^-$) spin defects in hexagonal boron nitride to polarize nearby nitrogen nuclear spins. Remarkably, we observe the Rabi frequency of nuclear spins at the excited-state level anti-crossing of $V_B^-$ defects to be 350 times larger than that of an isolated nucleus, and demonstrate fast coherent control of nuclear spins. We also detect strong electron-mediated nuclear-nuclear spin coupling that is 5 orders of magnitude larger than the direct nuclear spin dipolar coupling, enabling multi-qubit operations. Nitrogen nuclear spins in a triangle lattice will be suitable for large-scale quantum simulation. Our work opens a new frontier with nuclear spins in van der Waals materials for quantum information science and technology.

quant-ph↗

arXiv2022

Snowmass 2021 White Paper: The Windchime Project

The absence of clear signals from particle dark matter in direct detection experiments motivates new approaches in disparate regions of viable parameter space. In this Snowmass white paper, we outline the Windchime project, a program to build a large array of quantum-enhanced mechanical sensors. The ultimate aim is to build a detector capable of searching for Planck mass-scale dark matter purely through its gravitational coupling to ordinary matter. In the shorter term, we aim to search for a number of other physics targets, especially some ultralight dark matter candidates. Here, we discuss the basic design, open R&D challenges and opportunities, current experimental efforts, and both short- and long-term physics targets of the Windchime project.

hep-ex↗

arXiv2021

Ultralow-noise frequency-agile photonic integrated lasers

Low-noise lasers are of central importance in a wide variety of applications, including high spectral-efficiency coherent communication protocols, distributed fibre sensing, and long distance coherent LiDAR. In addition to low phase noise, frequency agility, that is, the ability to achieve high-bandwidth actuation of the laser frequency, is imperative for triangular chirping in frequency-modulated continuous-wave (FMCW) based ranging or any optical phase locking as routinely used in metrology. While integrated silicon-based lasers have experienced major advances and are now employed on a commercial scale in data centers, integrated lasers with sub-100 Hz-level intrinsic linewidth are based on optical feedback from photonic circuits that lack frequency agility. Here, we demonstrate a wafer-scale-manufacturing-compatible hybrid photonic integrated laser that exhibits ultralow intrinsic linewidth of 25 Hz while offering unsurpassed megahertz actuation bandwidth, with a tuning range larger than 1 GHz. Our approach uses ultralow-loss (1 dB/m) Si$_3$N$_4$ photonic microresonators, combined with aluminium nitride (AlN) or lead zirconium titanate (PZT) microelectromechanical systems (MEMS) based stress-optic actuation. Electrically driven low-phase noise lasing is attained by self-injection locking of an Indium Phosphide (InP) laser chip and only limited by fundamental thermo-refractive noise. By utilizing difference drive and apodization of the photonic chip, a flat actuation response up to 10 MHz is achieved. We leverage this capability to demonstrate a compact coherent LiDAR engine that can generate up to 800 kHz FMCW triangular optical chirp signals, requiring neither any active linearization nor predistortion compensation, and perform a 10 m optical ranging experiment, with a resolution of 12.5 cm.

physics.optics↗

arXiv2021

High-contrast plasmonic-enhanced shallow spin defects in hexagonal boron nitride for quantum sensing

The recently discovered spin defects in hexagonal boron nitride (hBN), a layered van der Waals material, have great potential in quantum sensing. However, the photoluminescence and the contrast of the optically detected magnetic resonance (ODMR) of hBN spin defects are relatively low so far, which limits their sensitivity. Here we report a record-high ODMR contrast of 46$\%$ at room temperature, and simultaneous enhancement of the photoluminescence of hBN spin defects by up to 17-fold by the surface plasmon of a gold-film microwave waveguide. Our results are obtained with shallow boron vacancy spin defects in hBN nanosheets created by low-energy He$^+$ ion implantation, and a gold-film microwave waveguide fabricated by photolithography. We also explore the effects of microwave and laser powers on the ODMR, and improve the sensitivity of hBN spin defects for magnetic field detection. Our results support the promising potential of hBN spin defects for nanoscale quantum sensing.

