arXiv subjects

Jintian Lin

Publications and source records attributed to Jintian Lin.

At least 55 records · Page 3Linked to original sources

arXiv2020

Polygon Coherent Modes in aWeakly Perturbed Whispering Gallery Microresonator for Efficient Second Harmonic, Optomechanic and Frequency Comb Generations

We observe high optical quality factor (Q) polygonal and star coherent optical modes in a lithium niobate microdisk. In contrast to the previous polygon modes achieved by deformed microcavities at lower mechanical and optical Q, we adopted weak perturbation from a tapered fiber for the polygon mode formation. The resulting high intracavity optical power of the polygon modes triggers second harmonic generation at high efficiency. With the combined advantage of high mechanical Q cavity optomechanical oscillation was observed for the first time. Finally, we observe frequency microcomb generation from the polygon modes with an ultra stable taper-on-disk coupling mechanism.

physics.optics↗

arXiv2020

High-index-contrast single-mode optical waveguides fabricated on lithium niobate by photolithography assisted chemo-mechanical etching (PLACE)

We report fabrication of low loss single mode waveguides on lithium niobate on insulator (LNOI) cladded by a layer of SiO2. Our technique, termed photolithography assisted chemo-mechanical etching (PLACE), relies on patterning of a chromium film into the mask shape by femtosecond laser micromachining and subsequent chemo-mechanical etching of the lithium niobate thin film. The high-index-contrast single mode waveguide is measured to have a propagation loss of 0.13 dB/cm. Furthermore, waveguide tapers are fabricated for boosting the coupling efficiency.

physics.app-ph↗

arXiv2020

Efficient light coupling between an ultra-low loss lithium niobate waveguide and an adiabatically tapered single mode optical fiber

A lithium niobate on insulator ridge waveguide allows constructing high-density photonic integrated circuits thanks to its small bending radius offered by the high index contrast. Meanwhile, the significant mode-field mismatch between an optical fiber and the single-mode lithium niobate waveguide leads to low coupling efficiencies. Here, we demonstrate, both numerically and experimentally, that the problem can be solved with a tapered single mode fiber of an optimized mode field profile. Numerical simulation shows that the minimum coupling losses for the TE and TM mode are 0.32 dB and 0.86 dB, respectively. Experimentally, though without anti-reflection coating, the measured coupling losses for TE and TM mode are 1.32 dB and 1.88 dB, respectively. Our technique paves a way for a broad range of on-chip lithium niobate applications.

physics.optics↗

arXiv2019

A compact and efficient three-dimensional microfluidic mixer

Microfluidic mixing is a fundamental functionality in most lab on a chip (LOC) systems,whereas realization of efficient mixing is challenging in microfluidic channels due to the small Reynolds numbers. Here, we design and fabricate a compact three-dimensional (3D) micromixer to enable efficient mixing at various flow rates. The performance of the fabricated micromixer was examined using blue and red inks. The extreme flexibility in fabricating microfluidic structures of arbitrary 3D geometries using femtosecond laser micromachining allows us to tackle the major disadvantageous effects for optimizing the mixing efficiency.

physics.app-ph↗

arXiv2019

Post-Disturbance Dynamic Frequency Features Prediction Based on Convolutional Neural Network

The significant imbalance between power generation and load caused by severe disturbance may make the power system unable to maintain a steady frequency. If the post-disturbance dynamic frequency features can be predicted and emergency controls are appropriately taken, the risk of frequency instability will be greatly reduced. In this paper, a predictive algorithm for post-disturbance dynamic frequency features is proposed based on convolutional neural network (CNN) . The operation data before and immediately after disturbance is used to construct the input tensor data of CNN, with the dynamic frequency features of the power system after the disturbance as the output. The operation data of the power system such as generators unbalanced power has spatial distribution characteristics. The electrical distance is presented to describe the spatial correlation of power system nodes, and the t-SNE dimensionality reduction algorithm is used to map the high-dimensional distance information of nodes to the 2-D plane, thereby constructing the CNN input tensor to reflect spatial distribution of nodes operation data on 2-D plane. The CNN with deep network structure and local connectivity characteristics is adopted and the network parameters are trained by utilizing the backpropagation-gradient descent algorithm. The case study results on an improved IEEE 39-node system and an actual power grid in USA shows that the proposed method can predict the lowest frequency of power system after the disturbance accurately and quickly.

eess.SP↗

arXiv2019

Efficient Electro-optical Tuning of Optical Frequency Microcomb on a Monolithically Integrated High-Q Lithium Niobate Microdisk

