arXiv subjects

Chandra Sekhar Tiwary

Publications and source records attributed to Chandra Sekhar Tiwary.

At least 19 recordsLinked to original sources

arXiv2026

In-Situ TEM Observation of Solid-State Phase Evolution in High-Entropy Alloy Nanoparticles

The emergence of new materials has gone beyond conventional design principles. Among them are high entropy alloys (HEAs), in which multiple metallic elements coexist within a single unit cell. In this case, each atomic position in a solid material has a different chemical environment, leading to configurational entropy as high as that in the fully random or melted state, which has been frozen to a solid solution. However, the behaviour of such alloy systems at pre-melting temperatures is largely unknown, where atoms gain sufficient mobility and time to rearrange, leading to an enthalpic rather than an entropic interplay. This study demonstrated the phase transformation of HEA nanoclusters (CoCrFeMnNi) under high-resolution transmission electron microscopy (HRTEM) at different temperatures, including room temperature (RT), 550 °C, and 850 °C. The clustered nanoparticles coarsen into larger clusters, accompanied by compositional heterogeneity due to surface and lattice diffusion. This experimental finding of atomic mobility was further corroborated using molecular dynamics, which provides a detailed mechanistic description.

cond-mat.mtrl-sci↗

arXiv2026

Ion-Engineered Insulator-to-Semiconductor Transition in Natural 2D Biotite

Naturally occurring layered silicates offer an abundant yet unexplored class of 2D materials, but their insulating nature limits their functional utility. Here, we demonstrate a chemical strategy that transforms liquid-phase-exfoliated biotite nanosheets into a tunable 2D semiconductor through controlled NaOH treatment. The resulting insulator-to-semiconductor transition originates from Na incorporation, defect generation, and local structural reconstruction while largely preserving the layered framework. Structural and chemical analyses reveal lattice distortion, interlayer reorganization, hydroxylation, and partial Na+-K+ exchange, establishing the origin of the electronic restructuring. This transformation broadens the optical response, shifting the approximately 221 nm absorption toward approximately 280 and 975 nm, reducing the optical bandgap from approximately 5.2 to 3.2-3.5 eV, and introducing low-energy transitions at approximately 1.12-1.17 eV. Electrical measurements reveal nonlinear transport with currents reaching close to 10 microA, demonstrating activated carrier conduction. Ultrafast transient absorption reveals pronounced excited-state absorption, with carrier cooling (0.16-0.38 ps) followed by fast (35-60 ps) and long-lived (336-491 ps) relaxation associated with trap-mediated recombination. Fluence-dependent dynamics reveal a hot-phonon bottleneck at elevated carrier densities. Together with density functional theory calculations, these results establish chemical defect and ion engineering as a powerful route for converting naturally abundant layered minerals into electronically tunable 2D materials for emerging optoelectronic and ultrafast photonic technologies.

cond-mat.mtrl-sci↗

arXiv2026

Structure-Property Correlation of Cr/Cu-MnFeCoNi High-Entropy Alloys for Alkaline Water Electrolysis

High-entropy alloys (HEAs), with their unique compositional-complexity and tunable surface chemistry, have emerged as promising electrocatalysts for energy conversion. The catalytic activity of HEA often arises from the interplay between the intrinsic activity of the individual elements and the synergistic effects generated at the interfaces. Even a single-element substitution in a multicomponent HEA can substantially alter the surface-chemistry and electrochemical kinetics of the active surface. Here we investigated the structure-property relationship of CrMnFeCoNi (HEA-Cr) and MnFeCoNiCu (HEA-Cu) HEAs by comparing the alkaline hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) activity. Under the same experimental condition, HEA-Cu outperforms HEA-Cr towards both HER and OER. Substituting Cr with Cu significantly enhances the bifunctional activity, where HEA-Cu achieved a lower overpotential (538 mV) and Tafel slope (165 mVdec-1) when compared with HEA-Cr. Computational analysis corroborates these findings, showing that Cu substitution modulates the electronic-structure to provide favorable binding energies for reaction intermediates (H*, O*, OH*, and OOH*). Interestingly, unlike HER, recovered HEA-Cu after OER showed migration of Cu forming a Cu-rich outer layer shell with a multimetallic core. These findings demonstrate the potential of single-element substitution in HEAs as a strategy for designing high-performance, cost-effective catalysts for efficient water electrolysis.

