arXiv subjects

J. Mannhart

Publications and source records attributed to J. Mannhart.

53 records · Page 3Linked to original sources

arXiv2005

Focussing quantum states

Does the size of atoms present a lower limit to the size of electronic structures that can be fabricated in solids? This limit can be overcome by using devices that exploit quantum mechanical scattering of electron waves at atoms arranged in focussing geometries on selected surfaces. Calculations reveal that features smaller than a hydrogen atom can be obtained. These structures are potentially useful for device applications and offer a route to the fabrication of ultrafine and well defined tips for scanning tunneling microscopy.

cond-mat.other↗

arXiv2005

New Memory Concept for Superconducting Electronics

A new concept for nonvolatile superconducting memories is proposed. The devices combine ferromagnetic dots for the storage of the data and Josephson junctions for their readout. Good scalability is expected for large scale integration. First memory cells have been implemented using 3 $μ$m-Nb-technology and permalloy dots. Nonvolatile data storage at 300 K was demonstrated.

cond-mat.supr-con↗

arXiv2005

Simultaneous current-, force- and work function measurement with atomic resolution

The local work function of a surface determines the spatial decay of the charge density at the Fermi level normal to the surface. Here, we present a method that enables simultaneous measurements of local work function and tip-sample forces. A combined dynamic scanning tunneling microscope and atomic force microscope is used to measure the tunneling current between an oscillating tip and the sample in real time as a function of the cantilever's deflection. Atomically resolved work function measurements on a silicon (111)-($7\times 7$) surface are presented and related to concurrently recorded tunneling current- and force- measurements.

cond-mat.mtrl-sci↗

arXiv2005

Local spectroscopy and atomic imaging of tunneling current, forces and dissipation on graphite

Theory predicts that the currents in scanning tunneling microscopy (STM) and the attractive forces measured in atomic force microscopy (AFM) are directly related. Atomic images obtained in an attractive AFM mode should therefore be redundant because they should be \emph{similar} to STM. Here, we show that while the distance dependence of current and force is similar for graphite, constant-height AFM- and STM images differ substantially depending on distance and bias voltage. We perform spectroscopy of the tunneling current, the frequency shift and the damping signal at high-symmetry lattice sites of the graphite (0001) surface. The dissipation signal is about twice as sensitive to distance as the frequency shift, explained by the Prandtl-Tomlinson model of atomic friction.

cond-mat.mtrl-sci↗

arXiv2004

Quartett formation at (100)/(110)-interfaces of d-wave superconductors

Across a faceted (100)/(110) interface between two d-wave-superconductors the structure of the superconducting order parameter leads to an alternating sign of the local Josephson coupling. Describing the Cooper pair motion along and across the interface by a one-dimensional boson lattice model, we show that a small attractive interaction between the bosons boosts boson binding at the interface -- a phenomenon, which is intimately tied to the staggered sequence of 0- and Pi-junction contacts along the interface. We connect this finding to the recently observed h/4e oscillations in (100)/(110) SQUIDS of cuprate superconductors.

cond-mat.str-el↗

arXiv2004

Half - h/2e - Oscillations of SQUIDs

The current-voltage characteristics of Superconducting Quantum Interference Devices (SQUIDs) are known to modulate as a function of applied magnetic field with a period of one flux quantum $Φ_0=h$/2e. Here we report on the fabrication and properties of SQUIDs modulating with a period of $1/2\timesΦ_0$. The characteristics of these bicrystal SQUIDs are consistent with either a strong sin(2$ϕ$) component of the current-phase relation of the Josephson current, or with an interaction between the Cooper-pairs, causing an admixture of quartets to the condensate.

cond-mat.supr-con↗

arXiv2004

Robust dx2-y2 pairing symmetry in high-temperature superconductors

Although initially quite controversial, it has been widely accepted that the Cooper pairs in optimally doped cuprate superconductors have predominantly dx2-y2 wavefunction symmetry. The controversy has now shifted to whether the high-Tc pairing symmetry changes away from optimal doping. Here we present phase-sensitive tricrystal experiments on three cuprate systems: Y0.7Ca0.3Ba2Cu3O7-x (Ca-doped Y-123), La2-xSrxCuO4 (La-214) and Bi2Sr2CaCu2O8+x (Bi-2212),with doping levels covering the underdoped, optimal and overdoped regions. Our work implies that time-reversal invariant, predominantly dx2-y2 pairing symmetry is robust over a large variation in doping, and underscores the important role of on-site Coulomb repulsion in the making of high-temperature superconductivity.

cond-mat.supr-con↗

arXiv2003

Electronic Transport through YBCO Grain Boundary Interfaces between 4.2 K and 300 K

The current-induced dissipation in YBCO grain boundary tunnel junctions has been measured between 4.2 K and 300 K. It is found that the resistance of 45 degree (100)/(110) junctions decreases linearly by a factor of four when their temperature is increased from 100 K to 300 K. At the superconducting transition temperature Tc the grain boundary resistance of the normal state and of the superconducting state extrapolate to the same value.

cond-mat.supr-con↗

arXiv2003

Probing the shape of atoms in real space

The structure of single atoms in real space is investigated by scanning tunneling microscopy. Very high resolution is possible by a dramatic reduction of the tip-sample distance. The instabilities which are normally encountered when using small tip-sample distances are avoided by oscillating the tip of the scanning tunneling microscope vertically with respect to the sample. The surface atoms of Si(111)-(7 x 7) with their well-known electronic configuration are used to image individual samarium, cobalt, iron and silicon atoms. The resulting images resemble the charge density corresponding to 4f, 3d and 3p atomic orbitals.