We demonstrate efficient tuning of a monolithically integrated lithium niobate microdisk (LN) optical frequency microcomb. Utilizing the high optical quality (Q) factor (i.e., Q~7.1*10^6) of the microdisk, the microcomb spans over a spectral bandwidth of ~200 nm at a pump power as low as 20.4 mW. Combining the large eletro-optic coefficient of LN and optimum design of the geometry of microelectrodes, we demonstrate electro-optical tuning of the comb with a spectral range of 400 pm and a tuning efficiency of ~38 pm/100V.

physics.optics↗

arXiv2019

Fabrication of a multifunctional photonic integrated chip on lithium niobate on insulator using femtosecond laser assisted chemo-mechanical polish

We report fabrication of a multifunctional photonic integrated chip on lithium niobate on insulate (LNOI), which is achieved by femtosecond laser assisted chemo-mechanical polish. We demonstrate a high extinction ratio beam splitter, a 1 * 6 optical switch, and a balanced 3 * 3 interferometer on the fabricated chip by reconfiguring the microelectrode array integrated with the multifunctional photonic circuit.

physics.app-ph↗

arXiv2019

High-precision measurement of a propagation loss of single-mode optical waveguides on lithium niobate on insulator

We demonstrate fabrication of single-mode optical waveguides on lithium niobate on insulator (LNOI) by optical patterning combined with chemo-mechanical polishing. The fabricated LNOI waveguides have a nearly symmetric mode profile of a mode field size of ~2.5 micron (full-width at half maximum). We develop a high-precision measurement approach by which the single mode waveguides are characterized to have a propagation loss of ~0.042 dB/cm.

physics.app-ph↗

arXiv2019

Three-dimensional laser printing of macro-scale glass objects at a micro-scale resolution

Three-dimensional (3D) printing has allowed for production of geometrically complex 3D objects with extreme flexibility, which is currently undergoing rapid expansions in terms of materials, functionalities, as well as areas of application. When attempting to print 3D microstructures in glass, femtosecond laser induced chemical etching (FLICE) has proved itself a powerful approach. Here, we demonstrate fabrication of macro-scale 3D glass objects of large heights up to ~3.8 cm with a well-balanced (i.e., lateral vs longitudinal) spatial resolution of ~20 μm. The remarkable accomplishment is achieved by revealing an unexplored regime in the interaction of ultrafast laser pulses with fused silica which results in aberration-free focusing of the laser pulses deeply inside fused silica.

physics.app-ph↗

arXiv2018

Real-time Electrical Tuning of an Optical Spring on a Monolithically Integrated Ultrahigh Q Lithium Nibote Microresonator

Cavity optomechanics, the study of the interplay between light and mechanical properties of matter, has triggered a wide range of groundbreaking researches from cavity quantum electrodynamics, label free single molecule detection to the creation of phonon laser. Using femtosecond laser direct writing followed by chemo-mechanical polishing, here we report an ultrahigh quality (Q~10^7) factor lithium niobate (LN) whispering gallery microresonator monolithically integrated with in-plane microelectrodes. Coherent regenerative optomechanical oscillation with an effective mechanical quality (Qm) factor as high as 2.86*10^8 is observed in air. We demonstrate real-time electrical tuning of the optomechanical frequency with an electro-mechanical tuning efficiency around -134 kHz/100V.

physics.optics↗

arXiv2018

Low-loss Lithium Niobate on Insulator (LNOI) Waveguides of a 10 cm-length and a Sub-nanometer Surface Roughness

We develop a technique for realizing lithium niobate on insulator (LNOI) waveguides of a multi-centimeter-length with a propagation loss as low as 0.027 dB/cm. Our technique relies on patterning a chromium (Cr) thin film coated on the top surface of LNOI into a hard mask with a femtosecond laser followed by the chemo-mechanical polishing for structuring the LNOI into the waveguides. The surface roughness on the waveguides is determined to be 0.452 nm with an atomic force microscope (AFM). The approach is compatible with other surface patterning technologies such as optical and electron beam lithographies or laser direct writing, enabling high-throughput manufacturing of large-scale LNOI-based photonic integrated circuits.

physics.app-ph↗

arXiv2018

Highly-efficient second and third harmonic generation in a monocrystalline lithium niobate microresonator