cond-mat.mtrl-sci↗

arXiv2026

High-Entropy Nitride Photocatalysts for Visible-Light Antibiotic Degradation: Structural Stability, In Situ Interfacial Visualization, and Molecular-Level Mechanistic Insights

High-entropy nitrides (HENs) have emerged as a promising class of advanced materials with tunable electronic structures, high stability, and abundant active sites. The incorporation of nitrogen enhances visible-light absorption, promotes efficient charge separation, and improves structural robustness, making these materials highly suitable for photocatalytic applications. In this study, (MnFeCoNiCu)N-based HEN nanoparticles (NPs) were synthesized as visible-light-assisted photocatalysts for the degradation of antibiotics, including sulfamethoxazole (SME) and tetracycline (TCL). The catalyst exhibited excellent performance, achieving 96% degradation of SME and 94% removal of TCL within 2 h of visible-light irradiation. The photocatalytic activity was systematically evaluated under varying operational parameters, including solution pH, catalyst dosage, pollutant concentration, and the presence of coexisting ions. Notably, the catalyst maintained high efficiency in real water matrices, demonstrating its practical applicability. The entropy-stabilized nitride framework exhibited negligible metal leaching, excellent thermal and structural stability as confirmed by temperature-dependent synchrotron angle-dispersive X-ray diffraction, and stable performance over multiple reuse cycles. Furthermore, in situ liquid-cell transmission electron microscopy provided real-time insight into catalyst-pollutant interactions, while complementary molecular simulations revealed the structural stability of the HEN NPs during molecular adsorption and the distinct interaction modes of the two antibiotics. Phytotoxicity tests using Vigna radiata confirmed the effective detoxification of treated solutions. Overall, this work establishes (MnFeCoNiCu)N HENs as efficient and durable visible-light-driven photocatalysts for the removal of antibiotics from complex aqueous environments.

cond-mat.mtrl-sci↗

arXiv2026

Composition-Driven High-Entropy Alloys with Enhanced Magnetocaloric Properties

High entropy alloys (HEAs) are promising magnetocaloric materials with tunable operating temperature conditions using compositional modifications. Here, we combine experiments and first principles based spin modelling to engineer magnetocaloric response in single-phase cubic HEAs consisting of earth-abundant elements such as Fe, Ni, Co, Cr, and Cu. An equiatomic (Fe20Ni20Co20Cr20Cu20) and a Fe and Co rich non equiatomic (Fe34Ni17.7Co24.8Cr15.2Cu8.3) show a continuous ferromagnetic to paramagnetic transition with Curie temperature (TC)=110 K and TC=420 K for non equiatomic. Under the 1.6 Tesla magnetic field, the investigated alloy shows the entropy change =1.24 J per kgK with relative cooling power (RCP) =92 J per kg due to a broader effective cooling span. Density functional theory simulations reveal that reducing Cu enhances the spin-polarized Fe, Co, or Ni, 3d weight near fermi level, consistent with stronger ferromagnetic exchange. Exchange couplings mapped onto a classical Heisenberg model and solved by atomistic Monte Carlo to theoretically predict TC of both the investigated alloys. A controlled theoretical Cu sweep in equimolar further confirms that increasing Cu monotonically dilutes the magnetic sublattice and lowers TC, providing a quantitative design guideline to tune magnetocaloric operating temperatures in transition metal HEAs.

cond-mat.mtrl-sci↗

arXiv2026

Atomically-Thin Tsumoite (BiTe) based All-Photonic-Isolator, Information Converter, and Logic-Gate

Two-dimensional tsumoite (BiTe), a polymorph of Bi2Te3, has emerged as a promising candidate for nonlinear photonic devices owing to its strong spin-orbit coupling, tunable bandgap, and high carrier mobility characteristics. This work presents a thorough examination of the third-order nonlinear optical response of BiTe dispersions using spatial self-phase modulation (SSPM) spectroscopy. The nonlinear refractive index (n2) and third-order nonlinear susceptibility are quantitatively derived from the diffraction ring patterns, demonstrating third-order nonlinear susceptibility values, similar to or surpassing those of advanced 2D materials. The temporal development and distortion of the SSPM rings are examined using the wind-chime model, and thermal factors influencing the SSPM pattern are analyzed. First-principles electronic band structure studies reveal that the elevated nonlinear susceptibility arises from band dispersion. Direct correlation between carrier transport and third-order nonlinear susceptibility is established. Utilizing these qualities, all photonic devices, including a photonic isolator based on a 2D BiTe-2D hBN heterostructure, are depicted to show asymmetric propagation. A photonic information converter and a logic gate are designed using the cross-phase modulation technique. These findings establish 2D BiTe nanostructure as a formidable nonlinear optical platform for advanced photonic signal processing and integrated photonic applications.

