arXiv subjects

Changqing Feng

Publications and source records attributed to Changqing Feng.

At least 19 recordsLinked to original sources

arXiv2026

A Novel Segment-Based Tracking Algorithm for HLT under High-Occupancy and Complex Conditions

In the High-Level Trigger (HLT) of both electron-positron and hadron collision experiments, the tracking process for large-volume gaseous detectors typically consumes a latency of hundreds of milliseconds. Upgrades of existing experiments and the development of next-generation facilities demand enhanced HLT tracking performance: handling higher detector occupancy and suppressing latency. To address high occupancy conditions, a novel HLT tracking algorithm based on track segments is proposed. This method involves constructing a pattern bank comprising 11 pre-defined patterns, optimizing edge-matrix formation using position, momentum, and timing criteria, and merging stereo superlayer segments to improve track consistency. These measures significantly reduce the number of stored segments and the size of the edge matrix, thereby lowering the complexity of global tracking. Even at 25\% occupancy, the number of elements for global tracking is reduced to approximately 400-500, while the density of the edge matrix remains below 1\%. With the depth-first search within connected components, the simulation results show that the algorithm maintains stable performance with occupancy ranging from 5\% to 25\%, achieving a data compression ratio of approximately 50\% to 70\%. Validation against the STCF offline reconstruction algorithm confirms that the HLT algorithm preserves high signal-hit retention without introducing significant adverse effects on offline tracking efficiency or on the reconstruction. These results demonstrate that the proposed algorithm can retain high-quality signal hits across a broad range of occupancy levels, indicating a strong potential for further development and adaptation to even more challenging, high-luminosity experimental conditions.

physics.ins-det↗

arXiv2025

A Low Background Beta Detection System using a Time Projection Chamber

In this paper, we present a Time Projection Chamber (TPC) system for low-background beta radiation measurements. The system consists of a TPC with two-dimensional-strip readout Micromegas and an anti-coincidence detector with readout pads for cosmic ray veto. The detector system utilize an AGET-based waveform sampling system for data acquisition. The beta detection capability of the system was verified through experimental test using $^{90}$Sr beta source. Additionally, a dedicated simulation program based on Geant4 was developed to model the entire detection process, including responses to both the beta source and background radiation. Simulation results were compared with experimental data for both beta and background samples, showing good agreements. The simulation samples were utilized to optimize and train classification models for beta and background discrimination. By applying the selected model into test data, the system achieved a background rate of 0.49 $\rm cpm/cm^2$ while retaining more than 55% of $^{90}$Sr beta signals within a 7 cm diameter detection region. Further analysis revealed that approximately 70% of the background originates from environmental gamma radiation, while the remaining contribution mainly comes from intrinsic radioactivity of detector materials, particularly the FR-4 based field cage and readout plane. Based on the knowledge gained from the experiments and simulations, an optimization of the TPC system has been proposed, with simulation predicting a potential reduction of the background rate to 0.0012 $\rm cpm/cm^2$.

physics.ins-det↗

arXiv2025

The development of a high granular crystal calorimeter prototype of VLAST

Very Large Area gamma-ray Space Telescope (VLAST) is the next-generation flagship space observatory for high-energy gamma-ray detection proposed by China. The observation energy range covers from MeV to TeV and beyond, with acceptance of 10 m^2sr. The calorimeter serves as a crucial subdetector of VLAST, responsible for high-precision energy measurement and electron/proton discrimination. This discrimination capability is essential for accurately identifying gamma-ray events among the background of charged particles. To accommodate such an extensive energy range, a high dynamic range readout scheme employing dual avalanche photodiodes (APDs) has been developed, achieving a remarkable dynamic range of 10^6. Furthermore, a high granular prototype based on bismuth germanate (BGO) cubic scintillation crystals has been developed. This high granularity enables detailed imaging of the particle showers, improving both energy resolution and particle identification. The prototype's performance is evaluated through cosmic ray testing, providing valuable data for optimizing the final calorimeter design for VLAST.

physics.ins-det↗

arXiv2025

A mobile high spatial-resolution Muography instrument based on large-area Micromegas detectors