cond-mat.mtrl-sci↗

arXiv2003

Signatures of polaronic excitations in quasi-one-dimensional LaTiO$_{3.41}$

The optical properties of quasi-one-dimensional metallic LaTiO$_{3.41}$ are studied for the polarization along the $a$ and $b$ axes. With decreasing temperature modes appear along both directions suggestive for a phase transition. The broadness of these modes along the conducting axis might be due to the coupling of the phonons to low-energy electronic excitations across an energy gap. We observe a pronounced midinfrared band with a temperature dependence consistent with (interacting) polaron models. The polaronic picture is corroborated by the presence of strong electron-phonon coupling and the temperature dependence of the dc conductivity.

cond-mat↗

arXiv2003

Extremely Small Energy Gap in the Quasi-One-Dimensional Conducting Chain Compound SrNbO$_{3.41}$

Resistivity, optical, and angle-resolved photoemission experiments reveal unusual one-dimensional electronic properties of highly anisotropic SrNbO$_{3.41}$. Along the conducting chain direction we find an extremely small energy gap of only a few meV at the Fermi level. A discussion in terms of typical 1D instabilities (Peierls, Mott-Hubbard) shows that neither seems to provide a satisfactory explanation for the unique properties of SrNbO$_{3.41}$.

cond-mat.str-el↗

arXiv2002

A possible solution of the grain boundary problem for applications of high-Tc superconductors

It is shown that the critical current density of high-Tc wires can be greatly enhanced by using a threefold approach, which consists of grain alignment, doping, and optimization of the grain architecture. According to model calculations, current densities of 4x10^6 A/cm2 can be achieved for an average grain alignment of 10 degree at 77K. Based on this approach, a road to competitive high-Tc cables is proposed.

cond-mat.supr-con↗

arXiv2002

Large grain boundary area superconductors

For many applications of polycrystalline high-Tc superconductors the small critical currents of the grain boundaries pose a severe problem. To solve this problem we derive novel designs for the microstructure of coated conductors.

cond-mat.supr-con↗

arXiv2002

Coated conductors containing grains with big aspect ratios

It is shown that the critical currents of high-Tc superconducting tapes fabricated by the coated conductor technologies are enhanced considerably if grain arrangements with large effective grain boundary areas are used. Increasing the aspect ratios of the grains reduces the deleterious effects of the grain boundaries. A practical road to competitive high-Tc cables is proposed.

cond-mat.supr-con↗

arXiv2001

Evidence of Doping-Dependent Pairing Symmetry in Cuprate Superconductors

Scanning tunneling spectroscopy (STS) studies reveal long-range spatial homogeneity and predominantly $d_{x^2-y^2}$-pairing spectral characteristics in under- and optimally doped $\rm YBa_2Cu_3O_{7-δ}$ superconductors, whereas STS on $\rm YBa_2(Cu_{0.9934}Zn_{0.0026}Mg_{0.004})_3O_{6.9}$ exhibits {\it microscopic} spatial modulations and strong scattering near the Zn or Mg impurity sites, together with global suppression of the pairing potential. In contrast, in overdoped $\rm (Y_{0.7}Ca_{0.3})Ba_2Cu_3O_{7-δ}$, $(d_{x^2-y^2}+s)$-pairing symmetry is found, suggesting significant changes in the superconducting ground-state at a critical doping value.

cond-mat.supr-con↗

arXiv2001

Imaging of atomic orbitals with the Atomic Force Microscope - experiments and simulations

Atomic force microscopy (AFM) is a mechanical profiling technique that allows to image surfaces with atomic resolution. Recent progress in reducing the noise of this technique has led to a resolution level where previously undetectable symmetries of the images of single atoms are observed. These symmetries are related to the nature of the interatomic forces. The Si(111)-(7x7) surface is studied by AFM with various tips and AFM images are simulated with chemical and electrostatic model forces. The calculation of images from the tip-sample forces is explained in detail and the implications of the imaging parameters are discussed. Because the structure of the Si(111)-(7x7) surface is known very well, the shape of the adatom images is used to determine the tip structure. The observability of atomic orbitals by AFM and scanning tunneling microscopy is discussed.

cond-mat.mtrl-sci↗

arXiv2001

Spatial homogeneity and doping dependence of quasiparticle tunneling spectra in cuprate superconductors

Scanning tunneling spectroscopy (STS) studies reveal long-range (~100 nm) spatial homogeneity in optimally and underdoped superconducting YBa_2Cu_3O_{7-δ} (YBCO) single crystals and thin films, and macroscopic spatial modulations in overdoped (Y_{0.7}Ca_{0.3})Ba_2Cu_3O_{7-δ} (Ca-YBCO) epitaxial films. In contrast, STS on an optimally doped YBa_2(Cu_{0.9934}Zn_{0.0026}Mg_{0.004})_3O_{6.9} single crystal exhibits strong spatial modulations and suppression of superconductivity over a microscopic scale near the Zn or Mg impurity sites, and the global pairing potential is also reduced relative to that of optimally doped YBCO, suggesting strong pair-breaking effects of the non-magnetic impurities. The spectral characteristics are consistent with d_{x^2-y^2} pairing symmetry for the optimally and underdoped YBCO, and with (d_{x^2-y^2}+s) for the overdoped Ca-YBCO. The doping-dependent pairing symmetry suggests interesting changes in the superconducting ground state, and is consistent with the presence of nodal quasiparticles for all doping levels. The maximum energy gap Δ_d is non-monotonic with the doping level, while the (2Δ_d/k_BT_c) ratio increases with decreasing doping. The similarities and contrasts between the spectra of YBCO and of Bi_2Sr_2CaCu_2O_{8+x} (Bi-2212) are discussed.

cond-mat.supr-con↗