quant-ph↗

arXiv2021

Magnetic-Free Silicon Nitride Integrated Optical Isolator

Integrated photonics has enabled signal synthesis, modulation and conversion using photonic integrated circuits (PIC). Many materials have been developed, among which silicon nitride (Si$_3$N$_4$) has emerged as a leading platform particularly for nonlinear photonics. Low-loss Si$_3$N$_4$ PIC has been widely used for frequency comb generation, narrow-linewidth lasers, microwave photonics, photonic computing networks, and even surface-electrode ion traps. Yet, among all demonstrated functionalities for Si$_3$N$_4$ integrated photonics, optical non-reciprocal devices, such as isolators and circulators, have not been achieved. Conventionally, they are realized based on Faraday effect of magneto-optic materials under external magnetic field. However, it has been challenging to integrate magneto-optic materials that are not CMOS-compatible and that require bulky external magnet. Here, we demonstrate a magnetic-free optical isolator based on aluminum nitride (AlN) piezoelectric modulators monolithically integrated on ultralow-loss Si$_3$N$_4$ PIC. The transmission reciprocity is broken by spatio-temporal modulation of a Si$_3$N$_4$ microring resonator with three AlN bulk acoustic wave resonators that are driven with a rotational phase. This design creates an effective rotating acoustic wave that allows indirect interband transition in only one direction among a pair of strongly coupled optical modes. Maximum of 10 dB isolation is achieved under 100 mW RF power applied to each actuator, with minimum insertion loss of 0.1 dB. The isolation remains constant over nearly 30 dB dynamic range of optical input power, showing excellent optical linearity. Our integrated, linear, magnetic-free, electrically driven optical isolator could become key building blocks for integrated lasers, chip-scale LiDAR engines, as well as optical interfaces for superconducting circuits.

physics.optics↗

arXiv2021

Semi-insulating 4H-SiC lateral bulk acoustic wave resonators

Silicon carbide (SiC) excels in its outstanding mechanical properties, which are widely studied in Microelectromechanical systems (MEMS). Recently, the mechanical tuning of color centers in 4H-SiC has been demonstrated, broadening its application in quantum spintronics. The strain generated in a mechanical resonator can be used to manipulate the quantum state of the color center qubit. This work reports a lateral overtone mechanical resonator fabricated from a semi-insulating (SI) bulk 4H-SiC wafer. An aluminum nitride (AlN) piezoelectric transducer on SiC is used to drive the resonance. The resonator shows a series of modes with quality factors (Q) above 3000. An acoustic reflector positioned at the anchor shows a 22% improvement in the Q at 300 MHz resonance and suppresses the overtone modes away from it. This monolithic SiC resonator allows optical access to the SiC color centers from both sides of the wafer, enabling convenient setup in quantum measurements.

cond-mat.mtrl-sci↗

arXiv2020

Lithium Niobate Optomechanical Disk Resonators

Lithium Niobate (LN or just niobate) thin-film micro-photonic resonators have promising prospects in many applications including high efficiency electro-optic modulators, optomechanics and nonlinear optics. This paper presents free-standing thin-film lithium niobate photonic resonators on a silicon platform using MEMS fabrication technology. We fabricated a 35um radius niobate disk resonator that exhibits high intrinsic optical quality factor (Q) of 484,000. Exploiting the optomechanical interaction from the released free-standing structure and high optical Q, we were able to demonstrate acousto-optic modulation from these devices by exciting a 56MHz radial breathing mechanical mode (mechanical Q of 2700) using a probe.

physics.optics↗

arXiv2020

Octave-Tunable Magnetostatic Wave YIG Resonators on a Chip

We have designed, fabricated, and characterized magnetostatic wave (MSW) resonators on a chip. The resonators are fabricated by patterning single-crystal yttrium iron garnet (YIG) film on a gadolinium gallium garnet (GGG) substrate and excited by loop-inductor transducers. We achieved this technology breakthrough by developing a YIG film etching process and fabricating thick aluminum coplanar waveguide (CPW) inductor loop around each resonator to individually address and excite MSWs. At 4.77 GHz, the 0.68 square mm resonator achieves a quality factor Q > 5000 with a bias field of 987 Oe. We also demonstrate YIG resonator tuning by more than one octave from 3.63 to 7.63 GHz by applying an in-plane external magnetic field. The measured quality factor of the resonator is consistently over 3000 above 4 GHz. The micromachining technology enables the fabrication of multiple single- and two-port YIG resonators on the same chip with all resonators demonstrating octave tunability and high Q .