Muon radiography is an imaging technique based on muon absorption in matter that allows measurement of internal details in hidden objects or structures. This technique relies on measuring cosmic-ray muons tracks accurately, which reflects the incoming muon flux from both the target object and the open sky. In this paper, we report on the construction of a high spatial resolution muography instrument based on Micromegas detectors. Using four layers of 400 mm ${\times}$ 400 mm Micromegas detectors, channel multiplexing circuits, and the versatile readout system, a moveable muography instrument named $\mu$STC-R400 was designed and constructed. Results show that the channel multiplexing circuits can resolve hit positions correctly, and the spatial resolution of the detector is approximately 190 ${\mu}$m. Experiments were conducted at an under-construction subway tunnel and outdoors near a mountain, demonstrating the ${\mu}$STC-R400's ability to maintain high spatial resolution outside the laboratory and its robustness in harsh environments.

physics.ins-det↗

arXiv2024

A Back-End Electronics Based on Fiber Communication for Small to Medium-Scale Physics Experiments

Many small and medium-sized physics experiments are being conducted worldwide. These experiments have similar requirements for readout electronics, especially the back-end electronics. Some experiments need a trigger logic unit(TLU) to provide timing and synchronous control signals. This paper introduces a back-end electronics design for small and medium-sized physics experiments; it adopts a daughter-motherboard structure integrated TLU function to provide greater flexibility. Different interfaces and protocols can be flexibly selected according to data bandwidth requirements. It supports 32 optical fiber interfaces based on a field-programmable gate array (FPGA) of normal IOs with 400Mbps of data bandwidth for each channel. At the same time, it supports 16 high-speed communication interfaces based on GTX port with several Gbps data bandwidth of each channel. For the TLU function, this design has 8 HDMI interfaces and one RJ45 interface to provide synchronous triggers and other control signals, and it has six analog LEMOs and four digital LEMOs to accept asynchronous signals from an external source. These design specifications can meet the needs of most small and medium-sized experiments. This set of back-end electronics has been successfully used in experiments such as PandaX-III, VLAST, and moungraphy. Moreover, it has successfully conducted beam tests with a readout of the data of VLAST detectors at CERN.

physics.ins-det↗

arXiv2024

A Compact Readout Electronics Based on Current Amplifier for Micromegas Detector in Muon Imaging

Muon imaging technology is an innovative imaging technique that can be applied in volcano imaging, heavy nuclear material detection, and archaeological research. The Micromegas detector is a promising choice for muon imaging due to its high spatial resolution and large area. However, the large number of readout channels poses a challenge for electronics. In this paper, a compact front-end electronics (FEE) for reading Micromegas detectors is presented. The electronics use the commercial current-to-digital readout chip, ADAS1128, which integrates 128 current amplifiers for multi-channel charge measurement. After verifying the basic performance of the electronics, the energy resolution was obtained with a radioactive source. Furthermore, a muon imaging system prototype was set up and its spatial resolution was evaluated in a test with cosmic ray muons. The system prototype can reconstruct the boundaries of sufficiently massive objects with a size of 2 cm in a scattering imaging test.

physics.ins-det↗

arXiv2024

A High Compression Ratio Channel Multiplexing Method for Micro-pattern Gaseous Detectors

The demand for a large number of readout channels has been a limiting factor for the application of Micro-pattern Gaseous Detectors (MPGDs) in achieving higher spatial resolution and larger detection areas. This challenge is further compounded by issues related to system integration, power consumption, and cost efficiency. To address these challenges, this study proposes two novel multiplexing methods based on Eulerian circuits. Mathematical calculations indicate that with $n$ electronics channels, up to $n \times (n-1)/2 - (n - 2)/2 + 1$ detector channels can be read out, where $n$ is even. Three types of multiplexing circuits were designed, implemented, and tested in combination with Micromegas detectors. Experimental results demonstrate that, for a multiplexing circuit with a factor of 8, the spatial resolution remains comparable to the direct readout method, while achieving a detection efficiency exceeding 94\%. For a circuit with a multiplexing factor of 16, although the spatial resolution shows a slight degradation, the detection efficiency remains above 93.6\%. These results demonstrate that the proposed multiplexing methods can significantly reduce the number of readout channels while maintaining an acceptable level of spatial resolution and detection efficiency. These findings highlight the potential of the proposed multiplexing techniques for applications in fields requiring high-resolution and cost-effective detector systems, such as cosmic-ray muon imaging.