physics.optics↗

arXiv2026

Transforming Discarded Thermoelectrics into High-Performance HER Catalysts

With the increase in the complexity of the materials used in various sophisticated electronic devices, recycling of E-waste is becoming challenging. In the present study, we have converted thermoelectric (TE) waste into functional HER electrocatalyst by considering circular-economy and low-carbon approach. The as received TE waste was processed through ball milling (TE waste-BM) and melting casting (TE waste-M) routes. Morphological and structural evaluations revealed that the formation of BiSbTe3/ZnTe heterostructure in TE-waste-M promote HE efficiency when compared to the presence of Bi2Te3/BiSbTe3 heterostructure (TE-waste-BM). TE waste-M exhibited lower overpotential (641 mV at 10 mA/sq.cm), smaller Tafel slope (233 mV/dec) and stable operation for 5.5 h with negligible current decay than that of TE waste-BM, attributed to the accelerated charge transfer, fast water dissociation steps and rapid hydrogen adsorption in TE waste-M, originated from the presence of BiSbTe3/ZnTe heterostructure, defect enriched interfaces. Density functional theory calculations supported the experimental findings, revealing that heterostructures strengthens the bonding states near the Fermi level, thereby enhancing the HER activity of BiSbTe3/ZnTe heterostructure. This work simultaneously integrates waste management with green hydrogen production by offering an economically viable, scalable and low-carbon approach for HER catalysts.

cond-mat.mtrl-sci↗

arXiv2026

Plasmonic Mediated Atomically Engineered 2D Aluminium Quasicrystals for Dopamine Biosensing

Dopamine levels are linked to neurological illnesses like Parkinson's and Alzheimer's. Thus, reliable and sensitive detection of dopamine is crucial for early diagnosis and surveillance of neurodegenerative diseases. Non-noble-metal-based nanomaterials are ideal for light-mediated sensing of organic molecules. Among these, 2D quasicrystal structures consisting of five elements, namely Al70Co10Fe5Ni10Cu5, provide active sites due to their high surface-to-volume ratio, making them excellent for organic chemical sensing. Here, we propose a simple, label-free, spatial self-phase-modulation (SSPM)-based sensing method in liquid form. SSPM-based time evolution of the diffraction pattern for varied mixing levels of a 1100 ppb dopamine solution shows a shift in the active 2D Al QC solution. The 1100 ppb solution shows a distinct value, indicating a change in the nonlinear refractive index. Time-evolution analysis is used to calculate sensitivities to changes in the nonlinear refractive index and time constant. The SPR-activated 2D Al QC nanostructure is used to demonstrate dopamine sensing and to perform qualitative and quantitative evaluations. The SSPM-based sensing has been further compared with other optical-based sensing methods such as Raman spectroscopy, UV-Vis spectroscopy, and FTIR spectroscopy. The experimental observations are also explained using DFT-based simulations. The current SSPM method can be used for rapid, large-scale medical diagnostics.

cond-mat.mtrl-sci↗

arXiv2026

Three-Photon Saturable Absorption in Atomically Thin Phlogopite

Two-dimensional (2D) materials, due to their remarkable physical and chemical properties, hold significant potential for future optical and electrical applications. In this study, the synthesis of 2D phlogopite (magnesium-rich mica) via liquid-phase exfoliation (LPE) is reported using an efficient and scalable procedure. XRD structural analysis revealed a preferential orientation along the (033) plane, whereas AFM and SEM demonstrated a nanoscale thickness and homogeneous morphology. Optical characterisation by UV-Vis and Raman spectroscopy shows tuneable band gaps up to 4.52 eV for the exfoliated 2D phlogopite and distinct vibrational modes indicative of structural evolution. At intense laser conditions, three-photon saturable absorption (3PSA) behaviour was evidenced by light-modulated electrical property studies, which emphasise the potential for optical limiting, switching, and mode-locking applications. The present investigation indicates 2D phlogopite as a versatile material for next-generation optoelectronic devices of high-intensity light modulation.