physics.app-ph↗

arXiv2020

Monolithic piezoelectric control of soliton microcombs

High-speed laser frequency actuation is critical in all applications employing lasers and frequency combs, and is prerequisite for phase locking, frequency stabilization and stability transfer among multiple optical carriers. Soliton microcombs have emerged as chip-scale, broadband and low-power-consumption frequency comb sources.Yet, integrated microcombs relying on thermal heaters for on-chip actuation all exhibit only kilohertz actuation bandwidth. Consequently, high-speed actuation and locking of microcombs have been attained only with off-chip bulk modulators. Here, we present high-speed microcomb actuation using integrated components. By monolithically integrating piezoelectric AlN actuators on ultralow-loss Si3N4 photonic circuits, we demonstrate voltage-controlled soliton tuning, modulation and stabilization. The integrated AlN actuators feature bi-directional tuning with high linearity and low hysteresis, operate with 300 nW power and exhibit flat actuation response up to megahertz frequency, significantly exceeding bulk piezo tuning bandwidth. We use this novel capability to demonstrate a microcomb engine for parallel FMCW LiDAR, via synchronously tuning the laser and microresonator. By applying a triangular sweep at the modulation rate matching the frequency spacing of HBAR modes, we exploit the resonant build-up of bulk acoustic energy to significantly lower the required driving to a CMOS voltage of only 7 Volts. Our approach endows soliton microcombs with integrated, ultralow-power-consumption, and fast actuation, significantly expanding the repertoire of technological applications.

physics.app-ph↗

arXiv2019

SiC Cantilevers For Generating Uniaxial Stress

This paper demonstrates the first beam resonators fabricated from bulk high purity semi-insulating 4H Silicon Carbide wafers (HPSI 4H-SiC). Our innovations include: (1) Multi-level front-side, back-side inductively coupled plasma-deep reactive ion etching (ICP-DRIE) technology to fabricate thin, low-mass, bending-mode resonators framed by the SiC substrate (2) Laser Doppler Vibrometer (LDV) measurements of mechanical quality factors (Q) > 10,000 with frequencies ranging from 300 kHz to 8MHz and (3) Calculated uniaxial in-plane surface stress 20 MPa at top surface of resonator base when operating at resonance in vacuum.

cond-mat.mes-hall↗

arXiv2019

Observation of stimulated Brillouin scattering in silicon nitride integrated waveguides

Silicon nitride (Si3N4) has emerged as a promising material for integrated nonlinear photonics and has been used for broadband soliton microcombs and low-pulse-energy supercontinuum generation. Therefore understanding all nonlinear optical properties of Si3N4 is important. So far, only stimulated Brillouin scattering (SBS) has not been reported. Here we observe, for the first time, backward SBS in fully cladded Si3N4 waveguides. The Brillouin gain spectrum exhibits an unusual multi-peak structure resulting from hybridization with with high-overtone bulk acoustic resonances (HBARs) of the silica cladding. The reported intrinsic Si3N4 Brillouin gain at 25 GHz is estimated as 7x10^-13 m/W. Moreover, the magnitude of the Si3N4 photoelastic constant is estimated as |p12| = 0.047 +/- 0.004. Since SBS imposes an optical power limitation for waveguides, our results explain the capability of Si3N4 to handle high optical power, central for integrated nonlinear photonics.

physics.optics↗

arXiv2019

Hybrid Integrated Photonics Using Bulk Acoustic Resonators

Microwave frequency acousto-optic modulation is realized by exciting high overtone bulk acoustic wave resonances (HBAR resonances) in the photonic stack. These confined mechanical stress waves transmit exhibit vertically transmitting, high quality factor (Q) acoustic Fabry Perot resonances that extend into the Gigahertz domain, and offer stress-optical interaction with the optical modes of the microresonator. Although HBAR are ubiquitously used in modern communication, and often exploited in superconducting circuits, this is the first time they have been incorporated on a photonic circuit based chip. The electro-acousto-optical interaction observed within the optical modes exhibits high actuation linearity, low actuation power and negligible crosstalk. Using the electro-acousto-optic interaction, fast optical resonance tuning is achieved with sub-nanosecond transduction time. By removing the silicon backreflection, broadband acoustic modulation at 4.1 and 8.7 GHz is realized with a 3 dB bandwidth of 250 MHz each. The novel hybrid HBAR nanophotonic platform demonstrated here, allowing on chip integration of micron-scale acoustic and photonic resonators, can find immediate applications in tunable microwave photonics, high bandwidth soliton microcomb stabilization, compact opto-electronic oscillators, and in microwave to optical conversion schemes. Moreover the hybrid platform allows implementation of momentum biasing, which allows realization of on chip non-reciprocal devices such as isolators or circulators and topological photonic bandstructures.