physics.ins-det↗

arXiv2024

Unfolding environmental $γ$ flux spectrum with portable CZT detector

Environmental $γ$-rays constitute a crucial source of background in various nuclear, particle and quantum physics experiments. To evaluate the flux rate and the spectrum of $γ$ background, we have developed a novel and straightforward approach to reconstruct the environmental $γ$ flux spectrum by applying a portable CZT $γ$ detector and iterative Bayesian unfolding, which possesses excellent transferability for broader applications. In this paper, the calibration and GEANT4 Monte-Carlo modeling of the CZT detector, the unfolding procedure as well as the uncertainty estimation are demonstrated in detail. The reconstructed spectrum reveals an environmental $γ$ flux intensity of $3.3\pm 0.9\times 10^{7}$~ (m$^2\cdot$sr$\cdot$hour)$^{-1}$ ranging from 73 to 3033~keV, along with characteristic peaks primarily arising from $^{232}$Th series, $^{238}$U series and $^{40}$K. We also give an instance of background rate evaluation with the unfolded spectrum for validation of the approach.

physics.ins-det↗

arXiv2023

Development of a SciFi-based beam monitor for COMET

COMET is a leading experiment to search for coherent conversion of $μ^- \mathrm{N}\to e^- \mathrm{N}$ with a high-intensity pulsed muon beamline, produced by the innovative slow extraction techniques. Therefore, it is critical to measure the characteristics of the muon beam. We set up a Muon Beam Monitor (MBM), where scintillation fibers (SciFi) weaved in the cross shape are coupled to silicon photomultipliers (SiPM), to measure the spatial profile and timing structure of the extracted muon beam for COMET. The MBM detector has been tested successfully with a proton beamline in China Spallation Neutron Source (CSNS) and taken data with good performance in the commissioning run called COMET Phase-$α$. Experience of the MBM development, such as the mechanical structure and electronics readout, and its beam measurement results will be shared.

physics.ins-det↗

arXiv2023

ADENIUM -- A demonstrator for a next-generation beam telescope at DESY

High-resolution beam telescopes for charged particle tracking are one of the most important and equally demanding infrastructure items at test beam facilities. The main purpose of beam telescopes is to provide precise reference track information of beam particles to measure the performance of a device under test (DUT). In this report the development of the ADENIUM beam telescope (ALPIDE sensor based DESY Next test beam Instrument) as a demonstrator and prototype for a next-generation beam telescope is presented. The ADENIUM beam telescope features up to six pixelated reference planes framed by plastic scintillators for triggering. ADENIUM is capable of replacing the currently used EUDET-type beam telescopes without impacting existing DUT implementations due to the integration of the telescope DAQ into EUDAQ2. In this report the concept and design of the ADENIUM telescope as well as its performance are discussed. The telescope's pointing resolution is determined in different configurations. For an optimal setup at an momentum of 5.6 GeV with an ALPIDE as DUT, a resolution better than 3 um has been extracted. No rate limitations have been observed at the DESY II test beam.

physics.ins-det↗

arXiv2023

Development of a resource-efficient FPGA-based neural network regression model for the ATLAS muon trigger upgrades