physics.optics↗

arXiv2026

Multiscale Mechanical Response of 3D-Printed Diamondiynes: From Movable Interlocked Lattices to Architected Metamaterials

Diamondynes are a recently synthesized three-dimensional carbon allotrope, with interlocked and movable sublattices that introduce deformation modes not present in standard architected materials. Here, we report the first multiscale mechanical assessment of Diamondiyne-derived architectures by combining quasi-static compression of 3D-printed specimens with reactive molecular dynamics simulations of the corresponding atomic-scale models. We generate four geometries (3F, 2F-SY, 4F, and 2F-USY). All structures resulted in lower density in the range of 0.20-0.38 g.cm^-3. Experiments indicate that the symmetric two-sublattice structure (2F-SY) delivers the best performance, reaching a specific yield strength of 5.91 MPa.g^-1cm^-3 and a specific energy absorption of 279 J.g^-1, whereas 2F-USY architecture yielded the lowest values, with 0.77 MPa.g^-1.cm^-3 and 16 J.g^-1. The 4F geometry provided a specific energy absorption of 254 J.g^-1. The structures deformed through geometric collapse and strut buckling, which was due to diagonal shear in 2F-USY and progressive compaction in 2F-SY and 3F. Molecular dynamics simulations also confirmed these experimental trends and revealed strong directional anisotropy due to the arrangement of interlocked sublattices, with a stiffness of 24.1 GPa along the z-direction in the case of 4F architecture. Overall, Diamondiyne-derived architectures display geometry-dominated mechanical behavior and serve as a promising platform for lightweight, energy-absorbing metamaterials.

physics.app-ph↗

arXiv2025

Nanoscale mechanics and ultralow Friction of natural 2D silicates: Biotite and Rhodonite

Two-dimensional (2D) silicates have emerged as a promising class of ultrathin materials, expanding the landscape of 2D systems beyond conventional van der Waals crystals. Their unique crystal chemistries and structural anisotropies make them attractive for applications ranging from sensors and flexoelectric devices to drug delivery and catalysis. To unlock their full potential, it is critical to understand their thickness-dependent mechanical properties within the family of 2D silicates. In this study, we investigate the nanomechanical and frictional behaviors of two structurally distinct natural silicates: layered Biotite and chain-structured Rhodonite. Using atomic force microscopy (AFM), we found that Rhodonite exhibits nearly ten times higher adhesion force and modulus response compared to Biotite. Despite this, Biotite demonstrates superior frictional performance, with ultrathin (5 nm) flakes showing a remarkably low coefficient of friction ($\sim 0.6 \times 10^{-3}$) versus Rhodonite ($\sim 3.6 \times 10^{-3}$). To further elucidate interlayer adhesion, density functional theory (DFT) calculations with Hubbard correction were employed. These findings offer valuable insights into the design and selection of 2D silicates for advanced mechanical and tribological applications.

cond-mat.mtrl-sci↗

arXiv2025

Visible-Light Photocatalytic Degradation of Cresols using Sustainable 3D-Printed Bi4O5I2-Hematite Scaffold

In photocatalysis, the reusability limit of catalysts can contribute to secondary pollution, posing ecological risks. Addressing this, the present study explores the integration of additive manufacturing with photocatalysis by decorating Bi$_4$O$_5$I$_2$ onto a 3D-printed hematite scaffold (Bi$_4$O$_5$I$_2$@3DH) for the degradation of cresols. The 3D-printed hematite grid, fabricated via direct ink writing, exhibited excellent rheological behavior ($τγ= 24$ Pa), allowing precise shape retention. The sintered Bi$_4$O$_5$I$_2$ was subsequently immobilized via a facile dip-coating method. Under optimized conditions, the composite achieved 99.78\% degradation of 20 mg/L p-cresol within 240 min of irradiation. Notably, hematite served as a porous substrate and contributed to photocatalytic activity. Density functional theory simulations with Hubbard correction (DFT+U) indicated an interfacial charge transfer of approximately -0.9 electrons from hematite to Bi$_4$O$_5$I$_2$, confirming a S-scheme heterojunction between hematite and Bi$_4$O$_5$I$_2$ semiconductors, validating experimental observations. The composite demonstrated strong performance across varied water matrices and in the presence of other cresol isomers. It also retained 84.28\% degradation efficiency after 10 cycles, with negligible catalyst leaching. Furthermore, in vitro and in silico ecotoxicity analyses revealed reduced toxicity of the degradation products. The current work presents a novel and scalable strategy, advancing the use of earth-abundant hematite minerals in sustainable environmental remediation.