Nonlinear optics in whispering-gallery-mode (WGM) microresonators have attracted much attention. Owing to strong confinement of the light in a small volume, a WGM microresonator can dramatically boost the strength of light field, giving rise to enhancement of the nonlinear interactions of light with the resonator material. Here, we demonstrate highly efficient second harmonic generation (SHG) and third harmonic generation (THG) in an on-chip monocrystalline lithium niobate (LN) microresonator. Benefitting from a cyclic phase matching scheme for the transverse-electric WGMs, nonlinear wavelength conversion utilizing the largest second-order nonlinear coefficient d33, which has not been demonstrated until now despite of its obvious advantage, is successfully achieved in an X-cut LN microresonator. We obtain high conversion efficiencies in not only the SHG (3.8% mW^-1) but also the THG (0.3% mW^-2) realized through a cascaded sum-frequency process. Our results represent a major step toward the classical and quantum photonic integrated circuits.

physics.app-ph↗

arXiv2018

Lithium niobate micro-disk resonators of quality factors above 10^7

We report on fabrication of crystalline lithium niobate microresonators with quality factors above 10^7 as measured around 770 nm wavelength. Our technique relies on femtosecond laser micromachining for patterning a mask coated on the lithium niobate on insulate (LNOI) into a microdisk, followed by a chemo-mechanical polishing process for transferring the disk-shaped pattern to the LNOI. Nonlinear processes including second harmonic generation and Raman scattering have been demonstrated in the fabricated microdisk.

physics.app-ph↗

arXiv2018

Simultaneous generation of four-wave mixing and stimulated Raman scattering in coupled lithium niobate microdisks mediated by second harmonic generation

High quality lithium niobate thin film microresonators provide an ideal platform for on-chip nonlinear optics applications. However, the phase matching condition for efficient parametric process sets a high requirement for fabrication control. Here we demonstrate a photonic molecular structure composed of two strongly coupled lithium niobate microdisks of different diameters fabricated using femtosecond laser micromachining and focused ion beam milling. With a continuous wave excitation, rich nonlinear optical processes including cascaded four-wave mixing and stimulated Raman scattering were observed around the second harmonic wavelength. Our results indicate that the coupled microdisks form a superior system for nonlinear optical process.

physics.optics↗

arXiv2017

Fabrication of high quality factor lithium niobate double-disk using a femtosecond laser

We demonstrate fabrication of a high quality factor lithium niobate double-disk whispering-gallery microcavity using femtosecond laser assisted ion beam milling. Using this method, two vertically stacked 30-um-diameter disks with a 200-nm-gap are fabricated. With our device, an optical quality factor as high as 1.2*10^5 is demonstrated. Our approach is scalable to fabricate multiple disks on a single chip.

physics.app-ph↗

arXiv2017

Metal surface structuring with spatiotemporally focused femtosecond laser pulses

Femtosecond laser micromachining provides high precision and less thermal diffusion in surface structuring as a result of the ultrashort temporal duration and ultrahigh peak intensity of the femtosecond laser pulses. To increase the throughput of surface patterning, the focal spot size can be expanded with loose focusing, which, however, could lead to nonlinear self-focusing of the pulses when the pulses propagate in air. We solve the problem by use of spatiotemporally focused femtosecond laser pulses for ablation of metal surfaces, which gives rise to improved surface quality as compared with that obtained with the conventional focusing scheme.

physics.optics↗

arXiv2017

Monolithic integration of a high-quality factor lithium niobate microresonator with a free-standing membrane waveguide using femtosecond laser assisted ion beam writing (FLAIBW)

We demonstrate integrating a high quality factor lithium niobate microdisk resonator with a free-standing membrane waveguide. Our technique is based on femtosecond laser direct writing which produces the pre-structure, followed by focused ion beam milling which reduces the surface roughness of sidewall of the fabricated structure to nanometer scale. Efficient light coupling between the integrated waveguide and microdisk was achieved, and the quality factor of the microresonator was measured as high as 1.67*10^5.

physics.optics↗

arXiv2016

On-chip electro-optic tuning of a lithium niobate microresonator with integrated in-plane microelectrodes

We demonstrate electro-optic tuning of an on-chip lithium niobate microresonator with integrated in-plane microelectrodes. First two metallic microelectrodes on the substrate were formed via femtosecond laser process. Then a high-Q lithium niobate microresonator located between the microelectrodes was fabricated by femtosecond laser direct writing accompanied by focused ion beam milling. Due to the efficient structure designing, high electro-optical tuning coefficient of 3.41 pm/V was observed.

physics.optics↗