This paper reports on the development of a resource-efficient FPGA-based neural network regression model for potential applications in the future hardware muon trigger system of the ATLAS experiment at the Large Hadron Collider (LHC). Effective real-time selection of muon candidates is the cornerstone of the ATLAS physics programme. With the planned ATLAS upgrades for the High Luminosity LHC, an entirely new FPGA-based hardware muon trigger system will be installed that will process full muon detector data within a 10 $μs$ latency window. The large FPGA devices planned for this upgrade should have sufficient spare resources to allow deployment of machine learning methods for improving identification of muon candidates and searching for new exotic particles. Our neural network regression model promises to improve rejection of the dominant source of background trigger events in the central detector region, which are due to muon candidates with low transverse momenta. This model was implemented in FPGA using 157 digital signal processors and about 5,000 lookup tables. The simulated network latency and deadtime are 122 and 25 ns, respectively, when implemented in the FPGA device using a 320 MHz clock frequency. Two other FPGA implementations were also developed to study the impact of design choices on resource utilisation and latency. The performance parameters of our FPGA implementation are well within the requirements of the future muon trigger system, therefore opening a possibility for deploying machine learning methods for future data taking by the ATLAS experiment.

physics.ins-det↗

arXiv2022

A low dead time, resource efficient encoding method for FPGA based high-resolution TDL TDCs

This paper presents a novel encoding method for fine time data of a tapped delay line (TDL) time-to-digital Converter (TDC). It is based on divide-and-conquer strategy, and has the advantage of significantly reducing logic resource utilization while retaining low dead-time performance. Furthermore, the problem of high bubble depth in advanced devices can be resolved with this method. Four examples are demonstrated, which were implemented in a Xilinx Artix-7 Field Programmable Gate Array (FPGA) device, and encoding method presented in this paper was employed to encode fine time data for normal TDL TDC, a half-length delay line TDC, and double-edge and four-edge wave union TDCs. Compared with TDCs from the latest published papers that adopt traditional encoders, the logic utilization of TDCs in this paper were reduced by a factor of 45% to 70% in different situations, while the encoding dead time can be restricted in one clock cycle. Acceptable resolutions of the demonstrated TDCs were also obtained, proving the functionality of the encoding method.

physics.space-ph↗

arXiv2021

A High Spatial Resolution Muon Tomography Prototype System based on Micromegas Detector

Cosmic ray muon has strong penetrating power and no ionizing radiation hazards, which makes it an ideal probe for detecting special nuclear materials. In this paper, a high spatial resolution muon tomography system based on Micromegas detectors is proposed to optimize the imaging time and quality. The proposed system includes eight Micromegas detectors based on the thermal bonding technique and a scalable readout system. In addition, a multiplexing method based on position encoding is developed to reduce the number of electronics channels by order of magnitude. The spatial resolution of the proposed system with encoding readout can reach a value of hundred micrometers. Finally, a tomography test is performed, and test results show that this proposed system can image 2-cm objects and distinguish different materials.

physics.ins-det↗

arXiv2020

Measurement of the neutron beam profile of the Back-n white neutron facility at CSNS with a Micromegas detector

The Back-n white neutron beam line, which uses back-streaming white neutrons from the spallation target of the China Spallation Neutron Source, is used for nuclear data measurements. A Micromegas-based neutron detector with two variants was specially developed to measure the beam spot distribution for this beam line. In this article, the design, fabrication, and characterization of the detector are described. The results of the detector performance tests are presented, which include the relative electron transparency, the gain and the gain uniformity, and the neutron beam profile reconstruction capability. The result of the first measurement of the Back-n neutron beam spot distribution is also presented.

physics.ins-det↗

arXiv2019

Measurements of differential and angle-integrated cross sections for the $^{10}$B($n, α$)$^{7}$Li reaction in the neutron energy range from 1.0 eV to 2.5 MeV