physics.chem-ph↗

arXiv2025

Defect Engineered Layer Dependent Nonlinear Optical Response in Two Dimensional Muscovite for Efficient Optical Limiting

Light-matter interactions in two-dimensional (2D) materials have gained significant interest due to their distinctive optical and electronic properties. Recently, silicates have emerged as a promising new class of 2D materials, but their nonlinear optical properties remain largely unexplored. In this study, we demonstrate layer-dependent nonlinear absorption and optical limiting capabilities of 2D muscovite using femtosecond laser excitation at 450 nm. The two-photon absorption (TPA) coefficient is highly sensitive to both the number of layers and excitation intensity, increasing markedly from (3.91+/-0.06)x10^3 cm GW^-1 in multilayer structures to (6.94+/-0.17)x10^5 cm GW^-1 in the monolayer limit at a peak intensity of 68 GW cm^-2, highlighting a strong layer-dependent enhancement in nonlinear absorption. Additionally, monolayer muscovite exhibits an optical limiting threshold of 1.46 mJ cm^-2, outperforming graphene and other 2D dichalcogenides. This enhanced TPA arises from quantum confinement and intrinsic lattice defects that facilitate nonlinear optical transitions. Density functional theory reveals that liquid-phase exfoliation disrupts potassium interlayers and induces oxygen vacancies, generating mid-gap electronic states that significantly enhance TPA. These insights open new avenues for designing low-fluence, high-efficiency optical limiters using 2D silicates.

physics.optics↗

arXiv2025

Controlled Growth of Bronze Telluride for Scalable Thermoelectric Energy Harvesting

With the growing demand for sustainable and decentralized energy solutions, thermoelectric energy harvesting has emerged as a promising technology for directly converting waste heat into electricity through solid state, environmentally friendly means. Among copper chalcogenides, Cu2Te is a notable p-type material due to its degenerate semiconducting nature and low thermal conductivity. In this study, we present a sustainable synthesis strategy for Sn-doped Cu2Te referred to as bronze telluride (BT) via a chemical vapor deposition (CVD) assisted tellurization process using pre-alloyed Cu Sn (bronze) powder. The resulting BT exhibited an enhanced thermoelectric figure of merit (ZT) of 1 at 500 K. To assess practical applicability, BT was integrated with n type galena (PbS) in a cascaded p n thermoelectric module, which generated 2.8 mV across a temperature gradient of 35 K, demonstrating its potential for medium- to high-temperature waste heat recovery. Furthermore, thermodynamic calculations and density functional theory (DFT) simulations provided insights into the formation mechanism of Cu2Te and the thermoelectric behaviour of BT. This work introduces an efficient, scalable, and environmentally responsible pathway for developing copper-based thermoelectric materials using industrially relevant precursors.

cond-mat.mtrl-sci↗

arXiv2025

All Photonic Isolator using Atomically Thin (2D) Bismuth Telluride (Bi2Te3)

This study demonstrates that two-dimensional (2D) Bi2Te3 exhibits strong light-matter interaction, enabling a broadband Kerr nonlinear optical response. This characteristic is advantageous for nonreciprocal light propagation in passive photonic isolators. Using Spatial Self-Phase Modulation (SSPM) spectroscopy, self-induced diffraction patterns in the far field were observed at excitation wavelengths of 650 nm, 532 nm, and 405 nm to calculate the nonlinear refractive index (n2) and the third-order nonlinear optical susceptibility (chi^(3)) of the synthesized 2D Bi2Te3. The results show that 2D Bi2Te3 possesses a significantly higher nonlinear refractive index than graphene. The laser-induced hole coherence effect is responsible for the large magnitude of the third-order nonlinear susceptibility. Surface engineering techniques were also employed to enhance the response speed of the photonic system. Complementary ab initio simulations were performed to gain further insight into the observed nonlinear behavior. Leveraging the strong Kerr nonlinearity of 2D Bi2Te3, a nonlinear photonic isolator that breaks time-reversal symmetry and enables unidirectional light propagation was demonstrated. This work establishes Bi2Te3 as a novel 2D material for nonlinear photonics, expanding its potential applications in detectors, modulators, and optical switches.