physics.app-ph↗

arXiv2019

Engineering electron-phonon coupling of quantum defects to a semi-confocal acoustic resonator

Diamond-based microelectromechanical systems (MEMS) enable direct coupling between the quantum states of nitrogen-vacancy (NV) centers and the phonon modes of a mechanical resonator. One example, diamond high-overtone bulk acoustic resonators (HBARs), feature an integrated piezoelectric transducer and support high-quality factor resonance modes into the GHz frequency range. The acoustic modes allow mechanical manipulation of deeply embedded NV centers with long spin and orbital coherence times. Unfortunately, the spin-phonon coupling rate is limited by the large resonator size, $>100~μ$m, and thus strongly-coupled NV electron-phonon interactions remain out of reach in current diamond BAR devices. Here, we report the design and fabrication of a semi-confocal HBAR (SCHBAR) device on diamond (silicon carbide) with $f\cdot Q>10^{12}$($>10^{13}$). The semi-confocal geometry confines the phonon mode laterally below 10~$μ$m. This drastic reduction in modal volume enhances defect center electron-phonon coupling. For the native NV centers inside the diamond device, we demonstrate mechanically driven spin transitions and show a high strain-driving efficiency with a Rabi frequency of $(2π)2.19(14)$~MHz/V$_{p}$, which is comparable to a typical microwave antenna at the same microwave power.

cond-mat.mes-hall↗

arXiv2019

Modeling the colors of phase noise in optomechanical oscillators

Optomechanical oscillators (OMOs) combine the co-existing high quality factor mechanical and optical resonances in an integrated device to realize low phase noise RF oscillations. While several attempts have been demonstrated towards modeling the phase noise in such oscillators, the close-to-carrier phase noise models in literature do not account for $1/f^3$ (pink noise) and higher order slopes in the phase noise spectra. Here we present a phase noise model, corroborated with experimental characterization of phase noise of two monolithic integrated silicon OMOs, accounting for contributions to the phase noise due to thermomechanical, and adsorption-desorption (AD) noise. The model shows good agreement with experimental data and provides further insights into the mechanisms underlying the noise processes contributing to different slopes in the phase noise spectra in OMOs.

physics.optics↗

arXiv2019

PORT: A piezoelectric optical resonance tuner

This abstract presents an aluminum nitride (AlN) piezoelectric actuator for tuning optical resonance modes of silicon nitride photonic resonators. The AlN actuator is fabricated on top of a thick silicon dioxide cladding that encapsulates the nitride resonator and waveguide. The PORT is defined by undercutting the cladding layer with a lateral silicon etch. It tunes the optical wavelength by 20pm on applying 60 V to the top electrode with a 0.5nA current draw. The thick oxide cladding preserves the resonator's loaded quality factor Q optical of 64,000 across the entire tuning range. The first bending mode is at 1.1MHz enabling a tuning speed of <1 μs.

physics.app-ph↗

arXiv2018

Modular Compact Modeling of Magnetic Tunnel Junction Devices

This paper describes a robust, modular, and physics- based circuit framework to model conventional and emerging Magnetic Tunnel Junction (MTJ) devices. Magnetization dynamics are described by the stochastic Landau-Lifshitz-Gilbert (sLLG) equation whose results are rigorously benchmarked with a Fokker-Planck Equation (FPE) description of magnet dynamics. We then show how sLLG is coupled to transport equations of MTJ-based devices in a unified circuit platform. Step by step, we illustrate how the physics-based MTJ model can be extended to include different spintronics phenomena, including spin-transfer-torque (STT), voltage-control of magnetic anisotropy (VCMA) and spin-orbit torque (SOT) phenomena by experimentally benchmarked examples. To demonstrate how our approach can be used in the exploration of novel MTJ-based devices, we also present a recently proposed MEMS resonator- driven spin-torque nano oscillator (STNO) that can reduce the phase noise of STNOs. We briefly elaborate on the use of our framework beyond conventional devices.

cond-mat.mes-hall↗