Differential and angle-integrated cross sections for the $^{10}$B($n, α$)$^{7}$Li, $^{10}$B($n, α$$_{0}$)$^{7}$Li and $^{10}$B($n, α$$_{1}$)$^{7}$Li$^{*}$ reactions have been measured at CSNS Back-n white neutron source. Two enriched (90%) $^{10}$B samples 5.0 cm in diameter and ~85.0 $μ$g/cm$^{2}$ in thickness each with an aluminum backing were prepared, and back-to-back mounted at the sample holder. The charged particles were detected using the silicon-detector array of the Light-charged Particle Detector Array (LPDA) system. The neutron energy E$_{n}$ was determined by TOF (time-of-flight) method, and the valid $α$ events were extracted from the E$_{n}$-Amplitude two-dimensional spectrum. With 15 silicon detectors, the differential cross sections of $α$-particles were measured from 19.2° to 160.8°. Fitted with the Legendre polynomial series, the ($n, α$) cross sections were obtained through integration. The absolute cross sections were normalized using the standard cross sections of the $^{10}$B($n, α$)$^{7}$Li reaction in the 0.3 - 0.5 MeV neutron energy region. The measurement neutron energy range for the $^{10}$B($n, α$)$^{7}$Li reaction is 1.0 eV $\le$ En < 2.5 MeV (67 energy points), and for the $^{10}$B($n, α$$_{0}$)$^{7}$Li and $^{10}$B($n, α$$_{1}$)$^{7}$Li$^{*}$ reactions is 1.0 eV $\le$ En < 1.0 MeV (59 energy points). The present results have been analyzed by the resonance reaction mechanism and the level structure of the $^{11}$B compound system, and compared with existing measurements and evaluations.

nucl-ex↗

arXiv2019

Calibration and Status of the 3D Imaging Calorimeter of DAMPE for Cosmic Ray Physics on Orbit

The DArk Matter Particle Explorer (DAMPE) developed in China was designed to search for evidence of dark matter particles by observing primary cosmic rays and gamma rays in the energy range from 5 GeV to 10 TeV. Since its launch in December 2015, a large quantity of data has been recorded. With the data set acquired during more than a year of operation in space, a precise time-dependent calibration for the energy measured by the BGO ECAL has been developed. In this report, the instrumentation and development of the BGO Electromagnetic Calorimeter (BGO ECAL) are briefly described. The calibration on orbit, including that of the pedestal, attenuation length, minimum ionizing particle peak, and dynode ratio, is discussed, and additional details about the calibration methods and performance in space are presented.

astro-ph.IM↗

arXiv2018

Readout Electronics for CEPC Semi-Digital Hadron Calorimeter Pre-prototype

CEPC (Circular Electron and Positron Collider) is a large experiment facility proposed by Chinese particle physics community. One of its running option is being the Higgs factory. Calorimeter is the main part of this experiment to measure the jet energy. Semi-digital hadron calorimeter (SDHCAL) is one of the options for the hadron measurement. GEM detector with its high position resolution and flexible configuration is one of the candidates for the active layer of the SDHCAL. The main purpose of this paper is to provide a feasible readout method for the GEM-based semi-digital hadron calorimeter. A small-scale prototype is designed and implemented, including front-end board (FEB) and data interface board (DIF). The prototype electronics has been tested. The equivalent RMS noise of all channels is below 0.35fC. The dynamic range is up to 500fC and the gain variation is less than 1%. The readout electronics is applied on a double-layer GEM detector with 1cm*1cm readout pad. Result indicates that the electronics works well with the detector. The detection efficiency of MIP is over 95% with 5fC threshold.

physics.ins-det↗

arXiv2018

Development of the Front-End Electronics for PandaX-III Prototype TPC

The Particle And Astrophysical Xenon Experiment III (PandaX-III) is an experiment to search for the Neutrinoless Double Beta Decay (NLDBD) using 200 kg radio-pure high-pressure gaseous xenon TPC with Micromegas detectors at both ends and cathode in the middle. A small-scale TPC equipped with 7 Microbulk Micromegas detectors is developed as the prototype detector. 128 channels are readout following an X-Y design with strips of 3 mm pitch (64 channels each direction) from one Micromegas module. Highly integrated front-end electronics composed of 4 front-end cards with 1024 readout channels is designed to readout the charge of Micromegas anode signals, digitize the waveform after shaping and send compressed data to the DCM board. The cornerstone of the front-end electronics is a 64-channel application specific integrated circuit which is based on a switched capacitor array. The integral nonlinearity of the front-end electronics is less than 1% with 1 pC. The noise (RMS) of each readout channel is less than 0.9 fC with 1 microsecond peaking time and 1 pC range. Using the radioactive sources 56 Fe and 137 Cs, joint-tests of front-end electronics with the prototype TPC were carried out and the hit map of 7 Micromegas has been reconstructed.

physics.ins-det↗