physics.optics↗

arXiv2025

Pyrite Bismuth Telluride Heterojunction for Hybrid Electromagnetic to Thermoelectric Energy Harvesting

The rapid proliferation of wireless networks and connected devices has led to pervasive electromagnetic (EM) energy dissipation into the environment, an underutilized resource for energy harvesting. Here, we demonstrate a pyrite (FeS$_2$)-bismuth telluride (Bi$_2$Te$_3$) heterojunction that enables hybrid electromagnetic-to-thermoelectric energy conversion. Fabricated via a simple cold-press compaction of powders, the heterojunction forms a Schottky interface at FeS$_2$, facilitating efficient RF absorption and localized heating. This heat is harvested by Bi$_2$Te$_3$ through thermoelectric conversion. Under 35~MHz RF irradiation at 1~W input power, the device achieved a local temperature rise of 46~$^\circ$C and a thermal gradient of 5.5~K across the Bi$_2$Te$_3$, resulting in a peak power density of approximately 13~mW/cm$^2$. Molecular dynamics (MD) simulations and density functional theory (DFT) calculations further elucidate the heat transport behavior and interfacial thermoelectric performance. This work introduces a new class of heterostructures for RF-responsive energy harvesting, offering a scalable route toward self-powered IoT and wireless sensing systems.

cond-mat.mtrl-sci↗

arXiv2025

Electronic and Optical Properties of the Recently Synthesized 2D Vivianites (Vivianenes): Insights from First-Principles Calculations

Vivianite (Fe$_3$(PO$_4$)$_2$8H$_2$O) is a naturally occurring layered material with significant environmental and technological relevance. This work presents a comprehensive theoretical investigation of its two-dimensional (2D) counterpart, Vivianene, focusing on its structural, electronic, and optical properties. Using density functional theory (DFT) calculations and ab initio molecular dynamics (AIMD) simulations, we evaluate its thermodynamic stability, band structure, density of states, and optical response. Our results confirm that Vivianene retains the main structural features of bulk Vivianite while exhibiting enhanced thermodynamic stability at room temperature. The electronic structure analysis reveals an indirect bandgap of 3.03 eV for Vivianene, which is slightly lower than the 3.21 eV observed for bulk Vivianite, deviating from the expected quantum confinement trend in 2D materials. The projected density of states (PDOS) analysis indicates that Fe d orbitals predominantly contribute to the valence and conduction bands. Optical calculations demonstrate that Vivianene exhibits a higher optical band gap (3.6 eV) than bulk Vivianite (3.2 eV), with significant absorption in the ultraviolet region. The refractive index and reflectivity analyses suggest that most of the incident light is absorbed rather than reflected, reinforcing its potential for optoelectronic applications. These findings provide valuable insights into the fundamental properties of Vivianene and highlight its potential for advanced applications in sensing, optoelectronics, and energy-related technologies.

cond-mat.mtrl-sci↗

arXiv2025

Localized Radiofrequency Heating for Enhanced Thermoelectric Energy Generation Using Natural Galena Ore

The efficiency of thermoelectric devices can be significantly enhanced by maintaining a stable temperature gradient, which can be achieved through localized heating. Radio waves serve as an ideal heat source for this purpose. In this study, we demonstrate the enhancement of thermoelectric performance in earth-abundant natural ore Galena (PbS) through localized radio frequency (RF) heating. RF heating experiments conducted at frequencies between \SI{35}{MHz} and \SI{45}{MHz} induced substantial localized heating in PbS, generating a temperature gradient of \SI{32}{K}. This resulted in a Seebeck voltage of \SI{-5.8}{mV/K}, approximately 13 times greater than the conventional Seebeck coefficient of PbS (\SI{440}{\micro V/K}). Additionally, a power factor of \SI{151}{mWm^{-1}K^{-2}} and an overall RF to thermoelectric conversion efficiency of 15\% were achieved. Molecular dynamics simulations corroborate the experimental findings, providing insights into the mechanism of thermal transport and RF-induced heating in PbS. These results highlight the potential of localized RF heating as an effective strategy for enhancing thermoelectric performance, with promising implications for ambient thermoelectric energy harvesting applications.

cond-mat.mtrl-sci↗